X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=src%2Fceph%2Fdoc%2Fchangelog%2Fv0.48.3argonaut.txt;fp=src%2Fceph%2Fdoc%2Fchangelog%2Fv0.48.3argonaut.txt;h=0000000000000000000000000000000000000000;hb=7da45d65be36d36b880cc55c5036e96c24b53f00;hp=22f0dc9670eaea579d04190407f0c260f901e989;hpb=691462d09d0987b47e112d6ee8740375df3c51b2;p=stor4nfv.git diff --git a/src/ceph/doc/changelog/v0.48.3argonaut.txt b/src/ceph/doc/changelog/v0.48.3argonaut.txt deleted file mode 100644 index 22f0dc9..0000000 --- a/src/ceph/doc/changelog/v0.48.3argonaut.txt +++ /dev/null @@ -1,895 +0,0 @@ -commit 920f82e805efec2cae05b79c155c07df0f3ed5dd -Author: Gary Lowell -Date: Mon Jan 7 21:08:08 2013 -0800 - - v0.48.3argonaut - -commit 213e3559dd260a2e19324f2a671c808261249f96 -Author: Sage Weil -Date: Sun Jan 6 20:43:21 2013 -0800 - - osd: fix race in do_recovery() - - Verify that the PG is still RECOVERING or BACKFILL when we take the pg - lock in the recovery thread. This prevents a crash from an invalid - state machine event when the recovery queue races with a PG state change - (e.g., due to peering). - - Signed-off-by: Sage Weil - Reviewed-by: Samuel Just - -commit e410d1a066b906cad3103a5bbfa5b4509be9ac37 -Author: Samuel Just -Date: Fri Jan 4 21:19:45 2013 -0800 - - ReplicatedPG: requeue waiting_for_ondisk in apply_and_flush_repops - - Fixes: #3722 - Signed-off-by: Samuel Just - Reviewed-by: Sage Weil - -commit cd5f2bfdbb7fbf9237bef482845644cc41fa66de -Author: Josh Durgin -Date: Thu Nov 15 16:20:33 2012 -0800 - - ObjectCacher: fix off-by-one error in split - - This error left a completion that should have been attached - to the right BufferHead on the left BufferHead, which would - result in the completion never being called unless the buffers - were merged before it's original read completed. This would cause - a hang in any higher level waiting for a read to complete. - - The existing loop went backwards (using a forward iterator), - but stopped when the iterator reached the beginning of the map, - or when a waiter belonged to the left BufferHead. - - If the first list of waiters should have been moved to the right - BufferHead, it was skipped because at that point the iterator - was at the beginning of the map, which was the main condition - of the loop. - - Restructure the waiters-moving loop to go forward in the map instead, - so it's harder to make an off-by-one error. - - Possibly-fixes: #3286 - Signed-off-by: Josh Durgin - (cherry picked from commit 2e862f4d183d8b57b43b0777737886f18f68bf00) - -commit 802c486fd0913e9fe58ae7ff72df135f99712358 -Author: Sage Weil -Date: Fri Jan 4 11:07:48 2013 -0800 - - config: change default log_max_recent to 10,000 - - Commit c34e38bcdc0460219d19b21ca7a0554adf7f7f84 meant to do this but got - the wrong number of zeros. - - Signed-off-by: Sage Weil - -commit 39a734fbf34ccd121f17023bcec814e61c8bdaab -Author: Sage Weil -Date: Thu Jan 3 17:15:07 2013 -0800 - - os/FileStore: fix non-btrfs op_seq commit order - - The op_seq file is the starting point for journal replay. For stable btrfs - commit mode, which is using a snapshot as a reference, we should write this - file before we take the snap. We normally ignore current/ contents anyway. - - On non-btrfs file systems, however, we should only write this file *after* - we do a full sync, and we should then fsync(2) it before we continue - (and potentially trim anything from the journal). - - This fixes a serious bug that could cause