X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Finclude%2Fconfigs%2Fo2d300.h;fp=qemu%2Froms%2Fu-boot%2Finclude%2Fconfigs%2Fo2d300.h;h=1af53834f757916f4f0339445a069bb23e43de85;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/include/configs/o2d300.h b/qemu/roms/u-boot/include/configs/o2d300.h
new file mode 100644
index 000000000..1af53834f
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/o2d300.h
@@ -0,0 +1,81 @@
+/*
+ * (C) Copyright 2012
+ * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ * 0xFC000000   boot low boot high (standard configuration)
+ * 0x00100000   boot from RAM (for testing only)
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE	0xfc000000	/* Standard: boot low */
+#endif
+
+/* Board specific flash config */
+#define CONFIG_SYS_FLASH_BASE		0xfc000000
+#define CONFIG_SYS_FLASH_SIZE		0x04000000      /* maximum 64MB */
+/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	512
+
+/*
+ * Include common defines for all ifm boards
+ */
+#include "o2dnt-common.h"
+
+/*
+ * GPIO configuration:
+ * CS1 SDRAM activate + no CAN + no PCI
+ */
+#define CONFIG_SYS_GPS_PORT_CONFIG      0x8000A004
+
+/* Other board specific configs */
+#define CONFIG_SYS_BOOTCS_CFG		0x00057d01
+#define CONFIG_SYS_RESET_ADDRESS	0xfc000000
+
+#define CONFIG_SYS_MEMTEST_START	0x00100000      /* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x07f00000	/* 1 - 127 MB in DRAM */
+
+/* Use redundant environment */
+#define CONFIG_ENV_ADDR_REDUND		(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND		(CONFIG_ENV_SIZE)
+
+#define CONFIG_BOARD_NAME		"o2d300"
+#define CONFIG_BOARD_BOOTCMD		"run dhcp_boot"
+#define CONFIG_BOARD_MEM_LIMIT		xstr(126)
+#define BOARD_POST_CRC32_END		xstr(0x02000000)
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	CONFIG_IFM_DEFAULT_ENV_SETTINGS					\
+	CONFIG_IFM_DEFAULT_ENV_OLD					\
+	CONFIG_IFM_DEFAULT_ENV_NEW					\
+	"autoload=no\0"							\
+	"dhcp_boot=run dhcpcmd;run flash_mtd\0"				\
+	"flash_mtd=run mtd_args addip addmem;"				\
+		"bootm ${kernel_addr}\0"				\
+	"mtd_args=setenv bootargs root=/dev/mtdblock4 "			\
+		"rw rootfstype=cramfs\0"				\
+	"linbot=fc080000\0"						\
+	"lintop=fc17ffff\0"						\
+	"rambot=fc180000\0"						\
+	"ramtop=fc57ffff\0"						\
+	"jffbot=fc580000\0"						\
+	"jfftop=fd39ffff\0"						\
+	"ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"			\
+	"ubotop=fc03ffff\0"						\
+	"halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0"	\
+	"halbot=fd3a0000\0"						\
+	"haltop=fdf9ffff\0"						\
+	"progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};"	\
+		"cp.b ${fileaddr} ${halbot} ${filesize}\0"		\
+	"kernel_addr=0xfc060000\0"					\
+	"ramdisk_addr=0xfc160000\0"					\
+	"master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};"		\
+		"mw f0000b04 ${IOpin};mw f0000b10 0x20\0"		\
+	"netretry=once\0"						\
+	"protcmd=protect on ${linbot} ${lintop};"			\
+		"protect on ${rambot} ${ramtop}\0"			\
+	"o2derror=def_env\0"						\
+	"sensorType=O2D300AA\0"