X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Finclude%2Fconfigs%2FTB5200.h;fp=qemu%2Froms%2Fu-boot%2Finclude%2Fconfigs%2FTB5200.h;h=b4daedceea9918c4e27c648d4972389b63a372a0;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/include/configs/TB5200.h b/qemu/roms/u-boot/include/configs/TB5200.h
new file mode 100644
index 000000000..b4daedcee
--- /dev/null
+++ b/qemu/roms/u-boot/include/configs/TB5200.h
@@ -0,0 +1,496 @@
+/*
+ * (C) Copyright 2003-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004-2006
+ * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5200		1	/* This is an MPC5200 CPU */
+#define CONFIG_TQM5200		1	/* ... on TQM5200 module */
+#define CONFIG_TB5200		1	/* ... on a TB5200 base board */
+
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ * 0xFC000000	boot low (standard configuration with room for
+ *		max 64 MByte Flash ROM)
+ * 0xFFF00000	boot high (for a backup copy of U-Boot)
+ * 0x00100000	boot from RAM (for testing only)
+ */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE	0xFC000000
+#endif
+
+#define CONFIG_SYS_MPC5XXX_CLKIN	33000000 /* ... running at 33.000000MHz */
+
+#define CONFIG_HIGH_BATS	1	/* High BATs supported */
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE	1	/* default console is on PSC1 */
+#define CONFIG_PSC_CONSOLE2	6	/* second console is on PSC6 */
+#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
+
+/*
+ * Video console
+ */
+#if 1
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_SM501
+#define CONFIG_VIDEO_SM501_32BPP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#endif
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/* POST support */
+#define CONFIG_POST		(CONFIG_SYS_POST_MEMORY   | \
+				 CONFIG_SYS_POST_CPU	   | \
+				 CONFIG_SYS_POST_I2C)
+
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
+#endif
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_USB
+
+#ifdef CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#endif
+
+#ifdef CONFIG_POST
+#define CONFIG_CMD_DIAG
+#endif
+
+
+#define	CONFIG_TIMESTAMP		/* display image timestamps */
+
+#if (CONFIG_SYS_TEXT_BASE == 0xFC000000)		/* Boot low */
+#   define CONFIG_SYS_LOWBOOT		1
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT	"echo;" \
+	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#if defined(CONFIG_TQM5200_B)
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"rootpath=/opt/eldk/ppc_6xx\0"					\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_self=run ramargs addip;"					\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"bootfile=/tftpboot/tqm5200/uImage\0"				\
+	"load=tftp 200000 ${u-boot}\0"					\
+	"u-boot=/tftpboot/tqm5200/u-boot.bin\0"				\
+	"update=protect off FC000000 FC07FFFF;"				\
+		"erase FC000000 FC07FFFF;"				\
+		"cp.b 200000 FC000000 ${filesize};"			\
+		"protect on FC000000 FC07FFFF\0"			\
+	""
+#else
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"rootpath=/opt/eldk/ppc_6xx\0"					\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_self=run ramargs addip;"					\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"bootfile=/tftpboot/tqm5200/uImage\0"				\
+	"load=tftp 200000 $(u-boot)\0"					\
+	"u-boot=/tftpboot/tqm5200/u-boot.bin\0"				\
+	"update=protect off FC000000 FC05FFFF;"				\
+		"erase FC000000 FC05FFFF;"				\
+		"cp.b 200000 FC000000 ${filesize};"			\
+		"protect on FC000000 FC05FFFF\0"			\
+	""
+#endif /* CONFIG_TQM5200_B */
+
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
+
+/*
+ * IPB Bus clocking configuration.
+ */
+#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK		/* define for 133MHz speed */
+
+#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
+/*
+ * PCI Bus clocking configuration
+ *
+ * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
+ * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
+ * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
+ */
+#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2		/* define for 66MHz speed */
+#endif
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
+#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #2 */
+
+/*
+ * I2C clock frequency
+ *
+ * Please notice, that the resulting clock frequency could differ from the
+ * configured value. This is because the I2C clock is derived from system
+ * clock over a frequency divider with only a few divider values. U-boot
+ * calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
+ * approximation allways lies below the configured value, never above.
+ */
+#define CONFIG_SYS_I2C_SPEED		100000 /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+
+/*
+ * EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
+ * also). For other EEPROMs configuration should be verified. On Mini-FAP the
+ * EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
+ * same configuration could be used.
