X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Fcpu%2Fmpc5xxx%2Fspl_boot.c;fp=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Fcpu%2Fmpc5xxx%2Fspl_boot.c;h=e182dfbd45a34cb51d983f2a376c9d110600ae7b;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/arch/powerpc/cpu/mpc5xxx/spl_boot.c b/qemu/roms/u-boot/arch/powerpc/cpu/mpc5xxx/spl_boot.c
new file mode 100644
index 000000000..e182dfbd4
--- /dev/null
+++ b/qemu/roms/u-boot/arch/powerpc/cpu/mpc5xxx/spl_boot.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <spl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Needed to align size SPL image to a 4-byte length
+ */
+u32 end_align __attribute__ ((section(".end_align")));
+
+/*
+ * Return selected boot device. On MPC5200 its only NOR flash right now.
+ */
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_NOR;
+}
+
+/*
+ * SPL version of board_init_f()
+ */
+void board_init_f(ulong bootflag)
+{
+	end_align = (u32)__spl_flash_end;
+
+	/*
+	 * On MPC5200, the initial RAM (and gd) is located in the internal
+	 * SRAM. So we can actually call the preloader console init code
+	 * before calling initdram(). This makes serial output (printf)
+	 * available very early, even before SDRAM init, which has been
+	 * an U-Boot priciple from day 1.
+	 */
+
+	/*
+	 * Init global_data pointer. Has to be done before calling
+	 * get_clocks(), as it stores some clock values into gd needed
+	 * later on in the serial driver.
+	 */
+	/* Pointer is writable since we allocated a register for it */
+	gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+	/* Clear initial global data */
+	memset((void *)gd, 0, sizeof(gd_t));
+
+	/*
+	 * get_clocks() needs to be called so that the serial driver
+	 * works correctly
+	 */
+	get_clocks();
+
+	/*
+	 * Do rudimental console / serial setup
+	 */
+	preloader_console_init();
+
+	/*
+	 * First we need to initialize the SDRAM, so that the real
+	 * U-Boot or the OS (Linux) can be loaded
+	 */
+	initdram(0);
+
+	/* Clear bss */
+	memset(__bss_start, '\0', __bss_end - __bss_start);
+
+	/*
+	 * Call board_init_r() (SPL framework version) to load and boot
+	 * real U-Boot or OS
+	 */
+	board_init_r(NULL, 0);
+	/* Does not return!!! */
+}