X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Fboard%2Ffreescale%2Fp1010rdb%2Fp1010rdb.c;fp=qemu%2Froms%2Fu-boot%2Fboard%2Ffreescale%2Fp1010rdb%2Fp1010rdb.c;h=62caf676c6458b41a23aac3c429f5e20709a6545;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/board/freescale/p1010rdb/p1010rdb.c b/qemu/roms/u-boot/board/freescale/p1010rdb/p1010rdb.c
new file mode 100644
index 000000000..62caf676c
--- /dev/null
+++ b/qemu/roms/u-boot/board/freescale/p1010rdb/p1010rdb.c
@@ -0,0 +1,564 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/io.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <fsl_mdio.h>
+#include <tsec.h>
+#include <mmc.h>
+#include <netdev.h>
+#include <pci.h>
+#include <asm/fsl_serdes.h>
+#include <fsl_ifc.h>
+#include <asm/fsl_pci.h>
+#include <hwconfig.h>
+#include <i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define GPIO4_PCIE_RESET_SET		0x08000000
+#define MUX_CPLD_CAN_UART		0x00
+#define MUX_CPLD_TDM			0x01
+#define MUX_CPLD_SPICS0_FLASH		0x00
+#define MUX_CPLD_SPICS0_SLIC		0x02
+#define PMUXCR1_IFC_MASK       0x00ffff00
+#define PMUXCR1_SDHC_MASK      0x00fff000
+#define PMUXCR1_SDHC_ENABLE    0x00555000
+
+enum {
+	MUX_TYPE_IFC,
+	MUX_TYPE_SDHC,
+	MUX_TYPE_SPIFLASH,
+	MUX_TYPE_TDM,
+	MUX_TYPE_CAN,
+	MUX_TYPE_CS0_NOR,
+	MUX_TYPE_CS0_NAND,
+};
+
+enum {
+	I2C_READ_BANK,
+	I2C_READ_PCB_VER,
+};
+
+static uint sd_ifc_mux;
+
+struct cpld_data {
+	u8 cpld_ver; /* cpld revision */
+#if defined(CONFIG_P1010RDB_PA)
+	u8 pcba_ver; /* pcb revision number */
+	u8 twindie_ddr3;
+	u8 res1[6];
+	u8 bank_sel; /* NOR Flash bank */
+	u8 res2[5];
+	u8 usb2_sel;
+	u8 res3[1];
+	u8 porsw_sel;
+	u8 tdm_can_sel;
+	u8 spi_cs0_sel; /* SPI CS0 SLIC/SPI Flash */
+	u8 por0; /* POR Options */
+	u8 por1; /* POR Options */
+	u8 por2; /* POR Options */
+	u8 por3; /* POR Options */
+#elif defined(CONFIG_P1010RDB_PB)
+	u8 rom_loc;
+#endif
+};
+
+int board_early_init_f(void)
+{
+	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+	struct fsl_ifc *ifc = (void *)CONFIG_SYS_IFC_ADDR;
+
+	/* Clock configuration to access CPLD using IFC(GPCM) */
+	setbits_be32(&ifc->ifc_gcr, 1 << IFC_GCR_TBCTL_TRN_TIME_SHIFT);
+	/*
+	* Reset PCIe slots via GPIO4
+	*/
+	setbits_be32(&pgpio->gpdir, GPIO4_PCIE_RESET_SET);
+	setbits_be32(&pgpio->gpdat, GPIO4_PCIE_RESET_SET);
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, flash_esel, BOOKE_PAGESZ_16M, 1);
+
+	set_tlb(1, flashbase + 0x1000000,
+			CONFIG_SYS_FLASH_BASE_PHYS + 0x1000000,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, flash_esel+1, BOOKE_PAGESZ_16M, 1);
+	return 0;
+}
+
+#ifdef CONFIG_PCI
+void pci_init_board(void)
+{
+	fsl_pcie_init_board(0);
+}
+#endif /* ifdef CONFIG_PCI */
+
+int config_board_mux(int ctrl_type)
+{
+	ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u8 tmp;
+
+#if defined(CONFIG_P1010RDB_PA)
+	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+
+	switch (ctrl_type) {
+	case MUX_TYPE_IFC:
+		i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+		tmp = 0xf0;
+		i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1);
+		tmp = 0x01;
+		i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1);
+		sd_ifc_mux = MUX_TYPE_IFC;
+		clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
+		break;
+	case MUX_TYPE_SDHC:
+		i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+		tmp = 0xf0;
+		i2c_write(I2C_PCA9557_ADDR1, 3, 1, &tmp, 1);
+		tmp = 0x05;
+		i2c_write(I2C_PCA9557_ADDR1, 1, 1, &tmp, 1);
