X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Fdrivers%2Fnet%2Fphy%2Fmiiphybb.c;fp=qemu%2Froms%2Fu-boot%2Fdrivers%2Fnet%2Fphy%2Fmiiphybb.c;h=5cda0b84692b9a7203fd493d424b6f18fd69cfc5;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/roms/u-boot/drivers/net/phy/miiphybb.c b/qemu/roms/u-boot/drivers/net/phy/miiphybb.c new file mode 100644 index 000000000..5cda0b846 --- /dev/null +++ b/qemu/roms/u-boot/drivers/net/phy/miiphybb.c @@ -0,0 +1,364 @@ +/* + * (C) Copyright 2009 Industrie Dial Face S.p.A. + * Luigi 'Comio' Mantellini + * + * (C) Copyright 2001 + * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * This provides a bit-banged interface to the ethernet MII management + * channel. + */ + +#include +#include +#include +#include + +#define BB_MII_RELOCATE(v,off) (v += (v?off:0)) + +DECLARE_GLOBAL_DATA_PTR; + +#ifndef CONFIG_BITBANGMII_MULTI + +/* + * If CONFIG_BITBANGMII_MULTI is not defined we use a + * compatibility layer with the previous miiphybb implementation + * based on macros usage. + * + */ +static int bb_mii_init_wrap(struct bb_miiphy_bus *bus) +{ +#ifdef MII_INIT + MII_INIT; +#endif + return 0; +} + +static int bb_mdio_active_wrap(struct bb_miiphy_bus *bus) +{ +#ifdef MDIO_DECLARE + MDIO_DECLARE; +#endif + MDIO_ACTIVE; + return 0; +} + +static int bb_mdio_tristate_wrap(struct bb_miiphy_bus *bus) +{ +#ifdef MDIO_DECLARE + MDIO_DECLARE; +#endif + MDIO_TRISTATE; + return 0; +} + +static int bb_set_mdio_wrap(struct bb_miiphy_bus *bus, int v) +{ +#ifdef MDIO_DECLARE + MDIO_DECLARE; +#endif + MDIO(v); + return 0; +} + +static int bb_get_mdio_wrap(struct bb_miiphy_bus *bus, int *v) +{ +#ifdef MDIO_DECLARE + MDIO_DECLARE; +#endif + *v = MDIO_READ; + return 0; +} + +static int bb_set_mdc_wrap(struct bb_miiphy_bus *bus, int v) +{ +#ifdef MDC_DECLARE + MDC_DECLARE; +#endif + MDC(v); + return 0; +} + +static int bb_delay_wrap(struct bb_miiphy_bus *bus) +{ + MIIDELAY; + return 0; +} + +struct bb_miiphy_bus bb_miiphy_buses[] = { + { + .name = BB_MII_DEVNAME, + .init = bb_mii_init_wrap, + .mdio_active = bb_mdio_active_wrap, + .mdio_tristate = bb_mdio_tristate_wrap, + .set_mdio = bb_set_mdio_wrap, + .get_mdio = bb_get_mdio_wrap, + .set_mdc = bb_set_mdc_wrap, + .delay = bb_delay_wrap, + } +}; + +int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / + sizeof(bb_miiphy_buses[0]); +#endif + +void bb_miiphy_init(void) +{ + int i; + + for (i = 0; i < bb_miiphy_buses_num; i++) { +#if defined(CONFIG_NEEDS_MANUAL_RELOC) + /* Relocate the hook pointers*/ + BB_MII_RELOCATE(bb_miiphy_buses[i].init, gd->reloc_off); + BB_MII_RELOCATE(bb_miiphy_buses[i].mdio_active, gd->reloc_off); + BB_MII_RELOCATE(bb_miiphy_buses[i].mdio_tristate, gd->reloc_off); + BB_MII_RELOCATE(bb_miiphy_buses[i].set_mdio, gd->reloc_off); + BB_MII_RELOCATE(bb_miiphy_buses[i].get_mdio, gd->reloc_off); + BB_MII_RELOCATE(bb_miiphy_buses[i].set_mdc, gd->reloc_off); + BB_MII_RELOCATE(bb_miiphy_buses[i].delay, gd->reloc_off); +#endif + if (bb_miiphy_buses[i].init != NULL) { + bb_miiphy_buses[i].init(&bb_miiphy_buses[i]); + } + } +} + +static inline struct bb_miiphy_bus *bb_miiphy_getbus(const char *devname) +{ +#ifdef CONFIG_BITBANGMII_MULTI + int i; + + /* Search the correct bus */ + for (i = 0; i < bb_miiphy_buses_num; i++) { + if (!strcmp(bb_miiphy_buses[i].name, devname)) { + return &bb_miiphy_buses[i]; + } + } + return NULL; +#else + /* We have just one bitbanging bus */ + return &bb_miiphy_buses[0]; +#endif +} + +/***************************************************************************** + * + * Utility to send the preamble, address, and register (common to read + * and write). + */ +static void miiphy_pre(struct bb_miiphy_bus *bus, char read, + unsigned char addr, unsigned char reg) +{ + int j; + + /* + * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure. + * The IEEE spec says this is a PHY optional requirement. The AMD + * 79C874 requires one after power up and one after a MII communications + * error. This means that we are doing more preambles than we need, + * but it is safer and will