X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Fboard%2Fesd%2Fvme8349%2Fvme8349.c;fp=qemu%2Froms%2Fu-boot%2Fboard%2Fesd%2Fvme8349%2Fvme8349.c;h=01365dcbd3aeddd59013340364aed70fa4b79027;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/roms/u-boot/board/esd/vme8349/vme8349.c b/qemu/roms/u-boot/board/esd/vme8349/vme8349.c new file mode 100644 index 000000000..01365dcbd --- /dev/null +++ b/qemu/roms/u-boot/board/esd/vme8349/vme8349.c @@ -0,0 +1,204 @@ +/* + * vme8349.c -- esd VME8349 board support + * + * Copyright (c) 2008-2009 esd gmbh. + * + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * Reinhard Arlt + * Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.) + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#if defined(CONFIG_OF_LIBFDT) +#include +#endif +#include +#include +#include +#include +#include +#include + +void ddr_enable_ecc(unsigned int dram_size); + +phys_size_t initdram(int board_type) +{ + volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + u32 msize = 0; + + if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im) + return -1; + + /* DDR SDRAM - Main memory */ + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; + + msize = spd_sdram(); + +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) + /* + * Initialize and enable DDR ECC. + */ + ddr_enable_ecc(msize * 1024 * 1024); +#endif + + /* Now check memory size (after ECC is initialized) */ + msize = get_ram_size(0, msize); + + /* return total bus SDRAM size(bytes) -- DDR */ + return msize * 1024 * 1024; +} + +int checkboard(void) +{ +#ifdef VME_CADDY2 + puts("Board: esd VME-CADDY/2\n"); +#else + puts("Board: esd VME-CPU/8349\n"); +#endif + + return 0; +} + +#ifdef VME_CADDY2 +int board_eth_init(bd_t *bis) +{ + return pci_eth_init(bis); +} +#endif + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ + ft_cpu_setup(blob, bd); + +#ifdef CONFIG_PCI + ft_pci_setup(blob, bd); +#endif +} +#endif + +int misc_init_r() +{ + immap_t *im = (immap_t *)CONFIG_SYS_IMMR; + + clrsetbits_be32(&im->im_lbc.lcrr, LBCR_LDIS, 0); + + return 0; +} + +/* + * Provide SPD values for spd_sdram(). Both boards (VME-CADDY/2 + * and VME-CADDY/2) have different SDRAM configurations. + */ +#ifdef VME_CADDY2 +#define SMALL_RAM 0xff +#define LARGE_RAM 0x00 +#else +#define SMALL_RAM 0x00 +#define LARGE_RAM 0xff +#endif + +#define SPD_VAL(a, b) (((a) & SMALL_RAM) | ((b) & LARGE_RAM)) + +static spd_eeprom_t default_spd_eeprom = { + SPD_VAL(0x80, 0x80), /* 00 use 128 Bytes */ + SPD_VAL(0x07, 0x07), /* 01 use 128 Bytes */ + SPD_MEMTYPE_DDR2, /* 02 type is DDR2 */ + SPD_VAL(0x0d, 0x0d), /* 03 rows: 13 */ + SPD_VAL(0x09, 0x0a), /* 04 cols: 9 / 10 */ + SPD_VAL(0x00, 0x00), /* 05 */ + SPD_VAL(0x40, 0x40), /* 06 */ + SPD_VAL(0x00, 0x00), /* 07 */ + SPD_VAL(0x05, 0x05), /* 08 */ + SPD_VAL(0x30, 0x30), /* 09 */ + SPD_VAL(0x45, 0x45), /* 10 */ + SPD_VAL(0x02, 0x02), /* 11 ecc used */ + SPD_VAL(0x82, 0x82), /* 12 */ + SPD_VAL(0x10, 0x10), /* 13 */ + SPD_VAL(0x08, 0x08), /* 14 */ + SPD_VAL(0x00, 0x00), /* 15 */ + SPD_VAL(0x0c, 0x0c), /* 16 */ + SPD_VAL(0x04, 0x08), /* 17 banks: 4 / 8 */ + SPD_VAL(0x38, 0x38), /* 18 */ + SPD_VAL(0x00, 0x00), /* 19 */ + SPD_VAL(0x02, 0x02), /* 20 */ + SPD_VAL(0x00, 0x00), /* 21 */ + SPD_VAL(0x03, 0x03), /* 22 */ + SPD_VAL(0x3d, 0x3d), /* 23 */ + SPD_VAL(0x45, 0x45), /* 24 */ + SPD_VAL(0x50, 0x50), /* 25 */ + SPD_VAL(0x45, 0x45), /* 26 */ + SPD_VAL(0x3c, 0x3c), /* 27 */ + SPD_VAL(0x28, 0x28), /* 28 */ + SPD_VAL(0x3c, 0x3c), /* 29 */ + SPD_VAL(0x2d, 0x2d), /* 30 */ + SPD_VAL(0x20, 0x80), /* 31 */ + SPD_VAL(0x20, 0x20), /* 32 */ + SPD_VAL(0x27, 0x27), /* 33 */ + SPD_VAL(0x10, 0x10), /* 34 */ + SPD_VAL(0x17, 0x17), /* 35 */ + SPD_VAL(0x3c, 0x3c), /* 36 */ + SPD_VAL(0x1e, 0x1e), /* 37 */ + SPD_VAL(0x1e, 0x1e), /* 38 */ + SPD_VAL(0x00, 0x00), /* 39 */ + SPD_VAL(0x00, 0x06), /* 40 */ + SPD_VAL(0x37, 0x37), /* 41 */ + SPD_VAL(0x4b, 0x7f), /* 42 */ + SPD_VAL(0x80, 0x80), /* 43 */ + SPD_VAL(0x18, 0x18), /* 44 */ + SPD_VAL(0x22, 0x22), /* 45 */ + SPD_VAL(0x00, 0x00), /* 46 */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, + SPD_VAL(0x10, 0x10), /* 62 */ + SPD_VAL(0x7e, 0x1d), /* 63 */ + { 'e', 's', 'd', '-', 'g', 'm', 'b', 'h' }, + SPD_VAL(0x00, 0x00), /* 72 */ +#ifdef VME_CADDY2 + { "vme-caddy/2 ram " } +#else + { "vme-cpu/2 ram " } +#endif +}; + +int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len) +{ + int old_bus = i2c_get_bus_num(); + unsigned int l, sum; + int valid = 0; + + i2c_set_bus_num(0); + + if (i2c_read(chip, addr, alen, buffer, len) == 0) + if (memcmp(&buffer[64], &default_spd_eeprom.mid[0], 8) == 0) { + sum = 0; + for (l = 0; l < 63; l++) + sum = (sum + buffer[l]) & 0xff; + if (sum == buffer[63]) + valid = 1; + else + printf("Invalid checksum in EEPROM %02x %02x\n", + sum, buffer[63]); + } + + if (valid == 0) { + memcpy(buffer, (void *)&default_spd_eeprom, len); + sum = 0; + for (l = 0; l < 63; l++) + sum = (sum + buffer[l]) & 0xff; + if (sum != buffer[63]) + printf("Invalid checksum in FLASH %02x %02x\n", + sum, buffer[63]); + buffer[63] = sum; + } + + i2c_set_bus_num(old_bus); + + return 0; +}