+ */
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write */
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
+
+/* List of I2C addresses to be verified by POST */
+#undef CONFIG_SYS_POST_I2C_ADDRS
+#define CONFIG_SYS_POST_I2C_ADDRS	{CONFIG_SYS_I2C_EEPROM_ADDR,	\
+					 CONFIG_SYS_I2C_RTC_ADDR,	\
+					 CONFIG_SYS_I2C_SLAVE}
+
+/*
+ * Flash configuration
+ */
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_TEXT_BASE /* 0xFC000000 */
+
+/* use CFI flash driver */
+#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant */
+#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver */
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_BOOTCS_START }
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_SIZE		0x04000000 /* 64 MByte */
+#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max num of sects on one chip */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+
+#if !defined(CONFIG_SYS_LOWBOOT)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00760000 + 0x00800000)
+#else	/* CONFIG_SYS_LOWBOOT */
+#if defined(CONFIG_TQM5200_B)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00080000)
+#else
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x00060000)
+#endif /* CONFIG_TQM5200_B */
+#endif	/* CONFIG_SYS_LOWBOOT */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of flash banks
+					   (= chip selects) */
+
+/* Dynamic MTD partition support */
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE		/* needed for mtdparts commands */
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT		"nor0=TQM5200-0"
+#if defined(CONFIG_TQM5200_B)
+#define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:768k(firmware),"	\
+						"1280k(kernel),"	\
+						"2m(initrd),"		\
+						"4m(small-fs),"		\
+						"16m(big-fs),"		\
+						"8m(misc)"
+#else
+#define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
+						"1408k(kernel),"	\
+						"2m(initrd),"		\
+						"4m(small-fs),"		\
+						"16m(big-fs),"		\
+						"8m(misc)"
+#endif /* CONFIG_TQM5200_B */
+
+/*
+ * Environment settings
+ */
+#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_SIZE		0x10000
+#if defined(CONFIG_TQM5200_B)
+#define CONFIG_ENV_SECT_SIZE	0x40000
+#else
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
+#endif /* CONFIG_TQM5200_B */
+
+/*
+ * Memory map
+ */
+#define CONFIG_SYS_MBAR		0xF0000000
+#define CONFIG_SYS_SDRAM_BASE		0x00000000
+#define CONFIG_SYS_DEFAULT_MBAR	0x80000000
+
+/* Use ON-Chip SRAM until RAM will be available */
+#define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
+#ifdef CONFIG_POST
+/* preserve space for the post_word at end of on-chip SRAM */
+#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_POST_SIZE
+#else
+#define CONFIG_SYS_INIT_RAM_SIZE	MPC5XXX_SRAM_SIZE
+#endif
+
+
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
+#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
+#   define CONFIG_SYS_RAMBOOT		1
+#endif
+
+#if defined(CONFIG_TQM5200_B)
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)	/* Reserve 512 kB for Monitor	*/
+#else
+#define CONFIG_SYS_MONITOR_LEN		(384 << 10)	/* Reserve 384 kB for Monitor	*/
+#endif /* CONFIG_TQM5200_B */
+#define CONFIG_SYS_MALLOC_LEN		(1024 << 10)	/* Reserve 1024 kB for malloc()	*/
+#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC	1
+#define CONFIG_MPC5xxx_FEC_MII100
+/*
+ * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
+ */
+/* #define CONFIG_MPC5xxx_FEC_MII10 */
+#define CONFIG_PHY_ADDR		0x00
+
+/*
+ * GPIO configuration
+ *
+ * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1):
+ *	Bit 0 (mask: 0x80000000): 1
+ * use ALT CAN position: Bits 2-3 (mask: 0x30000000):
+ *	00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
+ *	01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
+ *	      Use for REV200 STK52XX boards. Do not use with REV100 modules
+ *	      (because, there I2C1 is used as I2C bus)
+ * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
+ * use PSC2 as CAN: Bits 25:27 (mask: 0x00000030)
+ *	000 -> All PSC2 pins are GIOPs
+ *	001 -> CAN1/2 on PSC2 pins
+ *	       Use for REV100 STK52xx boards
+ * use PSC3: Bits 20:23 (mask: 0x00000300):
+ *      0001 -> USB2
+ *      0000 -> GPIO
+ * use PSC6:
+ *   on STK52xx:
+ *	use as UART. Pins PSC6_0 to PSC6_3 are used.