data loss and corruption after - a power loss event. For a 'kill -9' or crash, however, there was little - risk, since the writes were still captured by the host's cache. - - Fixes: #3721 - Signed-off-by: Sage Weil - Reviewed-by: Samuel Just - (cherry picked from commit 28d59d374b28629a230d36b93e60a8474c902aa5) - -commit 49416619d733572368e5d2ba7f2b34150c754b23 -Author: Sage Weil -Date: Fri Dec 28 13:07:18 2012 -0800 - - log: broadcast cond signals - - We were using a single cond, and only signalling one waiter. That means - that if the flusher and several logging threads are waiting, and we hit - a limit, we the logger could signal another logger instead of the flusher, - and we could deadlock. - - Similarly, if the flusher empties the queue, it might signal only a single - logger, and that logger could re-signal the flusher, and the other logger - could wait forever. - - Intead, break the single cond into two: one for loggers, and one for the - flusher. Always signal the (one) flusher, and always broadcast to all - loggers. - - Backport: bobtail, argonaut - Signed-off-by: Sage Weil - Reviewed-by: Dan Mick - (cherry picked from commit 813787af3dbb99e42f481af670c4bb0e254e4432) - -commit f8bb4814d0fd7e08c9b6cdcde02940bf1b42cadd -Author: Sage Weil -Date: Wed Jan 2 13:58:44 2013 -0800 - - log: fix locking typo/stupid for dump_recent() - - We weren't locking m_flush_mutex properly, which in turn was leading to - racing threads calling dump_recent() and garbling the crash dump output. - - Backport: bobtail, argonaut - Signed-off-by: Sage Weil - Reviewed-by: Dan Mick - (cherry picked from commit 43cba617aa0247d714632bddf31b9271ef3a1b50) - -commit 9483a032f750572586f146c696ec6501d3df0383 -Author: Sage Weil -Date: Thu Dec 27 16:06:24 2012 -0800 - - init-ceph: fix status version check across machines - - The local state isn't propagated into the backtick shell, resulting in - 'unknown' for all remote daemons. Avoid backticks altogether. - - Signed-off-by: Sage Weil - (cherry picked from commit 6c7b667badc5e7608b69c533a119a2afc062e257) - -commit 8fef9360fe949fbf4ee6e468c36cc1c84b369b6e -Author: Travis Rhoden -Date: Mon Aug 20 13:29:11 2012 -0700 - - init-ceph: use SSH in "service ceph status -a" to get version - - When running "service ceph status -a", a version number was never - returned for remote hosts, only for the local. This was because - the command to query the version number didn't use the do_cmd - function, which is responsible for running the command over SSH - when needed. - - Modify the ceph init.d script to use do_cmd for querying the - Ceph version. - - Signed-off-by: Travis Rhoden - (cherry picked from commit 60fdb6fda6233b01dae4ed8a34427d5960840b84) - -commit c34e38bcdc0460219d19b21ca7a0554adf7f7f84 -Author: Sage Weil -Date: Wed Nov 28 13:00:36 2012 -0800 - - log: 10,000 recent log entries - - This is what we were (wrongly) doing before, so there are no memory - utilization surprises. - - Signed-off-by: Sage Weil - (cherry picked from commit 78286b1403a5e0f14f95fe6b92f2fdb163e909f1) - -commit 4daede79f578cccd340210752f912e685b1ff03d -Author: Sage Weil -Date: Wed Nov 28 12:59:43 2012 -0800 - - log: fix log_max_recent config - - - - Signed-off-by: Sage Weil - (cherry picked from commit 4de7748b72d4f90eb1197a70015c199c15203354) - -commit fdae0552a0b8b1a634775609b473aff9221904f3 -Author: Sage Weil -Date: Thu Dec 20 13:48:06 2012 -0800 - - log: fix flush/signal race - - We need to signal