X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Fdrivers%2Fsound%2Fsamsung-i2s.c;fp=qemu%2Froms%2Fu-boot%2Fdrivers%2Fsound%2Fsamsung-i2s.c;h=47f155f85d525c15a57e71d0a1d34e60847dfa6a;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/drivers/sound/samsung-i2s.c b/qemu/roms/u-boot/drivers/sound/samsung-i2s.c
new file mode 100644
index 000000000..47f155f85
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/sound/samsung-i2s.c
@@ -0,0 +1,371 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/clk.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch/i2s-regs.h>
+#include <asm/io.h>
+#include <common.h>
+#include <sound.h>
+#include <i2s.h>
+
+#define FIC_TX2COUNT(x)		(((x) >>  24) & 0xf)
+#define FIC_TX1COUNT(x)		(((x) >>  16) & 0xf)
+#define FIC_TXCOUNT(x)		(((x) >>  8) & 0xf)
+#define FIC_RXCOUNT(x)		(((x) >>  0) & 0xf)
+#define FICS_TXCOUNT(x)		(((x) >>  8) & 0x7f)
+
+#define TIMEOUT_I2S_TX		100	/* i2s transfer timeout */
+
+/*
+ * Sets the frame size for I2S LR clock
+ *
+ * @param i2s_reg	i2s regiter address
+ * @param rfs		Frame Size
+ */
+static void i2s_set_lr_framesize(struct i2s_reg *i2s_reg, unsigned int rfs)
+{
+	unsigned int mod = readl(&i2s_reg->mod);
+
+	mod &= ~MOD_RCLK_MASK;
+
+	switch (rfs) {
+	case 768:
+		mod |= MOD_RCLK_768FS;
+		break;
+	case 512:
+		mod |= MOD_RCLK_512FS;
+		break;
+	case 384:
+		mod |= MOD_RCLK_384FS;
+		break;
+	default:
+		mod |= MOD_RCLK_256FS;
+		break;
+	}
+
+	writel(mod, &i2s_reg->mod);
+}
+
+/*
+ * Sets the i2s transfer control
+ *
+ * @param i2s_reg	i2s regiter address
+ * @param on		1 enable tx , 0 disable tx transfer
+ */
+static void i2s_txctrl(struct i2s_reg *i2s_reg, int on)
+{
+	unsigned int con = readl(&i2s_reg->con);
+	unsigned int mod = readl(&i2s_reg->mod) & ~MOD_MASK;
+
+	if (on) {
+		con |= CON_ACTIVE;
+		con &= ~CON_TXCH_PAUSE;
+	} else {
+		con |=  CON_TXCH_PAUSE;
+		con &= ~CON_ACTIVE;
+	}
+
+	writel(mod, &i2s_reg->mod);
+	writel(con, &i2s_reg->con);
+}
+
+/*
+ * set the bit clock frame size (in multiples of LRCLK)
+ *
+ * @param i2s_reg	i2s regiter address
+ * @param bfs		bit Frame Size
+ */
+static void i2s_set_bitclk_framesize(struct i2s_reg *i2s_reg, unsigned bfs)
+{
+	unsigned int mod = readl(&i2s_reg->mod);
+
+	mod &= ~MOD_BCLK_MASK;
+
+	switch (bfs) {
+	case 48:
+		mod |= MOD_BCLK_48FS;
+		break;
+	case 32:
+		mod |= MOD_BCLK_32FS;
+		break;
+	case 24:
+		mod |= MOD_BCLK_24FS;
+		break;
+	case 16:
+		mod |= MOD_BCLK_16FS;
+		break;
+	default:
+		return;
+	}
+	writel(mod, &i2s_reg->mod);
+}
+
+/*
+ * flushes the i2stx fifo
+ *
+ * @param i2s_reg	i2s regiter address
+ * @param flush		Tx fifo flush command (0x00 - do not flush
+ *				0x80 - flush tx fifo)
+ */
+void i2s_fifo(struct i2s_reg *i2s_reg, unsigned int flush)
+{
+	/* Flush the FIFO */
+	setbits_le32(&i2s_reg->fic, flush);
+	clrbits_le32(&i2s_reg->fic, flush);
+}
+
+/*
+ * Set System Clock direction
+ *
+ * @param i2s_reg	i2s regiter address
