X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Fboard%2Fesd%2Fcommon%2Fxilinx_jtag%2Fports.c;fp=qemu%2Froms%2Fu-boot%2Fboard%2Fesd%2Fcommon%2Fxilinx_jtag%2Fports.c;h=d79dbd1e02639cf4fd0e27912d7be3b3497a31aa;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/board/esd/common/xilinx_jtag/ports.c b/qemu/roms/u-boot/board/esd/common/xilinx_jtag/ports.c
new file mode 100644
index 000000000..d79dbd1e0
--- /dev/null
+++ b/qemu/roms/u-boot/board/esd/common/xilinx_jtag/ports.c
@@ -0,0 +1,99 @@
+/*
+ * (C) Copyright 2003
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/*******************************************************/
+/* file: ports.c                                       */
+/* abstract:  This file contains the routines to       */
+/*            output values on the JTAG ports, to read */
+/*            the TDO bit, and to read a byte of data  */
+/*            from the prom                            */
+/*                                                     */
+/*******************************************************/
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#include "ports.h"
+
+static unsigned long output = 0;
+static int filepos = 0;
+static int oldstate = 0;
+static int newstate = 0;
+static int readptr = 0;
+
+extern const unsigned char *xsvfdata;
+
+/* if in debugging mode, then just set the variables */
+void setPort(short p,short val)
+{
+	if (p==TMS) {
+		if (val) {
+			output |= JTAG_TMS;
+		} else {
+			output &= ~JTAG_TMS;
+		}
+	}
+	if (p==TDI) {
+		if (val) {
+			output |= JTAG_TDI;
+		} else {
+			output &= ~JTAG_TDI;
+		}
+	}
+	if (p==TCK) {
+		if (val) {
+			output |= JTAG_TCK;
+		} else {
+			output &= ~JTAG_TCK;
+		}
+		out_be32((void *)GPIO0_OR, output);
+	}
+}
+
+
+/* toggle tck LH */
+void pulseClock(void)
+{
+	setPort(TCK,0);  /* set the TCK port to low  */
+	setPort(TCK,1);  /* set the TCK port to high */
+}
+
+
+/* read in a byte of data from the prom */
+void readByte(unsigned char *data)
+{
+	/* pretend reading using a file */
+	*data = xsvfdata[readptr++];
+	newstate = filepos++ >> 10;
+	if (newstate != oldstate) {
+		printf("%4d kB\r\r\r\r", newstate);
+		oldstate = newstate;
+	}
+}
+
+/* read the TDO bit from port */
+unsigned char readTDOBit(void)
+{
+	unsigned long inputs;
+
+	inputs = in_be32((void *)GPIO0_IR);
+	if (inputs & JTAG_TDO)
+		return 1;
+	else
+		return 0;
+}
+
+
+/* Wait at least the specified number of microsec.                           */
+/* Use a timer if possible; otherwise estimate the number of instructions    */
+/* necessary to be run based on the microcontroller speed.  For this example */
+/* we pulse the TCK port a number of times based on the processor speed.     */
+void waitTime(long microsec)
+{
+	udelay(microsec); /* esd */
+}