the cond in the same interval where we hold the lock - *and* modify the queue. Otherwise, we can have a race like: - - queue has 1 item, max is 1. - A: enter submit_entry, signal cond, wait on condition - B: enter submit_entry, signal cond, wait on condition - C: flush wakes up, flushes 1 previous item - A: retakes lock, enqueues something, exits - B: retakes lock, condition fails, waits - -> C is never woken up as there are 2 items waiting - - Signed-off-by: Sage Weil - Reviewed-by: Dan Mick - (cherry picked from commit 50914e7a429acddb981bc3344f51a793280704e6) - -commit bdcf6647dec05617d3da46ad00459498ede94f1d -Author: Gary Lowell -Date: Fri Dec 21 17:12:07 2012 -0800 - - .gitignore: Add ar-lib to ignore list - -commit 51a900cfd7cc009f03fdb80be028015fc34547d2 -Author: Gary Lowell -Date: Fri Dec 21 16:55:27 2012 -0800 - - autogen.sh: Create m4 directory for leveldb - - Signed-off-by: Gary Lowell - -commit 74473bb667df0ee0bb1adc6c43242733b80aa10d -Author: Gary Lowell -Date: Fri Dec 21 16:17:33 2012 -0800 - - leveldb: Update submodule - - Signed-off-by: Gary Lowell - -commit bc4f74c7b9ec4e6bbcf4ab4ab68a82a69b8eaca5 -Author: Gary Lowell -Date: Thu Dec 20 16:49:32 2012 -0800 - - ceph.spec.in: Fedora builds debuginfo by default. - - Signed-off-by: Gary Lowell - -commit 3ed2d59e98494a0da29f4bb8537471237a6f8e93 -Author: Yehuda Sadeh -Date: Wed Dec 19 17:07:18 2012 -0800 - - rgw: fix error handling with swift - - Fixes: #3649 - verify_swift_token returns a bool and not an int. - - Signed-off-by: Yehuda Sadeh - -commit dfd310368267df848f2b65cc536b4ffcb039d353 -Author: Sam Lang -Date: Mon Sep 24 09:55:25 2012 -0700 - - client: Fix for #3184 cfuse segv with no keyring - - Fixes bug #3184 where the ceph-fuse client segfaults if authx is - enabled but no keyring file is present. This was due to the - client->init() return value not getting checked. - - Signed-off-by: Sam Lang - (cherry picked from commit 47983df4cbd31f299eef896b4612d3837bd7c7bd) - -commit acebcce91448421c34a72850a380fcd1aabe9f41 -Author: Joao Eduardo Luis -Date: Tue Oct 9 21:25:54 2012 +0100 - - mon: Monitor: resolve keyring option to a file before loading keyring - - Otherwise our keyring default location, or any other similarly formatted - location, will be taken as the actual location for the keyring and fail. - - Reported-by: tziOm (at) #ceph - Fixes: 3276 - Backport: argonaut - - Signed-off-by: Joao Eduardo Luis - (cherry picked from commit 7ef0df25e001bfae303feb3ae36514608767b1f2) - -commit 7ab00a796d2233c3804f52fbba16c2f3ed0c297b -Author: Gary Lowell -Date: Wed Dec 5 19:39:11 2012 -0800 - - .gitignore: Add m4 macro directories to ignore list - -commit b781ac00e16fd802b6e055dd9d453271db6efa39 -Author: Gary Lowell -Date: Thu Nov 8 12:43:24 2012 -0800 - - build: Add RPM release string generated from git describe. - - Fix for bug 3451. Use the commit count and sha1 from git describe to - construct a release string for rpm packages. - - Conflicts: - - configure.ac - -commit f60c9b6600a85b840a02e145bac77326d60fd03f -Author: Gary Lowell -Date: Fri Nov 9 13:28:13 2012 -0800 - - ceph.spec.in: Build debuginfo subpackage. - - This is a partial fix for bug 3471. Enable building of debuginfo package. - Some distributions enable this automatically by installing additional rpm - macros, on others it needs to be explicity added to the spec file. - -commit 7fbf9476cb44ce256f4bb2366f46fa20cb570eda -Author: Yehuda Sadeh -Date: Mon Dec 3 14:32:28 