X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Fdrivers%2Fblock%2Fahci.c;fp=qemu%2Froms%2Fu-boot%2Fdrivers%2Fblock%2Fahci.c;h=c8f65739e9778a1578dc7aa17eb3448e9c749a46;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/roms/u-boot/drivers/block/ahci.c b/qemu/roms/u-boot/drivers/block/ahci.c new file mode 100644 index 000000000..c8f65739e --- /dev/null +++ b/qemu/roms/u-boot/drivers/block/ahci.c @@ -0,0 +1,994 @@ +/* + * Copyright (C) Freescale Semiconductor, Inc. 2006. + * Author: Jason Jin + * Zhang Wei + * + * SPDX-License-Identifier: GPL-2.0+ + * + * with the reference on libata and ahci drvier in kernel + */ +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int ata_io_flush(u8 port); + +struct ahci_probe_ent *probe_ent = NULL; +u16 *ataid[AHCI_MAX_PORTS]; + +#define writel_with_flush(a,b) do { writel(a,b); readl(b); } while (0) + +/* + * Some controllers limit number of blocks they can read/write at once. + * Contemporary SSD devices work much faster if the read/write size is aligned + * to a power of 2. Let's set default to 128 and allowing to be overwritten if + * needed. + */ +#ifndef MAX_SATA_BLOCKS_READ_WRITE +#define MAX_SATA_BLOCKS_READ_WRITE 0x80 +#endif + +/* Maximum timeouts for each event */ +#define WAIT_MS_SPINUP 20000 +#define WAIT_MS_DATAIO 5000 +#define WAIT_MS_FLUSH 5000 +#define WAIT_MS_LINKUP 40 + +static inline u32 ahci_port_base(u32 base, u32 port) +{ + return base + 0x100 + (port * 0x80); +} + + +static void ahci_setup_port(struct ahci_ioports *port, unsigned long base, + unsigned int port_idx) +{ + base = ahci_port_base(base, port_idx); + + port->cmd_addr = base; + port->scr_addr = base + PORT_SCR; +} + + +#define msleep(a) udelay(a * 1000) + +static void ahci_dcache_flush_range(unsigned begin, unsigned len) +{ + const unsigned long start = begin; + const unsigned long end = start + len; + + debug("%s: flush dcache: [%#lx, %#lx)\n", __func__, start, end); + flush_dcache_range(start, end); +} + +/* + * SATA controller DMAs to physical RAM. Ensure data from the + * controller is invalidated from dcache; next access comes from + * physical RAM. + */ +static void ahci_dcache_invalidate_range(unsigned begin, unsigned len) +{ + const unsigned long start = begin; + const unsigned long end = start + len; + + debug("%s: invalidate dcache: [%#lx, %#lx)\n", __func__, start, end); + invalidate_dcache_range(start, end); +} + +/* + * Ensure data for SATA controller is flushed out of dcache and + * written to physical memory. + */ +static void ahci_dcache_flush_sata_cmd(struct ahci_ioports *pp) +{ + ahci_dcache_flush_range((unsigned long)pp->cmd_slot, + AHCI_PORT_PRIV_DMA_SZ); +} + +static int waiting_for_cmd_completed(volatile u8 *offset, + int timeout_msec, + u32 sign) +{ + int i; + u32 status; + + for (i = 0; ((status = readl(offset)) & sign) && i < timeout_msec; i++) + msleep(1); + + return (i < timeout_msec) ? 