X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Ftarget-ppc%2FSTATUS;fp=qemu%2Ftarget-ppc%2FSTATUS;h=a4d48a7ca27609fb3da4767f2cdfdb8d740a2481;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/target-ppc/STATUS b/qemu/target-ppc/STATUS
new file mode 100644
index 000000000..a4d48a7ca
--- /dev/null
+++ b/qemu/target-ppc/STATUS
@@ -0,0 +1,550 @@
+PowerPC emulation status.
+The goal of this file is to provide a reference status to avoid regressions.
+
+===============================================================================
+PowerPC core emulation status
+
+INSN: instruction set.
+      OK => all instructions are emulated
+      KO => some insns are missing or some should be removed
+      ?  => unchecked
+SPR:  special purpose registers set
+      OK => all SPR registered (but some may be fake)
+      KO => some SPR are missing or should be removed
+      ?  => unchecked
+MSR:  MSR bits definitions
+      OK => all MSR bits properly defined
+      KO => MSR definition is incorrect
+      ?  => unchecked
+IRQ:  input signals definitions (mostly interrupts)
+      OK => input signals are properly defined
+      KO => input signals are not implemented (system emulation does not work)
+      ?  => input signals definitions may be incorrect
+MMU:  MMU model implementation
+      OK => MMU model is implemented and Linux is able to boot
+      KO => MMU model not implemented or bugged
+      ?  => MMU model not tested
+EXCP: exceptions model implementation
+      OK => exception model is implemented and Linux is able to boot
+      KO => exception model not implemented or known to be buggy
+      ?  => exception model may be incorrect or is untested
+
+Embedded PowerPC cores
+***
+PowerPC 401:
+INSN  OK
+SPR   OK 401A1
+MSR   OK
+IRQ   KO partially implemented
+MMU   OK
+EXCP  ?
+
+PowerPC 401x2:
+INSN  OK
+SPR   OK 401B2 401C2 401D2 401E2 401F2
+MSR   OK
+IRQ   KO partially implemented
+MMU   OK
+EXCP  ?
+
+PowerPC IOP480:
+INSN  OK
+SPR   OK IOP480
+MSR   OK
+IRQ   KO partially implemented
+MMU   OK
+EXCP  ?
+
+To be checked: 401G2 401B3 Cobra
+
+***
+PowerPC 403:
+INSN  OK
+SPR   OK 403GA 403GB
+MMU   OK
+MSR   OK
+IRQ   KO not implemented
+EXCP  ?
+
+PowerPC 403GCX:
+INSN  OK
+SPR   OK 403GCX
+MMU   OK
+MSR   OK
+IRQ   KO not implemented
+EXCP  ?
+
+To be checked: 403GC
+
+***
+PowerPC 405:
+Checked: 405CRa 405CRb 405CRc 405EP 405GPa 405GPb 405GPc 405GPd 405GPe 405GPR
+         Npe405H Npe405H2 Npe405L
+INSN  OK
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   OK
+EXCP  OK
+Remarks: Linux 2.4 boots (at least 1 proprietary firmware).
+         uboot seems to freeze at boot time.
+To be checked: 405D2 405D4 405EZ 405LP Npe4GS3 STB03 STB04 STB25
+               x2vp4 x2vp7 x2vp20 x2vp50
+
+XXX: find what is IBM e407b4
+
+***
+PowerPC 440:
+Checked: 440EPa 440EPb 440GXa 440GXb 440GXc 440GXf 440SP 440SP2
+INSN  OK
+SPR   OK
+MSR   OK
+IRQ   KO not implemented
+MMU   ?
+EXCP  ?
+
+PowerPC 440GP:
+Checked: 440GPb 440GPc
+INSN  OK
+SPR   OK
+MSR   OK
+IRQ   KO not implemented
+MMU   ?
+EXCP  ?
+
+PowerPC 440x4:
+Checked: 440A4 440B4 440G4 440H4
+INSN  OK
+SPR   OK
+MSR   OK
+IRQ   KO not implemented
+MMU   ?
+EXCP  ?