2012 -0800 - - rgw: fix swift auth concurrency issue - - Fixes: #3565 - Originally ops were using static structures, but that - has since changed. Switching swift auth handler to do - the same. - - Signed-off-by: Yehuda Sadeh - -commit 0639cd9c479d69b077175f0385eb569ebb839349 -Author: Yehuda Sadeh -Date: Thu Nov 29 13:39:22 2012 -0800 - - rgw: fix rgw_tools get_obj() - - The original implementation broke whenever data exceeded - the chunk size. Also don't keep cache for objects that - exceed the chunk size as cache is not designed for - it. Increased chunk size to 512k. - - Signed-off-by: Yehuda Sadeh - -commit 84983387a220a29540aca64af774bbe7bc6b5ee6 -Author: Yehuda Sadeh -Date: Thu Nov 29 12:47:59 2012 -0800 - - rgw: fix PUT acls - - This fixes a regression introduced at - 17e4c0df44781f5ff1d74f3800722452b6a0fc58. The original - patch fixed error leak, however it also removed the - operation's send_response() call. - - Signed-off-by: Yehuda Sadeh - -commit 6c1e2b663227cadff4255db3321976882df6b261 -Author: Yehuda Sadeh -Date: Mon Nov 19 17:10:11 2012 -0800 - - rgw: fix xml parser leak - - Signed-off-by: Yehuda Sadeh - (cherry picked from commit f86522cdfcd81b2d28c581ac8b8de6226bc8d1a4) - -commit 17e4c0df44781f5ff1d74f3800722452b6a0fc58 -Author: Yehuda Sadeh -Date: Mon Nov 19 16:52:38 2012 -0800 - - rgw: fix memory leaks - - Signed-off-by: Yehuda Sadeh - (cherry picked from commit 98a04d76ebffa61c3ba4b033cdd57ac57b2f29f3) - - Conflicts: - src/rgw/rgw_op.cc - src/rgw/rgw_op.h - -commit cd18b9f43cce68ac3d8f109e82a5b603f9caad9b -Author: Yehuda Sadeh -Date: Wed Nov 7 13:21:15 2012 -0800 - - rgw: don't convert object mtime to UTC - - Fixes: #3452 - When we read object info, don't try to convert mtime to - UTC, it's already in UTC. - - Signed-off-by: Yehuda Sadeh - -commit ddb40dec6e8d930fd63a71ef1c98279d6472e3e4 -Author: Yehuda Sadeh -Date: Wed Nov 14 11:30:34 2012 -0800 - - rgw: relax date format check - - Don't try to parse beyond the GMT or UTC. Some clients use - special date formatting. If we end up misparsing the date - it'll fail in the authorization, so don't need to be too - restrictive. - - Signed-off-by: Yehuda Sadeh - -commit e35e7e2bcb749e3ee00f1f93bc6b17bde8329414 -Author: Sage Weil -Date: Tue Oct 30 14:17:56 2012 -0700 - - ceph-disk-activate: avoid duplicating mounts if already activated - - If the given device is already mounted at the target location, do not - mount --move it again and create a bunch of dup entries in the /etc/mtab - and kernel mount table. - - Signed-off-by: Sage Weil - (cherry picked from commit c435d314caeb5424c1f4482ad02f8a085317ad5b) - -commit 0c9bbb3b4b4dbe6f0a12960785e35af9c748701a -Author: Sage Weil -Date: Thu Oct 25 21:21:18 2012 -0700 - - ceph-disk-prepare: poke kernel into refreshing partition tables - - Prod the kernel to refresh the partition table after we create one. The - partprobe program is packaged with parted, which we already use, so this - introduces no new dependency. - - Signed-off-by: Sage Weil - (cherry picked from commit 402e1f5319a52c309eca936081fddede1f107268) - -commit b4004806ec387915ba4e039b9bc1c563273ef08f -Author: Sage Weil -Date: Thu Oct 25 21:20:21 2012 -0700 - - ceph-disk-prepare: fix journal partition creation - - The end value needs to have + to indicate it is relative to wherever the - start is. - - Signed-off-by: Sage Weil - (cherry picked from commit 2e32a0ee2d9e2a3bf5b138f50efc5fba8d5b8660) - -commit