X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Fdrivers%2Fnet%2Fsh_eth.c;fp=qemu%2Froms%2Fu-boot%2Fdrivers%2Fnet%2Fsh_eth.c;h=5e132f2b5374f1e959e800de7bd156cc2518f9c5;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/drivers/net/sh_eth.c b/qemu/roms/u-boot/drivers/net/sh_eth.c
new file mode 100644
index 000000000..5e132f2b5
--- /dev/null
+++ b/qemu/roms/u-boot/drivers/net/sh_eth.c
@@ -0,0 +1,655 @@
+/*
+ * sh_eth.c - Driver for Renesas ethernet controler.
+ *
+ * Copyright (C) 2008, 2011 Renesas Solutions Corp.
+ * Copyright (c) 2008, 2011 Nobuhiro Iwamatsu
+ * Copyright (c) 2007 Carlos Munoz <carlos@kenati.com>
+ * Copyright (C) 2013  Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <net.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+
+#include "sh_eth.h"
+
+#ifndef CONFIG_SH_ETHER_USE_PORT
+# error "Please define CONFIG_SH_ETHER_USE_PORT"
+#endif
+#ifndef CONFIG_SH_ETHER_PHY_ADDR
+# error "Please define CONFIG_SH_ETHER_PHY_ADDR"
+#endif
+
+#if defined(CONFIG_SH_ETHER_CACHE_WRITEBACK) && !defined(CONFIG_SYS_DCACHE_OFF)
+#define flush_cache_wback(addr, len)    \
+		flush_dcache_range((u32)addr, (u32)(addr + len - 1))
+#else
+#define flush_cache_wback(...)
+#endif
+
+#if defined(CONFIG_SH_ETHER_CACHE_INVALIDATE) && defined(CONFIG_ARM)
+#define invalidate_cache(addr, len)		\
+	{	\
+		u32 line_size = CONFIG_SH_ETHER_ALIGNE_SIZE;	\
+		u32 start, end;	\
+		\
+		start = (u32)addr;	\
+		end = start + len;	\
+		start &= ~(line_size - 1);	\
+		end = ((end + line_size - 1) & ~(line_size - 1));	\
+		\
+		invalidate_dcache_range(start, end);	\
+	}
+#else
+#define invalidate_cache(...)
+#endif
+
+#define TIMEOUT_CNT 1000
+
+int sh_eth_send(struct eth_device *dev, void *packet, int len)
+{
+	struct sh_eth_dev *eth = dev->priv;
+	int port = eth->port, ret = 0, timeout;
+	struct sh_eth_info *port_info = &eth->port_info[port];
+
+	if (!packet || len > 0xffff) {
+		printf(SHETHER_NAME ": %s: Invalid argument\n", __func__);
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* packet must be a 4 byte boundary */
+	if ((int)packet & 3) {
+		printf(SHETHER_NAME ": %s: packet not 4 byte alligned\n", __func__);
+		ret = -EFAULT;
+		goto err;
+	}
+
+	/* Update tx descriptor */
+	flush_cache_wback(packet, len);
+	port_info->tx_desc_cur->td2 = ADDR_TO_PHY(packet);
+	port_info->tx_desc_cur->td1 = len << 16;
+	/* Must preserve the end of descriptor list indication */
+	if (port_info->tx_desc_cur->td0 & TD_TDLE)
+		port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP | TD_TDLE;
+	else
+		port_info->tx_desc_cur->td0 = TD_TACT | TD_TFP;
+
+	/* Restart the transmitter if disabled */
+	if (!(sh_eth_read(eth, EDTRR) & EDTRR_TRNS))
+		sh_eth_write(eth, EDTRR_TRNS, EDTRR);
+
+	/* Wait until packet is transmitted */
+	timeout = TIMEOUT_CNT;
+	do {
+		invalidate_cache(port_info->tx_desc_cur,