0 : -1; +} + +int __weak ahci_link_up(struct ahci_probe_ent *probe_ent, u8 port) +{ + u32 tmp; + int j = 0; + u8 *port_mmio = (u8 *)probe_ent->port[port].port_mmio; + + /* + * Bring up SATA link. + * SATA link bringup time is usually less than 1 ms; only very + * rarely has it taken between 1-2 ms. Never seen it above 2 ms. + */ + while (j < WAIT_MS_LINKUP) { + tmp = readl(port_mmio + PORT_SCR_STAT); + tmp &= PORT_SCR_STAT_DET_MASK; + if (tmp == PORT_SCR_STAT_DET_PHYRDY) + return 0; + udelay(1000); + j++; + } + return 1; +} + +static int ahci_host_init(struct ahci_probe_ent *probe_ent) +{ +#ifndef CONFIG_SCSI_AHCI_PLAT + pci_dev_t pdev = probe_ent->dev; + u16 tmp16; + unsigned short vendor; +#endif + volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base; + u32 tmp, cap_save, cmd; + int i, j, ret; + volatile u8 *port_mmio; + u32 port_map; + + debug("ahci_host_init: start\n"); + + cap_save = readl(mmio + HOST_CAP); + cap_save &= ((1 << 28) | (1 << 17)); + cap_save |= (1 << 27); /* Staggered Spin-up. Not needed. */ + + /* global controller reset */ + tmp = readl(mmio + HOST_CTL); + if ((tmp & HOST_RESET) == 0) + writel_with_flush(tmp | HOST_RESET, mmio + HOST_CTL); + + /* reset must complete within 1 second, or + * the hardware should be considered fried. + */ + i = 1000; + do { + udelay(1000); + tmp = readl(mmio + HOST_CTL); + if (!i--) { + debug("controller reset failed (0x%x)\n", tmp); + return -1; + } + } while (tmp & HOST_RESET); + + writel_with_flush(HOST_AHCI_EN, mmio + HOST_CTL); + writel(cap_save, mmio + HOST_CAP); + writel_with_flush(0xf, mmio + HOST_PORTS_IMPL); + +#ifndef CONFIG_SCSI_AHCI_PLAT + pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor); + + if (vendor == PCI_VENDOR_ID_INTEL) { + u16 tmp16; + pci_read_config_word(pdev, 0x92, &tmp16); + tmp16 |= 0xf; + pci_write_config_word(pdev, 0x92, tmp16); + } +#endif + probe_ent->cap = readl(mmio + HOST_CAP); + probe_ent->port_map = readl(mmio + HOST_PORTS_IMPL); + port_map = probe_ent->port_map; + probe_ent->n_ports = (probe_ent->cap & 0x1f) + 1; + + debug("cap 0x%x port_map 0x%x n_ports %d\n", + probe_ent->cap, probe_ent->port_map, probe_ent->n_ports); + + if (probe_ent->n_ports > CONFIG_SYS_SCSI_MAX_SCSI_ID) + probe_ent->n_ports = CONFIG_SYS_SCSI_MAX_SCSI_ID; + + for (i = 0; i < probe_ent->n_ports; i++) { + if (!(port_map & (1 << i))) + continue; + probe_ent->port[i].port_mmio = ahci_port_base((u32) mmio, i); + port_mmio = (u8 *) probe_ent->port[i].port_mmio; + ahci_setup_port(&probe_ent->port[i], (unsigned long)mmio, i); + + /* make sure port is not active */ + tmp = readl(port_mmio + PORT_CMD); + if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | + PORT_CMD_FIS_RX | PORT_CMD_START)) { + debug("Port %d is active. Deactivating.\n", i); + tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON | + PORT_CMD_FIS_RX | PORT_CMD_START); + writel_with_flush(tmp, port_mmio + PORT_CMD); + + /* spec says 500 msecs for each bit, so + * this is slightly incorrect. + */ + msleep(500); + } + + /* Add the spinup command to whatever mode bits may + * already be on in the command register. + */ + cmd = readl(port_mmio + PORT_CMD); + cmd |= PORT_CMD_FIS_RX; + cmd |= PORT_CMD_SPIN_UP; + writel_with_flush(cmd, port_mmio + PORT_CMD); + + /* Bring up SATA link. */ + ret = ahci_link_up(probe_ent, i); + if (ret) { + printf("SATA link %d timeout.