X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=src%2Fceph%2Fdoc%2Frados%2Fapi%2Flibrados.rst;fp=src%2Fceph%2Fdoc%2Frados%2Fapi%2Flibrados.rst;h=73d0e421ed33367942324220a632ebe22ccc0550;hb=812ff6ca9fcd3e629e49d4328905f33eee8ca3f5;hp=0000000000000000000000000000000000000000;hpb=15280273faafb77777eab341909a3f495cf248d9;p=stor4nfv.git diff --git a/src/ceph/doc/rados/api/librados.rst b/src/ceph/doc/rados/api/librados.rst new file mode 100644 index 0000000..73d0e42 --- /dev/null +++ b/src/ceph/doc/rados/api/librados.rst @@ -0,0 +1,187 @@ +============== + Librados (C) +============== + +.. highlight:: c + +`librados` provides low-level access to the RADOS service. For an +overview of RADOS, see :doc:`../../architecture`. + + +Example: connecting and writing an object +========================================= + +To use `Librados`, you instantiate a :c:type:`rados_t` variable (a cluster handle) and +call :c:func:`rados_create()` with a pointer to it:: + + int err; + rados_t cluster; + + err = rados_create(&cluster, NULL); + if (err < 0) { + fprintf(stderr, "%s: cannot create a cluster handle: %s\n", argv[0], strerror(-err)); + exit(1); + } + +Then you configure your :c:type:`rados_t` to connect to your cluster, +either by setting individual values (:c:func:`rados_conf_set()`), +using a configuration file (:c:func:`rados_conf_read_file()`), using +command line options (:c:func:`rados_conf_parse_argv`), or an +environment variable (:c:func:`rados_conf_parse_env()`):: + + err = rados_conf_read_file(cluster, "/path/to/myceph.conf"); + if (err < 0) { + fprintf(stderr, "%s: cannot read config file: %s\n", argv[0], strerror(-err)); + exit(1); + } + +Once the cluster handle is configured, you can connect to the cluster with :c:func:`rados_connect()`:: + + err = rados_connect(cluster); + if (err < 0) { + fprintf(stderr, "%s: cannot connect to cluster: %s\n", argv[0], strerror(-err)); + exit(1); + } + +Then you open an "IO context", a :c:type:`rados_ioctx_t`, with :c:func:`rados_ioctx_create()`:: + + rados_ioctx_t io; + char *poolname = "mypool"; + + err = rados_ioctx_create(cluster, poolname, &io); + if (err < 0) { + fprintf(stderr, "%s: cannot open rados pool %s: %s\n", argv[0], poolname, strerror(-err)); + rados_shutdown(cluster); + exit(1); + } + +Note that the pool you try to access must exist. + +Then you can use the RADOS data manipulation functions, for example +write into an object called ``greeting`` with +:c:func:`rados_write_full()`:: + + err = rados_write_full(io, "greeting", "hello", 5); + if (err < 0) { + fprintf(stderr, "%s: cannot write pool %s: %s\n", argv[0], poolname, strerror(-err)); + rados_ioctx_destroy(io); + rados_shutdown(cluster); + exit(1); + } + +In the end, you will want to close your IO context and connection to RADOS with :c:func:`rados_ioctx_destroy()` and :c:func:`rados_shutdown()`:: + + rados_ioctx_destroy(io); + rados_shutdown(cluster); + + +Asychronous IO +============== + +When doing lots of IO, you often don't need to wait for one operation +to complete before starting the next one. `Librados` provides +asynchronous versions of several operations: + +* :c:func:`rados_aio_write` +* :c:func:`rados_aio_append` +* :c:func:`rados_aio_write_full` +* :c:func:`rados_aio_read` + +For each operation, you must first create a +:c:type:`rados_completion_t` that represents what to do when the +operation is safe or complete by calling +:c:func:`rados_aio_create_completion`. If you don't need anything +special to happen, you can pass NULL:: + + rados_completion_t comp; + err = rados_aio_create_completion(NULL, NULL, NULL, &comp); + if (err < 0) { + fprintf(stderr, "%s: could not create aio completion: %s\n", argv[0], strerror(-err)); + rados_ioctx_destroy(io); + rados_shutdown(cluster); + exit(1); + } + +Now you can call any of the aio operations, and wait for it to +be in memory or on disk on all replicas:: + + err = rados_aio_write(io, "foo", comp, "bar", 3, 0); + if (err < 0) { + fprintf(stderr, "%s: could not schedule aio write: %s\n", argv[0], strerror(-err)); + rados_aio_release(comp); + rados_ioctx_destroy(io); + rados_shutdown(cluster); + exit(1); + } + rados_aio_wait_for_complete(comp); // in memory + rados_aio_wait_for_safe(comp); // on disk + +Finally, we need to free the memory used by the completion with :c:func:`rados_aio_release`:: + + rados_aio_release(comp); + +You can use the callbacks to tell your application when writes are +durable, or when read buffers are full. For example, if you wanted to +measure the latency of each operation when appending to several +objects, you could schedule several writes and store the ack and +commit time in the corresponding callback, then wait for all of them +to complete using :c:func:`rados_aio_flush` before analyzing the +latencies:: + + typedef struct { + struct timeval start; + struct timeval ack_end; + struct timeval commit_end; + } req_duration; + + void ack_callback(rados_completion_t comp, void *arg) { + req_duration *dur = (req_duration *) arg; + gettimeofday(&dur->ack_end, NULL); + } + + void commit_callback(rados_completion_t comp, void *arg) { + req_duration *dur = (req_duration *) arg; + gettimeofday(&dur->commit_end, NULL); + } + + int output_append_latency(rados_ioctx_t io, const char *data, size_t len, size_t num_writes) { + req_duration times[num_writes]; + rados_completion_t comps[num_writes]; + for (size_t i = 0; i < num_writes; ++i) { + gettimeofday(×[i].start, NULL); + int err = rados_aio_create_completion((void*) ×[i], ack_callback, commit_callback, &comps[i]); + if (err < 0) { + fprintf(stderr, "Error creating rados completion: %s\n", strerror(-err)); + return err; + } + char obj_name[100]; + snprintf(obj_name, sizeof(obj_name), "foo%ld", (unsigned long)i); + err = rados_aio_append(io, obj_name, comps[i], data, len); + if (err < 0) { + fprintf(stderr, "Error from rados_aio_append: %s", strerror(-err)); + return err; + } + } + // wait until all requests finish *and* the callbacks complete + rados_aio_flush(io); + // the latencies can now be analyzed + printf("Request # | Ack latency (s) | Commit latency (s)\n"); + for (size_t i = 0; i < num_writes; ++i) { + // don't forget to free the completions + rados_aio_release(comps[i]); + struct timeval ack_lat, commit_lat; + timersub(×[i].ack_end, ×[i].start, &ack_lat); + timersub(×[i].commit_end, ×[i].start, &commit_lat); + printf("%9ld | %8ld.%06ld | %10ld.%06ld\n", (unsigned long) i, ack_lat.tv_sec, ack_lat.tv_usec, commit_lat.tv_sec, commit_lat.tv_usec); + } + return 0; + } + +Note that all the :c:type:`rados_completion_t` must be freed with :c:func:`rados_aio_release` to avoid leaking memory. + + +API calls +========= + + .. autodoxygenfile:: rados_types.h + .. autodoxygenfile:: librados.h