+				 sizeof(struct tx_desc_s));
+		udelay(100);
+	} while (port_info->tx_desc_cur->td0 & TD_TACT && timeout--);
+
+	if (timeout < 0) {
+		printf(SHETHER_NAME ": transmit timeout\n");
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	port_info->tx_desc_cur++;
+	if (port_info->tx_desc_cur >= port_info->tx_desc_base + NUM_TX_DESC)
+		port_info->tx_desc_cur = port_info->tx_desc_base;
+
+err:
+	return ret;
+}
+
+int sh_eth_recv(struct eth_device *dev)
+{
+	struct sh_eth_dev *eth = dev->priv;
+	int port = eth->port, len = 0;
+	struct sh_eth_info *port_info = &eth->port_info[port];
+	uchar *packet;
+
+	/* Check if the rx descriptor is ready */
+	invalidate_cache(port_info->rx_desc_cur, sizeof(struct rx_desc_s));
+	if (!(port_info->rx_desc_cur->rd0 & RD_RACT)) {
+		/* Check for errors */
+		if (!(port_info->rx_desc_cur->rd0 & RD_RFE)) {
+			len = port_info->rx_desc_cur->rd1 & 0xffff;
+			packet = (uchar *)
+				ADDR_TO_P2(port_info->rx_desc_cur->rd2);
+			invalidate_cache(packet, len);
+			NetReceive(packet, len);
+		}
+
+		/* Make current descriptor available again */
+		if (port_info->rx_desc_cur->rd0 & RD_RDLE)
+			port_info->rx_desc_cur->rd0 = RD_RACT | RD_RDLE;
+		else
+			port_info->rx_desc_cur->rd0 = RD_RACT;
+		/* Point to the next descriptor */
+		port_info->rx_desc_cur++;
+		if (port_info->rx_desc_cur >=
+		    port_info->rx_desc_base + NUM_RX_DESC)
+			port_info->rx_desc_cur = port_info->rx_desc_base;
+	}
+
+	/* Restart the receiver if disabled */
+	if (!(sh_eth_read(eth, EDRRR) & EDRRR_R))
+		sh_eth_write(eth, EDRRR_R, EDRRR);
+
+	return len;
+}
+
+static int sh_eth_reset(struct sh_eth_dev *eth)
+{
+#if defined(SH_ETH_TYPE_GETHER)
+	int ret = 0, i;
+
+	/* Start e-dmac transmitter and receiver */
+	sh_eth_write(eth, EDSR_ENALL, EDSR);
+
+	/* Perform a software reset and wait for it to complete */
+	sh_eth_write(eth, EDMR_SRST, EDMR);
+	for (i = 0; i < TIMEOUT_CNT ; i++) {
+		if (!(sh_eth_read(eth, EDMR) & EDMR_SRST))
+			break;
+		udelay(1000);
+	}
+
+	if (i == TIMEOUT_CNT) {
+		printf(SHETHER_NAME  ": Software reset timeout\n");
+		ret = -EIO;
+	}
+
+	return ret;
+#else
+	sh_eth_write(eth, sh_eth_read(eth, EDMR) | EDMR_SRST, EDMR);
+	udelay(3000);
+	sh_eth_write(eth, sh_eth_read(eth, EDMR) & ~EDMR_SRST, EDMR);
+
+	return 0;
+#endif
+}
+
+static int sh_eth_tx_desc_init(struct sh_eth_dev *eth)
+{
+	int port = eth->port, i, ret = 0;
+	u32 tmp_addr;
+	struct sh_eth_info *port_info = &eth->port_info[port];
+	struct tx_desc_s *cur_tx_desc;
+
+	/*
+	 * Allocate tx descriptors. They must be TX_DESC_SIZE bytes aligned
+	 */
+	port_info->tx_desc_malloc = malloc(NUM_TX_DESC *
+						 sizeof(struct tx_desc_s) +
+						 TX_DESC_SIZE - 1);
+	if (!port_info->tx_desc_malloc) {
+		printf(SHETHER_NAME ": malloc failed\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	tmp_addr = (u32) (((int)port_info->tx_desc_malloc + TX_DESC_SIZE - 1) &