\n", i); + continue; + } else { + debug("SATA link ok.\n"); + } + + /* Clear error status */ + tmp = readl(port_mmio + PORT_SCR_ERR); + if (tmp) + writel(tmp, port_mmio + PORT_SCR_ERR); + + debug("Spinning up device on SATA port %d... ", i); + + j = 0; + while (j < WAIT_MS_SPINUP) { + tmp = readl(port_mmio + PORT_TFDATA); + if (!(tmp & (ATA_BUSY | ATA_DRQ))) + break; + udelay(1000); + tmp = readl(port_mmio + PORT_SCR_STAT); + tmp &= PORT_SCR_STAT_DET_MASK; + if (tmp == PORT_SCR_STAT_DET_PHYRDY) + break; + j++; + } + + tmp = readl(port_mmio + PORT_SCR_STAT) & PORT_SCR_STAT_DET_MASK; + if (tmp == PORT_SCR_STAT_DET_COMINIT) { + debug("SATA link %d down (COMINIT received), retrying...\n", i); + i--; + continue; + } + + printf("Target spinup took %d ms.\n", j); + if (j == WAIT_MS_SPINUP) + debug("timeout.\n"); + else + debug("ok.\n"); + + tmp = readl(port_mmio + PORT_SCR_ERR); + debug("PORT_SCR_ERR 0x%x\n", tmp); + writel(tmp, port_mmio + PORT_SCR_ERR); + + /* ack any pending irq events for this port */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + debug("PORT_IRQ_STAT 0x%x\n", tmp); + if (tmp) + writel(tmp, port_mmio + PORT_IRQ_STAT); + + writel(1 << i, mmio + HOST_IRQ_STAT); + + /* set irq mask (enables interrupts) */ + writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK); + + /* register linkup ports */ + tmp = readl(port_mmio + PORT_SCR_STAT); + debug("SATA port %d status: 0x%x\n", i, tmp); + if ((tmp & PORT_SCR_STAT_DET_MASK) == PORT_SCR_STAT_DET_PHYRDY) + probe_ent->link_port_map |= (0x01 << i); + } + + tmp = readl(mmio + HOST_CTL); + debug("HOST_CTL 0x%x\n", tmp); + writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL); + tmp = readl(mmio + HOST_CTL); + debug("HOST_CTL 0x%x\n", tmp); +#ifndef CONFIG_SCSI_AHCI_PLAT + pci_read_config_word(pdev, PCI_COMMAND, &tmp16); + tmp |= PCI_COMMAND_MASTER; + pci_write_config_word(pdev, PCI_COMMAND, tmp16); +#endif + return 0; +} + + +static void ahci_print_info(struct ahci_probe_ent *probe_ent) +{ +#ifndef CONFIG_SCSI_AHCI_PLAT + pci_dev_t pdev = probe_ent->dev; + u16 cc; +#endif + volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base; + u32 vers, cap, cap2, impl, speed; + const char *speed_s; + const char *scc_s; + + vers = readl(mmio + HOST_VERSION); + cap = probe_ent->cap; + cap2 = readl(mmio + HOST_CAP2); + impl = probe_ent->port_map; + + speed = (cap >> 20) & 0xf; + if (speed == 1) + speed_s = "1.5"; + else if (speed == 2) + speed_s = "3"; + else if (speed == 3) + speed_s = "6"; + else + speed_s = "?"; + +#ifdef CONFIG_SCSI_AHCI_PLAT + scc_s = "SATA"; +#else + pci_read_config_word(pdev, 0x0a, &cc); + if (cc == 0x0101) + scc_s = "IDE"; + else if (cc == 0x0106) + scc_s = "SATA"; + else if (cc == 0x0104) + scc_s = "RAID"; + else + scc_s = "unknown"; +#endif + printf("AHCI %02x%02x.