X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Fcpu%2Fmpc8xxx%2Ffdt.c;fp=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Fcpu%2Fmpc8xxx%2Ffdt.c;h=92737452994bc28a0fdee5a9c18af3a66d4b3626;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/arch/powerpc/cpu/mpc8xxx/fdt.c b/qemu/roms/u-boot/arch/powerpc/cpu/mpc8xxx/fdt.c
new file mode 100644
index 000000000..927374529
--- /dev/null
+++ b/qemu/roms/u-boot/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -0,0 +1,428 @@
+/*
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
+ *
+ * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
+ * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
+ * cpu specific common code for 85xx/86xx processors.
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/mp.h>
+#include <asm/fsl_serdes.h>
+#include <phy.h>
+#include <hwconfig.h>
+
+#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	1
+#endif
+
+#if defined(CONFIG_MP) && (defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx))
+static int ft_del_cpuhandle(void *blob, int cpuhandle)
+{
+	int off, ret = -FDT_ERR_NOTFOUND;
+
+	/* if we find a match, we'll delete at it which point the offsets are
+	 * invalid so we start over from the beginning
+	 */
+	off = fdt_node_offset_by_prop_value(blob, -1, "cpu-handle",
+						&cpuhandle, 4);
+	while (off != -FDT_ERR_NOTFOUND) {
+		fdt_delprop(blob, off, "cpu-handle");
+		ret = 1;
+		off = fdt_node_offset_by_prop_value(blob, -1, "cpu-handle",
+				&cpuhandle, 4);
+	}
+
+	return ret;
+}
+
+void ft_fixup_num_cores(void *blob) {
+	int off, num_cores, del_cores;
+
+	del_cores = 0;
+	num_cores = cpu_numcores();
+
+	off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
+	while (off != -FDT_ERR_NOTFOUND) {
+		u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+		u32 phys_cpu_id = thread_to_core(*reg);
+
+		if (!is_core_valid(phys_cpu_id) || is_core_disabled(phys_cpu_id)) {
+			int ph = fdt_get_phandle(blob, off);
+
+			/* Delete the cpu node once there are no cpu handles */
+			if (-FDT_ERR_NOTFOUND == ft_del_cpuhandle(blob, ph)) {
+				fdt_del_node(blob, off);
+				del_cores++;
+			}
+			/* either we deleted some cpu handles or the cpu node
+			 * so we reset the offset back to the start since we
+			 * can't trust the offsets anymore
+			 */
+			off = -1;
+		}
+		off = fdt_node_offset_by_prop_value(blob, off,
+				"device_type", "cpu", 4);
+	}
+	debug ("%x core system found\n", num_cores);
+	debug ("deleted %d extra core entry entries from device tree\n",
+								del_cores);
+}
+#endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
+
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB)
+static int fdt_fixup_usb_mode_phy_type(void *blob, const char *mode,
+				const char *phy_type, int start_offset)
+{
+	const char *compat_dr = "fsl-usb2-dr";
+	const char *compat_mph = "fsl-usb2-mph";
+	const char *prop_mode = "dr_mode";
+	const char *prop_type = "phy_type";
+	const char *node_type = NULL;
+	int node_offset;
+	int err;
+
+	node_offset = fdt_node_offset_by_compatible(blob,
+			start_offset, compat_mph);
+	if (node_offset < 0) {
+		node_offset = fdt_node_offset_by_compatible(blob,
+			start_offset, compat_dr);
+		if (node_offset < 0) {
+			printf("WARNING: could not find compatible"
+				" node %s or %s: %s.\n", compat_mph,
+				compat_dr, fdt_strerror(node_offset));
+			return -1;
+		} else
+			node_type = compat_dr;
+	} else
+		node_type = compat_mph;
+
+	if (mode) {
+		err = fdt_setprop(blob, node_offset, prop_mode, mode,
+				  strlen(mode) + 1);
+		if (err < 0)
+			printf("WARNING: could not set %s for %s: %s.\n",
+			       prop_mode, node_type, fdt_strerror(err));
+	}
+
+	if (phy_type) {
+		err = fdt_setprop(blob, node_offset, prop_type, phy_type,
+				  strlen(phy_type) + 1);
+		if (err < 0)
+			printf("WARNING: could not set %s for %s: %s.\n",
+			       prop_type, node_type, fdt_strerror(err));
+	}
+
+	return node_offset;
+}
+