+			  ~(TX_DESC_SIZE - 1));
+	flush_cache_wback(tmp_addr, NUM_TX_DESC * sizeof(struct tx_desc_s));
+	/* Make sure we use a P2 address (non-cacheable) */
+	port_info->tx_desc_base = (struct tx_desc_s *)ADDR_TO_P2(tmp_addr);
+	port_info->tx_desc_cur = port_info->tx_desc_base;
+
+	/* Initialize all descriptors */
+	for (cur_tx_desc = port_info->tx_desc_base, i = 0; i < NUM_TX_DESC;
+	     cur_tx_desc++, i++) {
+		cur_tx_desc->td0 = 0x00;
+		cur_tx_desc->td1 = 0x00;
+		cur_tx_desc->td2 = 0x00;
+	}
+
+	/* Mark the end of the descriptors */
+	cur_tx_desc--;
+	cur_tx_desc->td0 |= TD_TDLE;
+
+	/* Point the controller to the tx descriptor list. Must use physical
+	   addresses */
+	sh_eth_write(eth, ADDR_TO_PHY(port_info->tx_desc_base), TDLAR);
+#if defined(SH_ETH_TYPE_GETHER)
+	sh_eth_write(eth, ADDR_TO_PHY(port_info->tx_desc_base), TDFAR);
+	sh_eth_write(eth, ADDR_TO_PHY(cur_tx_desc), TDFXR);
+	sh_eth_write(eth, 0x01, TDFFR);/* Last discriptor bit */
+#endif
+
+err:
+	return ret;
+}
+
+static int sh_eth_rx_desc_init(struct sh_eth_dev *eth)
+{
+	int port = eth->port, i , ret = 0;
+	struct sh_eth_info *port_info = &eth->port_info[port];
+	struct rx_desc_s *cur_rx_desc;
+	u32 tmp_addr;
+	u8 *rx_buf;
+
+	/*
+	 * Allocate rx descriptors. They must be RX_DESC_SIZE bytes aligned
+	 */
+	port_info->rx_desc_malloc = malloc(NUM_RX_DESC *
+						 sizeof(struct rx_desc_s) +
+						 RX_DESC_SIZE - 1);
+	if (!port_info->rx_desc_malloc) {
+		printf(SHETHER_NAME ": malloc failed\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	tmp_addr = (u32) (((int)port_info->rx_desc_malloc + RX_DESC_SIZE - 1) &
+			  ~(RX_DESC_SIZE - 1));
+	flush_cache_wback(tmp_addr, NUM_RX_DESC * sizeof(struct rx_desc_s));
+	/* Make sure we use a P2 address (non-cacheable) */
+	port_info->rx_desc_base = (struct rx_desc_s *)ADDR_TO_P2(tmp_addr);
+
+	port_info->rx_desc_cur = port_info->rx_desc_base;
+
+	/*
+	 * Allocate rx data buffers. They must be 32 bytes aligned  and in
+	 * P2 area
+	 */
+	port_info->rx_buf_malloc = malloc(
+		NUM_RX_DESC * MAX_BUF_SIZE + RX_BUF_ALIGNE_SIZE - 1);
+	if (!port_info->rx_buf_malloc) {
+		printf(SHETHER_NAME ": malloc failed\n");
+		ret = -ENOMEM;
+		goto err_buf_malloc;
+	}
+
+	tmp_addr = (u32)(((int)port_info->rx_buf_malloc
+			  + (RX_BUF_ALIGNE_SIZE - 1)) &
+			  ~(RX_BUF_ALIGNE_SIZE - 1));
+	port_info->rx_buf_base = (u8 *)ADDR_TO_P2(tmp_addr);
+
+	/* Initialize all descriptors */
+	for (cur_rx_desc = port_info->rx_desc_base,
+	     rx_buf = port_info->rx_buf_base, i = 0;
+	     i < NUM_RX_DESC; cur_rx_desc++, rx_buf += MAX_BUF_SIZE, i++) {
+		cur_rx_desc->rd0 = RD_RACT;
+		cur_rx_desc->rd1 = MAX_BUF_SIZE << 16;
+		cur_rx_desc->rd2 = (u32) ADDR_TO_PHY(rx_buf);
+	}
+
+	/* Mark the end of the descriptors */
+	cur_rx_desc--;
+	cur_rx_desc->rd0 |= RD_RDLE;
+
