X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Flib%2Fboard.c;fp=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Flib%2Fboard.c;h=57b4a09b04e320aed88fad76b80c49c04fee2f04;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/roms/u-boot/arch/powerpc/lib/board.c b/qemu/roms/u-boot/arch/powerpc/lib/board.c new file mode 100644 index 000000000..57b4a09b0 --- /dev/null +++ b/qemu/roms/u-boot/arch/powerpc/lib/board.c @@ -0,0 +1,1025 @@ +/* + * (C) Copyright 2000-2011 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#ifdef CONFIG_8xx +#include +#endif +#ifdef CONFIG_5xx +#include +#endif +#ifdef CONFIG_MPC5xxx +#include +#endif +#if defined(CONFIG_CMD_IDE) +#include +#endif +#if defined(CONFIG_CMD_SCSI) +#include +#endif +#if defined(CONFIG_CMD_KGDB) +#include +#endif +#ifdef CONFIG_STATUS_LED +#include +#endif +#include +#ifdef CONFIG_GENERIC_MMC +#include +#endif +#include +#ifdef CONFIG_SYS_ALLOC_DPRAM +#if !defined(CONFIG_CPM2) +#include +#endif +#endif +#include +#if defined(CONFIG_BAB7xx) +#include +#endif +#include +#if defined(CONFIG_POST) +#include +#endif +#if defined(CONFIG_LOGBUFFER) +#include +#endif +#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500) +#include +#endif +#ifdef CONFIG_PS2KBD +#include +#endif + +#ifdef CONFIG_ADDR_MAP +#include +#endif + +#ifdef CONFIG_MP +#include +#endif + +#ifdef CONFIG_BITBANGMII +#include +#endif + +#ifdef CONFIG_SYS_UPDATE_FLASH_SIZE +extern int update_flash_size(int flash_size); +#endif + +#if defined(CONFIG_SC3) +extern void sc3_read_eeprom(void); +#endif + +#if defined(CONFIG_CMD_DOC) +void doc_init(void); +#endif +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C) +#include +#endif +#include +#include + +static char *failed = "*** failed ***\n"; + +#if defined(CONFIG_OXC) || defined(CONFIG_RMU) +extern flash_info_t flash_info[]; +#endif + +#if defined(CONFIG_START_IDE) +extern int board_start_ide(void); +#endif +#include + +DECLARE_GLOBAL_DATA_PTR; + +#if !defined(CONFIG_SYS_MEM_TOP_HIDE) +#define CONFIG_SYS_MEM_TOP_HIDE 0 +#endif + +extern ulong __init_end; +extern ulong __bss_end; +ulong monitor_flash_len; + +#if defined(CONFIG_CMD_BEDBUG) +#include +#endif + +/* + * Utilities + */ + +/* + * All attempts to come up with a "common" initialization sequence + * that works for all boards and architectures failed: some of the + * requirements are just _too_ different. To get rid of the resulting + * mess of board dependend #ifdef'ed code we now make the whole + * initialization sequence configurable to the user. + * + * The requirements for any new initalization function is simple: it + * receives a pointer to the "global data" structure as it's only + * argument, and returns an integer return code, where 0 means + * "continue" and != 0 means "fatal error, hang the system". + */ +typedef int (init_fnc_t)(void); + +/* + * Init Utilities + * + * Some of this code should be moved into the core functions, + * but let's get it working (again) first... + */ + +static int init_baudrate(void) +{ + gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); + return 0; +} + +/***********************************************************************/ + +static void __board_add_ram_info(int use_default) +{ + /* please define platform specific board_add_ram_info() */ +} + +void board_add_ram_info(int) + __attribute__ ((weak, alias("__board_add_ram_info"))); + +static int __board_flash_wp_on(void) +{ + /* + * Most flashes can't be detected when write protection is enabled, + * so provide a way to let U-Boot gracefully