X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Fdrivers%2Fusb%2Fhost%2Fehci-mx5.c;fp=qemu%2Froms%2Fu-boot%2Fdrivers%2Fusb%2Fhost%2Fehci-mx5.c;h=7566c61284eb2c29d2a0fc1cc423e4fd219570f1;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/roms/u-boot/drivers/usb/host/ehci-mx5.c b/qemu/roms/u-boot/drivers/usb/host/ehci-mx5.c new file mode 100644 index 000000000..7566c6128 --- /dev/null +++ b/qemu/roms/u-boot/drivers/usb/host/ehci-mx5.c @@ -0,0 +1,258 @@ +/* + * Copyright (c) 2009 Daniel Mack + * Copyright (C) 2010 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "ehci.h" + +#define MX5_USBOTHER_REGS_OFFSET 0x800 + + +#define MXC_OTG_OFFSET 0 +#define MXC_H1_OFFSET 0x200 +#define MXC_H2_OFFSET 0x400 +#define MXC_H3_OFFSET 0x600 + +#define MXC_USBCTRL_OFFSET 0 +#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 +#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc +#define MXC_USB_CTRL_1_OFFSET 0x10 +#define MXC_USBH2CTRL_OFFSET 0x14 +#define MXC_USBH3CTRL_OFFSET 0x18 + +/* USB_CTRL */ +/* OTG wakeup intr enable */ +#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) +/* OTG power mask */ +#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) +/* OTG power pin polarity */ +#define MXC_OTG_UCTRL_O_PWR_POL_BIT (1 << 24) +/* Host1 ULPI interrupt enable */ +#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) +/* HOST1 wakeup intr enable */ +#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) +/* HOST1 power mask */ +#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) +/* HOST1 power pin polarity */ +#define MXC_H1_UCTRL_H1_PWR_POL_BIT (1 << 8) + +/* USB_PHY_CTRL_FUNC */ +/* OTG Polarity of Overcurrent */ +#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9) +/* OTG Disable Overcurrent Event */ +#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) +/* UH1 Polarity of Overcurrent */ +#define MXC_H1_OC_POL_BIT (1 << 6) +/* UH1 Disable Overcurrent Event */ +#define MXC_H1_OC_DIS_BIT (1 << 5) +/* OTG Power Pin Polarity */ +#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3) + +/* USBH2CTRL */ +#define MXC_H2_UCTRL_H2_OC_POL_BIT (1 << 31) +#define MXC_H2_UCTRL_H2_OC_DIS_BIT (1 << 30) +#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8) +#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7) +#define MXC_H2_UCTRL_H2PM_BIT (1 << 4) +#define MXC_H2_UCTRL_H2_PWR_POL_BIT (1 << 4) + +/* USBH3CTRL */ +#define MXC_H3_UCTRL_H3_OC_POL_BIT (1 << 31) +#define MXC_H3_UCTRL_H3_OC_DIS_BIT (1 << 30) +#define MXC_H3_UCTRL_H3UIE_BIT (1 << 8) +#define MXC_H3_UCTRL_H3WIE_BIT (1 << 7) +#define MXC_H3_UCTRL_H3_PWR_POL_BIT (1 << 4) + +/* USB_CTRL_1 */ +#define MXC_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) + +int mxc_set_usbcontrol(int port, unsigned int flags) +{ + unsigned int v; + void __iomem *usb_base = (void __iomem *)OTG_BASE_ADDR; + void __iomem *usbother_base; + int ret = 0; + + usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; + + switch (port) { + case 0: /* OTG port */ + if (flags & MXC_EHCI_INTERNAL_PHY) { + v = __raw_readl(usbother_base + + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_OTG_PHYCTRL_OC_POL_BIT; + else + v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT; + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + /* OC/USBPWR is used */ + v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; + else + /* OC/USBPWR is not used */ + v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; +#ifdef CONFIG_MX51 + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MXC_OTG_PHYCTRL_PWR_POL_BIT; + else + v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT; +#endif + __raw_writel(v, usbother_base + + MXC_USB_PHY_CTR_FUNC_OFFSET); + + v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); +#ifdef CONFIG_MX51 + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_OTG_UCTRL_OPM_BIT; + else + v |= MXC_OTG_UCTRL_OPM_BIT; +#endif +#ifdef CONFIG_MX53 + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MXC_OTG_UCTRL_O_PWR_POL_BIT; + else + v &= ~MXC_OTG_UCTRL_O_PWR_POL_BIT; +#endif + __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); + } + break; + case 1: /* Host 1 ULPI */ +#ifdef CONFIG_MX51 + /* The clock for the USBH1 ULPI port will come externally + from the PHY. */ + v = __raw_readl(usbother_base + MXC_USB_CTRL_1_OFFSET); + __raw_writel(v | MXC_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + + MXC_USB_CTRL_1_OFFSET); +#endif + + v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); +#ifdef CONFIG_MX51 + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask unused */ + else + v |= MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask used */ +#endif +#ifdef CONFIG_MX53 + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MXC_H1_UCTRL_H1_PWR_POL_BIT; + else + v &= ~MXC_H1_UCTRL_H1_PWR_POL_BIT; +#endif + __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); + + v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_H1_OC_POL_BIT; + else + v &= ~MXC_H1_OC_POL_BIT; + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */ + else + v |= MXC_H1_OC_DIS_BIT; /* OC is not used */ + __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + + break; + case 2: /* Host 2 ULPI */ + v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET); +#ifdef CONFIG_MX51 + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask unused */ + else + v |= MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask used */ +#endif +#ifdef CONFIG_MX53 + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_H2_UCTRL_H2_OC_POL_BIT; + else + v &= ~MXC_H2_UCTRL_H2_OC_POL_BIT; + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H2_UCTRL_H2_OC_DIS_BIT; /* OC is used */ + else + v |= MXC_H2_UCTRL_H2_OC_DIS_BIT; /* OC is not used */ + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MXC_H2_UCTRL_H2_PWR_POL_BIT; + else + v &= ~MXC_H2_UCTRL_H2_PWR_POL_BIT; +#endif + __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET); + break; +#ifdef CONFIG_MX53 + case 3: /* Host 3 ULPI */ + v = __raw_readl(usbother_base + MXC_USBH3CTRL_OFFSET); + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_H3_UCTRL_H3_OC_POL_BIT; + else + v &= ~MXC_H3_UCTRL_H3_OC_POL_BIT; + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H3_UCTRL_H3_OC_DIS_BIT; /* OC is used */ + else + v |= MXC_H3_UCTRL_H3_OC_DIS_BIT; /* OC is not used */ + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MXC_H3_UCTRL_H3_PWR_POL_BIT; + else + v &= ~MXC_H3_UCTRL_H3_PWR_POL_BIT; + __raw_writel(v, usbother_base + MXC_USBH3CTRL_OFFSET); + break; +#endif + } + + return ret; +} + +int __weak board_ehci_hcd_init(int port) +{ + return 0; +} + +void __weak board_ehci_hcd_postinit(struct usb_ehci *ehci, int port) +{ +} + +int ehci_hcd_init(int index, enum usb_init_type init, + struct ehci_hccr **hccr, struct ehci_hcor **hcor) +{ + struct usb_ehci *ehci; + + set_usboh3_clk(); + enable_usboh3_clk(true); + set_usb_phy_clk(); + enable_usb_phy1_clk(true); + enable_usb_phy2_clk(true); + mdelay(1); + + /* Do board specific initialization */ + board_ehci_hcd_init(CONFIG_MXC_USB_PORT); + + ehci = (struct usb_ehci *)(OTG_BASE_ADDR + + (0x200 * CONFIG_MXC_USB_PORT)); + *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); + *hcor = (struct ehci_hcor *)((uint32_t)*hccr + + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); + setbits_le32(&ehci->usbmode, CM_HOST); + + __raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc); + setbits_le32(&ehci->portsc, USB_EN); + + mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS); + mdelay(10); + + /* Do board specific post-initialization */ + board_ehci_hcd_postinit(ehci, CONFIG_MXC_USB_PORT); + + return 0; +} + +int ehci_hcd_stop(int index) +{ + return 0; +}