+		sd_ifc_mux = MUX_TYPE_SDHC;
+		clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
+				PMUXCR1_SDHC_ENABLE);
+		break;
+	case MUX_TYPE_SPIFLASH:
+		out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_FLASH);
+		break;
+	case MUX_TYPE_TDM:
+		out_8(&cpld_data->tdm_can_sel, MUX_CPLD_TDM);
+		out_8(&cpld_data->spi_cs0_sel, MUX_CPLD_SPICS0_SLIC);
+		break;
+	case MUX_TYPE_CAN:
+		out_8(&cpld_data->tdm_can_sel, MUX_CPLD_CAN_UART);
+		break;
+	default:
+		break;
+	}
+#elif defined(CONFIG_P1010RDB_PB)
+	uint orig_bus = i2c_get_bus_num();
+	i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+
+	switch (ctrl_type) {
+	case MUX_TYPE_IFC:
+		i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+		clrbits_8(&tmp, 0x04);
+		i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+		i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+		clrbits_8(&tmp, 0x04);
+		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+		sd_ifc_mux = MUX_TYPE_IFC;
+		clrbits_be32(&gur->pmuxcr, PMUXCR1_IFC_MASK);
+		break;
+	case MUX_TYPE_SDHC:
+		i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+		setbits_8(&tmp, 0x04);
+		i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+		i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+		clrbits_8(&tmp, 0x04);
+		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+		sd_ifc_mux = MUX_TYPE_SDHC;
+		clrsetbits_be32(&gur->pmuxcr, PMUXCR1_SDHC_MASK,
+				PMUXCR1_SDHC_ENABLE);
+		break;
+	case MUX_TYPE_SPIFLASH:
+		i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+		clrbits_8(&tmp, 0x80);
+		i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+		i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+		clrbits_8(&tmp, 0x80);
+		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+		break;
+	case MUX_TYPE_TDM:
+		i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+		setbits_8(&tmp, 0x82);
+		i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+		i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+		clrbits_8(&tmp, 0x82);
+		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+		break;
+	case MUX_TYPE_CAN:
+		i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+		clrbits_8(&tmp, 0x02);
+		i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+		i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+		clrbits_8(&tmp, 0x02);
+		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+		break;
+	case MUX_TYPE_CS0_NOR:
+		i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+		clrbits_8(&tmp, 0x08);
+		i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+		i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+		clrbits_8(&tmp, 0x08);
+		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+		break;
+	case MUX_TYPE_CS0_NAND:
+		i2c_read(I2C_PCA9557_ADDR2, 0, 1, &tmp, 1);
+		setbits_8(&tmp, 0x08);
+		i2c_write(I2C_PCA9557_ADDR2, 1, 1, &tmp, 1);
+		i2c_read(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+		clrbits_8(&tmp, 0x08);
+		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &tmp, 1);
+		break;
+	default:
+		break;
+	}
+	i2c_set_bus_num(orig_bus);
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_P1010RDB_PB
+int i2c_pca9557_read(int type)
+{
+	u8 val;
+
+	i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+	i2c_read(I2C_PCA9557_ADDR2, 0, 1, &val, 1);
+
+	switch (type) {
+	case I2C_READ_BANK:
+		val = (val & 0x10) >> 4;
+		break;
+	case I2C_READ_PCB_VER:
+		val = ((val & 0x60) >> 5) + 1;
+		break;
+	default:
+		break;