+ * @param dir		Clock direction
+ *
+ * @return		int value 0 for success, -1 in case of error
+ */
+int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir)
+{
+	unsigned int mod = readl(&i2s_reg->mod);
+
+	if (dir == SND_SOC_CLOCK_IN)
+		mod |= MOD_CDCLKCON;
+	else
+		mod &= ~MOD_CDCLKCON;
+
+	writel(mod, &i2s_reg->mod);
+
+	return 0;
+}
+
+/*
+ * Sets I2S Clcok format
+ *
+ * @param fmt		i2s clock properties
+ * @param i2s_reg	i2s regiter address
+ *
+ * @return		int value 0 for success, -1 in case of error
+ */
+int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt)
+{
+	unsigned int mod = readl(&i2s_reg->mod);
+	unsigned int tmp = 0;
+	unsigned int ret = 0;
+
+	/* Format is priority */
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_RIGHT_J:
+		tmp |= MOD_LR_RLOW;
+		tmp |= MOD_SDF_MSB;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		tmp |= MOD_LR_RLOW;
+		tmp |= MOD_SDF_LSB;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		tmp |= MOD_SDF_IIS;
+		break;
+	default:
+		debug("%s: Invalid format priority [0x%x]\n", __func__,
+		      (fmt & SND_SOC_DAIFMT_FORMAT_MASK));
+		return -1;
+	}
+
+	/*
+	 * INV flag is relative to the FORMAT flag - if set it simply
+	 * flips the polarity specified by the Standard
+	 */
+	switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+	case SND_SOC_DAIFMT_NB_NF:
+		break;
+	case SND_SOC_DAIFMT_NB_IF:
+		if (tmp & MOD_LR_RLOW)
+			tmp &= ~MOD_LR_RLOW;
+		else
+			tmp |= MOD_LR_RLOW;
+		break;
+	default:
+		debug("%s: Invalid clock ploarity input [0x%x]\n", __func__,
+		      (fmt & SND_SOC_DAIFMT_INV_MASK));
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		tmp |= MOD_SLAVE;
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		/* Set default source clock in Master mode */
+		ret = i2s_set_sysclk_dir(i2s_reg, SND_SOC_CLOCK_OUT);
+		if (ret != 0) {
+			debug("%s:set i2s clock direction failed\n", __func__);
+			return -1;
+		}
+		break;
+	default:
+		debug("%s: Invalid master selection [0x%x]\n", __func__,
+		      (fmt & SND_SOC_DAIFMT_MASTER_MASK));
+		return -1;
+	}
+
+	mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE);
+	mod |= tmp;
+	writel(mod, &i2s_reg->mod);
+
+	return 0;
+}
+
+/*
+ * Sets the sample width in bits
+ *
+ * @param blc		samplewidth (size of sample in bits)
+ * @param i2s_reg	i2s regiter address
+ *
+ * @return		int value 0 for success, -1 in case of error
+ */
+int i2s_set_samplesize(struct i2s_reg *i2s_reg, unsigned int blc)
+{
+	unsigned int mod = readl(&i2s_reg->mod);
+
+	mod &= ~MOD_BLCP_MASK;
+	mod &= ~MOD_BLC_MASK;
+
+	switch (blc) {
+	case 8:
+		mod |= MOD_BLCP_8BIT;
+		mod |= MOD_BLC_8BIT;
+		break;
+	case 16:
+		mod |= MOD_BLCP_16BIT;
+		mod |= MOD_BLC_16BIT;
+		break;
+	case 24:
+		mod |= MOD_BLCP_24BIT;
+		mod |= MOD_BLC_24BIT;
+		break;
+	default:
+		debug("%s: Invalid sample size input [0x%x]\n",
+		      __func__, blc);
+		return -1;
+	}
+	writel(mod, &i2s_reg->mod);
+
+	return 0;
+}
+
