X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Fcpu%2Fppc4xx%2Fsdram.c;fp=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Fcpu%2Fppc4xx%2Fsdram.c;h=d4ef36d39ffc6f335e34ff7a2ec5c9089326579d;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/arch/powerpc/cpu/ppc4xx/sdram.c b/qemu/roms/u-boot/arch/powerpc/cpu/ppc4xx/sdram.c
new file mode 100644
index 000000000..d4ef36d39
--- /dev/null
+++ b/qemu/roms/u-boot/arch/powerpc/cpu/ppc4xx/sdram.c
@@ -0,0 +1,452 @@
+/*
+ * (C) Copyright 2005-2007
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * (C) Copyright 2006
+ * DAVE Srl <www.dave-tech.it>
+ *
+ * (C) Copyright 2002-2004
+ * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/ppc4xx.h>
+#include <asm/processor.h>
+#include "sdram.h"
+#include "ecc.h"
+
+#ifdef CONFIG_SDRAM_BANK0
+
+#ifndef CONFIG_440
+
+#ifndef CONFIG_SYS_SDRAM_TABLE
+sdram_conf_t mb0cf[] = {
+	{(128 << 20), 13, 0x000A4001},	    /* (0-128MB) Address Mode 3, 13x10(4) */
+	{(64 << 20),  13, 0x00084001},	    /* (0-64MB) Address Mode 3, 13x9(4)	  */
+	{(32 << 20),  12, 0x00062001},	    /* (0-32MB) Address Mode 2, 12x9(4)	  */
+	{(16 << 20),  12, 0x00046001},	    /* (0-16MB) Address Mode 4, 12x8(4)	  */
+	{(4 << 20),   11, 0x00008001},	    /* (0-4MB) Address Mode 5, 11x8(2)	  */
+};
+#else
+sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
+#endif
+
+#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
+
+#ifdef CONFIG_SYS_SDRAM_CASL
+static ulong ns2clks(ulong ns)
+{
+	ulong bus_period_x_10 = ONE_BILLION / (get_bus_freq(0) / 10);
+
+	return ((ns * 10) + bus_period_x_10) / bus_period_x_10;
+}
+#endif /* CONFIG_SYS_SDRAM_CASL */
+
+static ulong compute_sdtr1(ulong speed)
+{
+#ifdef CONFIG_SYS_SDRAM_CASL
+	ulong tmp;
+	ulong sdtr1 = 0;
+
+	/* CASL */
+	if (CONFIG_SYS_SDRAM_CASL < 2)
+		sdtr1 |= (1 << SDRAM0_TR_CASL);
+	else
+		if (CONFIG_SYS_SDRAM_CASL > 4)
+			sdtr1 |= (3 << SDRAM0_TR_CASL);
+		else
+			sdtr1 |= ((CONFIG_SYS_SDRAM_CASL-1) << SDRAM0_TR_CASL);
+
+	/* PTA */
+	tmp = ns2clks(CONFIG_SYS_SDRAM_PTA);
+	if ((tmp >= 2) && (tmp <= 4))
+		sdtr1 |= ((tmp-1) << SDRAM0_TR_PTA);
+	else
+		sdtr1 |= ((4-1) << SDRAM0_TR_PTA);
+
+	/* CTP */
+	tmp = ns2clks(CONFIG_SYS_SDRAM_CTP);
+	if ((tmp >= 2) && (tmp <= 4))
+		sdtr1 |= ((tmp-1) << SDRAM0_TR_CTP);
+	else
+		sdtr1 |= ((4-1) << SDRAM0_TR_CTP);
+
+	/* LDF */
+	tmp = ns2clks(CONFIG_SYS_SDRAM_LDF);
+	if ((tmp >= 2) && (tmp <= 4))
+		sdtr1 |= ((tmp-1) << SDRAM0_TR_LDF);
+	else
+		sdtr1 |= ((2-1) << SDRAM0_TR_LDF);
+
+	/* RFTA */
+	tmp = ns2clks(CONFIG_SYS_SDRAM_RFTA);
+	if ((tmp >= 4) && (tmp <= 10))
+		sdtr1 |= ((tmp-4) << SDRAM0_TR_RFTA);
+	else
+		sdtr1 |= ((10-4) << SDRAM0_TR_RFTA);
+
+	/* RCD */
+	tmp = ns2clks(CONFIG_SYS_SDRAM_RCD);
+	if ((tmp >= 2) && (tmp <= 4))
+		sdtr1 |= ((tmp-1) << SDRAM0_TR_RCD);
+	else
+		sdtr1 |= ((4-1) << SDRAM0_TR_RCD);
+
+	return sdtr1;
+#else /* CONFIG_SYS_SDRAM_CASL */
+	/*
+	 * If no values are configured in the board config file
+	 * use the default values, which seem to be ok for most
+	 * boards.