+	}
+
+	return val;
+}
+#endif
+
+int checkboard(void)
+{
+	struct cpu_type *cpu;
+	struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
+	u8 val;
+
+	cpu = gd->arch.cpu;
+#if defined(CONFIG_P1010RDB_PA)
+	printf("Board: %sRDB-PA, ", cpu->name);
+#elif defined(CONFIG_P1010RDB_PB)
+	printf("Board: %sRDB-PB, ", cpu->name);
+	i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
+	i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE);
+	val = 0x0;  /* no polarity inversion */
+	i2c_write(I2C_PCA9557_ADDR2, 2, 1, &val, 1);
+#endif
+
+#ifdef CONFIG_SDCARD
+	/* switch to IFC to read info from CPLD */
+	config_board_mux(MUX_TYPE_IFC);
+#endif
+
+#if defined(CONFIG_P1010RDB_PA)
+	val = (in_8(&cpld_data->pcba_ver) & 0xf);
+	printf("PCB: v%x.0\n", val);
+#elif defined(CONFIG_P1010RDB_PB)
+	val = in_8(&cpld_data->cpld_ver);
+	printf("CPLD: v%x.%x, ", val >> 4, val & 0xf);
+	printf("PCB: v%x.0, ", i2c_pca9557_read(I2C_READ_PCB_VER));
+	val = in_8(&cpld_data->rom_loc) & 0xf;
+	puts("Boot from: ");
+	switch (val) {
+	case 0xf:
+		config_board_mux(MUX_TYPE_CS0_NOR);
+		printf("NOR vBank%d\n", i2c_pca9557_read(I2C_READ_BANK));
+		break;
+	case 0xe:
+		puts("SDHC\n");
+		val = 0x60; /* set pca9557 pin input/output */
+		i2c_write(I2C_PCA9557_ADDR2, 3, 1, &val, 1);
+		break;
+	case 0x5:
+		config_board_mux(MUX_TYPE_IFC);
+		config_board_mux(MUX_TYPE_CS0_NAND);
+		puts("NAND\n");
+		break;
+	case 0x6:
+		config_board_mux(MUX_TYPE_IFC);
+		puts("SPI\n");
+		break;
+	default:
+		puts("unknown\n");
+		break;
+	}
+#endif
+	return 0;
+}
+
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+	struct fsl_pq_mdio_info mdio_info;
+	struct tsec_info_struct tsec_info[4];
+	struct cpu_type *cpu;
+	int num = 0;
+
+	cpu = gd->arch.cpu;
+
+#ifdef CONFIG_TSEC1
+	SET_STD_TSEC_INFO(tsec_info[num], 1);
+	num++;
+#endif
+#ifdef CONFIG_TSEC2
+	SET_STD_TSEC_INFO(tsec_info[num], 2);
+	num++;
+#endif
+#ifdef CONFIG_TSEC3
+	/* P1014 and it's derivatives do not support eTSEC3 */
+	if (cpu->soc_ver != SVR_P1014) {
+		SET_STD_TSEC_INFO(tsec_info[num], 3);
+		num++;
+	}
+#endif
+	if (!num) {
+		printf("No TSECs initialized\n");
+		return 0;
+	}
+
+	mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+	mdio_info.name = DEFAULT_MII_NAME;
+
+	fsl_pq_mdio_init(bis, &mdio_info);
+
+	tsec_eth_init(bis, tsec_info, num);
+
+	return pci_eth_init(bis);
+}
+#endif
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void fdt_del_flexcan(void *blob)
+{
+	int nodeoff = 0;
+
+	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+				"fsl,p1010-flexcan")) >= 0) {
+		fdt_del_node(blob, nodeoff);
+	}
+}
+
+void fdt_del_spi_flash(void *blob)
+{
+	int nodeoff = 0;
+
+	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+				"spansion,s25sl12801")) >= 0) {
+		fdt_del_node(blob, nodeoff);
+	}
+}
+
+void fdt_del_spi_slic(void *blob)
+{
+	int nodeoff = 0;
+
+	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+				"zarlink,le88266")) >= 0) {
+		fdt_del_node(blob, nodeoff);
+	}
+}
+
+void fdt_del_tdm(void *blob)
+{
+	int nodeoff = 0;
+
+	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+				"fsl,starlite-tdm")) >= 0) {
+		fdt_del_node(blob, nodeoff);
+	}
+}
+
+void fdt_del_sdhc(void *blob)
+{
+	int nodeoff = 0;
+
+	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+			"fsl,esdhc")) >= 0) {
+		fdt_del_node(blob, nodeoff);
+	}
+}
+
+void fdt_del_ifc(void *blob)
+{
+	int nodeoff = 0;
+
+	while ((nodeoff = fdt_node_offset_by_compatible(blob, 0,
