X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Fcpu%2Fmpc85xx%2Fcpu_init_early.c;fp=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Fcpu%2Fmpc85xx%2Fcpu_init_early.c;h=47b712d56b5595a89d797cb9b868506606ede539;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/roms/u-boot/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/qemu/roms/u-boot/arch/powerpc/cpu/mpc85xx/cpu_init_early.c new file mode 100644 index 000000000..47b712d56 --- /dev/null +++ b/qemu/roms/u-boot/arch/powerpc/cpu/mpc85xx/cpu_init_early.c @@ -0,0 +1,185 @@ +/* + * Copyright 2009-2012 Freescale Semiconductor, Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_A003399_NOR_WORKAROUND +void setup_ifc(void) +{ + struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR; + u32 _mas0, _mas1, _mas2, _mas3, _mas7; + phys_addr_t flash_phys = CONFIG_SYS_FLASH_BASE_PHYS; + + /* + * Adjust the TLB we were running out of to match the phys addr of the + * chip select we are adjusting and will return to. + */ + flash_phys += (~CONFIG_SYS_AMASK0) + 1 - 4*1024*1024; + + _mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(15); + _mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_IPROT | + MAS1_TSIZE(BOOKE_PAGESZ_4M); + _mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE, MAS2_I|MAS2_G); + _mas3 = FSL_BOOKE_MAS3(flash_phys, 0, MAS3_SW|MAS3_SR|MAS3_SX); + _mas7 = FSL_BOOKE_MAS7(flash_phys); + + mtspr(MAS0, _mas0); + mtspr(MAS1, _mas1); + mtspr(MAS2, _mas2); + mtspr(MAS3, _mas3); + mtspr(MAS7, _mas7); + + asm volatile("isync;msync;tlbwe;isync"); + +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) +/* + * TLB entry for debuggging in AS1 + * Create temporary TLB entry in AS0 to handle debug exception + * As on debug exception MSR is cleared i.e. Address space is changed + * to 0. A TLB entry (in AS0) is required to handle debug exception generated + * in AS1. + * + * TLB entry is created for IVPR + IVOR15 to map on valid OP code address + * bacause flash's physical address is going to change as + * CONFIG_SYS_FLASH_BASE_PHYS. + */ + _mas0 = MAS0_TLBSEL(1) | + MAS0_ESEL(CONFIG_SYS_PPC_E500_DEBUG_TLB); + _mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_IPROT | + MAS1_TSIZE(BOOKE_PAGESZ_4M); + _mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE, MAS2_I|MAS2_G); + _mas3 = FSL_BOOKE_MAS3(flash_phys, 0, MAS3_SW|MAS3_SR|MAS3_SX); + _mas7 = FSL_BOOKE_MAS7(flash_phys); + + mtspr(MAS0, _mas0); + mtspr(MAS1, _mas1); + mtspr(MAS2, _mas2); + mtspr(MAS3, _mas3); + mtspr(MAS7, _mas7); + + asm volatile("isync;msync;tlbwe;isync"); +#endif + + /* Change flash's physical address */ + out_be32(&(ifc_regs->cspr_cs[0].cspr), CONFIG_SYS_CSPR0); + out_be32(&(ifc_regs->csor_cs[0].csor), CONFIG_SYS_CSOR0); + out_be32(&(ifc_regs->amask_cs[0].amask), CONFIG_SYS_AMASK0); + + return ; +} +#endif + +/* We run cpu_init_early_f in AS = 1 */ +void cpu_init_early_f(void *fdt) +{ + u32 mas0, mas1, mas2, mas3, mas7; + int i; +#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549 + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#endif +#ifdef CONFIG_A003399_NOR_WORKAROUND + ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; + u32 *dst, *src; + void (*setup_ifc_sram)(void); +#endif + + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + + /* + * Clear initial global data + * we don't use memset so we can share this code with NAND_SPL + */ + for (i = 0; i < sizeof(gd_t); i++) + ((char *)gd)[i] = 0; + +#ifdef CONFIG_QEMU_E500 + /* + * CONFIG_SYS_CCSRBAR_PHYS below may use gd->fdt_blob on ePAPR systems, + * so we need to populate it before it accesses it. + */ + gd->fdt_blob = fdt; +#endif + + mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(13); + mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_1M); + mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G); + mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS, 0, MAS3_SW|MAS3_SR); + mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_PHYS); + + write_tlb(mas0, mas1, mas2, mas3, mas7); + +/* + * Work Around for IFC Erratum A-003549. This issue is P1010 + * specific. LCLK(a free running clk signal) is muxed with IFC_CS3 on P1010 SOC + * Hence specifically selecting CS3. + */ +#ifdef CONFIG_SYS_FSL_ERRATUM_P1010_A003549 + setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_LCLK_IFC_CS3); +#endif + + init_laws(); + +/* + * Work Around for IFC Erratum A003399, issue will hit only when execution + * from NOR Flash + */ +#ifdef CONFIG_A003399_NOR_WORKAROUND +#define SRAM_BASE_ADDR (0x00000000) + /* TLB for SRAM */ + mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(9); + mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | + MAS1_TSIZE(BOOKE_PAGESZ_1M); + mas2 = FSL_BOOKE_MAS2(SRAM_BASE_ADDR, MAS2_I); + mas3 = FSL_BOOKE_MAS3(SRAM_BASE_ADDR, 0, MAS3_SX|MAS3_SW|MAS3_SR); + mas7 = FSL_BOOKE_MAS7(0); + + write_tlb(mas0, mas1, mas2, mas3, mas7); + + out_be32(&l2cache->l2srbar0, SRAM_BASE_ADDR); + + out_be32(&l2cache->l2errdis, + (MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC)); + + out_be32(&l2cache->l2ctl, + (MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE)); + + /* + * Copy the code in setup_ifc to L2SRAM. Do a word copy + * because NOR Flash on P1010 does not support byte + * access (Erratum IFC-A002769) + */ + setup_ifc_sram = (void *)SRAM_BASE_ADDR; + dst = (u32 *) SRAM_BASE_ADDR; + src = (u32 *) setup_ifc; + for (i = 0; i < 1024; i++) + *dst++ = *src++; + + setup_ifc_sram(); + + /* CLEANUP */ + clrbits_be32(&l2cache->l2ctl, + (MPC85xx_L2CTL_L2E | + MPC85xx_L2CTL_L2SRAM_ENTIRE)); + out_be32(&l2cache->l2srbar0, 0x0); +#endif + + invalidate_tlb(1); + +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && \ + !(defined(CONFIG_SPL_INIT_MINIMAL) && defined(CONFIG_SPL_BUILD)) && \ + !defined(CONFIG_NAND_SPL) + disable_tlb(CONFIG_SYS_PPC_E500_DEBUG_TLB); +#endif + + init_tlbs(); +}