+void fdt_fixup_dr_usb(void *blob, bd_t *bd)
+{
+	const char *modes[] = { "host", "peripheral", "otg" };
+	const char *phys[] = { "ulpi", "utmi" };
+	const char *dr_mode_type = NULL;
+	const char *dr_phy_type = NULL;
+	int usb_mode_off = -1;
+	int usb_phy_off = -1;
+	char str[5];
+	int i, j;
+
+	for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
+		int mode_idx = -1, phy_idx = -1;
+		snprintf(str, 5, "%s%d", "usb", i);
+		if (hwconfig(str)) {
+			for (j = 0; j < ARRAY_SIZE(modes); j++) {
+				if (hwconfig_subarg_cmp(str, "dr_mode",
+						modes[j])) {
+					mode_idx = j;
+					break;
+				}
+			}
+
+			for (j = 0; j < ARRAY_SIZE(phys); j++) {
+				if (hwconfig_subarg_cmp(str, "phy_type",
+						phys[j])) {
+					phy_idx = j;
+					break;
+				}
+			}
+
+			if (mode_idx < 0 || phy_idx < 0) {
+				puts("ERROR: wrong usb mode/phy defined!!\n");
+				return;
+			}
+
+			dr_mode_type = modes[mode_idx];
+			dr_phy_type = phys[phy_idx];
+
+			if (mode_idx < 0 && phy_idx < 0) {
+				printf("WARNING: invalid phy or mode\n");
+				return;
+			}
+		}
+
+		usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
+			dr_mode_type, NULL, usb_mode_off);
+
+		if (usb_mode_off < 0)
+			return;
+
+		usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
+			NULL, dr_phy_type, usb_phy_off);
+
+		if (usb_phy_off < 0)
+			return;
+	}
+}
+#endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
+
+/*
+ * update crypto node properties to a specified revision of the SEC
+ * called with sec_rev == 0 if not on an E processor
+ */
+#if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */
+void fdt_fixup_crypto_node(void *blob, int sec_rev)
+{
+	static const struct sec_rev_prop {
+		u32 sec_rev;
+		u32 num_channels;
+		u32 channel_fifo_len;
+		u32 exec_units_mask;
+		u32 descriptor_types_mask;
+	} sec_rev_prop_list [] = {
+		{ 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */
+		{ 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */
+		{ 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */
+		{ 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */
+		{ 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */
+		{ 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */
+		{ 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */
+	};
+	static char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
+				   sizeof("fsl,secX.Y")];
+	int crypto_node, sec_idx, err;
+	char *p;
+	u32 val;
+
+	/* locate crypto node based on lowest common compatible */
+	crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0");
+	if (crypto_node == -FDT_ERR_NOTFOUND)
+		return;
+
+	/* delete it if not on an E-processor */
+	if (crypto_node > 0 && !sec_rev) {
+		fdt_del_node(blob, crypto_node);
+		return;
+	}
+
+	/* else we got called for possible uprev */
+	for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++)
+		if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev)
+			break;
+
+	if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) {
+		puts("warning: unknown SEC revision number\n");
+		return;
+	}
+
+	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels);
+	err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+
+	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask);
+	err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+
+	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask);
+	err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+
+	val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len);
+	err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+
+	val = 0;
+	while (sec_idx >= 0) {
+		p = compat_strlist + val;
+		val += sprintf(p, "fsl,sec%d.%d",
+			(sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8,
+			sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1;
+		sec_idx--;
+	}
+	err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val);
+	if (err < 0)
+		printf("WARNING: could not set crypto property: %s\n",
+		       fdt_strerror(err));
+}
