X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Fdrivers%2Frtc%2Fpl031.c;fp=qemu%2Froms%2Fu-boot%2Fdrivers%2Frtc%2Fpl031.c;h=c4d1259a898d2e885eea0d76a6f16ad1c07e7434;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/roms/u-boot/drivers/rtc/pl031.c b/qemu/roms/u-boot/drivers/rtc/pl031.c new file mode 100644 index 000000000..c4d1259a8 --- /dev/null +++ b/qemu/roms/u-boot/drivers/rtc/pl031.c @@ -0,0 +1,109 @@ +/* + * (C) Copyright 2008 + * Gururaja Hebbar gururajakr@sanyo.co.in + * + * reference linux-2.6.20.6/drivers/rtc/rtc-pl031.c + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#if defined(CONFIG_CMD_DATE) + +#ifndef CONFIG_SYS_RTC_PL031_BASE +#error CONFIG_SYS_RTC_PL031_BASE is not defined! +#endif + +/* + * Register definitions + */ +#define RTC_DR 0x00 /* Data read register */ +#define RTC_MR 0x04 /* Match register */ +#define RTC_LR 0x08 /* Data load register */ +#define RTC_CR 0x0c /* Control register */ +#define RTC_IMSC 0x10 /* Interrupt mask and set register */ +#define RTC_RIS 0x14 /* Raw interrupt status register */ +#define RTC_MIS 0x18 /* Masked interrupt status register */ +#define RTC_ICR 0x1c /* Interrupt clear register */ + +#define RTC_CR_START (1 << 0) + +#define RTC_WRITE_REG(addr, val) \ + (*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr)) = (val)) +#define RTC_READ_REG(addr) \ + (*(volatile unsigned int *)(CONFIG_SYS_RTC_PL031_BASE + (addr))) + +static int pl031_initted = 0; + +/* Enable RTC Start in Control register*/ +void rtc_init(void) +{ + RTC_WRITE_REG(RTC_CR, RTC_CR_START); + + pl031_initted = 1; +} + +/* + * Reset the RTC. We set the date back to 1970-01-01. + */ +void rtc_reset(void) +{ + RTC_WRITE_REG(RTC_LR, 0x00); + if(!pl031_initted) + rtc_init(); +} + +/* + * Set the RTC +*/ +int rtc_set(struct rtc_time *tmp) +{ + unsigned long tim; + + if(!pl031_initted) + rtc_init(); + + if (tmp == NULL) { + puts("Error setting the date/time\n"); + return -1; + } + + /* Calculate number of seconds this incoming time represents */ + tim = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); + + RTC_WRITE_REG(RTC_LR, tim); + + return -1; +} + +/* + * Get the current time from the RTC + */ +int rtc_get(struct rtc_time *tmp) +{ + ulong tim; + + if(!pl031_initted) + rtc_init(); + + if (tmp == NULL) { + puts("Error getting the date/time\n"); + return -1; + } + + tim = RTC_READ_REG(RTC_DR); + + to_tm (tim, tmp); + + debug ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); + + return 0; +} + +#endif