%02x%02x " + "%u slots %u ports %s Gbps 0x%x impl %s mode\n", + (vers >> 24) & 0xff, + (vers >> 16) & 0xff, + (vers >> 8) & 0xff, + vers & 0xff, + ((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s); + + printf("flags: " + "%s%s%s%s%s%s%s" + "%s%s%s%s%s%s%s" + "%s%s%s%s%s%s\n", + cap & (1 << 31) ? "64bit " : "", + cap & (1 << 30) ? "ncq " : "", + cap & (1 << 28) ? "ilck " : "", + cap & (1 << 27) ? "stag " : "", + cap & (1 << 26) ? "pm " : "", + cap & (1 << 25) ? "led " : "", + cap & (1 << 24) ? "clo " : "", + cap & (1 << 19) ? "nz " : "", + cap & (1 << 18) ? "only " : "", + cap & (1 << 17) ? "pmp " : "", + cap & (1 << 16) ? "fbss " : "", + cap & (1 << 15) ? "pio " : "", + cap & (1 << 14) ? "slum " : "", + cap & (1 << 13) ? "part " : "", + cap & (1 << 7) ? "ccc " : "", + cap & (1 << 6) ? "ems " : "", + cap & (1 << 5) ? "sxs " : "", + cap2 & (1 << 2) ? "apst " : "", + cap2 & (1 << 1) ? "nvmp " : "", + cap2 & (1 << 0) ? "boh " : ""); +} + +#ifndef CONFIG_SCSI_AHCI_PLAT +static int ahci_init_one(pci_dev_t pdev) +{ + u16 vendor; + int rc; + + probe_ent = malloc(sizeof(struct ahci_probe_ent)); + if (!probe_ent) { + printf("%s: No memory for probe_ent\n", __func__); + return -ENOMEM; + } + + memset(probe_ent, 0, sizeof(struct ahci_probe_ent)); + probe_ent->dev = pdev; + + probe_ent->host_flags = ATA_FLAG_SATA + | ATA_FLAG_NO_LEGACY + | ATA_FLAG_MMIO + | ATA_FLAG_PIO_DMA + | ATA_FLAG_NO_ATAPI; + probe_ent->pio_mask = 0x1f; + probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */ + + pci_read_config_dword(pdev, PCI_BASE_ADDRESS_5, &probe_ent->mmio_base); + debug("ahci mmio_base=0x%08x\n", probe_ent->mmio_base); + + /* Take from kernel: + * JMicron-specific fixup: + * make sure we're in AHCI mode + */ + pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor); + if (vendor == 0x197b) + pci_write_config_byte(pdev, 0x41, 0xa1); + + /* initialize adapter */ + rc = ahci_host_init(probe_ent); + if (rc) + goto err_out; + + ahci_print_info(probe_ent); + + return 0; + + err_out: + return rc; +} +#endif + +#define MAX_DATA_BYTE_COUNT (4*1024*1024) + +static int ahci_fill_sg(u8 port, unsigned char *buf, int buf_len) +{ + struct ahci_ioports *pp = &(probe_ent->port[port]); + struct ahci_sg *ahci_sg = pp->cmd_tbl_sg; + u32 sg_count; + int i; + + sg_count = ((buf_len - 1) / MAX_DATA_BYTE_COUNT) + 1; + if (sg_count > AHCI_MAX_SG) { + printf("Error:Too much sg!\n"); + return -1; + } + + for (i = 0; i < sg_count; i++) { + ahci_sg->addr = + cpu_to_le32((u32) buf + i * MAX_DATA_BYTE_COUNT); + ahci_sg->addr_hi = 0; + ahci_sg->flags_size = cpu_to_le32(0x3fffff & + (buf_len < MAX_DATA_BYTE_COUNT + ? (buf_len - 1) + : (MAX_DATA_BYTE_COUNT - 1))); + ahci_sg++; + buf_len -= MAX_DATA_BYTE_COUNT; + } + + return sg_count; +} + + +static void ahci_fill_cmd_slot(struct ahci_ioports *pp, u32 opts) +{ + pp->cmd_slot->opts = cpu_to_le32(opts); + pp->cmd_slot->status = 0; + pp->cmd_slot->tbl_addr = cpu_to_le32(pp->cmd_tbl & 0xffffffff); + pp->cmd_slot->tbl_addr_hi = 0; +} + + +#ifdef CONFIG_AHCI_SETFEATURES_XFER +static void ahci_set_feature(u8 port) +{ + struct ahci_ioports *pp = &(probe_ent->port[port]); + volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio; + u32 cmd_fis_len = 5; /* five dwords */ + u8 fis[20]; + + /* set feature */ + memset(fis, 0, sizeof(fis)); + fis[0] = 0x27; + fis[1] = 1 << 7; + fis[2] = ATA_CMD_SET_FEATURES; + fis[3] = SETFEATURES_XFER; + fis[12] = __ilog2(probe_ent->udma_mask + 1) + 0x40 - 0x01; + + memcpy((unsigned char *)pp->cmd_tbl, fis, sizeof(fis)); + ahci_fill_cmd_slot(pp, cmd_fis_len); + ahci_dcache_flush_sata_cmd(pp); + writel(1, port_mmio + PORT_CMD_ISSUE); + readl(port_mmio + PORT_CMD_ISSUE); + + if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, + WAIT_MS_DATAIO, 0x1)) { + printf("set feature error on port %d!