+	/* Point the controller to the rx descriptor list */
+	sh_eth_write(eth, ADDR_TO_PHY(port_info->rx_desc_base), RDLAR);
+#if defined(SH_ETH_TYPE_GETHER)
+	sh_eth_write(eth, ADDR_TO_PHY(port_info->rx_desc_base), RDFAR);
+	sh_eth_write(eth, ADDR_TO_PHY(cur_rx_desc), RDFXR);
+	sh_eth_write(eth, RDFFR_RDLF, RDFFR);
+#endif
+
+	return ret;
+
+err_buf_malloc:
+	free(port_info->rx_desc_malloc);
+	port_info->rx_desc_malloc = NULL;
+
+err:
+	return ret;
+}
+
+static void sh_eth_tx_desc_free(struct sh_eth_dev *eth)
+{
+	int port = eth->port;
+	struct sh_eth_info *port_info = &eth->port_info[port];
+
+	if (port_info->tx_desc_malloc) {
+		free(port_info->tx_desc_malloc);
+		port_info->tx_desc_malloc = NULL;
+	}
+}
+
+static void sh_eth_rx_desc_free(struct sh_eth_dev *eth)
+{
+	int port = eth->port;
+	struct sh_eth_info *port_info = &eth->port_info[port];
+
+	if (port_info->rx_desc_malloc) {
+		free(port_info->rx_desc_malloc);
+		port_info->rx_desc_malloc = NULL;
+	}
+
+	if (port_info->rx_buf_malloc) {
+		free(port_info->rx_buf_malloc);
+		port_info->rx_buf_malloc = NULL;
+	}
+}
+
+static int sh_eth_desc_init(struct sh_eth_dev *eth)
+{
+	int ret = 0;
+
+	ret = sh_eth_tx_desc_init(eth);
+	if (ret)
+		goto err_tx_init;
+
+	ret = sh_eth_rx_desc_init(eth);
+	if (ret)
+		goto err_rx_init;
+
+	return ret;
+err_rx_init:
+	sh_eth_tx_desc_free(eth);
+
+err_tx_init:
+	return ret;
+}
+
+static int sh_eth_phy_config(struct sh_eth_dev *eth)
+{
+	int port = eth->port, ret = 0;
+	struct sh_eth_info *port_info = &eth->port_info[port];
+	struct eth_device *dev = port_info->dev;
+	struct phy_device *phydev;
+
+	phydev = phy_connect(
+			miiphy_get_dev_by_name(dev->name),
+			port_info->phy_addr, dev, CONFIG_SH_ETHER_PHY_MODE);
+	port_info->phydev = phydev;
+	phy_config(phydev);
+
+	return ret;
+}
+
+static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd)
+{
+	int port = eth->port, ret = 0;
+	u32 val;
+	struct sh_eth_info *port_info = &eth->port_info[port];
+	struct eth_device *dev = port_info->dev;
+	struct phy_device *phy;
+
+	/* Configure e-dmac registers */
+	sh_eth_write(eth, (sh_eth_read(eth, EDMR) & ~EMDR_DESC_R) |
+			(EMDR_DESC | EDMR_EL), EDMR);
+
+	sh_eth_write(eth, 0, EESIPR);
+	sh_eth_write(eth, 0, TRSCER);
+	sh_eth_write(eth, 0, TFTR);
+	sh_eth_write(eth, (FIFO_SIZE_T | FIFO_SIZE_R), FDR);
+	sh_eth_write(eth, RMCR_RST, RMCR);
+#if defined(SH_ETH_TYPE_GETHER)
+	sh_eth_write(eth, 0, RPADIR);
+#endif
+	sh_eth_write(eth, (FIFO_F_D_RFF | FIFO_F_D_RFD), FCFTR);
+
+	/* Configure e-mac registers */
+	sh_eth_write(eth, 0, ECSIPR);
+
+	/* Set Mac address */
+	val = dev->enetaddr[0] << 24 | dev->enetaddr[1] << 16 |
+	    dev->enetaddr[2] << 8 | dev->enetaddr[3];
+	sh_eth_write(eth, val, MAHR);
+
+	val = dev->enetaddr[4] << 8 | dev->enetaddr[5];
+	sh_eth_write(eth, val, MALR);
+
+	sh_eth_write(eth, RFLR_RFL_MIN, RFLR);
