X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Finclude%2Fconfigs%2Fzynq-common.h;fp=qemu%2Froms%2Fu-boot%2Finclude%2Fconfigs%2Fzynq-common.h;h=731e69b5fd89dcb2aa275f38f04d7e87dcfa1def;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/include/configs/zynq-common.h b/qemu/roms/u-boot/include/configs/zynq-common.h
new file mode 100644
index 000000000..731e69b5f
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/zynq-common.h
@@ -0,0 +1,309 @@
+/*
+ * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
+ * (C) Copyright 2013 Xilinx, Inc.
+ *
+ * Common configuration options for all Zynq boards.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_ZYNQ_COMMON_H
+#define __CONFIG_ZYNQ_COMMON_H
+
+/* High Level configuration Options */
+#define CONFIG_ARMV7
+#define CONFIG_ZYNQ
+
+/* CPU clock */
+#ifndef CONFIG_CPU_FREQ_HZ
+# define CONFIG_CPU_FREQ_HZ	800000000
+#endif
+
+/* Cache options */
+#define CONFIG_CMD_CACHE
+#define CONFIG_SYS_CACHELINE_SIZE	32
+
+#define CONFIG_SYS_L2CACHE_OFF
+#ifndef CONFIG_SYS_L2CACHE_OFF
+# define CONFIG_SYS_L2_PL310
+# define CONFIG_SYS_PL310_BASE		0xf8f02000
+#endif
+
+/* Serial drivers */
+#define CONFIG_BAUDRATE		115200
+/* The following table includes the supported baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+/* DCC driver */
+#if defined(CONFIG_ZYNQ_DCC)
+# define CONFIG_ARM_DCC
+# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
+#else
+# define CONFIG_ZYNQ_SERIAL
+#endif
+
+/* Ethernet driver */
+#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
+# define CONFIG_NET_MULTI
+# define CONFIG_ZYNQ_GEM
+# define CONFIG_MII
+# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+# define CONFIG_PHYLIB
+# define CONFIG_PHY_MARVELL
+#endif
+
+/* SPI */
+#ifdef CONFIG_ZYNQ_SPI
+# define CONFIG_SPI_FLASH
+# define CONFIG_SPI_FLASH_SST
+# define CONFIG_CMD_SF
+#endif
+
+/* NOR */
+#ifndef CONFIG_SYS_NO_FLASH
+# define CONFIG_SYS_FLASH_BASE		0xE2000000
+# define CONFIG_SYS_FLASH_SIZE		(16 * 1024 * 1024)
+# define CONFIG_SYS_MAX_FLASH_BANKS	1
+# define CONFIG_SYS_MAX_FLASH_SECT	512
+# define CONFIG_SYS_FLASH_ERASE_TOUT	1000
+# define CONFIG_SYS_FLASH_WRITE_TOUT	5000
+# define CONFIG_FLASH_SHOW_PROGRESS	10
+# define CONFIG_SYS_FLASH_CFI
+# undef CONFIG_SYS_FLASH_EMPTY_INFO
+# define CONFIG_FLASH_CFI_DRIVER
+# undef CONFIG_SYS_FLASH_PROTECTION
+# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#endif
+
+/* MMC */
+#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
+# define CONFIG_MMC
+# define CONFIG_GENERIC_MMC
+# define CONFIG_SDHCI
+# define CONFIG_ZYNQ_SDHCI
+# define CONFIG_CMD_MMC
+# define CONFIG_CMD_FAT
+# define CONFIG_SUPPORT_VFAT
+# define CONFIG_CMD_EXT2
+# define CONFIG_DOS_PARTITION
+#endif
+
+#define CONFIG_SYS_I2C_ZYNQ
+/* I2C */
+#if defined(CONFIG_SYS_I2C_ZYNQ)
+# define CONFIG_CMD_I2C
+# define CONFIG_SYS_I2C
+# define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
+# define CONFIG_SYS_I2C_ZYNQ_SLAVE		0
+#endif
+
+/* EEPROM */
+#ifdef CONFIG_ZYNQ_EEPROM
+# define CONFIG_CMD_EEPROM
+# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+# define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
+# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
+# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+# define CONFIG_SYS_EEPROM_SIZE			1024 /* Bytes */
+#endif
+
+#define CONFIG_BOOTP_SERVERIP
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_MAY_FAIL
+
+/* Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE			(128 << 10)
+
+/* Allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Environment */
+#ifndef CONFIG_ENV_IS_NOWHERE
+# ifndef CONFIG_SYS_NO_FLASH
+#  define CONFIG_ENV_IS_IN_FLASH
+# elif defined(CONFIG_SYS_NO_FLASH)
+#  define CONFIG_ENV_IS_NOWHERE
+# endif
+
+# define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
+# define CONFIG_ENV_OFFSET		0xE0000
+# define CONFIG_CMD_SAVEENV
+#endif
+
+/* Default environment */
+#define CONFIG_EXTRA_ENV_SETTINGS	\
+	"fit_image=fit.itb\0"		\
+	"load_addr=0x2000000\0"		\
+	"fit_size=0x800000\0"		\
+	"flash_off=0x100000\0"		\
+	"nor_flash_off=0xE2100000\0"	\
+	"fdt_high=0x20000000\0"		\
+	"initrd_high=0x20000000\0"	\
+	"norboot=echo Copying FIT from NOR flash to RAM... && " \