+
+PowerPC 440x5:
+Checked: 440A5 440F5 440G5 440H6 440GRa
+INSN  OK
+SPR   OK
+MSR   OK
+IRQ   KO not implemented
+MMU   ?
+EXCP  ?
+
+To be checked: 440EPx 440GRx 440SPE
+
+***
+PowerPC 460: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+PowerPC 460F: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+***
+PowerPC e200: (not implemented)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+***
+PowerPC e300: (not implemented)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+***
+PowerPC e500: (not implemented)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+***
+PowerPC e600: (not implemented)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+***
+32 bits PowerPC
+PowerPC 601: (601 601v2)
+INSN  OK
+SPR   OK is HID15 only on 601v2 ?
+MSR   OK
+IRQ   KO not implemented
+MMU   ?
+EXCP  ?
+Remarks: some instructions should have a specific behavior (not implemented)
+
+PowerPC 602: 602
+INSN  OK
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   ?
+EXCP  ? at least timer and external interrupt are OK
+Remarks: Linux 2.4 crashes when entering user-mode.
+         Linux 2.6.22 boots on this CPU but does not recognize it.
+
+PowerPC 603: (603)
+INSN  OK
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   OK
+EXCP  OK
+Remarks: Linux 2.4 boots and properly recognizes the CPU
+         Linux 2.6.22 idem.
+
+PowerPC 603e: (603e11)
+INSN  OK
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   OK
+EXCP  OK
+Remarks: Linux 2.4 boots and properly recognizes the CPU
+         Linux 2.6.22 idem.
+
+PowerPC G2:
+INSN  OK
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   OK
+EXCP  OK
+Remarks: Linux 2.4 boots, recognizes the CPU as a 82xx.
+         Linux 2.6.22 idem.
+
+PowerPC G2le:
+INSN  OK
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   OK
+EXCP  OK
+Remarks: Linux 2.4 does not boots. Same symptoms as 602.
+         Linux 2.6.22 boots and properly recognizes the CPU.
+
+PowerPC 604:
+INSN  OK
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   OK
+EXCP  OK
+Remarks: Linux 2.4 boots and properly recognizes the CPU.
+         Linux 2.6.22 idem.
+
+PowerPC 7x0:
+INSN  OK
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   OK
+EXCP  OK
+Remarks: Linux 2.4 boots and properly recognizes the CPU.
+         Linux 2.6.22 idem.
+
+PowerPC 750fx:
+INSN  OK
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   OK
+EXCP  OK
+Remarks: Linux 2.4 boots but does not properly recognizes the CPU.
+         Linux 2.6.22 boots and properly recognizes the CPU.
+
+PowerPC 7x5:
+INSN  ?
+SPR   ?
+MSR   ?
+IRQ   OK
+MMU   ?
+EXCP  OK
+Remarks: Linux 2.4 does not boot.
+         Linux 2.6.22 idem.
+
+PowerPC 7400:
+INSN  KO Altivec missing
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   OK
+EXCP  ?  Altivec, ...
+Remarks: Linux 2.4 boots and properly recognize the CPU.
+         Linux 2.6.22 idem.
+
+PowerPC 7410:
+INSN  KO Altivec missing
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   OK
+EXCP  ?  Altivec, ...
+Remarks: Linux 2.4 boots and properly recognize the CPU.
+         Linux 2.6.22 idem.
+   Note that UM says tlbld & tlbli are implemented but this may be a mistake
+   as TLB loads are managed by the hardware and the CPU does not implement the
+   needed registers.
+
+PowerPC 7441:
+INSN  KO Altivec missing
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   OK
+EXCP  ?  Altivec, ...
+Remarks: Linux does not have the code to handle TLB miss on this CPU
+         Linux 2.6.22 idem.
+
+PowerPC 7450/7451:
+INSN  KO Altivec missing
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   OK
+EXCP  ?  Altivec, ...
+Remarks: Linux does not have the code to handle TLB miss on this CPU
+         Linux 2.6.22 idem.
+
+PowerPC 7445/7447:
+INSN  KO Altivec missing
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   OK
+EXCP  ?  Altivec, ...