+#if defined(SH_ETH_TYPE_GETHER)
+	sh_eth_write(eth, 0, PIPR);
+	sh_eth_write(eth, APR_AP, APR);
+	sh_eth_write(eth, MPR_MP, MPR);
+	sh_eth_write(eth, TPAUSER_TPAUSE, TPAUSER);
+#endif
+
+#if defined(CONFIG_CPU_SH7734) || defined(CONFIG_R8A7740)
+	sh_eth_write(eth, CONFIG_SH_ETHER_SH7734_MII, RMII_MII);
+#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791)
+	sh_eth_write(eth, sh_eth_read(eth, RMIIMR) | 0x1, RMIIMR);
+#endif
+	/* Configure phy */
+	ret = sh_eth_phy_config(eth);
+	if (ret) {
+		printf(SHETHER_NAME ": phy config timeout\n");
+		goto err_phy_cfg;
+	}
+	phy = port_info->phydev;
+	ret = phy_startup(phy);
+	if (ret) {
+		printf(SHETHER_NAME ": phy startup failure\n");
+		return ret;
+	}
+
+	val = 0;
+
+	/* Set the transfer speed */
+	if (phy->speed == 100) {
+		printf(SHETHER_NAME ": 100Base/");
+#if defined(SH_ETH_TYPE_GETHER)
+		sh_eth_write(eth, GECMR_100B, GECMR);
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
+		sh_eth_write(eth, 1, RTRATE);
+#elif defined(CONFIG_CPU_SH7724) || defined(CONFIG_R8A7790) || \
+		defined(CONFIG_R8A7791)
+		val = ECMR_RTM;
+#endif
+	} else if (phy->speed == 10) {
+		printf(SHETHER_NAME ": 10Base/");
+#if defined(SH_ETH_TYPE_GETHER)
+		sh_eth_write(eth, GECMR_10B, GECMR);
+#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752)
+		sh_eth_write(eth, 0, RTRATE);
+#endif
+	}
+#if defined(SH_ETH_TYPE_GETHER)
+	else if (phy->speed == 1000) {
+		printf(SHETHER_NAME ": 1000Base/");
+		sh_eth_write(eth, GECMR_1000B, GECMR);
+	}
+#endif
+
+	/* Check if full duplex mode is supported by the phy */
+	if (phy->duplex) {
+		printf("Full\n");
+		sh_eth_write(eth, val | (ECMR_CHG_DM|ECMR_RE|ECMR_TE|ECMR_DM),
+			     ECMR);
+	} else {
+		printf("Half\n");
+		sh_eth_write(eth, val | (ECMR_CHG_DM|ECMR_RE|ECMR_TE), ECMR);
+	}
+
+	return ret;
+
+err_phy_cfg:
+	return ret;
+}
+
+static void sh_eth_start(struct sh_eth_dev *eth)
+{
+	/*
+	 * Enable the e-dmac receiver only. The transmitter will be enabled when
+	 * we have something to transmit
+	 */
+	sh_eth_write(eth, EDRRR_R, EDRRR);
+}
+
+static void sh_eth_stop(struct sh_eth_dev *eth)
+{
+	sh_eth_write(eth, ~EDRRR_R, EDRRR);
+}
+
+int sh_eth_init(struct eth_device *dev, bd_t *bd)
+{
+	int ret = 0;
+	struct sh_eth_dev *eth = dev->priv;
+
+	ret = sh_eth_reset(eth);
+	if (ret)
+		goto err;
+
+	ret = sh_eth_desc_init(eth);
+	if (ret)
+		goto err;
+
+	ret = sh_eth_config(eth, bd);
+	if (ret)
+		goto err_config;
+
+	sh_eth_start(eth);
+
+	return ret;
+
+err_config:
+	sh_eth_tx_desc_free(eth);
+	sh_eth_rx_desc_free(eth);
+
+err:
+	return ret;
+}
+
+void sh_eth_halt(struct eth_device *dev)
+{
+	struct sh_eth_dev *eth = dev->priv;
+	sh_eth_stop(eth);
+}
+
+int sh_eth_initialize(bd_t *bd)
+{
+    int ret = 0;
+	struct sh_eth_dev *eth = NULL;
+    struct eth_device *dev = NULL;
+
