X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=src%2Fceph%2Fdoc%2Frados%2Fapi%2Flibrados-intro.rst;fp=src%2Fceph%2Fdoc%2Frados%2Fapi%2Flibrados-intro.rst;h=8405f6e3968ae94e7d769721e72c787d2bbca25d;hb=812ff6ca9fcd3e629e49d4328905f33eee8ca3f5;hp=0000000000000000000000000000000000000000;hpb=15280273faafb77777eab341909a3f495cf248d9;p=stor4nfv.git diff --git a/src/ceph/doc/rados/api/librados-intro.rst b/src/ceph/doc/rados/api/librados-intro.rst new file mode 100644 index 0000000..8405f6e --- /dev/null +++ b/src/ceph/doc/rados/api/librados-intro.rst @@ -0,0 +1,1003 @@ +========================== + Introduction to librados +========================== + +The :term:`Ceph Storage Cluster` provides the basic storage service that allows +:term:`Ceph` to uniquely deliver **object, block, and file storage** in one +unified system. However, you are not limited to using the RESTful, block, or +POSIX interfaces. Based upon :abbr:`RADOS (Reliable Autonomic Distributed Object +Store)`, the ``librados`` API enables you to create your own interface to the +Ceph Storage Cluster. + +The ``librados`` API enables you to interact with the two types of daemons in +the Ceph Storage Cluster: + +- The :term:`Ceph Monitor`, which maintains a master copy of the cluster map. +- The :term:`Ceph OSD Daemon` (OSD), which stores data as objects on a storage node. + +.. ditaa:: + +---------------------------------+ + | Ceph Storage Cluster Protocol | + | (librados) | + +---------------------------------+ + +---------------+ +---------------+ + | OSDs | | Monitors | + +---------------+ +---------------+ + +This guide provides a high-level introduction to using ``librados``. +Refer to :doc:`../../architecture` for additional details of the Ceph +Storage Cluster. To use the API, you need a running Ceph Storage Cluster. +See `Installation (Quick)`_ for details. + + +Step 1: Getting librados +======================== + +Your client application must bind with ``librados`` to connect to the Ceph +Storage Cluster. You must install ``librados`` and any required packages to +write applications that use ``librados``. The ``librados`` API is written in +C++, with additional bindings for C, Python, Java and PHP. + + +Getting librados for C/C++ +-------------------------- + +To install ``librados`` development support files for C/C++ on Debian/Ubuntu +distributions, execute the following:: + + sudo apt-get install librados-dev + +To install ``librados`` development support files for C/C++ on RHEL/CentOS +distributions, execute the following:: + + sudo yum install librados2-devel + +Once you install ``librados`` for developers, you can find the required +headers for C/C++ under ``/usr/include/rados``. :: + + ls /usr/include/rados + + +Getting librados for Python +--------------------------- + +The ``rados`` module provides ``librados`` support to Python +applications. The ``librados-dev`` package for Debian/Ubuntu +and the ``librados2-devel`` package for RHEL/CentOS will install the +``python-rados`` package for you. You may install ``python-rados`` +directly too. + +To install ``librados`` development support files for Python on Debian/Ubuntu +distributions, execute the following:: + + sudo apt-get install python-rados + +To install ``librados`` development support files for Python on RHEL/CentOS +distributions, execute the following:: + + sudo yum install python-rados + +You can find the module under ``/usr/share/pyshared`` on Debian systems, +or under ``/usr/lib/python*/site-packages`` on CentOS/RHEL systems. + + +Getting librados for Java +------------------------- + +To install ``librados`` for Java, you need to execute the following procedure: + +#. Install ``jna.jar``. For Debian/Ubuntu, execute:: + + sudo apt-get install libjna-java + + For CentOS/RHEL, execute:: + + sudo yum install jna + + The JAR files are located in ``/usr/share/java``. + +#. Clone the ``rados-java`` repository:: + + git clone --recursive https://github.com/ceph/rados-java.git + +#. Build the ``rados-java`` repository:: + + cd rados-java + ant + + The JAR file is located under ``rados-java/target``. + +#. Copy the JAR for RADOS to a common