+	 *
+	 * REMARK:
+	 * For new board ports we strongly recommend to define the
+	 * correct values for the used SDRAM chips in your board
+	 * config file (see PPChameleonEVB.h)
+	 */
+	if (speed > 100000000) {
+		/*
+		 * 133 MHz SDRAM
+		 */
+		return 0x01074015;
+	} else {
+		/*
+		 * default: 100 MHz SDRAM
+		 */
+		return 0x0086400d;
+	}
+#endif /* CONFIG_SYS_SDRAM_CASL */
+}
+
+/* refresh is expressed in ms */
+static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
+{
+#ifdef CONFIG_SYS_SDRAM_CASL
+	ulong tmp;
+
+	tmp = ((refresh*1000*1000) / (1 << rows)) * (speed / 1000);
+	tmp /= 1000000;
+
+	return ((tmp & 0x00003FF8) << 16);
+#else /* CONFIG_SYS_SDRAM_CASL */
+	if (speed > 100000000) {
+		/*
+		 * 133 MHz SDRAM
+		 */
+		return 0x07f00000;
+	} else {
+		/*
+		 * default: 100 MHz SDRAM
+		 */
+		return 0x05f00000;
+	}
+#endif /* CONFIG_SYS_SDRAM_CASL */
+}
+
+/*
+ * Autodetect onboard SDRAM on 405 platforms
+ */
+phys_size_t initdram(int board_type)
+{
+	ulong speed;
+	ulong sdtr1;
+	int i;
+
+	/*
+	 * Determine SDRAM speed
+	 */
+	speed = get_bus_freq(0); /* parameter not used on ppc4xx */
+
+	/*
+	 * sdtr1 (register SDRAM0_TR) must take into account timings listed
+	 * in SDRAM chip datasheet. rtr (register SDRAM0_RTR) must take into
+	 * account actual SDRAM size. So we can set up sdtr1 according to what
+	 * is specified in board configuration file while rtr dependds on SDRAM
+	 * size we are assuming before detection.
+	 */
+	sdtr1 = compute_sdtr1(speed);
+
+	for (i=0; i<N_MB0CF; i++) {
+		/*
+		 * Disable memory controller.
+		 */
+		mtsdram(SDRAM0_CFG, 0x00000000);
+
+		/*
+		 * Set MB0CF for bank 0.
+		 */
+		mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
+		mtsdram(SDRAM0_TR, sdtr1);
+		mtsdram(SDRAM0_RTR, compute_rtr(speed, mb0cf[i].rows, 64));
+
+		udelay(200);
+
+		/*
+		 * Set memory controller options reg, MCOPT1.
+		 * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
+		 * read/prefetch.
+		 */
+		mtsdram(SDRAM0_CFG, 0x80800000);
+
+		udelay(10000);
+
+		if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
+			phys_size_t size = mb0cf[i].size;
+
+			/*
+			 * OK, size detected.  Enable second bank if
+			 * defined (assumes same type as bank 0)
+			 */
+#ifdef CONFIG_SDRAM_BANK1
+			mtsdram(SDRAM0_CFG, 0x00000000);
+			mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
+			mtsdram(SDRAM0_CFG, 0x80800000);
+			udelay(10000);
+
+			/*
+			 * Check if 2nd bank is really available.
+			 * If the size not equal to the size of the first
+			 * bank, then disable the 2nd bank completely.
+			 */
+			if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
+			    mb0cf[i].size) {
+				mtsdram(SDRAM0_B1CR, 0);
+				mtsdram(SDRAM0_CFG, 0);
+			} else {
+				/*
+				 * We have two identical banks, so the size
+				 * is twice the bank size
+				 */
+				size = 2 * size;
+			}
+#endif
+
+			/*
+			 * OK, size detected -> all done
+			 */
+			return size;
+		}
+	}
+
+	return 0;
+}
+
+#else /* CONFIG_440 */
+
+/*
+ * Define some default values. Those can be overwritten in the
+ * board config file.