+				"fsl,ifc")) >= 0) {
+		fdt_del_node(blob, nodeoff);
+	}
+}
+
+void fdt_disable_uart1(void *blob)
+{
+	int nodeoff;
+
+	nodeoff = fdt_node_offset_by_compat_reg(blob, "fsl,ns16550",
+					CONFIG_SYS_NS16550_COM2);
+
+	if (nodeoff > 0) {
+		fdt_status_disabled(blob, nodeoff);
+	} else {
+		printf("WARNING unable to set status for fsl,ns16550 "
+			"uart1: %s\n", fdt_strerror(nodeoff));
+	}
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+	struct cpu_type *cpu;
+
+	cpu = gd->arch.cpu;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+#if defined(CONFIG_PCI)
+	FT_FSL_PCI_SETUP;
+#endif
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#if defined(CONFIG_HAS_FSL_DR_USB)
+	fdt_fixup_dr_usb(blob, bd);
+#endif
+
+       /* P1014 and it's derivatives don't support CAN and eTSEC3 */
+	if (cpu->soc_ver == SVR_P1014) {
+		fdt_del_flexcan(blob);
+		fdt_del_node_and_alias(blob, "ethernet2");
+	}
+
+	/* Delete IFC node as IFC pins are multiplexing with SDHC */
+	if (sd_ifc_mux != MUX_TYPE_IFC)
+		fdt_del_ifc(blob);
+	else
+		fdt_del_sdhc(blob);
+
+	if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
+		fdt_del_tdm(blob);
+		fdt_del_spi_slic(blob);
+	} else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
+		fdt_del_flexcan(blob);
+		fdt_del_spi_flash(blob);
+		fdt_disable_uart1(blob);
+	} else {
+		/*
+		 * If we don't set fsl_p1010mux:tdm_can to "can" or "tdm"
+		 * explicitly, defaultly spi_cs_sel to spi-flash instead of
+		 * to tdm/slic.
+		 */
+		fdt_del_tdm(blob);
+		fdt_del_flexcan(blob);
+		fdt_disable_uart1(blob);
+	}
+}
+#endif
+
+#ifdef CONFIG_SDCARD
+int board_mmc_init(bd_t *bis)
+{
+	config_board_mux(MUX_TYPE_SDHC);
+		return -1;
+}
+#else
+void board_reset(void)
+{
+	/* mux to IFC to enable CPLD for reset */
+	if (sd_ifc_mux != MUX_TYPE_IFC)
+		config_board_mux(MUX_TYPE_IFC);
+}
+#endif
+
+
+int misc_init_r(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+	if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "can")) {
+		clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN1_TDM |
+				MPC85xx_PMUXCR_CAN1_UART |
+				MPC85xx_PMUXCR_CAN2_TDM |
+				MPC85xx_PMUXCR_CAN2_UART);
+		config_board_mux(MUX_TYPE_CAN);
+	} else if (hwconfig_subarg_cmp("fsl_p1010mux", "tdm_can", "tdm")) {
+		clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_UART |
+				MPC85xx_PMUXCR_CAN1_UART);
+		setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_CAN2_TDM |
+				MPC85xx_PMUXCR_CAN1_TDM);
+		clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_GPIO);
+		setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_TDM);
+		config_board_mux(MUX_TYPE_TDM);
+	} else {
+		/* defaultly spi_cs_sel to flash */
+		config_board_mux(MUX_TYPE_SPIFLASH);
+	}
+
+	if (hwconfig("esdhc"))
+		config_board_mux(MUX_TYPE_SDHC);
+	else if (hwconfig("ifc"))
+		config_board_mux(MUX_TYPE_IFC);
+
+#ifdef CONFIG_P1010RDB_PB
+	setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS);
+#endif
+	return 0;
+}
+
+static int pin_mux_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
+				char * const argv[])
+{
+	if (argc < 2)
+		return CMD_RET_USAGE;
+	if (strcmp(argv[1], "ifc") == 0)
+		config_board_mux(MUX_TYPE_IFC);
+	else if (strcmp(argv[1], "sdhc") == 0)
+		config_board_mux(MUX_TYPE_SDHC);
+	else
+		return CMD_RET_USAGE;
+	return 0;
+}
+
+U_BOOT_CMD(
+	mux, 2, 0, pin_mux_cmd,
+	"configure multiplexing pin for IFC/SDHC bus in runtime",
+	"bus_type (e.g. mux sdhc)"
+);