X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Finclude%2Fconfigs%2Fti_omap5_common.h;fp=qemu%2Froms%2Fu-boot%2Finclude%2Fconfigs%2Fti_omap5_common.h;h=a582fa4041274fa4c3e51dae68f9ac64e9209447;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/include/configs/ti_omap5_common.h b/qemu/roms/u-boot/include/configs/ti_omap5_common.h
new file mode 100644
index 000000000..a582fa404
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/ti_omap5_common.h
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2013
+ * Texas Instruments Incorporated.
+ * Sricharan R	  <r.sricharan@ti.com>
+ *
+ * Derived from OMAP4 done by:
+ *	Aneesh V <aneesh@ti.com>
+ *
+ * TI OMAP5 AND DRA7XX common configuration settings
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ *
+ * For more details, please see the technical documents listed at
+ * http://www.ti.com/product/omap5432
+ */
+
+#ifndef __CONFIG_TI_OMAP5_COMMON_H
+#define __CONFIG_TI_OMAP5_COMMON_H
+
+#define CONFIG_OMAP54XX
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_MISC_INIT_R
+#define CONFIG_ARCH_CPU_INIT
+
+#define CONFIG_SYS_CACHELINE_SIZE	64
+
+/* Use General purpose timer 1 */
+#define CONFIG_SYS_TIMERBASE		GPT2_BASE
+
+/*
+ * For the DDR timing information we can either dynamically determine
+ * the timings to use or use pre-determined timings (based on using the
+ * dynamic method.  Default to the static timing infomation.
+ */
+#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_PALMAS_POWER
+#endif
+
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap.h>
+
+#include <configs/ti_armv7_common.h>
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		48000000
+
+/* Per-SoC commands */
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+/*
+ * Environment setup
+ */
+#ifndef PARTS_DEFAULT
+#define PARTS_DEFAULT
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	DEFAULT_LINUX_BOOT_ENV \
+	"console=" CONSOLEDEV ",115200n8\0" \
+	"fdtfile=undefined\0" \
+	"bootpart=0:2\0" \
+	"bootdir=/boot\0" \
+	"bootfile=zImage\0" \
+	"usbtty=cdc_acm\0" \
+	"vram=16M\0" \
+	"partitions=" PARTS_DEFAULT "\0" \
+	"optargs=\0" \
+	"mmcdev=0\0" \
+	"mmcroot=/dev/mmcblk1p2 rw\0" \
+	"mmcrootfstype=ext4 rootwait\0" \
+	"mmcargs=setenv bootargs console=${console} " \
+		"${optargs} " \
+		"vram=${vram} " \
+		"root=${mmcroot} " \
+		"rootfstype=${mmcrootfstype}\0" \
+	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+	"bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+		"source ${loadaddr}\0" \
+	"loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
+	"importbootenv=echo Importing environment from mmc${mmcdev} ...; " \
+		"env import -t ${loadaddr} ${filesize}\0" \
+	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
+	"mmcboot=mmc dev ${mmcdev}; " \
+		"if mmc rescan; then " \
+			"echo SD/MMC found on device ${mmcdev};" \
+			"if run loadbootenv; then " \
+				"echo Loaded environment from ${bootenv};" \
+				"run importbootenv;" \
+			"fi;" \
+			"if test -n $uenvcmd; then " \
+				"echo Running uenvcmd ...;" \
+				"run uenvcmd;" \
+			"fi;" \
+			"if run loadimage; then " \
+				"run loadfdt; " \
+				"echo Booting from mmc${mmcdev} ...; " \
+				"run mmcargs; " \
+				"bootz ${loadaddr} - ${fdtaddr}; " \
+			"fi;" \
+		"fi;\0" \
+	"findfdt="\
+		"if test $board_name = omap5_uevm; then " \
+			"setenv fdtfile omap5-uevm.dtb; fi; " \
+		"if test $board_name = dra7xx; then " \
+			"setenv fdtfile dra7-evm.dtb; fi;" \
+		"if test $fdtfile = undefined; then " \
+			"echo WARNING: Could not determine device tree to use; fi; \0" \
+	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \
+
+#define CONFIG_BOOTCOMMAND \
+	"run findfdt; " \
+	"run mmcboot;" \
+	"setenv mmcdev 1; " \
+	"setenv bootpart 1:2; " \
+	"setenv mmcroot /dev/mmcblk0p2 rw; " \
+	"run mmcboot;" \
+
+
+/*
+ * SPL related defines.  The Public RAM memory map the ROM defines the
+ * area between 0x40300000 and 0x4031E000 as a download area for OMAP5
+ * (dra7xx is larger, but we do not need to be larger at this time).  We
+ * set CONFIG_SPL_DISPLAY_PRINT to have omap_rev_string() called and
+ * print some information.
+ */
+#define CONFIG_SPL_TEXT_BASE		0x40300000
+#define CONFIG_SPL_MAX_SIZE		(0x4031E000 - CONFIG_SPL_TEXT_BASE)
+#define CONFIG_SPL_DISPLAY_PRINT
+#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
+#define CONFIG_SYS_SPL_ARGS_ADDR	(CONFIG_SYS_SDRAM_BASE + \
+					 (128 << 20))
+
+#ifdef CONFIG_NAND
+#define CONFIG_SPL_NAND_AM33XX_BCH	/* ELM support */
+#endif
+
+#endif /* __CONFIG_TI_OMAP5_COMMON_H */