location (e.g., ``/usr/share/java``) and + ensure that it and the JNA JAR are in your JVM's classpath. For example:: + + sudo cp target/rados-0.1.3.jar /usr/share/java/rados-0.1.3.jar + sudo ln -s /usr/share/java/jna-3.2.7.jar /usr/lib/jvm/default-java/jre/lib/ext/jna-3.2.7.jar + sudo ln -s /usr/share/java/rados-0.1.3.jar /usr/lib/jvm/default-java/jre/lib/ext/rados-0.1.3.jar + +To build the documentation, execute the following:: + + ant docs + + +Getting librados for PHP +------------------------- + +To install the ``librados`` extension for PHP, you need to execute the following procedure: + +#. Install php-dev. For Debian/Ubuntu, execute:: + + sudo apt-get install php5-dev build-essential + + For CentOS/RHEL, execute:: + + sudo yum install php-devel + +#. Clone the ``phprados`` repository:: + + git clone https://github.com/ceph/phprados.git + +#. Build ``phprados``:: + + cd phprados + phpize + ./configure + make + sudo make install + +#. Enable ``phprados`` in php.ini by adding:: + + extension=rados.so + + +Step 2: Configuring a Cluster Handle +==================================== + +A :term:`Ceph Client`, via ``librados``, interacts directly with OSDs to store +and retrieve data. To interact with OSDs, the client app must invoke +``librados`` and connect to a Ceph Monitor. Once connected, ``librados`` +retrieves the :term:`Cluster Map` from the Ceph Monitor. When the client app +wants to read or write data, it creates an I/O context and binds to a +:term:`pool`. The pool has an associated :term:`ruleset` that defines how it +will place data in the storage cluster. Via the I/O context, the client +provides the object name to ``librados``, which takes the object name +and the cluster map (i.e., the topology of the cluster) and `computes`_ the +placement group and `OSD`_ for locating the data. Then the client application +can read or write data. The client app doesn't need to learn about the topology +of the cluster directly. + +.. ditaa:: + +--------+ Retrieves +---------------+ + | Client |------------>| Cluster Map | + +--------+ +---------------+ + | + v Writes + /-----\ + | obj | + \-----/ + | To + v + +--------+ +---------------+ + | Pool |---------->| CRUSH Ruleset | + +--------+ Selects +---------------+ + + +The Ceph Storage Cluster handle encapsulates the client configuration, including: + +- The `user ID`_ for ``rados_create()`` or user name for ``rados_create2()`` + (preferred). +- The :term:`cephx` authentication key +- The monitor ID and IP address +- Logging levels +- Debugging levels + +Thus, the first steps in using the cluster from your app are to 1) create +a cluster handle that your app will use to connect to the storage cluster, +and then 2) use that handle to connect. To connect to the cluster, the +app must supply a monitor address, a username and an authentication key +(cephx is enabled by default). + +.. tip:: Talking to different Ceph Storage Clusters – or to the same cluster + with different users – requires different cluster handles. + +RADOS provides a number of ways for you to set the required values. For +the monitor and encryption key settings, an easy way to handle them is to ensure +that your Ceph configuration file contains a ``keyring`` path to a keyring file +and at least one monitor address (e.g,. ``mon host``). For example:: + + [global] + mon host = 192.168.1.1 + keyring = /etc/ceph/ceph.client.admin.keyring + +Once you create the handle, you can read a Ceph configuration file to configure +the handle. You can also pass arguments to your app and parse them with the +function for parsing command line arguments (e.g., ``rados_conf_parse_argv()``), +or parse Ceph environment variables (e.g., ``rados_conf_parse_env()``). Some +wrappers may not implement convenience methods, so you may need to implement +these capabilities. The following diagram provides a high-level flow for the +initial connection. + + +.. ditaa:: +---------+ +---------+ + | Client | | Monitor | + +---------+ +---------+ + | | + |-----+ create | + | | cluster | + |<----+ handle | + | | + |-----+ read | + | | config | + |<----+ file | + | | + | connect | + |-------------->| + | | + |<--------------| + | connected | + | | + + +Once connected, your app can invoke functions that affect the whole cluster +with only the cluster handle. For example, once you have a cluster +handle, you can: + +- Get cluster statistics +- Use Pool Operation (exists, create, list, delete) +- Get and set the configuration + + +One of the powerful features of Ceph is the ability to bind to different pools. +Each pool may have a different number of placement groups, object replicas and +replication strategies. For example, a pool could be set up as a "hot" pool that +uses SSDs for frequently used objects or a "cold" pool that uses erasure coding. + +The main difference in the various ``librados`` bindings is between C and +the object-oriented bindings for C++, Java and Python. The object-oriented +bindings use objects to represent cluster handles, IO Contexts, iterators, +exceptions, etc. + + +C Example +--------- + +For C, creating a simple cluster handle using the ``admin`` user, configuring +it and connecting to the cluster might look something like this: + +.. code-block:: c + + #include + #include + #include + #include + + int main (int argc, const char **argv) + { + + /* Declare the cluster handle and required arguments. */ + rados_t cluster; + char cluster_name[] = "ceph"; + char user_name[] = "client.admin"; + uint64_t flags; + + /* Initialize the cluster handle with the "ceph" cluster name and the "client.admin" user */ + int err; + err = rados_create2(&cluster, cluster_name, user_name, flags); + + if (err < 0) { + fprintf(stderr, "%s: Couldn't create the cluster handle! %s\n", argv[0], strerror(-err)); + exit(EXIT_FAILURE); + } else { + printf("\nCreated a cluster handle.\n"); + } + + + /* Read a Ceph configuration file to configure the cluster handle. */ + err = rados_conf_read_file(cluster, "/etc/ceph/ceph.conf"); + if (err < 0) { + fprintf(stderr, "%s: cannot read config file: %s\n", argv[0], strerror(-err)); + exit(EXIT_FAILURE); + } else { + printf("\nRead the config file.\n"); + } + + /* Read command line arguments */ + err = rados_conf_parse_argv(cluster, argc, argv); + if (err < 0) { + fprintf(stderr, "%s: cannot parse command line arguments: %s\n", argv[0], strerror(-err)); + exit(EXIT_FAILURE); + } else { + printf("\nRead the command line arguments.\n"); + } + + /* Connect to the cluster */ + err = rados_connect(cluster); + if (err < 0) { + fprintf(stderr, "%s: cannot connect to cluster: %s\n", argv[0], strerror(-err)); + exit(EXIT_FAILURE); + } else { + printf("\nConnected to the cluster.\n"); + } + + } + +Compile your client and link to ``librados`` using ``-lrados``. For example:: + + gcc ceph-client.c -lrados -o ceph-client + + +C++ Example +----------- + +The Ceph project provides a C++ example in the ``ceph/examples/librados`` +directory. For C++, a simple cluster handle using the ``admin`` user requires +you to initialize a ``librados::Rados`` cluster handle object: + +.. code-block:: c++ + + #include + #include + #include + + int main(int argc, const char **argv) + { + + int ret = 0; + + /* Declare the cluster handle and required variables. */ + librados::Rados cluster; + char cluster_name[] = "ceph"; + char user_name[] = "client.admin"; + uint64_t flags = 0; + + /* Initialize the cluster handle with the "ceph" cluster name and "client.admin" user */ + { + ret = cluster.init2(user_name, cluster_name, flags); + if (ret < 0) { + std::cerr << "Couldn't initialize the cluster handle! error " << ret << std::endl; + return EXIT_FAILURE; + } else { + std::cout << "Created a cluster handle." << std::endl; + } + } + + /* Read a Ceph configuration file to configure the cluster handle. */ + { + ret = cluster.conf_read_file("/etc/ceph/ceph.conf"); + if (ret < 0) { + std::cerr << "Couldn't read the Ceph configuration file! error " << ret << std::endl; + return EXIT_FAILURE; + } else { + std::cout << "Read the Ceph configuration file." << std::endl; + } + } + + /* Read command line arguments */ + { + ret = cluster.conf_parse_argv(argc, argv); + if (ret < 0) { + std::cerr << "Couldn't parse command line options! error " << ret << std::endl; + return