ignore write protected + * devices. + */ + return 0; +} + +int board_flash_wp_on(void) + __attribute__ ((weak, alias("__board_flash_wp_on"))); + +static void __cpu_secondary_init_r(void) +{ +} + +void cpu_secondary_init_r(void) + __attribute__ ((weak, alias("__cpu_secondary_init_r"))); + +static int init_func_ram(void) +{ +#ifdef CONFIG_BOARD_TYPES + int board_type = gd->board_type; +#else + int board_type = 0; /* use dummy arg */ +#endif + puts("DRAM: "); + + gd->ram_size = initdram(board_type); + + if (gd->ram_size > 0) { + print_size(gd->ram_size, ""); + board_add_ram_info(0); + putc('\n'); + return 0; + } + puts(failed); + return 1; +} + +/***********************************************************************/ + +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C) +static int init_func_i2c(void) +{ + puts("I2C: "); +#ifdef CONFIG_SYS_I2C + i2c_init_all(); +#else + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif + puts("ready\n"); + return 0; +} +#endif + +#if defined(CONFIG_HARD_SPI) +static int init_func_spi(void) +{ + puts("SPI: "); + spi_init(); + puts("ready\n"); + return 0; +} +#endif + +/***********************************************************************/ + +#if defined(CONFIG_WATCHDOG) +int init_func_watchdog_init(void) +{ + puts(" Watchdog enabled\n"); + WATCHDOG_RESET(); + return 0; +} + +int init_func_watchdog_reset(void) +{ + WATCHDOG_RESET(); + return 0; +} +#endif /* CONFIG_WATCHDOG */ + +/* + * Initialization sequence + */ + +static init_fnc_t *init_sequence[] = { +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) + probecpu, +#endif +#if defined(CONFIG_BOARD_EARLY_INIT_F) + board_early_init_f, +#endif +#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) + get_clocks, /* get CPU and bus clocks (etc.) */ +#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \ + && !defined(CONFIG_TQM885D) + adjust_sdram_tbs_8xx, +#endif + init_timebase, +#endif +#ifdef CONFIG_SYS_ALLOC_DPRAM +#if !defined(CONFIG_CPM2) + dpram_init, +#endif +#endif +#if defined(CONFIG_BOARD_POSTCLK_INIT) + board_postclk_init, +#endif + env_init, +#if defined(CONFIG_8xx_CPUCLK_DEFAULT) + /* get CPU and bus clocks according to the environment variable */ + get_clocks_866, + /* adjust sdram refresh rate according to the new clock */ + sdram_adjust_866, + init_timebase, +#endif + init_baudrate, + serial_init, + console_init_f, + display_options, +#if defined(CONFIG_MPC8260) + prt_8260_rsr, + prt_8260_clks, +#endif /* CONFIG_MPC8260 */ +#if defined(CONFIG_MPC83xx) + prt_83xx_rsr, +#endif + checkcpu, +#if defined(CONFIG_MPC5xxx) + prt_mpc5xxx_clks, +#endif /* CONFIG_MPC5xxx */ + checkboard, + INIT_FUNC_WATCHDOG_INIT +#if defined(CONFIG_MISC_INIT_F) + misc_init_f, +#endif + INIT_FUNC_WATCHDOG_RESET +#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C) + init_func_i2c, +#endif +#if defined(CONFIG_HARD_SPI) + init_func_spi, +#endif +#ifdef CONFIG_POST + post_init_f, +#endif + INIT_FUNC_WATCHDOG_RESET + init_func_ram, +#if defined(CONFIG_SYS_DRAM_TEST) + testdram, +#endif /* CONFIG_SYS_DRAM_TEST */ + INIT_FUNC_WATCHDOG_RESET + NULL, /* Terminate this list */ +}; + +static int __fixup_cpu(void) +{ + return 0; +} + +int fixup_cpu(void) __attribute__((weak, alias("__fixup_cpu"))); + +/* + * This is the first part of the initialization sequence that is + * implemented in C, but still running from ROM. + * + * The main purpose is to provide a (serial) console interface as + * soon as possible (so we can see any error messages), and to + * initialize the RAM so that we can relocate