+    eth = (struct sh_eth_dev *)malloc(sizeof(struct sh_eth_dev));
+	if (!eth) {
+		printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
+		ret = -ENOMEM;
+		goto err;
+	}
+
+    dev = (struct eth_device *)malloc(sizeof(struct eth_device));
+	if (!dev) {
+		printf(SHETHER_NAME ": %s: malloc failed\n", __func__);
+		ret = -ENOMEM;
+		goto err;
+	}
+    memset(dev, 0, sizeof(struct eth_device));
+    memset(eth, 0, sizeof(struct sh_eth_dev));
+
+	eth->port = CONFIG_SH_ETHER_USE_PORT;
+	eth->port_info[eth->port].phy_addr = CONFIG_SH_ETHER_PHY_ADDR;
+
+    dev->priv = (void *)eth;
+    dev->iobase = 0;
+    dev->init = sh_eth_init;
+    dev->halt = sh_eth_halt;
+    dev->send = sh_eth_send;
+    dev->recv = sh_eth_recv;
+    eth->port_info[eth->port].dev = dev;
+
+	sprintf(dev->name, SHETHER_NAME);
+
+    /* Register Device to EtherNet subsystem  */
+    eth_register(dev);
+
+	bb_miiphy_buses[0].priv = eth;
+	miiphy_register(dev->name, bb_miiphy_read, bb_miiphy_write);
+
+	if (!eth_getenv_enetaddr("ethaddr", dev->enetaddr))
+		puts("Please set MAC address\n");
+
+	return ret;
+
+err:
+	if (dev)
+		free(dev);
+
+	if (eth)
+		free(eth);
+
+	printf(SHETHER_NAME ": Failed\n");
+	return ret;
+}
+
+/******* for bb_miiphy *******/
+static int sh_eth_bb_init(struct bb_miiphy_bus *bus)
+{
+	return 0;
+}
+
+static int sh_eth_bb_mdio_active(struct bb_miiphy_bus *bus)
+{
+	struct sh_eth_dev *eth = bus->priv;
+
+	sh_eth_write(eth, sh_eth_read(eth, PIR) | PIR_MMD, PIR);
+
+	return 0;
+}
+
+static int sh_eth_bb_mdio_tristate(struct bb_miiphy_bus *bus)
+{
+	struct sh_eth_dev *eth = bus->priv;
+
+	sh_eth_write(eth, sh_eth_read(eth, PIR) & ~PIR_MMD, PIR);
+
+	return 0;
+}
+
+static int sh_eth_bb_set_mdio(struct bb_miiphy_bus *bus, int v)
+{
+	struct sh_eth_dev *eth = bus->priv;
+
+	if (v)
+		sh_eth_write(eth, sh_eth_read(eth, PIR) | PIR_MDO, PIR);
+	else
+		sh_eth_write(eth, sh_eth_read(eth, PIR) & ~PIR_MDO, PIR);
+
+	return 0;
+}
+
+static int sh_eth_bb_get_mdio(struct bb_miiphy_bus *bus, int *v)
+{
+	struct sh_eth_dev *eth = bus->priv;
+
+	*v = (sh_eth_read(eth, PIR) & PIR_MDI) >> 3;
+
+	return 0;
+}
+
+static int sh_eth_bb_set_mdc(struct bb_miiphy_bus *bus, int v)
+{
+	struct sh_eth_dev *eth = bus->priv;
+
+	if (v)
+		sh_eth_write(eth, sh_eth_read(eth, PIR) | PIR_MDC, PIR);
+	else
+		sh_eth_write(eth, sh_eth_read(eth, PIR) & ~PIR_MDC, PIR);
+
+	return 0;
+}
+
+static int sh_eth_bb_delay(struct bb_miiphy_bus *bus)
+{
+	udelay(10);
+
+	return 0;
+}
+
+struct bb_miiphy_bus bb_miiphy_buses[] = {
+	{
+		.name		= "sh_eth",
+		.init		= sh_eth_bb_init,
+		.mdio_active	= sh_eth_bb_mdio_active,
+		.mdio_tristate	= sh_eth_bb_mdio_tristate,
+		.set_mdio	= sh_eth_bb_set_mdio,
+		.get_mdio	= sh_eth_bb_get_mdio,
+		.set_mdc	= sh_eth_bb_set_mdc,
+		.delay		= sh_eth_bb_delay,
+	}
+};
+int bb_miiphy_buses_num = ARRAY_SIZE(bb_miiphy_buses);