\n", port); + } +} +#endif + + +static int ahci_port_start(u8 port) +{ + struct ahci_ioports *pp = &(probe_ent->port[port]); + volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio; + u32 port_status; + u32 mem; + + debug("Enter start port: %d\n", port); + port_status = readl(port_mmio + PORT_SCR_STAT); + debug("Port %d status: %x\n", port, port_status); + if ((port_status & 0xf) != 0x03) { + printf("No Link on this port!\n"); + return -1; + } + + mem = (u32) malloc(AHCI_PORT_PRIV_DMA_SZ + 2048); + if (!mem) { + free(pp); + printf("%s: No mem for table!\n", __func__); + return -ENOMEM; + } + + mem = (mem + 0x800) & (~0x7ff); /* Aligned to 2048-bytes */ + memset((u8 *) mem, 0, AHCI_PORT_PRIV_DMA_SZ); + + /* + * First item in chunk of DMA memory: 32-slot command table, + * 32 bytes each in size + */ + pp->cmd_slot = + (struct ahci_cmd_hdr *)(uintptr_t)virt_to_phys((void *)mem); + debug("cmd_slot = 0x%x\n", (unsigned)pp->cmd_slot); + mem += (AHCI_CMD_SLOT_SZ + 224); + + /* + * Second item: Received-FIS area + */ + pp->rx_fis = virt_to_phys((void *)mem); + mem += AHCI_RX_FIS_SZ; + + /* + * Third item: data area for storing a single command + * and its scatter-gather table + */ + pp->cmd_tbl = virt_to_phys((void *)mem); + debug("cmd_tbl_dma = 0x%x\n", pp->cmd_tbl); + + mem += AHCI_CMD_TBL_HDR; + pp->cmd_tbl_sg = + (struct ahci_sg *)(uintptr_t)virt_to_phys((void *)mem); + + writel_with_flush((u32) pp->cmd_slot, port_mmio + PORT_LST_ADDR); + + writel_with_flush(pp->rx_fis, port_mmio + PORT_FIS_ADDR); + + writel_with_flush(PORT_CMD_ICC_ACTIVE | PORT_CMD_FIS_RX | + PORT_CMD_POWER_ON | PORT_CMD_SPIN_UP | + PORT_CMD_START, port_mmio + PORT_CMD); + + debug("Exit start port %d\n", port); + + return 0; +} + + +static int ahci_device_data_io(u8 port, u8 *fis, int fis_len, u8 *buf, + int buf_len, u8 is_write) +{ + + struct ahci_ioports *pp = &(probe_ent->port[port]); + volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio; + u32 opts; + u32 port_status; + int sg_count; + + debug("Enter %s: for port %d\n", __func__, port); + + if (port > probe_ent->n_ports) { + printf("Invalid port number %d\n", port); + return -1; + } + + port_status = readl(port_mmio + PORT_SCR_STAT); + if ((port_status & 0xf) != 0x03) { + debug("No Link on port %d!\n", port); + return -1; + } + + memcpy((unsigned char *)pp->cmd_tbl, fis, fis_len); + + sg_count = ahci_fill_sg(port, buf, buf_len); + opts = (fis_len >> 2) | (sg_count << 16) | (is_write << 6); + ahci_fill_cmd_slot(pp, opts); + + ahci_dcache_flush_sata_cmd(pp); + ahci_dcache_flush_range((unsigned)buf, (unsigned)buf_len); + + writel_with_flush(1, port_mmio + PORT_CMD_ISSUE); + + if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, + WAIT_MS_DATAIO, 0x1)) { + printf("timeout exit!