+Remarks: Linux does not have the code to handle TLB miss on this CPU
+         Linux 2.6.22 idem.
+
+PowerPC 7455/7457:
+INSN  KO Altivec missing
+SPR   OK
+MSR   OK
+IRQ   OK
+MMU   OK
+EXCP  ?  Altivec, ...
+Remarks: Linux does not have the code to handle TLB miss on this CPU
+         Linux 2.6.22 idem.
+
+64 bits PowerPC
+PowerPC 620: (disabled)
+INSN  KO
+SPR   KO
+MSR   ?
+IRQ   KO
+MMU   KO
+EXCP  KO
+Remarks: not much documentation for this implementation...
+
+PowerPC 970:
+INSN  KO Altivec missing and more
+SPR   KO
+MSR   ?
+IRQ   OK
+MMU   OK
+EXCP  KO partially implemented
+Remarks: Should be able to boot but there is no hw platform currently emulated.
+
+PowerPC 970FX:
+INSN  KO Altivec missing and more
+SPR   KO
+MSR   ?
+IRQ   OK
+MMU   OK
+EXCP  KO partially implemented
+Remarks: Should be able to boot but there is no hw platform currently emulated.
+
+PowerPC Cell:
+INSN  KO Altivec missing and more
+SPR   KO
+MSR   ?
+IRQ   ?
+MMU   ?
+EXCP  ? partially implemented
+Remarks: As the core is mostly a 970, should be able to boot.
+         SPE are not implemented.
+
+PowerPC 630: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+PowerPC 631: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+POWER4: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+POWER4+: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+POWER5: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+POWER5+: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+POWER6: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+RS64: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+RS64-II: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+RS64-III: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+RS64-IV: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+Original POWER
+POWER: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+POWER2: (disabled: lack of detailed specifications)
+INSN  KO
+SPR   KO
+MSR   KO
+IRQ   KO
+MMU   KO
+EXCP  KO
+
+===============================================================================
+PowerPC microcontrollers emulation status
+
+Implemementation should be sufficient to boot Linux:
+(there seem to be problems with uboot freezing at some point)
+- PowerPC 405CR
+- PowerPC 405EP
+
+TODO:
+- PowerPC 401 microcontrollers emulation
+- PowerPC 403 microcontrollers emulation
+- more PowerPC 405 microcontrollers emulation
+- Fixes / more features for implemented PowerPC 405 microcontrollers emulation
+- PowerPC 440 microcontrollers emulation
+- e200 microcontrollers emulation
+- e300 microcontrollers emulation
+- e500 microcontrollers emulation
+- e600 microcontrollers emulation
+
+===============================================================================
+PowerPC based platforms emulation status
+
+* PREP platform (RS/6000 7043...) - TO BE CHECKED (broken)
+- Gentoo Linux live CDROM 1.4
+- Debian Linux 3.0
+- Mandrake Linux 9
+
+* heathrow PowerMac platform (beige PowerMac) - TO BE CHECKED (broken)
+- Gentoo Linux live CDROM 1.4
+- Debian Linux 3.0
+- Mandrake Linux 9
+
+* mac99 platform (white and blue PowerMac, ...)
+- Gentoo Linux live CDROM 1.4 - boots, compiles linux kernel
+- Debian Linux woody - boots from CDROM and HDD
+- Mandrake Linux 9 - boots from CDROM, freezes during install
+- Knoppix 2003-07-13_4 boots from CDROM, pb with X configuration
+  distribution bug: X runs with a properly hand-coded configuration.
+- rock Linux 2.0 runs from CDROM
+
+* Linux 2.6 support seems deadly broken (used to boot...).
+
+* PowerPC 405EP reference boards:
+- can boot Linux 2.4 & 2.6.
+  Need to provide a flash image ready to boot for reproductible tests.
+
+TODO:
+- URGENT: fix PreP and heathrow platforms
+- PowerPC 64 reference platform
+- MCA based RS/6000 emulation
+- CHRP emulation (not PowerMac)
+- PPAR emulation
+- ePPAR emulation
+- misc PowerPC reference boards emulation
+
+===============================================================================