X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Finclude%2Fconfigs%2Fquantum.h;fp=qemu%2Froms%2Fu-boot%2Finclude%2Fconfigs%2Fquantum.h;h=f3540c1421c773d80febacfb83def408713f4344;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/roms/u-boot/include/configs/quantum.h b/qemu/roms/u-boot/include/configs/quantum.h new file mode 100644 index 000000000..f3540c142 --- /dev/null +++ b/qemu/roms/u-boot/include/configs/quantum.h @@ -0,0 +1,430 @@ +/* + * (C) Copyright 2003-2010 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * board/config.h - configuration options, board specific + * changes for 16M board + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + * (easy to change) + */ + +#undef CONFIG_MPC860 +#define CONFIG_MPC850 1 /* This is a MPC850 CPU */ +#define CONFIG_RPXLITE 1 /* QUANTUM is the RPXlite clone */ +#define CONFIG_RMU 1 /* The QUNATUM is based on our RMU */ + +#define CONFIG_SYS_TEXT_BASE 0xfff00000 + +#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ +#undef CONFIG_8xx_CONS_SMC2 +#undef CONFIG_8xx_CONS_NONE +#define CONFIG_BAUDRATE 9600 /* console baudrate = 9600bps */ +#if 0 +#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ +#else +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ +#endif + +/* default developmenmt environment */ + +#define CONFIG_ETHADDR 00:0B:17:00:00:00 + +#define CONFIG_IPADDR 10.10.69.10 +#define CONFIG_SERVERIP 10.10.69.49 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_HOSTNAME QUANTUM +#define CONFIG_ROOTPATH "/opt/eldk/pcc_8xx" + +#define CONFIG_BOOTARGS "root=/dev/ram rw" + +#define CONFIG_BOOTCOMMAND "bootm ff000000" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "serial#=12345\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" + +/* + * Select the more full-featured memory test (Barr embedded systems) + */ +#define CONFIG_SYS_ALT_MEMTEST + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ + + +/* M48T02 Paralled access timekeeper with same interface as the M48T35A*/ +#define CONFIG_RTC_M48T35A 1 + +#if 0 +#define CONFIG_WATCHDOG 1 /* watchdog enabled */ +#else +#undef CONFIG_WATCHDOG +#endif + +/* NVRAM and RTC */ +#define CONFIG_SYS_NVRAM_BASE_ADDR 0xFA000000 +#define CONFIG_SYS_NVRAM_SIZE 2048 + + +/* + * Command line configuration. + */ +#include + +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP + + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_BOOTFILESIZE + + +#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ +#define CONFIG_AUTOBOOT_PROMPT \ + "\nEnter password - autoboot in %d sec...\n", bootdelay +#define CONFIG_AUTOBOOT_DELAY_STR "system" +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x00040000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x01f00000 /* 256K ... 15 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ + +/* + * Low Level Configuration Settings + * (address mappings, register initial values, etc.) + * You should know what you are doing if you make changes here. + */ +/*----------------------------------------------------------------------- + * Internal Memory Mapped Register + */ +#define CONFIG_SYS_IMMR 0xFA200000 + +/*----------------------------------------------------------------------- + * Definitions for initial stack pointer and data area (in DPRAM) + */ +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR +#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +/*----------------------------------------------------------------------- + * Start addresses for the final memory configuration + * (Set up by the startup code) + * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 + */ +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_FLASH_BASE 0xFF000000 + +#if 1 + #define CONFIG_FLASH_CFI_DRIVER +#else + #undef CONFIG_FLASH_CFI_DRIVER +#endif + + +#ifdef CONFIG_FLASH_CFI_DRIVER + #define CONFIG_SYS_FLASH_CFI 1 + #undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE + #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} +#endif + +/*%%% #define CONFIG_SYS_FLASH_BASE 0xFFF00000 */ +#if defined(DEBUG) || defined(CONFIG_CMD_IDE) +#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#else +#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */ +#endif +#define CONFIG_SYS_MONITOR_BASE 0xFFF00000 +/*%%% #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE */ +#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/*----------------------------------------------------------------------- + * FLASH organization + */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ + +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OFFSET 0x00040000 /* Offset of Environment Sector absolute address 0xfff40000*/ +#define CONFIG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) + +/* FPGA */ +#define CONFIG_MISC_INIT_R +#define CONFIG_SYS_FPGA_SPARTAN2 +#define CONFIG_SYS_FPGA_PROG_FEEDBACK + + +/*----------------------------------------------------------------------- + * Reset address + */ +#define CONFIG_SYS_RESET_ADDRESS ((ulong)((((immap_t *)CONFIG_SYS_IMMR)->im_clkrst.res))) + +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ +#if defined(CONFIG_CMD_KGDB) +#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ +#endif + +/*----------------------------------------------------------------------- + * SYPCR - System Protection Control 11-9 + * SYPCR can only be written once after reset! + *----------------------------------------------------------------------- + * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze + */ +#if defined(CONFIG_WATCHDOG) +#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ + SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) +#else +#define CONFIG_SYS_SYPCR (SYPCR_SWTC | 0x00000600 | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) +#endif + +/*----------------------------------------------------------------------- + * SIUMCR - SIU Module Configuration 11-6 + *----------------------------------------------------------------------- + * PCMCIA config., multi-function pin tri-state + */ +#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC10) + +/*----------------------------------------------------------------------- + * TBSCR - Time Base Status and Control 11-26 + *----------------------------------------------------------------------- + * Clear Reference Interrupt Status, Timebase freezing enabled + */ +#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF | TBSCR_TBE) + +/*----------------------------------------------------------------------- + * RTCSC - Real-Time Clock Status and Control Register 11-27 + *----------------------------------------------------------------------- + */ +/*%%%#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) */ +#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_RTE) + +/*----------------------------------------------------------------------- + * PISCR - Periodic Interrupt Status and Control 11-31 + *----------------------------------------------------------------------- + * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled + */ +#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) + +/*----------------------------------------------------------------------- + * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 + *----------------------------------------------------------------------- + * Reset PLL lock status sticky bit, timer expired status bit and timer + * interrupt status bit + * + * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)! + */ +/* up to 50 MHz we use a 1:1 clock */ +#define CONFIG_SYS_PLPRCR ( (5 << PLPRCR_MF_SHIFT) | PLPRCR_TEXPS ) + +/*----------------------------------------------------------------------- + * SCCR - System Clock and reset Control Register 15-27 + *----------------------------------------------------------------------- + * Set clock output, timebase and RTC source and divider, + * power management and some other internal clocks + */ +#define SCCR_MASK SCCR_EBDF00 +/* up to 50 MHz we use a 1:1 clock */ +#define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_TBS) + +/*----------------------------------------------------------------------- + * PCMCIA stuff + *----------------------------------------------------------------------- + * + */ +#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) +#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) +#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) +#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) +#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) +#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) + +/*----------------------------------------------------------------------- + * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) + *----------------------------------------------------------------------- + */ + +#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ +#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ + +#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ +#undef CONFIG_IDE_LED /* LED for ide not supported */ +#undef CONFIG_IDE_RESET /* reset for ide not supported */ + +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ + +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 + +#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR + +/* Offset for data I/O */ +#define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) + +/* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) + +/* Offset for alternate registers */ +#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 + +/*----------------------------------------------------------------------- + * + *----------------------------------------------------------------------- + * + */ +/*#define CONFIG_SYS_DER 0x2002000F*/ +#define CONFIG_SYS_DER 0 + +/* + * Init Memory Controller: + * + * BR0 and OR0 (FLASH) + */ + +#define FLASH_BASE_PRELIM 0xFE000000 /* FLASH base */ +#define CONFIG_SYS_PRELIM_OR_AM 0xFE000000 /* OR addr mask */ + +/* FLASH timing: ACS = 0, TRLX = 0, CSNT = 0, SCY = 4, ETHR = 0, BIH = 1 */ +#define CONFIG_SYS_OR_TIMING_FLASH (OR_SCY_4_CLK | OR_BI) + +#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) +#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE_PRELIM & BR_BA_MSK) | BR_V) + +/* + * BR1 and OR1 (SDRAM) + * + */ +#define SDRAM_BASE_PRELIM 0x00000000 /* SDRAM base */ +#define SDRAM_MAX_SIZE 0x08000000 /* max 128 MB */ + +/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ +#define CONFIG_SYS_OR_TIMING_SDRAM 0x00000E00 + +#define CONFIG_SYS_OR1_PRELIM (0xF0000000 | CONFIG_SYS_OR_TIMING_SDRAM ) /* map 256 MB */ +#define CONFIG_SYS_BR1_PRELIM ((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) + +/* RPXLITE mem setting */ +#define CONFIG_SYS_BR3_PRELIM 0xFA400001 /* FPGA */ +#define CONFIG_SYS_OR3_PRELIM 0xFFFF8910 + +#define CONFIG_SYS_BR4_PRELIM 0xFA000401 /* NVRAM&SRAM */ +#define CONFIG_SYS_OR4_PRELIM 0xFFFE0970 + +/* + * Memory Periodic Timer Prescaler + */ + +/* periodic timer for refresh */ +#define CONFIG_SYS_MAMR_PTA 20 + +/* + * Refresh clock Prescalar + */ +#define CONFIG_SYS_MPTPR MPTPR_PTP_DIV2 + +/* + * MAMR settings for SDRAM + */ + +/* 9 column SDRAM */ +#define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ + MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ + MAMR_RLFA_16X | MAMR_WLFA_16X | MAMR_TLFA_16X) + +/* + * BCSRx + * + * Board Status and Control Registers + * + */ + +#define BCSR0 0xFA400000 +#define BCSR1 0xFA400001 +#define BCSR2 0xFA400002 +#define BCSR3 0xFA400003 + +#define BCSR0_ENMONXCVR 0x01 /* Monitor XVCR Control */ +#define BCSR0_ENNVRAM 0x02 /* CS4# Control */ +#define BCSR0_LED5 0x04 /* LED5 control 0='on' 1='off' */ +#define BCSR0_LED4 0x08 /* LED4 control 0='on' 1='off' */ +#define BCSR0_FULLDPLX 0x10 /* Ethernet XCVR Control */ +#define BCSR0_COLTEST 0x20 +#define BCSR0_ETHLPBK 0x40 +#define BCSR0_ETHEN 0x80 + +#define BCSR1_PCVCTL7 0x01 /* PC Slot B Control */ +#define BCSR1_PCVCTL6 0x02 +#define BCSR1_PCVCTL5 0x04 +#define BCSR1_PCVCTL4 0x08 +#define BCSR1_IPB5SEL 0x10 + +#define BCSR2_ENPA5HDR 0x08 /* USB Control */ +#define BCSR2_ENUSBCLK 0x10 +#define BCSR2_USBPWREN 0x20 +#define BCSR2_USBSPD 0x40 +#define BCSR2_USBSUSP 0x80 + +#define BCSR3_BWRTC 0x01 /* Real Time Clock Battery */ +#define BCSR3_BWNVR 0x02 /* NVRAM Battery */ +#define BCSR3_RDY_BSY 0x04 /* Flash Operation */ +#define BCSR3_RPXL 0x08 /* Reserved (reads back '1') */ +#define BCSR3_D27 0x10 /* Dip Switch settings */ +#define BCSR3_D26 0x20 +#define BCSR3_D25 0x40 +#define BCSR3_D24 0x80 + +#endif /* __CONFIG_H */