\n"); + return -1; + } + + ahci_dcache_invalidate_range((unsigned)buf, (unsigned)buf_len); + debug("%s: %d byte transferred.\n", __func__, pp->cmd_slot->status); + + return 0; +} + + +static char *ata_id_strcpy(u16 *target, u16 *src, int len) +{ + int i; + for (i = 0; i < len / 2; i++) + target[i] = swab16(src[i]); + return (char *)target; +} + +/* + * SCSI INQUIRY command operation. + */ +static int ata_scsiop_inquiry(ccb *pccb) +{ + static const u8 hdr[] = { + 0, + 0, + 0x5, /* claim SPC-3 version compatibility */ + 2, + 95 - 4, + }; + u8 fis[20]; + u16 *idbuf; + ALLOC_CACHE_ALIGN_BUFFER(u16, tmpid, ATA_ID_WORDS); + u8 port; + + /* Clean ccb data buffer */ + memset(pccb->pdata, 0, pccb->datalen); + + memcpy(pccb->pdata, hdr, sizeof(hdr)); + + if (pccb->datalen <= 35) + return 0; + + memset(fis, 0, sizeof(fis)); + /* Construct the FIS */ + fis[0] = 0x27; /* Host to device FIS. */ + fis[1] = 1 << 7; /* Command FIS. */ + fis[2] = ATA_CMD_ID_ATA; /* Command byte. */ + + /* Read id from sata */ + port = pccb->target; + + if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), (u8 *)tmpid, + ATA_ID_WORDS * 2, 0)) { + debug("scsi_ahci: SCSI inquiry command failure.\n"); + return -EIO; + } + + if (!ataid[port]) { + ataid[port] = malloc(ATA_ID_WORDS * 2); + if (!ataid[port]) { + printf("%s: No memory for ataid[port]\n", __func__); + return -ENOMEM; + } + } + + idbuf = ataid[port]; + + memcpy(idbuf, tmpid, ATA_ID_WORDS * 2); + ata_swap_buf_le16(idbuf, ATA_ID_WORDS); + + memcpy(&pccb->pdata[8], "ATA ", 8); + ata_id_strcpy((u16 *)&pccb->pdata[16], &idbuf[ATA_ID_PROD], 16); + ata_id_strcpy((u16 *)&pccb->pdata[32], &idbuf[ATA_ID_FW_REV], 4); + +#ifdef DEBUG + ata_dump_id(idbuf); +#endif + return 0; +} + + +/* + * SCSI READ10/WRITE10 command operation. + */ +static int ata_scsiop_read_write(ccb *pccb, u8 is_write) +{ + u32 lba = 0; + u16 blocks = 0; + u8 fis[20]; + u8 *user_buffer = pccb->pdata; + u32 user_buffer_size = pccb->datalen; + + /* Retrieve the base LBA number from the ccb structure. */ + memcpy(&lba, pccb->cmd + 2, sizeof(lba)); + lba = be32_to_cpu(lba); + + /* + * And the number of blocks. + * + * For 10-byte and 16-byte SCSI R/W commands, transfer + * length 0 means transfer 0 block of data. + * However, for ATA R/W commands, sector count 0 means + * 256 or 65536 sectors, not 0 sectors as in SCSI. + * + * WARNING: one or two older ATA drives treat 0 as 0... + */ + blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]); + + debug("scsi_ahci: %s %d blocks starting from lba 0x%x\n", + is_write ? "write" : "read", (unsigned)lba, blocks); + + /* Preset the FIS */ + memset(fis, 0, sizeof(fis)); + fis[0] = 0x27; /* Host to device FIS. */ + fis[1] = 1 << 7; /* Command FIS. */ + /* Command byte (read/write). */ + fis[2] = is_write ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT; + + while (blocks) { + u16 now_blocks; /* number of blocks per iteration */ + u32 transfer_size; /* number of bytes per iteration */ + + now_blocks = min(MAX_SATA_BLOCKS_READ_WRITE, blocks); + + transfer_size = ATA_SECT_SIZE * now_blocks; + if (transfer_size > user_buffer_size) { + printf("scsi_ahci: Error: buffer too small.