X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=src%2Fceph%2Fdoc%2Fcephfs%2Fdisaster-recovery.rst;fp=src%2Fceph%2Fdoc%2Fcephfs%2Fdisaster-recovery.rst;h=f47bd79e1da96012f397d8fe936b059cd2108730;hb=812ff6ca9fcd3e629e49d4328905f33eee8ca3f5;hp=0000000000000000000000000000000000000000;hpb=15280273faafb77777eab341909a3f495cf248d9;p=stor4nfv.git diff --git a/src/ceph/doc/cephfs/disaster-recovery.rst b/src/ceph/doc/cephfs/disaster-recovery.rst new file mode 100644 index 0000000..f47bd79 --- /dev/null +++ b/src/ceph/doc/cephfs/disaster-recovery.rst @@ -0,0 +1,280 @@ + +Disaster recovery +================= + +.. danger:: + + The notes in this section are aimed at experts, making a best effort + to recovery what they can from damaged filesystems. These steps + have the potential to make things worse as well as better. If you + are unsure, do not proceed. + + +Journal export +-------------- + +Before attempting dangerous operations, make a copy of the journal like so: + +:: + + cephfs-journal-tool journal export backup.bin + +Note that this command may not always work if the journal is badly corrupted, +in which case a RADOS-level copy should be made (http://tracker.ceph.com/issues/9902). + + +Dentry recovery from journal +---------------------------- + +If a journal is damaged or for any reason an MDS is incapable of replaying it, +attempt to recover what file metadata we can like so: + +:: + + cephfs-journal-tool event recover_dentries summary + +This command by default acts on MDS rank 0, pass --rank= to operate on other ranks. + +This command will write any inodes/dentries recoverable from the journal +into the backing store, if these inodes/dentries are higher-versioned +than the previous contents of the backing store. If any regions of the journal +are missing/damaged, they will be skipped. + +Note that in addition to writing out dentries and inodes, this command will update +the InoTables of each 'in' MDS rank, to indicate that any written inodes' numbers +are now in use. In simple cases, this will result in an entirely valid backing +store state. + +.. warning:: + + The resulting state of the backing store is not guaranteed to be self-consistent, + and an online MDS scrub will be required afterwards. The journal contents + will not be modified by this command, you should truncate the journal + separately after recovering what you can. + +Journal truncation +------------------ + +If the journal is corrupt or MDSs cannot replay it for any reason, you can +truncate it like so: + +:: + + cephfs-journal-tool journal reset + +.. warning:: + + Resetting the journal *will* lose metadata unless you have extracted + it by other means such as ``recover_dentries``. It is likely to leave + some orphaned objects in the data pool. It may result in re-allocation + of already-written inodes, such that permissions rules could be violated. + +MDS table wipes +--------------- + +After the journal has been reset, it may no longer be consistent with respect +to the contents of the MDS tables (InoTable, SessionMap, SnapServer). + +To reset the SessionMap (erase all sessions), use: + +:: + + cephfs-table-tool all reset session + +This command acts on the tables of all 'in' MDS ranks. Replace 'all' with an MDS +rank to operate on that rank only. + +The session table is the table most likely to need resetting, but if you know you +also need to reset the other tables then replace 'session' with 'snap' or 'inode'. + +MDS map reset +------------- + +Once the in-RADOS state of the filesystem (i.e. contents of the metadata pool) +is somewhat recovered, it may be necessary to update the MDS map to reflect +the contents of the metadata pool. Use the following command to reset the MDS +map to a single MDS: + +:: + + ceph fs reset --yes-i-really-mean-it + +Once this is run, any in-RADOS state for MDS ranks other than 0 will be ignored: +as a result it is possible for this to result in data loss. + +One might wonder what the difference is between 'fs reset' and 'fs remove; fs new'. The +key distinction is that doing a remove/new will leave rank 0 in 'creating' state, such +that it would overwrite any existing root inode on disk and orphan any existing files. In +contrast, the 'reset' command will leave rank 0 in 'active' state such that the next MDS +daemon to claim the rank will go ahead and use the existing in-RADOS metadata. + +Recovery from missing metadata objects +-------------------------------------- + +Depending on what objects are missing or corrupt, you may need to +run various commands to regenerate default versions of the +objects. + +:: + + # Session table + cephfs-table-tool 0 reset session + # SnapServer + cephfs-table-tool 0 reset snap + # InoTable + cephfs-table-tool 0 reset inode + # Journal + cephfs-journal-tool --rank=0 journal reset + # Root inodes ("/" and MDS directory) + cephfs-data-scan init + +Finally, you can regenerate metadata objects for missing files +and directories based on the contents of a data pool. This is +a three-phase process. First, scanning *all* objects to calculate +size and mtime metadata for inodes. Second, scanning the first +object from every file to collect this metadata and inject it into +the metadata pool. Third, checking inode linkages and fixing found +errors. + +:: + + cephfs-data-scan scan_extents + cephfs-data-scan scan_inodes + cephfs-data-scan scan_links + +'scan_extents' and 'scan_inodes' commands may take a *very long* time +if there are many files or very large files in the data pool. + +To accelerate the process, run multiple instances of the tool. + +Decide on a number of workers, and pass each worker a number within +the range 0-(worker_m - 1). + +The example below shows how to run 4 workers simultaneously: + +:: + + # Worker 0 + cephfs-data-scan scan_extents --worker_n 0 --worker_m 4 + # Worker 1 + cephfs-data-scan scan_extents --worker_n 1 --worker_m 4 + # Worker 2 + cephfs-data-scan scan_extents --worker_n 2 --worker_m 4 + # Worker 3 + cephfs-data-scan scan_extents --worker_n 3 --worker_m 4 + + # Worker 0 + cephfs-data-scan scan_inodes --worker_n 0 --worker_m 4 + # Worker 1 + cephfs-data-scan scan_inodes --worker_n 1 --worker_m 4 + # Worker 2 + cephfs-data-scan scan_inodes --worker_n 2 --worker_m 4 + # Worker 3 + cephfs-data-scan scan_inodes --worker_n 3 --worker_m 4 + +It is **important** to ensure that all workers have completed the +scan_extents phase before any workers enter the scan_inodes phase. + +After completing the metadata recovery, you may want to run cleanup +operation to delete ancillary data geneated during recovery. + +:: + + cephfs-data-scan cleanup + +Finding files affected by lost data PGs +--------------------------------------- + +Losing a data PG may affect many files. Files are split into many objects, +so identifying which files are affected by loss of particular PGs requires +a full scan over all object IDs that may exist within the size of a file. +This type of scan may be useful for identifying which files require +restoring from a backup. + +.. danger:: + + This command does not repair any metadata, so when restoring files in + this case you must *remove* the damaged file, and replace it in order + to have a fresh inode. Do not overwrite damaged files in place. + +If you know that objects have been lost from PGs, use the ``pg_files`` +subcommand to scan for files that may have been damaged as a result: + +:: + + cephfs-data-scan pg_files [...] + +For example, if you have lost data from PGs 1.4 and 4.5, and you would like +to know which files under /home/bob might have been damaged: + +:: + + cephfs-data-scan pg_files /home/bob 1.4 4.5 + +The output will be a list of paths to potentially damaged files, one +per line. + +Note that this command acts as a normal CephFS client to find all the +files in the filesystem and read their layouts, so the MDS must be +up and running. + +Using an alternate metadata pool for recovery +--------------------------------------------- + +.. warning:: + + There has not been extensive testing of this procedure. It should be + undertaken with great care. + +If an existing filesystem is damaged and inoperative, it is possible to create +a fresh metadata pool and attempt to reconstruct the filesystem metadata +into this new pool, leaving the old metadata in place. This could be used to +make a safer attempt at recovery since the existing metadata pool would not be +overwritten. + +.. caution:: + + During this process, multiple metadata pools will contain data referring to + the same data pool. Extreme caution must be exercised to avoid changing the + data pool contents while this is the case. Once recovery is complete, the + damaged metadata pool should be deleted. + +To begin this process, first create the fresh metadata pool and initialize +it with empty file system data structures: + +:: + + ceph fs flag set enable_multiple true --yes-i-really-mean-it + ceph osd pool create recovery replicated + ceph fs new recovery-fs recovery --allow-dangerous-metadata-overlay + cephfs-data-scan init --force-init --filesystem recovery-fs --alternate-pool recovery + ceph fs reset recovery-fs --yes-i-really-mean-it + cephfs-table-tool recovery-fs:all reset session + cephfs-table-tool recovery-fs:all reset snap + cephfs-table-tool recovery-fs:all reset inode + +Next, run the recovery toolset using the --alternate-pool argument to output +results to the alternate pool: + +:: + + cephfs-data-scan scan_extents --alternate-pool recovery --filesystem + cephfs-data-scan scan_inodes --alternate-pool recovery --filesystem --force-corrupt --force-init + cephfs-data-scan scan_links --filesystem recovery-fs + +If the damaged filesystem contains dirty journal data, it may be recovered next +with: + +:: + + cephfs-journal-tool --rank=:0 event recover_dentries list --alternate-pool recovery + cephfs-journal-tool --rank recovery-fs:0 journal reset --force + +After recovery, some recovered directories will have incorrect statistics. +Ensure the parameters mds_verify_scatter and mds_debug_scatterstat are set +to false (the default) to prevent the MDS from checking the statistics, then +run a forward scrub to repair them. Ensure you have an MDS running and issue: + +:: + + ceph daemon mds.a scrub_path / recursive repair