the monitor code to + * RAM. + * + * Be aware of the restrictions: global data is read-only, BSS is not + * initialized, and stack space is limited to a few kB. + */ + +void board_init_f(ulong bootflag) +{ + bd_t *bd; + ulong len, addr, addr_sp; + ulong *s; + gd_t *id; + init_fnc_t **init_fnc_ptr; + +#ifdef CONFIG_PRAM + ulong reg; +#endif +#ifdef CONFIG_DEEP_SLEEP + const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + struct ccsr_scfg *scfg = (void *)CONFIG_SYS_MPC85xx_SCFG; + u32 start_addr; + typedef void (*func_t)(void); + func_t kernel_resume; +#endif + + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + /* compiler optimization barrier needed for GCC >= 3.4 */ + __asm__ __volatile__("":::"memory"); + +#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \ + !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \ + !defined(CONFIG_MPC86xx) + /* Clear initial global data */ + memset((void *) gd, 0, sizeof(gd_t)); +#endif + + for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) + if ((*init_fnc_ptr) () != 0) + hang(); + +#ifdef CONFIG_DEEP_SLEEP + /* Jump to kernel in deep sleep case */ + if (in_be32(&gur->scrtsr[0]) & (1 << 3)) { + start_addr = in_be32(&scfg->sparecr[1]); + kernel_resume = (func_t)start_addr; + kernel_resume(); + } +#endif + +#ifdef CONFIG_POST + post_bootmode_init(); + post_run(NULL, POST_ROM | post_bootmode_get(NULL)); +#endif + + WATCHDOG_RESET(); + + /* + * Now that we have DRAM mapped and working, we can + * relocate the code and continue running from DRAM. + * + * Reserve memory at end of RAM for (top down in that order): + * - area that won't get touched by U-Boot and Linux (optional) + * - kernel log buffer + * - protected RAM + * - LCD framebuffer + * - monitor code + * - board info struct + */ + len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE; + + /* + * Subtract specified amount of memory to hide so that it won't + * get "touched" at all by U-Boot. By fixing up gd->ram_size + * the Linux kernel should now get passed the now "corrected" + * memory size and won't touch it either. This should work + * for arch/ppc and arch/powerpc. Only Linux board ports in + * arch/powerpc with bootwrapper support, that recalculate the + * memory size from the SDRAM controller setup will have to + * get fixed. + */ + gd->ram_size -= CONFIG_SYS_MEM_TOP_HIDE; + + addr = CONFIG_SYS_SDRAM_BASE + get_effective_memsize(); + +#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500)) + /* + * We need to make sure the location we intend to put secondary core + * boot code is reserved and not used by any part of u-boot + */ + if (addr > determine_mp_bootpg(NULL)) { + addr = determine_mp_bootpg(NULL); + debug("Reserving MP boot page to %08lx\n", addr); + } +#endif + +#ifdef CONFIG_LOGBUFFER +#ifndef CONFIG_ALT_LB_ADDR + /* reserve kernel log buffer */ + addr -= (LOGBUFF_RESERVE); + debug("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, + addr); +#endif +#endif + +#ifdef CONFIG_PRAM + /* + * reserve protected RAM + */ + reg = getenv_ulong("pram", 10, CONFIG_PRAM); + addr -= (reg << 10); /* size is in kB */ + debug("Reserving %ldk for protected RAM at %08lx\n", reg, addr); +#endif /* CONFIG_PRAM */ + + /* round down to next 4 kB limit */ + addr &= ~(4096 - 1); + debug("Top of RAM usable for U-Boot at: %08lx\n", addr); + +#ifdef CONFIG_LCD +#ifdef CONFIG_FB_ADDR + gd->fb_base = CONFIG_FB_ADDR; +#else + /* reserve memory for LCD display (always full pages) */ + addr = lcd_setmem(addr); + gd->fb_base = addr; +#endif /* CONFIG_FB_ADDR */ +#endif /* CONFIG_LCD */ + +#if defined(CONFIG_VIDEO) && defined(CONFIG_8xx) + /* reserve memory for video display (always full pages) */ + addr = video_setmem(addr); + gd->fb_base = addr; +#endif /* CONFIG_VIDEO */ + + /* + * reserve memory for U-Boot code, data & bss + * round down to next 4 kB limit + */ + addr -= len; + addr &= ~(4096 - 1); +#ifdef CONFIG_E500 + /* round down to next 64 kB limit so that IVPR stays aligned */ + addr &= ~(65536 - 1); +#endif + + debug("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr); + + /* + * reserve memory for malloc() arena + */ + addr_sp = addr - TOTAL_MALLOC_LEN; + debug("Reserving %dk for malloc() at: %08lx\n", + TOTAL_MALLOC_LEN >> 10, addr_sp); + + /* + * (permanently) allocate a Board Info struct + * and a permanent copy of the "global" data + */ + addr_sp -= sizeof(bd_t); + bd = (bd_t *) addr_sp; + memset(bd, 0, sizeof(bd_t)); + gd->bd = bd; + debug("Reserving %zu Bytes for Board Info at: %08lx\n", + sizeof(bd_t), addr_sp); + addr_sp -= sizeof(gd_t); + id = (gd_t *) addr_sp; + debug("Reserving %zu Bytes for Global Data at: %08lx\n", + sizeof(gd_t), addr_sp); + + /* + * Finally, we set up a new (bigger) stack. + * + * Leave some safety gap for SP, force alignment on 16 byte boundary + * Clear initial stack frame + */ + addr_sp -= 16; + addr_sp &= ~0xF; + s = (ulong *) addr_sp; + *s = 0; /* Terminate back chain */ + *++s = 0; /* NULL return address */ + debug("Stack Pointer at: %08lx\n", addr_sp); + + /* + * Save local variables to board info struct + */ + + bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of memory */ + bd->bi_memsize = gd->ram_size; /* size in bytes */ + +#ifdef CONFIG_SYS_SRAM_BASE + bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; /* start of SRAM */ + bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; /* size of SRAM */ +#endif + +#if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) || defined(CONFIG_5xx) || \ + defined(CONFIG_E500) || defined(CONFIG_MPC86xx) + bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ +#endif +#if defined(CONFIG_MPC5xxx) + bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ +#endif +#if defined(CONFIG_MPC83xx) + bd->bi_immrbar = CONFIG_SYS_IMMR; +#endif + + WATCHDOG_RESET(); + bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ + bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ +#if defined(CONFIG_CPM2) + bd->bi_cpmfreq = gd->arch.cpm_clk; + bd->bi_brgfreq = gd->arch.brg_clk; + bd->bi_sccfreq = gd->arch.scc_clk; + bd->bi_vco = gd->arch.vco_out; +#endif /* CONFIG_CPM2 */ +#if defined(CONFIG_MPC512X) + bd->bi_ipsfreq = gd->arch.ips_clk; +#endif /* CONFIG_MPC512X */ +#if defined(CONFIG_MPC5xxx) + bd->bi_ipbfreq = gd->arch.ipb_clk; + bd->bi_pcifreq = gd->pci_clk; +#endif /* CONFIG_MPC5xxx */ + +#ifdef CONFIG_SYS_EXTBDINFO + strncpy((char *) bd->bi_s_version, "1.2", sizeof(bd->bi_s_version)); + strncpy((char *) bd->bi_r_version, U_BOOT_VERSION, + sizeof(bd->bi_r_version)); + + bd->bi_procfreq = gd->cpu_clk; /* Processor Speed, In Hz */ + bd->bi_plb_busfreq = gd->bus_clk; +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \ + defined(CONFIG_440EP) || defined(CONFIG_440GR) || \ + defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + bd->bi_pci_busfreq = get_PCI_freq(); + bd->bi_opbfreq = get_OPB_freq(); +#elif defined(CONFIG_XILINX_405) + bd->bi_pci_busfreq = get_PCI_freq(); +#endif +#endif + + debug("New Stack Pointer is: %08lx\n", addr_sp); + + WATCHDOG_RESET(); + + gd->relocaddr = addr; /* Store relocation addr, useful for debug */ + + memcpy(id, (void *) gd, sizeof(gd_t)); + + relocate_code(addr_sp, id, addr); + + /* NOTREACHED - relocate_code() does not return */ +} + +/* + * This is the next part if the initialization sequence: we are now + * running from RAM and have a "normal" C environment, i. e. global + * data can be written, BSS has been cleared, the stack size in not + * that critical any more, etc. + */ +void board_init_r(gd_t *id, ulong dest_addr) +{ + bd_t *bd; + ulong malloc_start; + +#ifndef CONFIG_SYS_NO_FLASH + ulong flash_size; +#endif + + gd = id; /* initialize RAM version of global data */ + bd = gd->bd; + + gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ + + /* The Malloc area is immediately below the monitor copy in DRAM */ + malloc_start = dest_addr - TOTAL_MALLOC_LEN; + +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) + /* + * The gd->arch.cpu pointer is set to an address in flash before + * relocation. We need to update it to point to the same CPU entry + * in RAM. + */ + gd->arch.cpu += dest_addr - CONFIG_SYS_MONITOR_BASE; + + /* + * If we didn't know the cpu mask & # cores, we can save them of + * now rather than 'computing' them constantly + */ + fixup_cpu(); +#endif + +#ifdef CONFIG_SYS_EXTRA_ENV_RELOC + /* + * Some systems need to relocate the env_addr pointer early because the + * location it points to will get invalidated before env_relocate is + * called. One example is on systems that might use a L2 or L3 cache + * in SRAM mode and initialize that cache from SRAM mode back to being + * a cache in cpu_init_r. + */ + gd->env_addr += dest_addr - CONFIG_SYS_MONITOR_BASE; +#endif + + serial_initialize(); + + debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr); + + WATCHDOG_RESET(); + + /* + * Setup trap handlers + */ + trap_init(dest_addr); + +#ifdef CONFIG_ADDR_MAP + init_addr_map(); +#endif + +#if defined(CONFIG_BOARD_EARLY_INIT_R) + board_early_init_r(); +#endif + + monitor_flash_len = (ulong)&__init_end - dest_addr; + + WATCHDOG_RESET(); + +#ifdef CONFIG_LOGBUFFER + logbuff_init_ptrs(); +#endif +#ifdef CONFIG_POST + post_output_backlog(); +#endif + + WATCHDOG_RESET(); + +#if defined(CONFIG_SYS_DELAYED_ICACHE) + icache_enable(); /* it's time to enable the instruction cache */ +#endif + +#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500) + unlock_ram_in_cache(); /* it's time to unlock D-cache in e500 */ +#endif + +#if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT) + /* + * Do early PCI configuration _before_ the flash gets initialised, + * because PCU ressources are crucial for flash access on some boards. + */ + pci_init(); +#endif +#if defined(CONFIG_WINBOND_83C553) + /* + * Initialise the ISA bridge + */ + initialise_w83c553f(); +#endif + + asm("sync ; isync"); + + mem_malloc_init(malloc_start, TOTAL_MALLOC_LEN); + +#if !defined(CONFIG_SYS_NO_FLASH) + puts("Flash: "); + + if (board_flash_wp_on()) { + printf("Uninitialized - Write Protect On\n"); + /* Since WP is on, we can't find real size. Set to 0 */ + flash_size = 0; + } else if ((flash_size = flash_init()) > 0) { +#ifdef CONFIG_SYS_FLASH_CHECKSUM + print_size(flash_size, ""); + /* + * Compute and print flash CRC if flashchecksum is set to 'y' + * + * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX + */ + if (getenv_yesno("flashchecksum") == 1) { + printf(" CRC: %08X", + crc32(0, + (const unsigned char *) + CONFIG_SYS_FLASH_BASE, flash_size) + ); + } + putc('\n'); +#else /* !CONFIG_SYS_FLASH_CHECKSUM */ + print_size(flash_size, "\n"); +#endif /* CONFIG_SYS_FLASH_CHECKSUM */ + } else { + puts(failed); + hang(); + } + + /* update start of FLASH memory */ + bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; + /* size of FLASH memory (final value) */ + bd->bi_flashsize = flash_size; + +#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE) + /* Make a update of the Memctrl. */ + update_flash_size(flash_size); +#endif + + +#if defined(CONFIG_OXC) || defined(CONFIG_RMU) + /* flash mapped at end of memory map */ + bd->bi_flashoffset = CONFIG_SYS_TEXT_BASE + flash_size; +#elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE + bd->bi_flashoffset = monitor_flash_len; /* reserved area for monitor */ +#endif +#endif /* !CONFIG_SYS_NO_FLASH */ + + WATCHDOG_RESET(); + + /* initialize higher level parts of CPU like time base and timers */ + cpu_init_r(); + + WATCHDOG_RESET(); + +#ifdef CONFIG_SPI +#if !defined(CONFIG_ENV_IS_IN_EEPROM) + spi_init_f(); +#endif + spi_init_r(); +#endif + +#if defined(CONFIG_CMD_NAND) + WATCHDOG_RESET(); + puts("NAND: "); + nand_init(); /* go init the NAND */ +#endif + +#ifdef CONFIG_GENERIC_MMC +/* + * MMC initialization is called before relocating env. + * Thus It is required that operations like pin multiplexer + * be put in board_init. + */ + WATCHDOG_RESET(); + puts("MMC: "); + mmc_initialize(bd); +#endif + + /* relocate environment function pointers etc. */ + env_relocate(); + + /* + * after non-volatile devices & environment is setup and cpu code have + * another round to deal with any initialization that might require + * full access to the environment or loading of some image (firmware) + * from a non-volatile device + */ + cpu_secondary_init_r(); + + /* + * Fill in missing fields of bd_info. + * We do this here, where we have "normal" access to the + * environment; we used to do this still running from ROM, + * where had to use getenv_f(), which can be pretty slow when + * the environment is in EEPROM. + */ + +#if defined(CONFIG_SYS_EXTBDINFO) +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) +#if defined(CONFIG_I2CFAST) + /* + * set bi_iic_fast for linux taking environment variable + * "i2cfast" into account + */ + { + if (getenv_yesno("i2cfast") == 1) { + bd->bi_iic_fast[0] = 1; + bd->bi_iic_fast[1] = 1; + } + } +#endif /* CONFIG_I2CFAST */ +#endif /* CONFIG_405GP, CONFIG_405EP */ +#endif /* CONFIG_SYS_EXTBDINFO */ + +#if defined(CONFIG_SC3) + sc3_read_eeprom(); +#endif + +#if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET) + mac_read_from_eeprom(); +#endif + +#ifdef CONFIG_HERMES + if ((gd->board_type >> 16) == 2) + bd->bi_ethspeed = gd->board_type & 0xFFFF; + else + bd->bi_ethspeed = 0xFFFF; +#endif + +#ifdef CONFIG_CMD_NET + /* kept around for legacy kernels only ... ignore the next section */ + eth_getenv_enetaddr("ethaddr", bd->bi_enetaddr); +#ifdef CONFIG_HAS_ETH1 + eth_getenv_enetaddr("eth1addr", bd->bi_enet1addr); +#endif +#ifdef CONFIG_HAS_ETH2 + eth_getenv_enetaddr("eth2addr", bd->bi_enet2addr); +#endif +#ifdef CONFIG_HAS_ETH3 + eth_getenv_enetaddr("eth3addr", bd->bi_enet3addr); +#endif +#ifdef CONFIG_HAS_ETH4 + eth_getenv_enetaddr("eth4addr", bd->bi_enet4addr); +#endif +#ifdef CONFIG_HAS_ETH5 + eth_getenv_enetaddr("eth5addr", bd->bi_enet5addr); +#endif +#endif /* CONFIG_CMD_NET */ + + WATCHDOG_RESET(); + +#if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT) + /* + * Do pci configuration + */ + pci_init(); +#endif + +/** leave this here (after malloc(), environment and PCI are working) **/ + /* Initialize stdio devices */ + stdio_init(); + + /* Initialize the jump table for applications */ + jumptable_init(); + +#if defined(CONFIG_API) + /* Initialize API */ + api_init(); +#endif + + /* Initialize the console (after the relocation and devices init) */ + console_init_r(); + +#if defined(CONFIG_MISC_INIT_R) + /* miscellaneous platform dependent initialisations */ + misc_init_r(); +#endif + +#ifdef CONFIG_HERMES + if (bd->bi_ethspeed != 0xFFFF) + hermes_start_lxt980((int) bd->bi_ethspeed); +#endif + +#if defined(CONFIG_CMD_KGDB) + WATCHDOG_RESET(); + puts("KGDB: "); + kgdb_init(); +#endif + + debug("U-Boot relocated to %08lx\n", dest_addr); + + /* + * Enable Interrupts + */ + interrupt_init(); + +#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT) + status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING); +#endif + + udelay(20); + + /* Initialize from environment */ + load_addr = getenv_ulong("loadaddr", 16, load_addr); + + WATCHDOG_RESET(); + +#if defined(CONFIG_CMD_SCSI) + WATCHDOG_RESET(); + puts("SCSI: "); + scsi_init(); +#endif + +#if defined(CONFIG_CMD_DOC) + WATCHDOG_RESET(); + puts("DOC: "); + doc_init(); +#endif + +#ifdef CONFIG_BITBANGMII + bb_miiphy_init(); +#endif +#if defined(CONFIG_CMD_NET) + WATCHDOG_RESET(); + puts("Net: "); + eth_initialize(bd); +#endif + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) + WATCHDOG_RESET(); + debug("Reset Ethernet PHY\n"); + reset_phy(); +#endif + +#ifdef CONFIG_POST + post_run(NULL, POST_RAM | post_bootmode_get(0)); +#endif + +#if defined(CONFIG_CMD_PCMCIA) \ + && !defined(CONFIG_CMD_IDE) + WATCHDOG_RESET(); + puts("PCMCIA:"); + pcmcia_init(); +#endif + +#if defined(CONFIG_CMD_IDE) + WATCHDOG_RESET(); +#ifdef CONFIG_IDE_8xx_PCCARD + puts("PCMCIA:"); +#else + puts("IDE: "); +#endif +#if defined(CONFIG_START_IDE) + if (board_start_ide()) + ide_init(); +#else + ide_init(); +#endif +#endif + +#ifdef CONFIG_LAST_STAGE_INIT + WATCHDOG_RESET(); + /* + * Some parts can be only initialized if all others (like + * Interrupts) are up and running (i.e. the PC-style ISA + * keyboard). + */ + last_stage_init(); +#endif + +#if defined(CONFIG_CMD_BEDBUG) + WATCHDOG_RESET(); + bedbug_init(); +#endif + +#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER) + /* + * Export available size of memory for Linux, + * taking into account the protected RAM at top of memory + */ + { + ulong pram = 0; + char memsz[32]; + +#ifdef CONFIG_PRAM + pram = getenv_ulong("pram", 10, CONFIG_PRAM); +#endif +#ifdef CONFIG_LOGBUFFER +#ifndef CONFIG_ALT_LB_ADDR + /* Also take the logbuffer into account (pram is in kB) */ + pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024; +#endif +#endif + sprintf(memsz, "%ldk", (ulong) (bd->bi_memsize / 1024) - pram); + setenv("mem", memsz); + } +#endif + +#ifdef CONFIG_PS2KBD + puts("PS/2: "); + kbd_init(); +#endif + +#ifdef CONFIG_MODEM_SUPPORT + { + extern int do_mdm_init; + + do_mdm_init = gd->do_mdm_init; + } +#endif + + /* Initialization complete - start the monitor */ + + /* main_loop() can return to retry autoboot, if so just run it again. */ + for (;;) { + WATCHDOG_RESET(); + main_loop(); + } + + /* NOTREACHED - no way out of command loop except booting */ +} + +#if 0 /* We could use plain global data, but the resulting code is bigger */ +/* + * Pointer to initial global data area + * + * Here we initialize it. + */ +#undef XTRN_DECLARE_GLOBAL_DATA_PTR +#define XTRN_DECLARE_GLOBAL_DATA_PTR /* empty = allocate here */ +DECLARE_GLOBAL_DATA_PTR = + (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); +#endif /* 0 */ + +/************************************************************************/