\n"); + return -EIO; + } + + /* LBA48 SATA command but only use 32bit address range within + * that. The next smaller command range (28bit) is too small. + */ + fis[4] = (lba >> 0) & 0xff; + fis[5] = (lba >> 8) & 0xff; + fis[6] = (lba >> 16) & 0xff; + fis[7] = 1 << 6; /* device reg: set LBA mode */ + fis[8] = ((lba >> 24) & 0xff); + fis[3] = 0xe0; /* features */ + + /* Block (sector) count */ + fis[12] = (now_blocks >> 0) & 0xff; + fis[13] = (now_blocks >> 8) & 0xff; + + /* Read/Write from ahci */ + if (ahci_device_data_io(pccb->target, (u8 *) &fis, sizeof(fis), + user_buffer, user_buffer_size, + is_write)) { + debug("scsi_ahci: SCSI %s10 command failure.\n", + is_write ? "WRITE" : "READ"); + return -EIO; + } + + /* If this transaction is a write, do a following flush. + * Writes in u-boot are so rare, and the logic to know when is + * the last write and do a flush only there is sufficiently + * difficult. Just do a flush after every write. This incurs, + * usually, one extra flush when the rare writes do happen. + */ + if (is_write) { + if (-EIO == ata_io_flush(pccb->target)) + return -EIO; + } + user_buffer += transfer_size; + user_buffer_size -= transfer_size; + blocks -= now_blocks; + lba += now_blocks; + } + + return 0; +} + + +/* + * SCSI READ CAPACITY10 command operation. + */ +static int ata_scsiop_read_capacity10(ccb *pccb) +{ + u32 cap; + u64 cap64; + u32 block_size; + + if (!ataid[pccb->target]) { + printf("scsi_ahci: SCSI READ CAPACITY10 command failure. " + "\tNo ATA info!\n" + "\tPlease run SCSI commmand INQUIRY firstly!\n"); + return -EPERM; + } + + cap64 = ata_id_n_sectors(ataid[pccb->target]); + if (cap64 > 0x100000000ULL) + cap64 = 0xffffffff; + + cap = cpu_to_be32(cap64); + memcpy(pccb->pdata, &cap, sizeof(cap)); + + block_size = cpu_to_be32((u32)512); + memcpy(&pccb->pdata[4], &block_size, 4); + + return 0; +} + + +/* + * SCSI READ CAPACITY16 command operation. + */ +static int ata_scsiop_read_capacity16(ccb *pccb) +{ + u64 cap; + u64 block_size; + + if (!ataid[pccb->target]) { + printf("scsi_ahci: SCSI READ CAPACITY16 command failure. " + "\tNo ATA info!\n" + "\tPlease run SCSI commmand INQUIRY firstly!\n"); + return -EPERM; + } + + cap = ata_id_n_sectors(ataid[pccb->target]); + cap = cpu_to_be64(cap); + memcpy(pccb->pdata, &cap, sizeof(cap)); + + block_size = cpu_to_be64((u64)512); + memcpy(&pccb->pdata[8], &block_size, 8); + + return 0; +} + + +/* + * SCSI TEST UNIT READY command operation. + */ +static int ata_scsiop_test_unit_ready(ccb *pccb) +{ + return (ataid[pccb->target]) ? 0 : -EPERM; +} + + +int scsi_exec(ccb *pccb) +{ + int ret; + + switch (pccb->cmd[0]) { + case SCSI_READ10: + ret = ata_scsiop_read_write(pccb, 0); + break; + case SCSI_WRITE10: + ret = ata_scsiop_read_write(pccb, 1); + break; + case SCSI_RD_CAPAC10: + ret = ata_scsiop_read_capacity10(pccb); + break; + case SCSI_RD_CAPAC16: + ret = ata_scsiop_read_capacity16(pccb); + break; + case SCSI_TST_U_RDY: + ret = ata_scsiop_test_unit_ready(pccb); + break; + case SCSI_INQUIRY: + ret = ata_scsiop_inquiry(pccb); + break; + default: + printf("Unsupport SCSI command 0x%02x\n", pccb->cmd[0]); + return false; + } + + if (ret) { + debug("SCSI command 0x%02x ret errno %d\n", pccb->cmd[0], ret); + return false; + } + return true; + +} + + +void scsi_low_level_init(int busdevfunc) +{ + int i; + u32 linkmap; + +#ifndef CONFIG_SCSI_AHCI_PLAT + ahci_init_one(busdevfunc); +#endif + + linkmap = probe_ent->link_port_map; + + for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) { + if (((linkmap >> i) & 0x01)) { + if (ahci_port_start((u8) i)) { + printf("Can not start port %d\n", i); + continue; + } +#ifdef CONFIG_AHCI_SETFEATURES_XFER + ahci_set_feature((u8) i); +#endif + } + } +} + +#ifdef CONFIG_SCSI_AHCI_PLAT +int ahci_init(u32 base) +{ + int i, rc = 0; + u32 linkmap; + + probe_ent = malloc(sizeof(struct ahci_probe_ent)); + if (!probe_ent) { + printf("%s: No memory for probe_ent\n", __func__); + return -ENOMEM; + } + + memset(probe_ent, 0, sizeof(struct ahci_probe_ent)); + + probe_ent->host_flags = ATA_FLAG_SATA + | ATA_FLAG_NO_LEGACY + | ATA_FLAG_MMIO + | ATA_FLAG_PIO_DMA + | ATA_FLAG_NO_ATAPI; + probe_ent->pio_mask = 0x1f; + probe_ent->udma_mask = 0x7f; /*Fixme,assume to support UDMA6 */ + + probe_ent->mmio_base = base; + + /* initialize adapter */ + rc = ahci_host_init(probe_ent); + if (rc) + goto err_out; + + ahci_print_info(probe_ent); + + linkmap = probe_ent->link_port_map; + + for (i = 0; i < CONFIG_SYS_SCSI_MAX_SCSI_ID; i++) { + if (((linkmap >> i) & 0x01)) { + if (ahci_port_start((u8) i)) { + printf("Can not start port %d\n", i); + continue; + } +#ifdef CONFIG_AHCI_SETFEATURES_XFER + ahci_set_feature((u8) i); +#endif + } + } +err_out: + return rc; +} + +void __weak scsi_init(void) +{ +} + +#endif + +/* + * In the general case of generic rotating media it makes sense to have a + * flush capability. It probably even makes sense in the case of SSDs because + * one cannot always know for sure what kind of internal cache/flush mechanism + * is embodied therein. At first it was planned to invoke this after the last + * write to disk and before rebooting. In practice, knowing, a priori, which + * is the last write is difficult. Because writing to the disk in u-boot is + * very rare, this flush command will be invoked after every block write. + */ +static int ata_io_flush(u8 port) +{ + u8 fis[20]; + struct ahci_ioports *pp = &(probe_ent->port[port]); + volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio; + u32 cmd_fis_len = 5; /* five dwords */ + + /* Preset the FIS */ + memset(fis, 0, 20); + fis[0] = 0x27; /* Host to device FIS. */ + fis[1] = 1 << 7; /* Command FIS. */ + fis[2] = ATA_CMD_FLUSH_EXT; + + memcpy((unsigned char *)pp->cmd_tbl, fis, 20); + ahci_fill_cmd_slot(pp, cmd_fis_len); + writel_with_flush(1, port_mmio + PORT_CMD_ISSUE); + + if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, + WAIT_MS_FLUSH, 0x1)) { + debug("scsi_ahci: flush command timeout on port %d.\n", port); + return -EIO; + } + + return 0; +} + + +void scsi_bus_reset(void) +{ + /*Not implement*/ +} + + +void scsi_print_error(ccb * pccb) +{ + /*The ahci error info can be read in the ahci driver*/ +}