be much more robust. + */ + + bus->mdio_active(bus); + bus->set_mdio(bus, 1); + for (j = 0; j < 32; j++) { + bus->set_mdc(bus, 0); + bus->delay(bus); + bus->set_mdc(bus, 1); + bus->delay(bus); + } + + /* send the start bit (01) and the read opcode (10) or write (10) */ + bus->set_mdc(bus, 0); + bus->set_mdio(bus, 0); + bus->delay(bus); + bus->set_mdc(bus, 1); + bus->delay(bus); + bus->set_mdc(bus, 0); + bus->set_mdio(bus, 1); + bus->delay(bus); + bus->set_mdc(bus, 1); + bus->delay(bus); + bus->set_mdc(bus, 0); + bus->set_mdio(bus, read); + bus->delay(bus); + bus->set_mdc(bus, 1); + bus->delay(bus); + bus->set_mdc(bus, 0); + bus->set_mdio(bus, !read); + bus->delay(bus); + bus->set_mdc(bus, 1); + bus->delay(bus); + + /* send the PHY address */ + for (j = 0; j < 5; j++) { + bus->set_mdc(bus, 0); + if ((addr & 0x10) == 0) { + bus->set_mdio(bus, 0); + } else { + bus->set_mdio(bus, 1); + } + bus->delay(bus); + bus->set_mdc(bus, 1); + bus->delay(bus); + addr <<= 1; + } + + /* send the register address */ + for (j = 0; j < 5; j++) { + bus->set_mdc(bus, 0); + if ((reg & 0x10) == 0) { + bus->set_mdio(bus, 0); + } else { + bus->set_mdio(bus, 1); + } + bus->delay(bus); + bus->set_mdc(bus, 1); + bus->delay(bus); + reg <<= 1; + } +} + +/***************************************************************************** + * + * Read a MII PHY register. + * + * Returns: + * 0 on success + */ +int bb_miiphy_read(const char *devname, unsigned char addr, + unsigned char reg, unsigned short *value) +{ + short rdreg; /* register working value */ + int v; + int j; /* counter */ + struct bb_miiphy_bus *bus; + + bus = bb_miiphy_getbus(devname); + if (bus == NULL) { + return -1; + } + + if (value == NULL) { + puts("NULL value pointer\n"); + return -1; + } + + miiphy_pre (bus, 1, addr, reg); + + /* tri-state our MDIO I/O pin so we can read */ + bus->set_mdc(bus, 0); + bus->mdio_tristate(bus); + bus->delay(bus); + bus->set_mdc(bus, 1); + bus->delay(bus); + + /* check the turnaround bit: the PHY should be driving it to zero */ + bus->get_mdio(bus, &v); + if (v != 0) { + /* puts ("PHY didn't drive TA low\n"); */ + for (j = 0; j < 32; j++) { + bus->set_mdc(bus, 0); + bus->delay(bus); + bus->set_mdc(bus, 1); + bus->delay(bus); + } + /* There is no PHY, set value to 0xFFFF and return */ + *value = 0xFFFF; + return -1; + } + + bus->set_mdc(bus, 0); + bus->delay(bus); + + /* read 16 bits of register data, MSB first */ + rdreg = 0; + for (j = 0; j < 16; j++) { + bus->set_mdc(bus, 1); + bus->delay(bus); + rdreg <<= 1; + bus->get_mdio(bus, &v); + rdreg |= (v & 0x1); + bus->set_mdc(bus, 0); + bus->delay(bus); + } + + bus->set_mdc(bus, 1); + bus->delay(bus); + bus->set_mdc(bus, 0); + bus->delay(bus); + bus->set_mdc(bus, 1); + bus->delay(bus); + + *value = rdreg; + +#ifdef DEBUG + printf ("miiphy_read(0x%x) @ 0x%x = 0x%04x\n", reg, addr, *value); +#endif + + return 0; +} + + +/***************************************************************************** + * + * Write a MII PHY register. + * + * Returns: + * 0 on success + */ +int bb_miiphy_write (const char *devname, unsigned char addr, + unsigned char reg, unsigned short value) +{ + struct bb_miiphy_bus *bus; + int j; /* counter */ + + bus = bb_miiphy_getbus(devname); + if (bus == NULL) { + /* Bus not found! */ + return -1; + } + + miiphy_pre (bus, 0, addr, reg); + + /* send the turnaround (10) */ + bus->set_mdc(bus, 0); + bus->set_mdio(bus, 1); + bus->delay(bus); + bus->set_mdc(bus, 1); + bus->delay(bus); + bus->set_mdc(bus, 0); + bus->set_mdio(bus, 0); + bus->delay(bus); + bus->set_mdc(bus, 1); + bus->delay(bus); + + /* write 16 bits of register data, MSB first */ + for (j = 0; j < 16; j++) { + bus->set_mdc(bus, 0); + if ((value & 0x00008000) == 0) { + bus->set_mdio(bus, 0); + } else { + bus->set_mdio(bus, 1); + } + bus->delay(bus); + bus->set_mdc(bus, 1); + bus->delay(bus); + value <<= 1; + } + + /* + * Tri-state the MDIO line. + */ + bus->mdio_tristate(bus); + bus->set_mdc(bus, 0); + bus->delay(bus); + bus->set_mdc(bus, 1); + bus->delay(bus); + + return 0; +}