X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Fpost%2Fboard%2Flwmon5%2Fsysmon.c;fp=qemu%2Froms%2Fu-boot%2Fpost%2Fboard%2Flwmon5%2Fsysmon.c;h=cca1a26235462cb96b6c3bc9cfb5bcaabcf91f1a;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/roms/u-boot/post/board/lwmon5/sysmon.c b/qemu/roms/u-boot/post/board/lwmon5/sysmon.c new file mode 100644 index 000000000..cca1a2623 --- /dev/null +++ b/qemu/roms/u-boot/post/board/lwmon5/sysmon.c @@ -0,0 +1,277 @@ +/* + * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com + * + * Developed for DENX Software Engineering GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include + +/* + * SYSMON test + * + * This test performs the system hardware monitoring. + * The test passes when all the following voltages and temperatures + * are within allowed ranges: + * + * Temperature -40 .. +90 C + * +5V +4.50 .. +5.50 V + * +5V standby +3.50 .. +5.50 V + * + * LCD backlight is not enabled if temperature values are not within + * allowed ranges (-30 .. + 80). The brightness of backlite can be + * controlled by setting "brightness" environment variable. Default value is 50% + * + * See the list of all parameters in the sysmon_table below + */ + +#include +#include +#include + +#if defined(CONFIG_VIDEO) +#include +#endif + +#if CONFIG_POST & CONFIG_SYS_POST_SYSMON + +DECLARE_GLOBAL_DATA_PTR; + +/* from dspic.c */ +extern int dspic_read(ushort reg, ushort *data); + +#define REG_TEMPERATURE 0x12BC +#define REG_VOLTAGE_5V 0x12CA +#define REG_VOLTAGE_5V_STANDBY 0x12C6 + +#define TEMPERATURE_MIN (-40) /* degr. C */ +#define TEMPERATURE_MAX (+90) /* degr. C */ +#define TEMPERATURE_DISPLAY_MIN (-35) /* degr. C */ +#define TEMPERATURE_DISPLAY_MAX (+85) /* degr. C */ + +#define VOLTAGE_5V_MIN (+4500) /* mV */ +#define VOLTAGE_5V_MAX (+5500) /* mV */ + +#define VOLTAGE_5V_STANDBY_MIN (+3500) /* mV */ +#define VOLTAGE_5V_STANDBY_MAX (+5500) /* mV */ + +typedef struct sysmon_s sysmon_t; +typedef struct sysmon_table_s sysmon_table_t; + +static void sysmon_dspic_init(sysmon_t *this); +static int sysmon_dspic_read(sysmon_t *this, uint addr, int *val); +static int sysmon_dspic_read_sgn(sysmon_t *this, uint addr, int *val); +static void sysmon_backlight_disable(sysmon_table_t *this); + +struct sysmon_s { + uchar chip; + void (*init)(sysmon_t *); + int (*read)(sysmon_t *, uint, int *); +}; + +static sysmon_t sysmon_dspic = { + CONFIG_SYS_I2C_DSPIC_IO_ADDR, + sysmon_dspic_init, + sysmon_dspic_read +}; + +static sysmon_t sysmon_dspic_sgn = { + CONFIG_SYS_I2C_DSPIC_IO_ADDR, + sysmon_dspic_init, + sysmon_dspic_read_sgn +}; + +static sysmon_t *sysmon_list[] = { + &sysmon_dspic, + NULL +}; + +struct sysmon_table_s { + char *name; + char *unit_name; + sysmon_t *sysmon; + void (*exec_before)(sysmon_table_t *); + void (*exec_after)(sysmon_table_t *); + + int unit_precision; + int unit_div; + int unit_min; + int unit_max; + uint val_mask; + uint val_min; + uint val_max; + int val_valid; + uint val_min_alt; + uint val_max_alt; + int val_valid_alt; + uint addr; +}; + +static sysmon_table_t sysmon_table[] = { + { + "Temperature", " C", &sysmon_dspic, NULL, sysmon_backlight_disable, + 1, 1, -32768, 32767, 0xFFFF, + 0x8000 + TEMPERATURE_MIN, 0x8000 + TEMPERATURE_MAX, 0, + 0x8000 + TEMPERATURE_DISPLAY_MIN, 0x8000 + TEMPERATURE_DISPLAY_MAX, 0, + REG_TEMPERATURE, + }, + + { + "+ 5 V", "V", &sysmon_dspic, NULL, NULL, + 