+ */
+
+#ifndef CONFIG_SYS_SDRAM_TABLE
+sdram_conf_t mb0cf[] = {
+	{(256 << 20), 13, 0x000C4001},	/* 256MB mode 3, 13x10(4)	*/
+	{(128 << 20), 13, 0x000A4001},	/* 128MB mode 3, 13x10(4)	*/
+	{(64 << 20),  12, 0x00082001}	/* 64MB mode 2, 12x9(4)		*/
+};
+#else
+sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
+#endif
+
+#ifndef CONFIG_SYS_SDRAM0_TR0
+#define	CONFIG_SYS_SDRAM0_TR0		0x41094012
+#endif
+
+#ifndef CONFIG_SYS_SDRAM0_WDDCTR
+#define CONFIG_SYS_SDRAM0_WDDCTR	0x00000000  /* wrcp=0 dcd=0	*/
+#endif
+
+#ifndef CONFIG_SYS_SDRAM0_RTR
+#define CONFIG_SYS_SDRAM0_RTR 		0x04100000 /* 7.8us @ 133MHz PLB */
+#endif
+
+#ifndef CONFIG_SYS_SDRAM0_CFG0
+#define CONFIG_SYS_SDRAM0_CFG0		0x82000000 /* DCEN=1, PMUD=0, 64-bit */
+#endif
+
+#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
+
+#define NUM_TRIES 64
+#define NUM_READS 10
+
+static void sdram_tr1_set(int ram_address, int* tr1_value)
+{
+	int i;
+	int j, k;
+	volatile unsigned int* ram_pointer = (unsigned int *)ram_address;
+	int first_good = -1, last_bad = 0x1ff;
+
+	unsigned long test[NUM_TRIES] = {
+		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
+		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
+		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
+		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
+		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
+		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
+		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
+		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
+		0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
+
+	/* go through all possible SDRAM0_TR1[RDCT] values */
+	for (i=0; i<=0x1ff; i++) {
+		/* set the current value for TR1 */
+		mtsdram(SDRAM0_TR1, (0x80800800 | i));
+
+		/* write values */
+		for (j=0; j<NUM_TRIES; j++) {
+			ram_pointer[j] = test[j];
+
+			/* clear any cache at ram location */
+			__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+		}
+
+		/* read values back */
+		for (j=0; j<NUM_TRIES; j++) {
+			for (k=0; k<NUM_READS; k++) {
+				/* clear any cache at ram location */
+				__asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
+
+				if (ram_pointer[j] != test[j])
+					break;
+			}
+
+			/* read error */
+			if (k != NUM_READS)
+				break;
+		}
+
+		/* we have a SDRAM0_TR1[RDCT] that is part of the window */
+		if (j == NUM_TRIES) {
+			if (first_good == -1)
+				first_good = i;		/* found beginning of window */
+		} else { /* bad read */
+			/* if we have not had a good read then don't care */
+			if (first_good != -1) {
+				/* first failure after a good read */
+				last_bad = i-1;
+				break;
+			}
+		}
+	}
+
+	/* return the current value for TR1 */
+	*tr1_value = (first_good + last_bad) / 2;
+}
+
+/*
+ * Autodetect onboard DDR SDRAM on 440 platforms
+ *
+ * NOTE: Some of the hardcoded values are hardware dependant,
+ *	 so this should be extended for other future boards
+ *	 using this routine!
+ */
+phys_size_t initdram(int board_type)
+{
+	int i;
+	int tr1_bank1;
+
+#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
+    defined(CONFIG_440GR) || defined(CONFIG_440SP)
+	/*
+	 * Soft-reset SDRAM controller.
+	 */
+	mtsdr(SDR0_SRST, SDR0_SRST_DMC);
+	mtsdr(SDR0_SRST, 0x00000000);
+#endif
+
+	for (i=0; i<N_MB0CF; i++) {
+		/*
+		 * Disable memory controller.
+		 */
+		mtsdram(SDRAM0_CFG0, 0x00000000);
+
+		/*
+		 * Setup some default
+		 */
+		mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default)		*/
+		mtsdram(SDRAM0_SLIO, 0x00000000);	/* rdre=0 wrre=0 rarw=0		*/
+		mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal)		*/
+		mtsdram(SDRAM0_WDDCTR, CONFIG_SYS_SDRAM0_WDDCTR);
+		mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0	*/
+
+		/*
+		 * Following for CAS Latency = 2.5 @ 133 MHz PLB
+		 */
+		mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
+		mtsdram(SDRAM0_TR0, CONFIG_SYS_SDRAM0_TR0);
+		mtsdram(SDRAM0_TR1, 0x80800800);	/* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
+		mtsdram(SDRAM0_RTR, CONFIG_SYS_SDRAM0_RTR);
+		mtsdram(SDRAM0_CFG1, 0x00000000);	/* Self-refresh exit, disable PM*/
+		udelay(400);			/* Delay 200 usecs (min)	*/
+
+		/*
+		 * Enable the controller, then wait for DCEN to complete
+		 */
+		mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
+		udelay(10000);
+
+		if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
+			phys_size_t size = mb0cf[i].size;
+			/*
+			 * Optimize TR1 to current hardware environment
+			 */
+			sdram_tr1_set(0x00000000, &tr1_bank1);
+			mtsdram(SDRAM0_TR1, (tr1_bank1 | 0x80800800));
+
+
+			/*
+			 * OK, size detected.  Enable second bank if
+			 * defined (assumes same type as bank 0)
+			 */
+#ifdef CONFIG_SDRAM_BANK1
+			mtsdram(SDRAM0_CFG0, 0);
+			mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
+			mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
+			udelay(10000);
+
+			/*
+			 * Check if 2nd bank is really available.
+			 * If the size not equal to the size of the first
+			 * bank, then disable the 2nd bank completely.
+			 */
+			if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size)
+			    != mb0cf[i].size) {
+				mtsdram(SDRAM0_CFG0, 0);
+				mtsdram(SDRAM0_B1CR, 0);
+				mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
+				udelay(10000);
+			} else {
+				/*
+				 * We have two identical banks, so the size
+				 * is twice the bank size
+				 */
+				size = 2 * size;
+			}
+#endif
+
+#ifdef CONFIG_SDRAM_ECC
+			ecc_init(0, size);
+#endif
+
+			/*
+			 * OK, size detected -> all done
+			 */
+			return size;
+		}
+	}
+
+	return 0;				/* nothing found !		*/
+}
+
+#endif /* CONFIG_440 */
+
+#endif /* CONFIG_SDRAM_BANK0 */