X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Fboard%2Fgdsys%2F405ep%2Fio.c;fp=qemu%2Froms%2Fu-boot%2Fboard%2Fgdsys%2F405ep%2Fio.c;h=03d796cdb89b1b09eb9662328ea862341629d3a9;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/board/gdsys/405ep/io.c b/qemu/roms/u-boot/board/gdsys/405ep/io.c
new file mode 100644
index 000000000..03d796cdb
--- /dev/null
+++ b/qemu/roms/u-boot/board/gdsys/405ep/io.c
@@ -0,0 +1,214 @@
+/*
+ * (C) Copyright 2010
+ * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/ppc4xx-gpio.h>
+
+#include <dtt.h>
+#include <miiphy.h>
+
+#include "405ep.h"
+#include <gdsys_fpga.h>
+
+#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
+#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
+#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)
+
+#define PHYREG_CONTROL				0
+#define PHYREG_PAGE_ADDRESS			22
+#define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1	16
+#define PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2	26
+
+enum {
+	UNITTYPE_CCD_SWITCH = 1,
+};
+
+enum {
+	HWVER_100 = 0,
+	HWVER_110 = 1,
+	HWVER_121 = 2,
+	HWVER_122 = 3,
+};
+
+struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;
+
+int misc_init_r(void)
+{
+	/* startup fans */
+	dtt_init();
+
+	return 0;
+}
+
+int configure_gbit_phy(unsigned char addr)
+{
+	unsigned short value;
+
+	/* select page 2 */
+	if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
+		PHYREG_PAGE_ADDRESS, 0x0002))
+		goto err_out;
+	/* disable SGMII autonegotiation */
+	if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
+		PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2, 0x800a))
+		goto err_out;
+	/* select page 0 */
+	if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
+		PHYREG_PAGE_ADDRESS, 0x0000))
+		goto err_out;
+	/* switch from powerdown to normal operation */
+	if (miiphy_read(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
+		PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, &value))
+		goto err_out;
+	if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
+		PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, value & ~0x0004))
+		goto err_out;
+	/* reset phy so settings take effect */
+	if (miiphy_write(CONFIG_SYS_GBIT_MII_BUSNAME, addr,
+		PHYREG_CONTROL, 0x9140))
+		goto err_out;
+
+	return 0;
+
+err_out:
+	printf("Error writing to the PHY addr=%02x\n", addr);
+	return -1;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+	char *s = getenv("serial#");
+
+	puts("Board: CATCenter Io");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+
+	puts("\n");
+
+	return 0;
+}
+
+static void print_fpga_info(void)
+{
+	u16 versions;
+	u16 fpga_version;
+	u16 fpga_features;
+	unsigned unit_type;
+	unsigned hardware_version;
+	unsigned feature_channels;
+	unsigned feature_expansion;
+
+	FPGA_GET_REG(0, versions, &versions);
+	FPGA_GET_REG(0, fpga_version, &fpga_version);
+	FPGA_GET_REG(0, fpga_features, &fpga_features);
+
+	unit_type = (versions & 0xf000) >> 12;
+	hardware_version = versions & 0x000f;
+	feature_channels = fpga_features & 0x007f;
+	feature_expansion = fpga_features & (1<<15);
+
+	puts("FPGA:  ");
+
+	switch (unit_type) {
+	case UNITTYPE_CCD_SWITCH:
+		printf("CCD-Switch");
+		break;
+
+	default:
+		printf("UnitType %d(not supported)", unit_type);
+		break;
+	}
+
+	switch (hardware_version) {
+	case HWVER_100:
+		printf(" HW-Ver 1.00\n");
+		break;
+
+	case HWVER_110:
+		printf(" HW-Ver 1.10\n");
+		break;
+
+	case HWVER_121:
+		printf(" HW-Ver 1.21\n");
+		break;
+
+	case HWVER_122:
+		printf(" HW-Ver 1.22\n");
+		break;
+
+	default:
+		printf(" HW-Ver %d(not supported)\n",
+		       hardware_version);
+		break;
+	}
+
+	printf("       FPGA V %d.%02d, features:",
+		fpga_version / 100, fpga_version % 100);
+
+	printf(" %d channel(s)", feature_channels);
+
+	printf(", expansion %ssupported\n", feature_expansion ? "" : "un");
+}
+
+/*
+ * setup Gbit PHYs
+ */
+int last_stage_init(void)
+{
+	unsigned int k;
+
+	print_fpga_info();
+
+	miiphy_register(CONFIG_SYS_GBIT_MII_BUSNAME,
+		bb_miiphy_read, bb_miiphy_write);
+
+	for (k = 0; k < 32; ++k)
+		configure_gbit_phy(k);
+
+	/* take fpga serdes blocks out of reset */
+	FPGA_SET_REG(0, quad_serdes_reset, 0);
+
+	return 0;
+}
+
+void gd405ep_init(void)
+{
+}
+
+void gd405ep_set_fpga_reset(unsigned state)
+{
+	if (state) {
+		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
+		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
+	} else {
+		out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
+		out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
+	}
+}
+
+void gd405ep_setup_hw(void)
+{
+	/*
+	 * set "startup-finished"-gpios
+	 */
+	gpio_write_bit(21, 0);
+	gpio_write_bit(22, 1);
+}
+
+int gd405ep_get_fpga_done(unsigned fpga)
+{
+	return in_le16((void *)LATCH2_BASE) & CONFIG_SYS_FPGA_DONE(fpga);
+}