+		"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
+		"bootm ${load_addr}\0" \
+	"sdboot=echo Copying FIT from SD to RAM... && " \
+		"fatload mmc 0 ${load_addr} ${fit_image} && " \
+		"bootm ${load_addr}\0" \
+	"jtagboot=echo TFTPing FIT to RAM... && " \
+		"tftpboot ${load_addr} ${fit_image} && " \
+		"bootm ${load_addr}\0"
+#define CONFIG_BOOTCOMMAND		"run $modeboot"
+#define CONFIG_BOOTDELAY		3 /* -1 to Disable autoboot */
+#define CONFIG_SYS_LOAD_ADDR		0 /* default? */
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_PROMPT		"zynq-uboot> "
+#define CONFIG_SYS_HUSH_PARSER
+
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CLOCKS
+#define CONFIG_CMD_CLK
+#define CONFIG_SYS_MAXARGS		15 /* max number of command args */
+#define CONFIG_SYS_CBSIZE		256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/* Physical Memory map */
+#define CONFIG_SYS_TEXT_BASE		0x4000000
+
+#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_SYS_SDRAM_BASE		0
+
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x1000)
+
+#define CONFIG_SYS_MALLOC_LEN		0x400000
+#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_MALLOC_LEN
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+					CONFIG_SYS_INIT_RAM_SIZE - \
+					GENERATED_GBL_DATA_SIZE)
+
+/* Enable the PL to be downloaded */
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_ZYNQPL
+#define CONFIG_CMD_FPGA
+
+/* Open Firmware flat tree */
+#define CONFIG_OF_LIBFDT
+
+/* FIT support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
+
+/* FDT support */
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+/* RSA support */
+#define CONFIG_FIT_SIGNATURE
+#define CONFIG_RSA
+
+/* Extend size of kernel image for uncompression */
+#define CONFIG_SYS_BOOTM_LEN	(20 * 1024 * 1024)
+
+/* Boot FreeBSD/vxWorks from an ELF image */
+#if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
+# define CONFIG_API
+# define CONFIG_CMD_ELF
+# define CONFIG_SYS_MMC_MAX_DEVICE	1
+#endif
+
+#define CONFIG_SYS_LDSCRIPT  "arch/arm/cpu/armv7/zynq/u-boot.lds"
+
+/* Commands */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_TFTPPUT
+
+/* SPL part */
+#define CONFIG_SPL
+#define CONFIG_CMD_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+
+#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/armv7/zynq/u-boot-spl.lds"
+
+/* Disable dcache for SPL just for sure */
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_DCACHE_OFF
+#undef CONFIG_FPGA
+#undef CONFIG_OF_CONTROL
+#endif
+
+/* MMC support */
+#ifdef CONFIG_ZYNQ_SDHCI0
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION    1
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME     "u-boot.img"
+#endif
+
+/* Address in RAM where the parameters must be copied by SPL. */
+#define CONFIG_SYS_SPL_ARGS_ADDR	0x10000000
+
+#define CONFIG_SPL_FAT_LOAD_ARGS_NAME		"system.dtb"
+#define CONFIG_SPL_FAT_LOAD_KERNEL_NAME		"uImage"
+
+/* Not using MMC raw mode - just for compilation purpose */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	0
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0
+
+/* qspi mode is working fine */
+#ifdef CONFIG_ZYNQ_QSPI
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_BUS	0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x100000
+#define CONFIG_SPL_SPI_CS	0
+#endif
+
+/* for booting directly linux */
+#define CONFIG_SPL_OS_BOOT
+
+/* SP location before relocation, must use scratch RAM */
+#define CONFIG_SPL_TEXT_BASE	0x0
+
+/* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
+#define CONFIG_SPL_MAX_SIZE	0x30000
+
+/* The highest 64k OCM address */
+#define OCM_HIGH_ADDR	0xffff0000
+
+/* Just define any reasonable size */
+#define CONFIG_SPL_STACK_SIZE	0x1000
+
+/* SPL stack position - and stack goes down */
+#define CONFIG_SPL_STACK	(OCM_HIGH_ADDR + CONFIG_SPL_STACK_SIZE)
+
+/* On the top of OCM space */
+#define CONFIG_SYS_SPL_MALLOC_START	(CONFIG_SPL_STACK + \
+					 GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x1000
+
+/* BSS setup */
+#define CONFIG_SPL_BSS_START_ADDR	0x100000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x100000
+
+#define CONFIG_SYS_UBOOT_START	CONFIG_SYS_TEXT_BASE
+
+#endif /* __CONFIG_ZYNQ_COMMON_H */