X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Finclude%2Fasm%2Fu-boot.h;fp=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Finclude%2Fasm%2Fu-boot.h;h=e1b566fa568b1fcab53634e388b64d834efa061e;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/arch/powerpc/include/asm/u-boot.h b/qemu/roms/u-boot/arch/powerpc/include/asm/u-boot.h
new file mode 100644
index 000000000..e1b566fa5
--- /dev/null
+++ b/qemu/roms/u-boot/arch/powerpc/include/asm/u-boot.h
@@ -0,0 +1,130 @@
+/*
+ * (C) Copyright 2000 - 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ ********************************************************************
+ * NOTE: This header file defines an interface to U-Boot. Including
+ * this (unmodified) header file in another file is considered normal
+ * use of U-Boot, and does *not* fall under the heading of "derived
+ * work".
+ ********************************************************************
+ */
+
+#ifndef __U_BOOT_H__
+#define __U_BOOT_H__
+
+/*
+ * Board information passed to Linux kernel from U-Boot
+ *
+ * include/asm-ppc/u-boot.h
+ */
+
+#ifdef CONFIG_SYS_GENERIC_BOARD
+/* Use the generic board which requires a unified bd_info */
+#include <asm-generic/u-boot.h>
+#else
+
+#ifndef __ASSEMBLY__
+
+typedef struct bd_info {
+	unsigned long	bi_memstart;	/* start of DRAM memory */
+	phys_size_t	bi_memsize;	/* size	 of DRAM memory in bytes */
+	unsigned long	bi_flashstart;	/* start of FLASH memory */
+	unsigned long	bi_flashsize;	/* size	 of FLASH memory */
+	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
+	unsigned long	bi_sramstart;	/* start of SRAM memory */
+	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
+#if defined(CONFIG_5xx) || defined(CONFIG_8xx) || defined(CONFIG_MPC8260) \
+	|| defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
+	unsigned long	bi_immr_base;	/* base of IMMR register */
+#endif
+#if defined(CONFIG_MPC5xxx)
+	unsigned long	bi_mbar_base;	/* base of internal registers */
+#endif
+#if defined(CONFIG_MPC83xx)
+	unsigned long	bi_immrbar;
+#endif
+	unsigned long	bi_bootflags;	/* boot / reboot flag (Unused) */
+	unsigned long	bi_ip_addr;	/* IP Address */
+	unsigned char	bi_enetaddr[6];	/* OLD: see README.enetaddr */
+	unsigned short	bi_ethspeed;	/* Ethernet speed in Mbps */
+	unsigned long	bi_intfreq;	/* Internal Freq, in MHz */
+	unsigned long	bi_busfreq;	/* Bus Freq, in MHz */
+#if defined(CONFIG_CPM2)
+	unsigned long	bi_cpmfreq;	/* CPM_CLK Freq, in MHz */
+	unsigned long	bi_brgfreq;	/* BRG_CLK Freq, in MHz */
+	unsigned long	bi_sccfreq;	/* SCC_CLK Freq, in MHz */
+	unsigned long	bi_vco;		/* VCO Out from PLL, in MHz */
+#endif
+#if defined(CONFIG_MPC512X)
+	unsigned long	bi_ipsfreq;	/* IPS Bus Freq, in MHz */
+#endif /* CONFIG_MPC512X */
+#if defined(CONFIG_MPC5xxx)
+	unsigned long	bi_ipbfreq;	/* IPB Bus Freq, in MHz */
+	unsigned long	bi_pcifreq;	/* PCI Bus Freq, in MHz */
+#endif
+#if defined(CONFIG_405)   || \
+    defined(CONFIG_405GP) || \
+    defined(CONFIG_405EP) || \
+    defined(CONFIG_405EZ) || \
+    defined(CONFIG_405EX) || \
+    defined(CONFIG_440)
+	unsigned char	bi_s_version[4];	/* Version of this structure */
+	unsigned char	bi_r_version[32];	/* Version of the ROM (AMCC) */
+	unsigned int	bi_procfreq;	/* CPU (Internal) Freq, in Hz */
+	unsigned int	bi_plb_busfreq;	/* PLB Bus speed, in Hz */
+	unsigned int	bi_pci_busfreq;	/* PCI Bus speed, in Hz */
+	unsigned char	bi_pci_enetaddr[6];	/* PCI Ethernet MAC address */
+#endif
+#if defined(CONFIG_HYMOD)
+	hymod_conf_t	bi_hymod_conf;	/* hymod configuration information */
+#endif
+
+#ifdef CONFIG_HAS_ETH1
+	unsigned char   bi_enet1addr[6];	/* OLD: see README.enetaddr */
+#endif
+#ifdef CONFIG_HAS_ETH2
+	unsigned char	bi_enet2addr[6];	/* OLD: see README.enetaddr */
+#endif
+#ifdef CONFIG_HAS_ETH3
+	unsigned char   bi_enet3addr[6];	/* OLD: see README.enetaddr */
+#endif
+#ifdef CONFIG_HAS_ETH4
+	unsigned char   bi_enet4addr[6];	/* OLD: see README.enetaddr */
+#endif
+#ifdef CONFIG_HAS_ETH5
+	unsigned char   bi_enet5addr[6];	/* OLD: see README.enetaddr */
+#endif
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405EP) || \
+    defined(CONFIG_405EZ) || defined(CONFIG_440GX) || \
+    defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
+    defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
+    defined(CONFIG_460EX) || defined(CONFIG_460GT)
+	unsigned int	bi_opbfreq;		/* OPB clock in Hz */
+	int		bi_iic_fast[2];		/* Use fast i2c mode */
+#endif
+#if defined(CONFIG_4xx)
+#if defined(CONFIG_440GX) || \
+    defined(CONFIG_460EX) || defined(CONFIG_460GT)
+	int		bi_phynum[4];           /* Determines phy mapping */
+	int		bi_phymode[4];          /* Determines phy mode */
+#elif defined(CONFIG_405EP) || defined(CONFIG_405EX) || defined(CONFIG_440)
+	int		bi_phynum[2];           /* Determines phy mapping */
+	int		bi_phymode[2];          /* Determines phy mode */
+#else
+	int		bi_phynum[1];           /* Determines phy mapping */
+	int		bi_phymode[1];          /* Determines phy mode */
+#endif
+#endif /* defined(CONFIG_4xx) */
+} bd_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* !CONFIG_SYS_GENERIC_BOARD */
+
+/* For image.h:image_check_target_arch() */
+#define IH_ARCH_DEFAULT IH_ARCH_PPC
+
+#endif	/* __U_BOOT_H__ */