EXIT_FAILURE; + } else { + std::cout << "Parsed command line options." << std::endl; + } + } + + /* Connect to the cluster */ + { + ret = cluster.connect(); + if (ret < 0) { + std::cerr << "Couldn't connect to cluster! error " << ret << std::endl; + return EXIT_FAILURE; + } else { + std::cout << "Connected to the cluster." << std::endl; + } + } + + return 0; + } + + +Compile the source; then, link ``librados`` using ``-lrados``. +For example:: + + g++ -g -c ceph-client.cc -o ceph-client.o + g++ -g ceph-client.o -lrados -o ceph-client + + + +Python Example +-------------- + +Python uses the ``admin`` id and the ``ceph`` cluster name by default, and +will read the standard ``ceph.conf`` file if the conffile parameter is +set to the empty string. The Python binding converts C++ errors +into exceptions. + + +.. code-block:: python + + import rados + + try: + cluster = rados.Rados(conffile='') + except TypeError as e: + print 'Argument validation error: ', e + raise e + + print "Created cluster handle." + + try: + cluster.connect() + except Exception as e: + print "connection error: ", e + raise e + finally: + print "Connected to the cluster." + + +Execute the example to verify that it connects to your cluster. :: + + python ceph-client.py + + +Java Example +------------ + +Java requires you to specify the user ID (``admin``) or user name +(``client.admin``), and uses the ``ceph`` cluster name by default . The Java +binding converts C++-based errors into exceptions. + +.. code-block:: java + + import com.ceph.rados.Rados; + import com.ceph.rados.RadosException; + + import java.io.File; + + public class CephClient { + public static void main (String args[]){ + + try { + Rados cluster = new Rados("admin"); + System.out.println("Created cluster handle."); + + File f = new File("/etc/ceph/ceph.conf"); + cluster.confReadFile(f); + System.out.println("Read the configuration file."); + + cluster.connect(); + System.out.println("Connected to the cluster."); + + } catch (RadosException e) { + System.out.println(e.getMessage() + ": " + e.getReturnValue()); + } + } + } + + +Compile the source; then, run it. If you have copied the JAR to +``/usr/share/java`` and sym linked from your ``ext`` directory, you won't need +to specify the classpath. For example:: + + javac CephClient.java + java CephClient + + +PHP Example +------------ + +With the RADOS extension enabled in PHP you can start creating a new cluster handle very easily: + +.. code-block:: php + + | + | | | + | write ack | | + |<--------------+---------------| + | | | + | write xattr | | + |---------------+-------------->| + | | | + | xattr ack | | + |<--------------+---------------| + | | | + | read data | | + |---------------+-------------->| + | | | + | read ack | | + |<--------------+---------------| + | | | + | remove data | | + |---------------+-------------->| + | | | + | remove ack | | + |<--------------+---------------| + + + +RADOS enables you to interact both synchronously and asynchronously. Once your +app has an I/O Context, read/write operations only require you to know the +object/xattr name. The CRUSH algorithm encapsulated in ``librados`` uses the +cluster map to identify the appropriate OSD. OSD daemons handle the replication, +as described in `Smart Daemons Enable Hyperscale`_. The ``librados`` library also +maps objects to placement groups, as described in `Calculating PG IDs`_. + +The following examples use the default ``data`` pool. However, you may also +use the API to list pools, ensure they exist, or create and delete pools. For +the write operations, the examples illustrate how to use synchronous mode. For +the read operations, the examples illustrate how to use asynchronous mode. + +.. important:: Use caution when deleting pools with this API. If you delete + a pool, the pool and ALL DATA in the pool will be lost. + + +C Example +--------- + + +.. code-block:: c + + #include + #include + #include + #include + + int main (int argc, const char **argv) + { + /* + * Continued from previous C example, where cluster handle and + * connection are established. First declare an I/O Context. + */ + + rados_ioctx_t io; + char *poolname = "data"; + + err = rados_ioctx_create(cluster, poolname, &io); + if (err < 0) { + fprintf(stderr, "%s: cannot open rados pool %s: %s\n", argv[0], poolname, strerror(-err)); + rados_shutdown(cluster); + exit(EXIT_FAILURE); + } else { + printf("\nCreated I/O context.