efac1bb19f1ca3851c7b51d96cb4e82d8d142a45 -Author: Sage Weil -Date: Thu Oct 25 18:14:47 2012 -0700 - - ceph-disk-prepare: assume parted failure means no partition table - - If the disk has no valid label we get an error like - - Error: /dev/sdi: unrecognised disk label - - Assume any error we get is that and go with an id label of 1. - - Signed-off-by: Sage Weil - (cherry picked from commit 8921fc7c7bc28fb98334c06f1f0c10af58085085) - -commit 39b9da403541617fb088aa4ae03925850aa2de65 -Merge: 83ab366 8c115d3 -Author: Sage Weil -Date: Mon Nov 12 11:24:00 2012 -0800 - - Merge remote-tracking branch 'gh/wip-mds-stable' into stable - -commit 8c115d3e81543a4c723bae217ba5b9d2c0e988f7 -Author: Sage Weil -Date: Fri Nov 9 05:28:12 2012 -0800 - - mds: re-try_set_loner() after doing evals in eval(CInode*, int mask) - - Consider a case where current loner is A and wanted loner is B. - At the top of the function we try to set the loner, but that may fail - because we haven't processed the gathered caps yet for the previous - loner. In the body we do that and potentially drop the old loner, but we - do not try_set_loner() again on the desired loner. - - Try after our drop. If it succeeds, loop through the eval's one more time - so that we can issue caps approriately. - - This fixes a hang induced by a simple loop like: - - while true ; do echo asdf >> mnt.a/foo ; tail mnt.b/foo ; done & - while true ; do ls mnt.a mnt.b ; done - - (The second loop may not be necessary.) - - Signed-off-by: Sage Weil - -commit 1a23bd6981e2a308be4a905021453a6d5feac9e3 -Author: Samuel Just -Date: Fri Jul 13 14:23:27 2012 -0700 - - CompatSet: users pass bit indices rather than masks - - CompatSet users number the Feature objects rather than - providing masks. Thus, we should do - - mask |= (1 << f.id) rather than mask |= f.id. - - In order to detect old, broken encodings, the lowest - bit will be set in memory but not set in the encoding. - We can reconstruct the correct mask from the names map. - - This bug can cause an incompat bit to not be detected - since 1|2 == 1|2|3. - - fixes: #2748 - - Signed-off-by: Samuel Just - -commit 83ab36655f397b7d781a611b4d82679c8484710f -Author: Gary Lowell -Date: Wed Nov 7 12:41:10 2012 -0800 - - ceph.spec.in: Remove ceph version requirement from ceph-fuse package. - - The ceph-fuse rpm package now only requires ceph as a pre-req, not a specific - version. - -commit 578b5764d5b26d190c295da88c1be5f0c77682a7 -Author: Yehuda Sadeh -Date: Wed Oct 24 13:15:46 2012 -0700 - - rgw: fix multipart overwrite - - Fixes: #3400 - Removed a few lines of code that prematurely created the head - part of the final object (before creating the manifest). - - backport:argonaut - Signed-off-by: Yehuda Sadeh - -commit 96888ddf154231daa6c7138bb2b97674771cc610 -Author: Sage Weil -Date: Mon Nov 5 23:27:13 2012 -0800 - - mds: move to from loner -> mix if *anyone* wants rd|wr - - We were either going to MIX or SYNC depending on whether non-loners wanted - to read/write, but it may be that the loner wants to if our logic for - choosing loner vs not longer is based on anything other that just rd|wr - wanted. - - Signed-off-by: Sage Weil - -commit b940d7750d14285fc85ce63b0f0444b58ad3ad93 -Author: Sage Weil -Date: Mon Nov 5 23:26:09 2012 -0800 - - mds: base loner decision on wanted RD|WR|EXCL, not CACHE|BUFFER - - Observed instance where one client wanted the Fc cap and prevented the - loner from getting RD|WR caps. - - Signed-off-by: Sage Weil - -commit 7a82a3214a38cbc7b5750adba23b760a4f51643a -Author: Sage Weil -Date: Tue Oct 30 09:00:11 2012 -0700 - - osd: make pool_snap_info_t encoding backward compatible - - Way back in fc869dee1e8a1c90c93cb7e678563772fb1c51fb (v0.42) when we redid - the osd type encoding we forgot to make this conditionally encode the old - format for old clients. In particular, this means that kernel clients - will fail to decode the osdmap if there is a rados pool with a pool-level - snapshot defined. - - Fixes: #3290 - Signed-off-by: Sage Weil - - Conflicts: - - src/test/encoding/types.h - -commit 8d7ca76182fdc04aaf8b698afbbd2d9b22e07fdc -Author: Yan, Zheng -Date: Fri Sep 7 13:49:27 2012 +0800 - - osd/OSD.cc: Fix typo in OSD::heartbeat_check() - - The check 'p->second.last_tx > cutoff' should always be false - since last_tx is periodically updated by OSD::heartbeat() - - Signed-off-by: Yan, Zheng - Signed-off-by: Sage Weil - -commit fc2b3ced4f7ed8d6e065c159fbeb8670fcdaca2a -Author: Yehuda Sadeh -Date: Mon Oct 22 16:52:11 2012 -0700 - - rgw: dump an error message if FCGX_Accept fails - - Adding missing debug info. - - Signed-off-by: Yehuda Sadeh - -commit d9b51b3b7011f4551fe27e33301b26cd23a72378 -Author: Sage Weil -Date: Mon Oct 22 15:38:30 2012 -0700 - - workqueue: make debug output include active threads - - Include active thread count in threadpool debug output. - - Signed-off-by: Sage Weil - -commit 852e27d3e19239a696fa693e2a30c3226d27a611 -Author: Yehuda Sadeh -Date: Mon Oct 22 13:16:59 2012 -0700 - - rgw: don't continue processing of GET request on error - - Fixes #3381 - We continued processing requests long after the client - has died. This fix appliese to both s3 and swift. - - backport: argonaut - Signed-off-by: Yehuda Sadeh - -commit 5f2b9b451da5a96fdbf9cf292648feb40dc13d28 -Author: Sage Weil -Date: Fri Oct 19 08:46:19 2012 -0700 - - osd: be quiet about watches - - Useless log noise. - - Signed-off-by: Sage Weil - -commit ea42eb1f7866fed0e843257ce05e34503fd0129c -Author: Sage Weil -Date: Wed Oct 17 17:44:12 2012 -0700 - - addr_parsing: make , and ; and ' ' all delimiters - - Instead of just ,. Currently "foo.com, bar.com" will fail because of the - space after the comma. This patches fixes that, and makes all delim - chars interchangeable. - - Signed-off-by: Sage Weil - -commit b0164d9902c834c95187f6b277f58a30d26cc4d3 -Author: Tommi Virtanen -Date: Fri Oct 5 10:57:42 2012 -0700 - - ceph-disk-prepare, debian/control: Support external journals. - - Previously, ceph-disk-* would only let you use a journal that was a - file inside the OSD data directory. With this, you can do: - - ceph-disk-prepare /dev/sdb /dev/sdb - - to put the journal as a second partition on the same disk as the OSD - data (might save some file system overhead), or, more interestingly: - - ceph-disk-prepare /dev/sdb /dev/sdc - - which makes it create a new partition on /dev/sdc to use as the - journal. Size of the partition is decided by $osd_journal_size. - /dev/sdc must be a GPT-format disk. Multiple OSDs may share the same - journal disk (using separate partitions); this way, a single fast SSD - can serve as journal for multiple spinning disks. - - The second use case currently requires parted, so a Recommends: for - parted has been added to Debian packaging. - - Closes: #3078 - Closes: #3079 - Signed-off-by: Tommi Virtanen - -commit 5a3076fd51706e32bc55b734099037520299003b -Author: Yehuda Sadeh -Date: Mon Oct 15 09:43:47 