X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Fcpu%2Fmpc8xx%2Fcpu_init.c;fp=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Fcpu%2Fmpc8xx%2Fcpu_init.c;h=9c3102dc69f2e93286ce102ff0108adbcb01f205;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/arch/powerpc/cpu/mpc8xx/cpu_init.c b/qemu/roms/u-boot/arch/powerpc/cpu/mpc8xx/cpu_init.c
new file mode 100644
index 000000000..9c3102dc6
--- /dev/null
+++ b/qemu/roms/u-boot/arch/powerpc/cpu/mpc8xx/cpu_init.c
@@ -0,0 +1,246 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <watchdog.h>
+
+#include <mpc8xx.h>
+#include <commproc.h>
+
+#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
+DECLARE_GLOBAL_DATA_PTR;
+#endif
+
+#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
+    defined(CONFIG_SYS_SMC_UCODE_PATCH)
+void cpm_load_patch (volatile immap_t * immr);
+#endif
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f (volatile immap_t * immr)
+{
+	volatile memctl8xx_t *memctl = &immr->im_memctl;
+# ifdef CONFIG_SYS_PLPRCR
+	ulong mfmask;
+# endif
+	ulong reg;
+
+	/* SYPCR - contains watchdog control (11-9) */
+
+	immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
+
+#if defined(CONFIG_WATCHDOG)
+	reset_8xx_watchdog (immr);
+#endif /* CONFIG_WATCHDOG */
+
+	/* SIUMCR - contains debug pin configuration (11-6) */
+#ifndef CONFIG_SVM_SC8xx
+	immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
+#else
+	immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR;
+#endif
+	/* initialize timebase status and control register (11-26) */
+	/* unlock TBSCRK */
+
+	immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
+	immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
+
+	/* initialize the PIT (11-31) */
+
+	immr->im_sitk.sitk_piscrk = KAPWR_KEY;
+	immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
+
+	/* System integration timers. Don't change EBDF! (15-27) */
+
+	immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
+	reg = immr->im_clkrst.car_sccr;
+	reg &= SCCR_MASK;
+	reg |= CONFIG_SYS_SCCR;
+	immr->im_clkrst.car_sccr = reg;
+
+	/* PLL (CPU clock) settings (15-30) */
+
+	immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
+
+	/* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
+	 * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
+	 * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the current MF
+	 * field value.
+	 *
+	 * For newer (starting MPC866) chips PLPRCR layout is different.
+	 */
+#ifdef CONFIG_SYS_PLPRCR
+	if (get_immr(0xFFFF) >= MPC8xx_NEW_CLK)
+	   mfmask = PLPRCR_MFACT_MSK;
+	else
+	   mfmask = PLPRCR_MF_MSK;
+
+	if ((CONFIG_SYS_PLPRCR & mfmask) != 0)
+	   reg = CONFIG_SYS_PLPRCR;			/* reset control bits   */
+	else {
+	   reg = immr->im_clkrst.car_plprcr;
+	   reg &= mfmask;			/* isolate MF-related fields */
+	   reg |= CONFIG_SYS_PLPRCR;			/* reset control bits   */
+	}
+	immr->im_clkrst.car_plprcr = reg;
+#endif
+
+	/*
+	 * Memory Controller:
+	 */
+
+	/* perform BR0 reset that MPC850 Rev. A can't guarantee */
+	reg = memctl->memc_br0;
+	reg &= BR_PS_MSK;	/* Clear everything except Port Size bits */
+	reg |= BR_V;		/* then add just the "Bank Valid" bit     */
+	memctl->memc_br0 = reg;
+
+	/* Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at
+	 * preliminary addresses - these have to be modified later
+	 * when FLASH size has been determined
+	 *
+	 * Depending on the size of the memory region defined by
+	 * CONFIG_SYS_OR0_REMAP some boards (wide address mask) allow to map the
+	 * CONFIG_SYS_MONITOR_BASE, while others (narrower address mask) can't
+	 * map CONFIG_SYS_MONITOR_BASE.