+int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned int *data,
+				unsigned long data_size)
+{
+	int i;
+	int start;
+	struct i2s_reg *i2s_reg =
+				(struct i2s_reg *)pi2s_tx->base_address;
+
+	if (data_size < FIFO_LENGTH) {
+		debug("%s : Invalid data size\n", __func__);
+		return -1; /* invalid pcm data size */
+	}
+
+	/* fill the tx buffer before stating the tx transmit */
+	for (i = 0; i < FIFO_LENGTH; i++)
+		writel(*data++, &i2s_reg->txd);
+
+	data_size -= FIFO_LENGTH;
+	i2s_txctrl(i2s_reg, I2S_TX_ON);
+
+	while (data_size > 0) {
+		start = get_timer(0);
+		if (!(CON_TXFIFO_FULL & (readl(&i2s_reg->con)))) {
+			writel(*data++, &i2s_reg->txd);
+			data_size--;
+		} else {
+			if (get_timer(start) > TIMEOUT_I2S_TX) {
+				i2s_txctrl(i2s_reg, I2S_TX_OFF);
+				debug("%s: I2S Transfer Timeout\n", __func__);
+				return -1;
+			}
+		}
+	}
+	i2s_txctrl(i2s_reg, I2S_TX_OFF);
+
+	return 0;
+}
+
+int i2s_tx_init(struct i2stx_info *pi2s_tx)
+{
+	int ret;
+	struct i2s_reg *i2s_reg =
+				(struct i2s_reg *)pi2s_tx->base_address;
+	if (pi2s_tx->id == 0) {
+		/* Initialize GPIO for I2S-0 */
+		exynos_pinmux_config(PERIPH_ID_I2S0, 0);
+
+		/* Set EPLL Clock */
+		ret = set_epll_clk(pi2s_tx->samplingrate * pi2s_tx->rfs * 4);
+	} else if (pi2s_tx->id == 1) {
+		/* Initialize GPIO for I2S-1 */
+		exynos_pinmux_config(PERIPH_ID_I2S1, 0);
+
+		/* Set EPLL Clock */
+		ret = set_epll_clk(pi2s_tx->audio_pll_clk);
+	} else {
+		debug("%s: unsupported i2s-%d bus\n", __func__, pi2s_tx->id);
+		return -1;
+	}
+
+	if (ret != 0) {
+		debug("%s: epll clock set rate failed\n", __func__);
+		return -1;
+	}
+
+	/* Select Clk Source for Audio 0 or 1 */
+	ret = set_i2s_clk_source(pi2s_tx->id);
+	if (ret == -1) {
+		debug("%s: unsupported clock for i2s-%d\n", __func__,
+		      pi2s_tx->id);
+		return -1;
+	}
+
+	if (pi2s_tx->id == 0) {
+		/*Reset the i2s module */
+		writel(CON_RESET, &i2s_reg->con);
+
+		writel(MOD_OP_CLK | MOD_RCLKSRC, &i2s_reg->mod);
+		/* set i2s prescaler */
+		writel(PSREN | PSVAL, &i2s_reg->psr);
+	} else {
+		/* Set Prescaler to get MCLK */
+		ret = set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk,
+				(pi2s_tx->samplingrate * (pi2s_tx->rfs)),
+				pi2s_tx->id);
+	}
+	if (ret == -1) {
+		debug("%s: unsupported prescalar for i2s-%d\n", __func__,
+		      pi2s_tx->id);
+		return -1;
+	}
+
+	/* Configure I2s format */
+	ret = i2s_set_fmt(i2s_reg, (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+			  SND_SOC_DAIFMT_CBM_CFM));
+	if (ret == 0) {
+		i2s_set_lr_framesize(i2s_reg, pi2s_tx->rfs);
+		ret = i2s_set_samplesize(i2s_reg, pi2s_tx->bitspersample);
+		if (ret != 0) {
+			debug("%s:set sample rate failed\n", __func__);
+			return -1;
+		}
+
+		i2s_set_bitclk_framesize(i2s_reg, pi2s_tx->bfs);
+		/* disable i2s transfer flag and flush the fifo */
+		i2s_txctrl(i2s_reg, I2S_TX_OFF);
+		i2s_fifo(i2s_reg, FIC_TXFLUSH);
+	} else {
+		debug("%s: failed\n", __func__);
+	}
+
+	return ret;
+}