X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Finclude%2Fconfigs%2Fnios2-generic.h;fp=qemu%2Froms%2Fu-boot%2Finclude%2Fconfigs%2Fnios2-generic.h;h=1578b010b94a36dc6cd768bef26a3ff14521c579;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/include/configs/nios2-generic.h b/qemu/roms/u-boot/include/configs/nios2-generic.h
new file mode 100644
index 000000000..1578b010b
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/nios2-generic.h
@@ -0,0 +1,135 @@
+/*
+ * (C) Copyright 2005, Psyent Corporation <www.psyent.com>
+ * Scott McNutt <smcnutt@psyent.com>
+ * (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * BOARD/CPU
+ */
+#include "../board/altera/nios2-generic/custom_fpga.h" /* fpga parameters */
+#define CONFIG_BOARD_NAME "nios2-generic" /* custom board name */
+#define CONFIG_BOARD_EARLY_INIT_F	/* enable early board-spec. init */
+#define CONFIG_SYS_NIOS_SYSID_BASE	CONFIG_SYS_SYSID_BASE
+
+/*
+ * SERIAL
+ */
+#define CONFIG_ALTERA_UART
+#if defined(CONFIG_ALTERA_JTAG_UART)
+# define CONFIG_SYS_NIOS_CONSOLE	CONFIG_SYS_JTAG_UART_BASE
+#else
+# define CONFIG_SYS_NIOS_CONSOLE	CONFIG_SYS_UART_BASE
+#endif
+
+#define CONFIG_ALTERA_JTAG_UART_BYPASS
+#define CONFIG_SYS_NIOS_FIXEDBAUD
+#define CONFIG_BAUDRATE		CONFIG_SYS_UART_BAUD
+#define CONFIG_SYS_BAUDRATE_TABLE	{CONFIG_BAUDRATE}
+#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* Suppress console info */
+
+/*
+ * TIMER
+ */
+#define CONFIG_SYS_LOW_RES_TIMER
+#define CONFIG_SYS_NIOS_TMRBASE	CONFIG_SYS_TIMER_BASE
+#define CONFIG_SYS_NIOS_TMRIRQ		CONFIG_SYS_TIMER_IRQ
+#define CONFIG_SYS_NIOS_TMRMS		10	/* Desired period (msec)*/
+#define CONFIG_SYS_NIOS_TMRCNT \
+	(CONFIG_SYS_NIOS_TMRMS * (CONFIG_SYS_TIMER_FREQ / 1000) - 1)
+
+/*
+ * STATUS LED
+ */
+#define CONFIG_ALTERA_PIO
+#define CONFIG_SYS_ALTERA_PIO_NUM	1
+#define CONFIG_SYS_ALTERA_PIO_GPIO_NUM	LED_PIO_WIDTH
+
+#define CONFIG_STATUS_LED		/* Enable status driver */
+#define CONFIG_BOARD_SPECIFIC_LED
+#define CONFIG_GPIO_LED		/* Enable GPIO LED driver */
+#define CONFIG_GPIO			/* Enable GPIO driver */
+
+#define STATUS_LED_BIT			0	/* Bit-0 on GPIO */
+#define STATUS_LED_STATE		1	/* Blinking */
+#define STATUS_LED_PERIOD	(500 / CONFIG_SYS_NIOS_TMRMS) /* 500 msec */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+#undef CONFIG_CMD_BOOTD
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_ITEST
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_SETGETDCR
+#undef CONFIG_CMD_XIMG
+
+#ifdef CONFIG_CMD_NET
+# define CONFIG_CMD_DHCP
+# define CONFIG_CMD_PING
+#endif
+
+/*
+ * ENVIRONMENT -- Put environment in sector CONFIG_SYS_MONITOR_LEN above
+ * CONFIG_SYS_RESET_ADDR, since we assume the monitor is stored at the
+ * reset address, no? This will keep the environment in user region
+ * of flash. NOTE: the monitor length must be multiple of sector size
+ * (which is common practice).
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+
+#define CONFIG_ENV_SIZE		0x10000	/* 64k, 1 sector */
+#define CONFIG_ENV_OVERWRITE		/* Serial change Ok	*/
+#define CONFIG_ENV_ADDR		((CONFIG_SYS_RESET_ADDR + \
+					  CONFIG_SYS_MONITOR_LEN) | \
+					 CONFIG_SYS_FLASH_BASE)
+
+/*
+ * MEMORY ORGANIZATION
+ * -Monitor at top of sdram.
+ * -The heap is placed below the monitor
+ * -The stack is placed below the heap (&grows down).
+ */
+#define CONFIG_MONITOR_IS_IN_RAM
+#define CONFIG_SYS_MONITOR_LEN		0x40000	/* Reserve 256k */
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_SDRAM_BASE + \
+					 CONFIG_SYS_SDRAM_SIZE - \
+					 CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 0x20000)
+#define CONFIG_SYS_MALLOC_BASE		(CONFIG_SYS_MONITOR_BASE - \
+					 CONFIG_SYS_MALLOC_LEN)
+#define CONFIG_SYS_INIT_SP		CONFIG_SYS_MALLOC_BASE
+
+/*
+ * MISC
+ */
+#define CONFIG_SYS_LONGHELP		/* Provide extended help */
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O buf size */
+#define CONFIG_SYS_MAXARGS		16	/* Max command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE /* Bootarg buf size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + \
+					 16)	/* Print buf size */
+#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_INIT_SP - 0x20000)
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_SYS_HUSH_PARSER
+
+#endif /* __CONFIG_H */