2012 -0700 - - rgw: don't add port to url if already has one - - Fixes: #3296 - Specifically, is host name string already has ':', then - don't try to append theport (swift auth). - - backport: argonaut - Signed-off-by: Yehuda Sadeh - -commit d76b71caa99a39035ea6ed9db6ca0994975d38af -Author: Sage Weil -Date: Mon Oct 15 16:37:05 2012 -0700 - - admin_socket: fix '0' protocol version - - Broken by 895e24d198ced83ab7fed3725f12f75e3bc97b0b. - - Signed-off-by: Sage Weil - -commit 714254cb0522b194118eb854f90d4c3971e8c6b3 -Author: Sage Weil -Date: Mon Oct 8 17:14:22 2012 -0700 - - mon: drop command replies on paxos reset - - If paxos resets, do not send the reply for the commit we were waiting for; - let the command be reprocessed and re-proposed. - - Among other things, this could lead to nondeterministic results for - 'ceph osd create '. - - Signed-off-by: Sage Weil - -commit d9e981f4209da9a0e000d434e28686a133b25f11 -Merge: 5d84b4a 13b448b -Author: Sage Weil -Date: Mon Oct 8 21:02:51 2012 -0700 - - Merge remote-tracking branch 'gh/for-stable-fstypes-and-ext-journal' into stable - -commit 5d84b4a22b2ff975679711719f336a312a6edff3 -Author: Tommi Virtanen -Date: Thu Aug 2 13:02:04 2012 -0700 - - ceph-authtool: Fix usage, it's --print-key not --print. - - Signed-off-by: Tommi Virtanen - -commit 13b448b8ce959f31d07cd1827614c445c410aa62 -Author: Tommi Virtanen -Date: Fri Oct 5 09:22:34 2012 -0700 - - upstart: OSD journal can be a symlink; if it's dangling, don't start. - - This lets a $osd_data/journal symlink point to - /dev/disk/by-partuuid/UUID and the osd will not attempt to start until - that disk is available. - - Signed-off-by: Tommi Virtanen - -commit d9dfa2d17859ca07d735b8e35c5dc00a25995153 -Author: Sage Weil -Date: Fri Oct 5 09:10:31 2012 -0700 - - osd: Make --get-journal-fsid not really start the osd. - - This way, it won't need -i ID and it won't access the osd_data_dir. - That makes it useful for locating the right osd to use with an - external journal partition. - - Signed-off-by: Tommi Virtanen - -commit f65daf3f24830a28e85ebe7c6fce2642f5fc6dd8 -Author: Tommi Virtanen -Date: Fri Oct 5 09:08:56 2012 -0700 - - osd: Make --get-journal-fsid not attempt aio or direct_io. - - Signed-off-by: Tommi Virtanen - -commit 86546d7dec6cd5080162d1f3d7de2c579736dd65 -Author: Tommi Virtanen -Date: Thu Oct 4 16:03:40 2012 -0700 - - ceph-disk-prepare: Use the OSD uuid as the partition GUID. - - This will make locating the right data partition for a given journal - partition a lot easier. - - Signed-off-by: Tommi Virtanen - -commit fa3aa41ead0be5a27695e3c208c5af00af90bc53 -Author: Tommi Virtanen -Date: Wed Oct 3 12:38:38 2012 -0700 - - debian/control, ceph-disk-prepare: Depend on xfsprogs, use xfs by default. - - Ext4 as a default is a bad choice, as we don't perform enough QA with - it. To use XFS as the default for ceph-disk-prepare, we need to depend - on xfsprogs. - - btrfs-tools is already recommended, so no change there. If you set - osd_fs_type=btrfs, and don't have the package installed, you'll just - get an error message. - - Signed-off-by: Tommi Virtanen - -commit 4c3997dc8bbd3985a7b86d8c54b71fbe15af1591 -Author: Tommi Virtanen -Date: Wed Oct 3 10:13:17 2012 -0700 - - ceph-disk-{prepare,activate}: Default mkfs arguments and mount options. - - The values for the settings were copied from teuthology task "ceph". - - Signed-off-by: Tommi Virtanen - -commit a6229b901785ef0a88d1b1886b5b5ae339ac7fcb -Author: Tommi Virtanen -Date: Wed Oct 3 08:47:20 2012 -0700 - - ceph-disk-prepare: Avoid triggering activate before prepare is done. - - Earlier testing never saw this, but now a mount of a disk triggers a - udev blockdev-added event, causing ceph-disk-activate to run even - before ceph-disk-prepare has had a chance to write the files and - unmount the disk. - - Avoid this by using a temporary partition type uuid ("ceph 2 be"), and - only setting it to the permanent ("ceph osd"). The hotplug event won't - match the type uuid, and thus won't trigger ceph-disk-activate. - - Signed-off-by: Tommi Virtanen - -commit 03cec77e2b0b4536349880de6890ad9537da0783 -Author: Tommi Virtanen -Date: Tue Oct 2 17:06:11 2012 -0700 - - ceph-disk-activate: Add a comment about user_xattr being default now. - - Signed-off-by: Tommi Virtanen - -commit 4aa13c6d228b9256870e02a57496f00a75e17349 -Author: Tommi Virtanen -Date: Tue Oct 2 16:53:35 2012 -0700 - - ceph-disk-activate: Use mount options from ceph.conf - - Always uses default cluster name ("ceph") for now, see - http://tracker.newdream.net/issues/3253 - - Closes: #2548 - Signed-off-by: Tommi Virtanen - -commit b684ab1d1727b23f75f232123f1da947df2e5e63 -Author: Tommi Virtanen -Date: Tue Oct 2 16:43:08 2012 -0700 - - ceph-disk-activate: Refactor to extract detect_fstype call. - - This allows us to use the fstype for a config lookup. - - Signed-off-by: Tommi Virtanen - -commit ce5e1f8dfaa8675b0a1e9fa22ebf91be9652aa01 -Author: Tommi Virtanen -Date: Tue Oct 2 16:37:07 2012 -0700 - - ceph-disk-activate: Unmount on errors (if it did the mount). - - This cleans up the error handling to not leave disks mounted - in /var/lib/ceph/tmp/mnt.* when something fails, e.g. when - the ceph command line tool can't talk to mons. - - Signed-off-by: Tommi Virtanen - -commit da86e4e43676ceaf0b39635954489c297de88025 -Author: Tommi Virtanen -Date: Tue Oct 2 16:23:55 2012 -0700 - - ceph-disk-prepare: Allow setting mkfs arguments and mount options in ceph.conf - - Tested with meaningless but easy-to-verify values: - - [global] - osd_fs_type = xfs - osd_fs_mkfs_arguments_xfs = -i size=512 - osd_fs_mount_options_xfs = noikeep - - ceph-disk-activate does not respect the mount options yet. - - Closes: #2549 - Signed-off-by: Tommi Virtanen - -commit cf2e3b15cea99cc100169e7a67103676d8990aee -Author: Tommi Virtanen -Date: Tue Oct 2 16:04:15 2012 -0700 - - ceph-disk-prepare: Allow specifying fs type to use. - - Either use ceph.conf variable osd_fs_type or command line option - --fs-type= - - Default is still ext4, as currently nothing guarantees xfsprogs - or btrfs-tools are installed. - - Currently both btrfs and xfs seems to trigger a disk hotplug event at - mount time, thus triggering a useless and unwanted ceph-disk-activate - run. This will be worked around in a later commit. - - Currently mkfs and mount options cannot be configured. - - Bug: #2549 - Signed-off-by: Tommi Virtanen - -commit f031046c4d600ce0a0c2c9ad5856dc100b0901fb -Author: Yehuda Sadeh -Date: Wed Sep 26 15:43:56 2012 -0700 - - rgw: copy_object should not override ETAG implicitly - - When copying an object with new attrs, we still need to - maintain the ETAG. - - Signed-off-by: Yehuda Sadeh - -commit 2fddfb0a95288d39cee2e82376297ce43296743b -Author: Yehuda Sadeh -Date: Mon Sep 24 18:10:24 2012 -0700 - - rgw: url_decode should allocate extra byte for dest - - Was missing extra byte for null termination - - Signed-off-by: Yehuda Sadeh