X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Finclude%2Fasm%2Fppc405ex.h;fp=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Finclude%2Fasm%2Fppc405ex.h;h=083405ccb6b2caab9e7ff2dfc36256487af8bb33;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/arch/powerpc/include/asm/ppc405ex.h b/qemu/roms/u-boot/arch/powerpc/include/asm/ppc405ex.h
new file mode 100644
index 000000000..083405ccb
--- /dev/null
+++ b/qemu/roms/u-boot/arch/powerpc/include/asm/ppc405ex.h
@@ -0,0 +1,82 @@
+/*
+ * (C) Copyright 2010
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _PPC405EX_H_
+#define _PPC405EX_H_
+
+#define CONFIG_SDRAM_PPC4xx_IBM_DDR2	/* IBM DDR(2) controller */
+
+#define CONFIG_NAND_NDFC
+
+/* Memory mapped register */
+#define CONFIG_SYS_PERIPHERAL_BASE	0xef600000 /* Internal Peripherals */
+
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_PERIPHERAL_BASE + 0x0200)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
+
+#define GPIO0_BASE		(CONFIG_SYS_PERIPHERAL_BASE + 0x0800)
+
+/* SDR */
+#define SDR0_SDCS0		0x0060
+#define SDR0_UART0		0x0120	/* UART0 Config */
+#define SDR0_UART1		0x0121	/* UART1 Config */
+#define SDR0_SRST		0x0200
+#define SDR0_CUST0		0x4000
+#define SDR0_PFC0		0x4100
+#define SDR0_PFC1		0x4101
+#define SDR0_MFR		0x4300	/* SDR0_MFR reg */
+
+#define SDR0_ECID0		0x0080
+#define SDR0_ECID1		0x0081
+#define SDR0_ECID2		0x0082
+#define SDR0_ECID3		0x0083
+
+#define SDR0_SDCS_SDD		(0x80000000 >> 31)
+
+#define SDR0_SRST_DMC		(0x80000000 >> 10)
+
+#define SDR0_CUST0_MUX_E_N_G_MASK	0xC0000000 /* Mux_Emac_NDFC_GPIO */
+#define SDR0_CUST0_MUX_EMAC_SEL		0x40000000 /* Emac Selection */
+#define SDR0_CUST0_MUX_NDFC_SEL		0x80000000 /* NDFC Selection */
+#define SDR0_CUST0_MUX_GPIO_SEL		0xC0000000 /* GPIO Selection */
+
+#define SDR0_CUST0_NDFC_EN_MASK		0x20000000 /* NDFC Enable Mask */
+#define SDR0_CUST0_NDFC_ENABLE		0x20000000 /* NDFC Enable */
+#define SDR0_CUST0_NDFC_DISABLE		0x00000000 /* NDFC Disable */
+
+#define SDR0_CUST0_NDFC_BW_MASK	  	0x10000000 /* NDFC Boot Width */
+#define SDR0_CUST0_NDFC_BW_16_BIT 	0x10000000 /* NDFC Boot Width= 16 Bit */
+#define SDR0_CUST0_NDFC_BW_8_BIT  	0x00000000 /* NDFC Boot Width=  8 Bit */
+
+#define SDR0_CUST0_NDFC_BP_MASK		0x0F000000 /* NDFC Boot Page */
+#define SDR0_CUST0_NDFC_BP_ENCODE(n)	((((u32)(n)) & 0xF) << 24)
+#define SDR0_CUST0_NDFC_BP_DECODE(n)	((((u32)(n)) >> 24) & 0xF)
+
+#define SDR0_CUST0_NDFC_BAC_MASK	0x00C00000 /* NDFC Boot Address Cycle */
+#define SDR0_CUST0_NDFC_BAC_ENCODE(n)	((((u32)(n)) & 0x3) << 22)
+#define SDR0_CUST0_NDFC_BAC_DECODE(n)	((((u32)(n)) >> 22) & 0x3)
+
+#define SDR0_CUST0_NDFC_ARE_MASK	0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_ENABLE	0x00200000 /* NDFC Auto Read Enable */
+#define SDR0_CUST0_NDFC_ARE_DISABLE	0x00000000 /* NDFC Auto Read Disable */
+
+#define SDR0_CUST0_NRB_MASK		0x00100000 /* NDFC Ready / Busy */
+#define SDR0_CUST0_NRB_BUSY		0x00100000 /* Busy */
+#define SDR0_CUST0_NRB_READY		0x00000000 /* Ready */
+
+#define SDR0_PFC1_U1ME			0x02000000
+#define SDR0_PFC1_U0ME			0x00080000
+#define SDR0_PFC1_U0IM			0x00040000
+#define SDR0_PFC1_SIS			0x00020000
+#define SDR0_PFC1_DMAAEN		0x00010000
+#define SDR0_PFC1_DMADEN		0x00008000
+#define SDR0_PFC1_USBEN			0x00004000
+#define SDR0_PFC1_AHBSWAP		0x00000020
+#define SDR0_PFC1_USBBIGEN		0x00000010
+#define SDR0_PFC1_GPT_FREQ		0x0000000f
+
+#endif /* _PPC405EX_H_ */