+	 *
+	 * For example, for CONFIG_IVMS8, the CONFIG_SYS_MONITOR_BASE is
+	 * 0xff000000, but CONFIG_SYS_OR0_REMAP's address mask is 0xfff80000.
+	 *
+	 * If BR0 wasn't loaded with address base 0xff000000, then BR0's
+	 * base address remains as 0x00000000. However, the address mask
+	 * have been narrowed to 512Kb, so CONFIG_SYS_MONITOR_BASE wasn't mapped
+	 * into the Bank0.
+	 *
+	 * This is why CONFIG_IVMS8 and similar boards must load BR0 with
+	 * CONFIG_SYS_BR0_PRELIM in advance.
+	 *
+	 * [Thanks to Michael Liao for this explanation.
+	 *  I owe him a free beer. - wd]
+	 */
+
+#if defined(CONFIG_HERMES)	|| \
+    defined(CONFIG_ICU862)	|| \
+    defined(CONFIG_IP860)	|| \
+    defined(CONFIG_IVML24)	|| \
+    defined(CONFIG_IVMS8)	|| \
+    defined(CONFIG_LWMON)	|| \
+    defined(CONFIG_MHPC)	|| \
+    defined(CONFIG_R360MPI)	|| \
+    defined(CONFIG_RMU)		|| \
+    defined(CONFIG_RPXLITE)	|| \
+    defined(CONFIG_SPC1920)	|| \
+    defined(CONFIG_SPD823TS)
+
+	memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR0_REMAP)
+	memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
+#endif
+#if defined(CONFIG_SYS_OR1_REMAP)
+	memctl->memc_or1 = CONFIG_SYS_OR1_REMAP;
+#endif
+#if defined(CONFIG_SYS_OR5_REMAP)
+	memctl->memc_or5 = CONFIG_SYS_OR5_REMAP;
+#endif
+
+	/* now restrict to preliminary range */
+	memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
+	memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
+
+#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
+	memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
+	memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
+#endif
+
+#if defined(CONFIG_IP860) /* disable CS0 now that Flash is mapped on CS1 */
+	memctl->memc_br0 = 0;
+#endif
+
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
+	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
+	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
+	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
+	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
+	memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
+	memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
+	memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
+	memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
+	memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM;
+	memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM;
+#endif
+
+#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
+	memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM;
+	memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
+#endif
+
+	/*
+	 * Reset CPM
+	 */
+	immr->im_cpm.cp_cpcr = CPM_CR_RST | CPM_CR_FLG;
+	do {			/* Spin until command processed     */
+		__asm__ ("eieio");
+	} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
+
+#if defined(CONFIG_RPXLITE) && defined(CONFIG_ENV_IS_IN_NVRAM)
+	rpxlite_init ();
+#endif
+
+#ifdef CONFIG_SYS_RCCR			/* must be done before cpm_load_patch() */
+	/* write config value */
+	immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;
+#endif
+
+#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
+    defined(CONFIG_SYS_SMC_UCODE_PATCH)
+	cpm_load_patch (immr);	/* load mpc8xx  microcode patch */
+#endif
+}
+
+/*
+ * initialize higher level parts of CPU like timers
+ */
+int cpu_init_r (void)
+{
+#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
+	bd_t *bd = gd->bd;
+	volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base);
+#endif
+
+#ifdef CONFIG_SYS_RTCSC
+	/* Unlock RTSC register */
+	immr->im_sitk.sitk_rtcsck = KAPWR_KEY;
+	/* write config value */
+	immr->im_sit.sit_rtcsc = CONFIG_SYS_RTCSC;
+#endif
+
+#ifdef CONFIG_SYS_RMDS
+	/* write config value */
+	immr->im_cpm.cp_rmds = CONFIG_SYS_RMDS;
+#endif
+	return (0);
+}