+#elif CONFIG_SYS_FSL_SEC_COMPAT >= 4  /* SEC4 */
+static u8 caam_get_era(void)
+{
+	static const struct {
+		u16 ip_id;
+		u8 maj_rev;
+		u8 era;
+	} caam_eras[] = {
+		{0x0A10, 1, 1},
+		{0x0A10, 2, 2},
+		{0x0A12, 1, 3},
+		{0x0A14, 1, 3},
+		{0x0A14, 2, 4},
+		{0x0A16, 1, 4},
+		{0x0A10, 3, 4},
+		{0x0A11, 1, 4},
+		{0x0A18, 1, 4},
+		{0x0A11, 2, 5},
+		{0x0A12, 2, 5},
+		{0x0A13, 1, 5},
+		{0x0A1C, 1, 5}
+	};
+
+	ccsr_sec_t __iomem *sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR;
+	u32 secvid_ms = in_be32(&sec->secvid_ms);
+	u32 ccbvid = in_be32(&sec->ccbvid);
+	u16 ip_id = (secvid_ms & SEC_SECVID_MS_IPID_MASK) >>
+				SEC_SECVID_MS_IPID_SHIFT;
+	u8 maj_rev = (secvid_ms & SEC_SECVID_MS_MAJ_REV_MASK) >>
+				SEC_SECVID_MS_MAJ_REV_SHIFT;
+	u8 era = (ccbvid & SEC_CCBVID_ERA_MASK) >> SEC_CCBVID_ERA_SHIFT;
+
+	int i;
+
+	if (era)	/* This is '0' prior to CAAM ERA-6 */
+		return era;
+
+	for (i = 0; i < ARRAY_SIZE(caam_eras); i++)
+		if (caam_eras[i].ip_id == ip_id &&
+		    caam_eras[i].maj_rev == maj_rev)
+			return caam_eras[i].era;
+
+	return 0;
+}
+
+static void fdt_fixup_crypto_era(void *blob, u32 era)
+{
+	int err;
+	int crypto_node;
+
+	crypto_node = fdt_path_offset(blob, "crypto");
+	if (crypto_node < 0) {
+		printf("WARNING: Missing crypto node\n");
+		return;
+	}
+
+	err = fdt_setprop(blob, crypto_node, "fsl,sec-era", &era,
+			  sizeof(era));
+	if (err < 0) {
+		printf("ERROR: could not set fsl,sec-era property: %s\n",
+		       fdt_strerror(err));
+	}
+}
+
+void fdt_fixup_crypto_node(void *blob, int sec_rev)
+{
+	u8 era;
+
+	if (!sec_rev) {
+		fdt_del_node_and_alias(blob, "crypto");
+		return;
+	}
+
+	/* Add SEC ERA information in compatible */
+	era = caam_get_era();
+	if (era) {
+		fdt_fixup_crypto_era(blob, era);
+	} else {
+		printf("WARNING: Unable to get ERA for CAAM rev: %d\n",
+			sec_rev);
+	}
+}
+#endif
+
+int fdt_fixup_phy_connection(void *blob, int offset, phy_interface_t phyc)
+{
+	return fdt_setprop_string(blob, offset, "phy-connection-type",
+					 phy_string_for_interface(phyc));
+}
+
+#ifdef CONFIG_SYS_SRIO
+static inline void ft_disable_srio_port(void *blob, int srio_off, int port)
+{
+	int off = fdt_node_offset_by_prop_value(blob, srio_off,
+			"cell-index", &port, 4);
+	if (off >= 0) {
+		off = fdt_setprop_string(blob, off, "status", "disabled");
+		if (off > 0)
+			printf("WARNING unable to set status for fsl,srio "
+				"port %d: %s\n", port, fdt_strerror(off));
+	}
+}
+
+static inline void ft_disable_rman(void *blob)
+{
+	int off = fdt_node_offset_by_compatible(blob, -1, "fsl,rman");
+	if (off >= 0) {
+		off = fdt_setprop_string(blob, off, "status", "disabled");
+		if (off > 0)
+			printf("WARNING unable to set status for fsl,rman %s\n",
+				fdt_strerror(off));
+	}
+}
+
+static inline void ft_disable_rmu(void *blob)
+{
+	int off = fdt_node_offset_by_compatible(blob, -1, "fsl,srio-rmu");
+	if (off >= 0) {
+		off = fdt_setprop_string(blob, off, "status", "disabled");
+		if (off > 0)
+			printf("WARNING unable to set status for "
+				"fsl,srio-rmu %s\n", fdt_strerror(off));
+	}
+}
+
+void ft_srio_setup(void *blob)
+{
+	int srio1_used = 0, srio2_used = 0;
+	int srio_off;
+
+	/* search for srio node, if doesn't exist just return - nothing todo */
+	srio_off = fdt_node_offset_by_compatible(blob, -1, "fsl,srio");
+	if (srio_off < 0)
+		return ;
+
+#ifdef CONFIG_SRIO1
+	if (is_serdes_configured(SRIO1))
+		srio1_used = 1;
+#endif
+#ifdef CONFIG_SRIO2
+	if (is_serdes_configured(SRIO2))
+		srio2_used = 1;
+#endif
+
+	/* mark port1 disabled */
+	if (!srio1_used)
+		ft_disable_srio_port(blob, srio_off, 1);
+
+	/* mark port2 disabled */
+	if (!srio2_used)
+		ft_disable_srio_port(blob, srio_off, 2);
+
+	/* if both ports not used, disable controller, rmu and rman */
+	if (!srio1_used && !srio2_used) {
+		fdt_setprop_string(blob, srio_off, "status", "disabled");
+
+		ft_disable_rman(blob);
+		ft_disable_rmu(blob);
+	}
+}
+#endif