+ *	Bits 9:11 (mask: 0x00700000):
+ *	   101 -> PSC6 : Extended POST test is not available
+ *   on MINI-FAP and TQM5200_IB:
+ *	use PSC6_0 to PSC6_3 as GPIO: Bits 9:11 (mask: 0x00700000):
+ *	   000 -> PSC6 could not be used as UART, CODEC or IrDA
+ *   GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST
+ *   tests.
+ */
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x81500114
+
+/*
+ * RTC configuration
+ */
+#define CONFIG_RTC_M41T11	1
+#define CONFIG_SYS_I2C_RTC_ADDR	0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR	1900    /* because Linux uses the same base
+					   year */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	    */
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history */
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size  */
+#else
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size  */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CONFIG_SYS_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
+/* Enable an alternate, more extensive memory test */
+#define CONFIG_SYS_ALT_MEMTEST
+
+#define CONFIG_SYS_MEMTEST_START	0x00100000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00f00000	/* 1 ... 15 MB in DRAM	*/
+
+#define CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address */
+
+/*
+ * Enable loopw command.
+ */
+#define CONFIG_LOOPW
+
+/*
+ * Various low-level settings
+ */
+#define CONFIG_SYS_HID0_INIT		HID0_ICE | HID0_ICFI
+#define CONFIG_SYS_HID0_FINAL		HID0_ICE
+
+#define CONFIG_SYS_BOOTCS_START	CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_BOOTCS_SIZE		CONFIG_SYS_FLASH_SIZE
+#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
+#define CONFIG_SYS_BOOTCS_CFG		0x0008DF30 /* for pci_clk  = 66 MHz */
+#else
+#define CONFIG_SYS_BOOTCS_CFG		0x0004DF30 /* for pci_clk = 33 MHz */
+#endif
+#define CONFIG_SYS_CS0_START		CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_CS0_SIZE		CONFIG_SYS_FLASH_SIZE
+
+#define CONFIG_LAST_STAGE_INIT
+
+/*
+ * SRAM - Do not map below 2 GB in address space, because this area is used
+ * for SDRAM autosizing.
+ */
+#define CONFIG_SYS_CS2_START		0xE5000000
+#define CONFIG_SYS_CS2_SIZE		0x100000	/* 1 MByte */
+#define CONFIG_SYS_CS2_CFG		0x0004D930
+
+/*
+ * Grafic controller - Do not map below 2 GB in address space, because this
+ * area is used for SDRAM autosizing.
+ */
+#define SM501_FB_BASE		0xE0000000
+#define CONFIG_SYS_CS1_START		(SM501_FB_BASE)
+#define CONFIG_SYS_CS1_SIZE		0x4000000	/* 64 MByte */
+#define CONFIG_SYS_CS1_CFG		0x8F48FF70
+#define SM501_MMIO_BASE		CONFIG_SYS_CS1_START + 0x03E00000
+
+#define CONFIG_SYS_CS_BURST		0x00000000
+#define CONFIG_SYS_CS_DEADCYCLE	0x33333311	/* 1 dead cycle for flash and SM501 */
+
+#define CONFIG_SYS_RESET_ADDRESS	0xff000000
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK	0x0001BBBB
+#define CONFIG_USB_CONFIG	0x00001000
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef	CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card Adapter */
+
+#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
+#undef	CONFIG_IDE_LED			/* LED	 for ide not supported	*/
+
+#define CONFIG_IDE_RESET		/* reset for ide supported	*/
+#define CONFIG_IDE_PREINIT
+
+#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
+#define CONFIG_SYS_IDE_MAXDEVICE	2	/* max. 2 drives per IDE bus	*/
+
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
+
+#define CONFIG_SYS_ATA_BASE_ADDR	MPC5XXX_ATA
+
+/* Offset for data I/O			*/
+#define CONFIG_SYS_ATA_DATA_OFFSET	(0x0060)
+
+/* Offset for normal register accesses	*/
+#define CONFIG_SYS_ATA_REG_OFFSET	(CONFIG_SYS_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers	*/
+#define CONFIG_SYS_ATA_ALT_OFFSET	(0x005C)
+
+/* Interval between registers						     */
+#define CONFIG_SYS_ATA_STRIDE		4
+
+#endif /* __CONFIG_H */