X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Fdrivers%2Fserial%2Fns16550.c;fp=qemu%2Froms%2Fu-boot%2Fdrivers%2Fserial%2Fns16550.c;h=f26979dbe15e4ecf510b746dc4c92e58447ee2d5;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/drivers/serial/ns16550.c b/qemu/roms/u-boot/drivers/serial/ns16550.c
new file mode 100644
index 000000000..f26979dbe
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/serial/ns16550.c
@@ -0,0 +1,147 @@
+/*
+ * COM1 NS16550 support
+ * originally from linux source (arch/powerpc/boot/ns16550.c)
+ * modified to use CONFIG_SYS_ISA_MEM and new defines
+ */
+
+#include <config.h>
+#include <ns16550.h>
+#include <watchdog.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+#define UART_LCRVAL UART_LCR_8N1		/* 8 data, 1 stop, no parity */
+#define UART_MCRVAL (UART_MCR_DTR | \
+		     UART_MCR_RTS)		/* RTS/DTR */
+#define UART_FCRVAL (UART_FCR_FIFO_EN |	\
+		     UART_FCR_RXSR |	\
+		     UART_FCR_TXSR)		/* Clear & enable FIFOs */
+#ifdef CONFIG_SYS_NS16550_PORT_MAPPED
+#define serial_out(x, y)	outb(x, (ulong)y)
+#define serial_in(y)		inb((ulong)y)
+#elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE > 0)
+#define serial_out(x, y)	out_be32(y, x)
+#define serial_in(y)		in_be32(y)
+#elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE < 0)
+#define serial_out(x, y)	out_le32(y, x)
+#define serial_in(y)		in_le32(y)
+#else
+#define serial_out(x, y)	writeb(x, y)
+#define serial_in(y)		readb(y)
+#endif
+
+#if defined(CONFIG_K2HK_EVM)
+#define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE   0
+#define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0))
+#undef UART_MCRVAL
+#ifdef CONFIG_SERIAL_HW_FLOW_CONTROL
+#define UART_MCRVAL             (UART_MCR_RTS | UART_MCR_AFE)
+#else
+#define UART_MCRVAL             (UART_MCR_RTS)
+#endif
+#endif
+
+#ifndef CONFIG_SYS_NS16550_IER
+#define CONFIG_SYS_NS16550_IER  0x00
+#endif /* CONFIG_SYS_NS16550_IER */
+
+void NS16550_init(NS16550_t com_port, int baud_divisor)
+{
+#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX))
+	/*
+	 * On some OMAP3 devices when UART3 is configured for boot mode before
+	 * SPL starts only THRE bit is set. We have to empty the transmitter
+	 * before initialization starts.
+	 */
+	if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE))
+	     == UART_LSR_THRE) {
+		serial_out(UART_LCR_DLAB, &com_port->lcr);
+		serial_out(baud_divisor & 0xff, &com_port->dll);
+		serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
+		serial_out(UART_LCRVAL, &com_port->lcr);
+		serial_out(0, &com_port->mdr1);
+	}
+#endif
+
+	while (!(serial_in(&com_port->lsr) & UART_LSR_TEMT))
+		;
+
+	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
+#if defined(CONFIG_OMAP) || defined(CONFIG_AM33XX) || \
+			defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
+	serial_out(0x7, &com_port->mdr1);	/* mode select reset TL16C750*/
+#endif
+	serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
+	serial_out(0, &com_port->dll);
+	serial_out(0, &com_port->dlm);
+	serial_out(UART_LCRVAL, &com_port->lcr);
+	serial_out(UART_MCRVAL, &com_port->mcr);
+	serial_out(UART_FCRVAL, &com_port->fcr);
+	serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
+	serial_out(baud_divisor & 0xff, &com_port->dll);
+	serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
+	serial_out(UART_LCRVAL, &com_port->lcr);
+#if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
+	defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
+	defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
+
+	/* /16 is proper to hit 115200 with 48MHz */
+	serial_out(0, &com_port->mdr1);
+#endif /* CONFIG_OMAP */
+#if defined(CONFIG_K2HK_EVM)
+	serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC);
+#endif
+}
+
+#ifndef CONFIG_NS16550_MIN_FUNCTIONS
+void NS16550_reinit(NS16550_t com_port, int baud_divisor)
+{
+	serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
+	serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
+	serial_out(0, &com_port->dll);
+	serial_out(0, &com_port->dlm);
+	serial_out(UART_LCRVAL, &com_port->lcr);
+	serial_out(UART_MCRVAL, &com_port->mcr);
+	serial_out(UART_FCRVAL, &com_port->fcr);
+	serial_out(UART_LCR_BKSE, &com_port->lcr);
+	serial_out(baud_divisor & 0xff, &com_port->dll);
+	serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
+	serial_out(UART_LCRVAL, &com_port->lcr);
+}
+#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
+
+void NS16550_putc(NS16550_t com_port, char c)
+{
+	while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0)
+		;
+	serial_out(c, &com_port->thr);
+
+	/*
+	 * Call watchdog_reset() upon newline. This is done here in putc
+	 * since the environment code uses a single puts() to print the complete
+	 * environment upon "printenv". So we can't put this watchdog call
+	 * in puts().
+	 */
+	if (c == '\n')
+		WATCHDOG_RESET();
+}
+
+#ifndef CONFIG_NS16550_MIN_FUNCTIONS
+char NS16550_getc(NS16550_t com_port)
+{
+	while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) {
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_TTY)
+		extern void usbtty_poll(void);
+		usbtty_poll();
+#endif
+		WATCHDOG_RESET();
+	}
+	return serial_in(&com_port->rbr);
+}
+
+int NS16550_tstc(NS16550_t com_port)
+{
+	return (serial_in(&com_port->lsr) & UART_LSR_DR) != 0;
+}
+
+#endif /* CONFIG_NS16550_MIN_FUNCTIONS */