\n"); + } + + /* Write data to the cluster synchronously. */ + err = rados_write(io, "hw", "Hello World!", 12, 0); + if (err < 0) { + fprintf(stderr, "%s: Cannot write object \"hw\" to pool %s: %s\n", argv[0], poolname, strerror(-err)); + rados_ioctx_destroy(io); + rados_shutdown(cluster); + exit(1); + } else { + printf("\nWrote \"Hello World\" to object \"hw\".\n"); + } + + char xattr[] = "en_US"; + err = rados_setxattr(io, "hw", "lang", xattr, 5); + if (err < 0) { + fprintf(stderr, "%s: Cannot write xattr to pool %s: %s\n", argv[0], poolname, strerror(-err)); + rados_ioctx_destroy(io); + rados_shutdown(cluster); + exit(1); + } else { + printf("\nWrote \"en_US\" to xattr \"lang\" for object \"hw\".\n"); + } + + /* + * Read data from the cluster asynchronously. + * First, set up asynchronous I/O completion. + */ + rados_completion_t comp; + err = rados_aio_create_completion(NULL, NULL, NULL, &comp); + if (err < 0) { + fprintf(stderr, "%s: Could not create aio completion: %s\n", argv[0], strerror(-err)); + rados_ioctx_destroy(io); + rados_shutdown(cluster); + exit(1); + } else { + printf("\nCreated AIO completion.\n"); + } + + /* Next, read data using rados_aio_read. */ + char read_res[100]; + err = rados_aio_read(io, "hw", comp, read_res, 12, 0); + if (err < 0) { + fprintf(stderr, "%s: Cannot read object. %s %s\n", argv[0], poolname, strerror(-err)); + rados_ioctx_destroy(io); + rados_shutdown(cluster); + exit(1); + } else { + printf("\nRead object \"hw\". The contents are:\n %s \n", read_res); + } + + /* Wait for the operation to complete */ + rados_aio_wait_for_complete(comp); + + /* Release the asynchronous I/O complete handle to avoid memory leaks. */ + rados_aio_release(comp); + + + char xattr_res[100]; + err = rados_getxattr(io, "hw", "lang", xattr_res, 5); + if (err < 0) { + fprintf(stderr, "%s: Cannot read xattr. %s %s\n", argv[0], poolname, strerror(-err)); + rados_ioctx_destroy(io); + rados_shutdown(cluster); + exit(1); + } else { + printf("\nRead xattr \"lang\" for object \"hw\". The contents are:\n %s \n", xattr_res); + } + + err = rados_rmxattr(io, "hw", "lang"); + if (err < 0) { + fprintf(stderr, "%s: Cannot remove xattr. %s %s\n", argv[0], poolname, strerror(-err)); + rados_ioctx_destroy(io); + rados_shutdown(cluster); + exit(1); + } else { + printf("\nRemoved xattr \"lang\" for object \"hw\".\n"); + } + + err = rados_remove(io, "hw"); + if (err < 0) { + fprintf(stderr, "%s: Cannot remove object. %s %s\n", argv[0], poolname, strerror(-err)); + rados_ioctx_destroy(io); + rados_shutdown(cluster); + exit(1); + } else { + printf("\nRemoved object \"hw\".\n"); + } + + } + + + +C++ Example +----------- + + +.. code-block:: c++ + + #include + #include + #include + + int main(int argc, const char **argv) + { + + /* Continued from previous C++ example, where cluster handle and + * connection are established. First declare an I/O Context. + */ + + librados::IoCtx io_ctx; + const char *pool_name = "data"; + + { + ret = cluster.ioctx_create(pool_name, io_ctx); + if (ret < 0) { + std::cerr << "Couldn't set up ioctx! error " << ret << std::endl; + exit(EXIT_FAILURE); + } else { + std::cout << "Created an ioctx for the pool." << std::endl; + } + } + + + /* Write an object synchronously. */ + { + librados::bufferlist bl; + bl.append("Hello World!"); + ret = io_ctx.write_full("hw", bl); + if (ret < 0) { + std::cerr << "Couldn't write object! error " << ret << std::endl; + exit(EXIT_FAILURE); + } else { + std::cout << "Wrote new object 'hw' " << std::endl; + } + } + + + /* + * Add an xattr to the object. + */ + { + librados::bufferlist lang_bl; + lang_bl.append("en_US"); + ret = io_ctx.setxattr("hw", "lang", lang_bl); + if (ret < 0) { + std::cerr << "failed to set xattr version entry! error " + << ret << std::endl; + exit(EXIT_FAILURE); + } else { + std::cout << "Set the xattr 'lang' on our