100, 1000, -0x8000, 0x7FFF, 0xFFFF, + 0x8000 + VOLTAGE_5V_MIN, 0x8000 + VOLTAGE_5V_MAX, 0, + 0x8000 + VOLTAGE_5V_MIN, 0x8000 + VOLTAGE_5V_MAX, 0, + REG_VOLTAGE_5V, + }, + + { + "+ 5 V standby", "V", &sysmon_dspic, NULL, NULL, + 100, 1000, -0x8000, 0x7FFF, 0xFFFF, + 0x8000 + VOLTAGE_5V_STANDBY_MIN, 0x8000 + VOLTAGE_5V_STANDBY_MAX, 0, + 0x8000 + VOLTAGE_5V_STANDBY_MIN, 0x8000 + VOLTAGE_5V_STANDBY_MAX, 0, + REG_VOLTAGE_5V_STANDBY, + }, + + { + "Temperature", "°C", &sysmon_dspic_sgn, NULL, sysmon_backlight_disable, + 1, 1, -32768, 32767, 0xFFFF, + 0x8000 + TEMPERATURE_MIN, 0x8000 + TEMPERATURE_MAX, 0, + 0x8000 + TEMPERATURE_DISPLAY_MIN, 0x8000 + TEMPERATURE_DISPLAY_MAX, 0, + REG_TEMPERATURE, + }, +}; + +int sysmon_init_f(void) +{ + sysmon_t **l; + + for (l = sysmon_list; *l; l++) + (*l)->init(*l); + + return 0; +} + +void sysmon_reloc(void) +{ + /* Do nothing for now, sysmon_reloc() is required by the sysmon post */ +} + +static char *sysmon_unit_value(sysmon_table_t *s, uint val) +{ + static char buf[32]; + char *p, sign; + int decimal, frac; + int unit_val; + + unit_val = s->unit_min + (s->unit_max - s->unit_min) * val / s->val_mask; + + if (val == -1) + return "I/O ERROR"; + + if (unit_val < 0) { + sign = '-'; + unit_val = -unit_val; + } else { + sign = '+'; + } + + p = buf + sprintf(buf, "%c%2d", sign, unit_val / s->unit_div); + + frac = unit_val % s->unit_div; + frac /= (s->unit_div / s->unit_precision); + + decimal = s->unit_precision; + + if (decimal != 1) + *p++ = '.'; + for (decimal /= 10; decimal != 0; decimal /= 10) + *p++ = '0' + (frac / decimal) % 10; + strcpy(p, s->unit_name); + + return buf; +} + +static void sysmon_dspic_init(sysmon_t *this) +{ +} + +static int sysmon_dspic_read(sysmon_t *this, uint addr, int *val) +{ + ushort data; + + if (dspic_read(addr, &data) == 0){ + /* To fit into the table range we should add 0x8000 */ + *val = data + 0x8000; + return 0; + } + + return -1; +} + +static int sysmon_dspic_read_sgn(sysmon_t *this, uint addr, int *val) +{ + ushort data; + + if (dspic_read(addr, &data) == 0){ + /* To fit into the table range we should add 0x8000 */ + *val = (signed short)data + 0x8000; + return 0; + } + + return -1; +} + +static void sysmon_backlight_disable(sysmon_table_t *this) +{ +#if defined(CONFIG_VIDEO) + board_backlight_switch(this->val_valid_alt); +#endif +} + +int sysmon_post_test(int flags) +{ + int res = 0; + sysmon_table_t * t; + int val; + + for (t = sysmon_table; t < sysmon_table + ARRAY_SIZE(sysmon_table); t++) { + t->val_valid = 1; + if (t->exec_before) + t->exec_before(t); + + if (t->sysmon->read(t->sysmon, t->addr, &val) != 0) { + t->val_valid = 0; + t->val_valid_alt = 0; + post_log(": read failed\n"); + res = 1; + break; + } + + if (t->val_valid != 0) { + t->val_valid = val >= t->val_min && val <= t->val_max; + t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt; + } + + if (t->exec_after) + t->exec_after(t); + + if ((!t->val_valid) || (flags)) { + post_log("\n\t%-17s = %-10s ", t->name, sysmon_unit_value(t, val)); + post_log("allowed range"); + post_log(" %-8s ..", sysmon_unit_value(t, t->val_min)); + post_log(" %-8s", sysmon_unit_value(t, t->val_max)); + post_log(" %s", t->val_valid ? "OK" : "FAIL"); + } + + if (!t->val_valid) { + res = 1; + break; + } + } + post_log("\n"); + + return res; +} +#endif /* CONFIG_POST & CONFIG_SYS_POST_SYSMON */