object!" << std::endl; + } + } + + + /* + * Read the object back asynchronously. + */ + { + librados::bufferlist read_buf; + int read_len = 4194304; + + //Create I/O Completion. + librados::AioCompletion *read_completion = librados::Rados::aio_create_completion(); + + //Send read request. + ret = io_ctx.aio_read("hw", read_completion, &read_buf, read_len, 0); + if (ret < 0) { + std::cerr << "Couldn't start read object! error " << ret << std::endl; + exit(EXIT_FAILURE); + } + + // Wait for the request to complete, and check that it succeeded. + read_completion->wait_for_complete(); + ret = read_completion->get_return_value(); + if (ret < 0) { + std::cerr << "Couldn't read object! error " << ret << std::endl; + exit(EXIT_FAILURE); + } else { + std::cout << "Read object hw asynchronously with contents.\n" + << read_buf.c_str() << std::endl; + } + } + + + /* + * Read the xattr. + */ + { + librados::bufferlist lang_res; + ret = io_ctx.getxattr("hw", "lang", lang_res); + if (ret < 0) { + std::cerr << "failed to get xattr version entry! error " + << ret << std::endl; + exit(EXIT_FAILURE); + } else { + std::cout << "Got the xattr 'lang' from object hw!" + << lang_res.c_str() << std::endl; + } + } + + + /* + * Remove the xattr. + */ + { + ret = io_ctx.rmxattr("hw", "lang"); + if (ret < 0) { + std::cerr << "Failed to remove xattr! error " + << ret << std::endl; + exit(EXIT_FAILURE); + } else { + std::cout << "Removed the xattr 'lang' from our object!" << std::endl; + } + } + + /* + * Remove the object. + */ + { + ret = io_ctx.remove("hw"); + if (ret < 0) { + std::cerr << "Couldn't remove object! error " << ret << std::endl; + exit(EXIT_FAILURE); + } else { + std::cout << "Removed object 'hw'." << std::endl; + } + } + } + + + +Python Example +-------------- + +.. code-block:: python + + print "\n\nI/O Context and Object Operations" + print "=================================" + + print "\nCreating a context for the 'data' pool" + if not cluster.pool_exists('data'): + raise RuntimeError('No data pool exists') + ioctx = cluster.open_ioctx('data') + + print "\nWriting object 'hw' with contents 'Hello World!' to pool 'data'." + ioctx.write("hw", "Hello World!") + print "Writing XATTR 'lang' with value 'en_US' to object 'hw'" + ioctx.set_xattr("hw", "lang", "en_US") + + + print "\nWriting object 'bm' with contents 'Bonjour tout le monde!' to pool 'data'." + ioctx.write("bm", "Bonjour tout le monde!") + print "Writing XATTR 'lang' with value 'fr_FR' to object 'bm'" + ioctx.set_xattr("bm", "lang", "fr_FR") + + print "\nContents of object 'hw'\n------------------------" + print ioctx.read("hw") + + print "\n\nGetting XATTR 'lang' from object 'hw'" + print ioctx.get_xattr("hw", "lang") + + print "\nContents of object 'bm'\n------------------------" + print ioctx.read("bm") + + print "Getting XATTR 'lang' from object 'bm'" + print ioctx.get_xattr("bm", "lang") + + + print "\nRemoving object 'hw'" + ioctx.remove_object("hw") + + print "Removing object 'bm'" + ioctx.remove_object("bm") + + +Java-Example +------------ + +.. code-block:: java + + import com.ceph.rados.Rados; + import com.ceph.rados.RadosException; + + import java.io.File; + import com.ceph.rados.IoCTX; + + public class CephClient { + public static void main (String args[]){ + + try { + Rados cluster = new Rados("admin"); + System.out.println("Created cluster handle."); + + File f = new File("/etc/ceph/ceph.conf"); + cluster.confReadFile(f); + System.out.println("Read the configuration file."); + + cluster.connect(); + System.out.println("Connected to the cluster."); + + IoCTX io = cluster.ioCtxCreate("data"); + + String oidone = "hw"; + String contentone = "Hello World!"; + io.write(oidone, contentone); + + String oidtwo = "bm"; + String contenttwo = "Bonjour tout le monde!"; + io.write(oidtwo, contenttwo); + + String[] objects = io.listObjects(); + for (String object: objects) + System.out.println(object); + + io.remove(oidone); + io.remove(oidtwo); + + cluster.ioCtxDestroy(io); + + } catch (RadosException e) { + System.out.println(e.getMessage() + ": " + e.getReturnValue()); + } + } + } + + +PHP Example +----------- + +.. code-block:: php + +