X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Fcpu%2F74xx_7xx%2Fspeed.c;fp=qemu%2Froms%2Fu-boot%2Farch%2Fpowerpc%2Fcpu%2F74xx_7xx%2Fspeed.c;h=5ffa41cfc1b4f49059971410ce3a562474a01481;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/arch/powerpc/cpu/74xx_7xx/speed.c b/qemu/roms/u-boot/arch/powerpc/cpu/74xx_7xx/speed.c
new file mode 100644
index 000000000..5ffa41cfc
--- /dev/null
+++ b/qemu/roms/u-boot/arch/powerpc/cpu/74xx_7xx/speed.c
@@ -0,0 +1,165 @@
+/*
+ * (C) Copyright 2000-2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <74xx_7xx.h>
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern unsigned long get_board_bus_clk (void);
+
+static const int hid1_multipliers_x_10[] = {
+	25,	/* 0000 - 2.5x */
+	75,	/* 0001 - 7.5x */
+	70,	/* 0010 - 7x */
+	10,	/* 0011 - bypass */
+	20,	/* 0100 - 2x */
+	65,	/* 0101 - 6.5x */
+	100,	/* 0110 - 10x */
+	45,	/* 0111 - 4.5x */
+	30,	/* 1000 - 3x */
+	55,	/* 1001 - 5.5x */
+	40,	/* 1010 - 4x */
+	50,	/* 1011 - 5x */
+	80,	/* 1100 - 8x */
+	60,	/* 1101 - 6x */
+	35,	/* 1110 - 3.5x */
+	0	/* 1111 - off */
+};
+
+/* PLL_CFG[0:4] table for cpu 7448/7447A/7455/7457 */
+static const int hid1_74xx_multipliers_x_10[] = {
+	115,	/* 00000 - 11.5x  */
+	170,	/* 00001 - 17x    */
+	75,	/* 00010 -  7.5x  */
+	150,	/* 00011 - 15x    */
+	70,	/* 00100 -  7x    */
+	180,	/* 00101 - 18x    */
+	10,	/* 00110 - bypass */
+	200,	/* 00111 - 20x    */
+	20,	/* 01000 -  2x    */
+	210,	/* 01001 - 21x    */
+	65,	/* 01010 -  6.5x  */
+	130,	/* 01011 - 13x    */
+	85,	/* 01100 -  8.5x  */
+	240,	/* 01101 - 24x    */
+	95,	/* 01110 -  9.5x  */
+	90,	/* 01111 -  9x    */
+	30,	/* 10000 -  3x    */
+	105,	/* 10001 - 10.5x  */
+	55,	/* 10010 -  5.5x  */
+	110,	/* 10011 - 11x    */
+	40,	/* 10100 -  4x    */
+	100,	/* 10101 - 10x    */
+	50,	/* 10110 -  5x    */
+	120,	/* 10111 - 12x    */
+	80,	/* 11000 -  8x    */
+	140,	/* 11001 - 14x    */
+	60,	/* 11010 -  6x    */
+	160,	/* 11011 - 16x    */
+	135,	/* 11100 - 13.5x  */
+	280,	/* 11101 - 28x    */
+	0,	/* 11110 - off    */
+	125	/* 11111 - 12.5x  */
+};
+
+static const int hid1_fx_multipliers_x_10[] = {
+	00,	/* 0000 - off */
+	00,	/* 0001 - off */
+	10,	/* 0010 - bypass */
+	10,	/* 0011 - bypass */
+	20,	/* 0100 - 2x */
+	25,	/* 0101 - 2.5x */
+	30,	/* 0110 - 3x */
+	35,	/* 0111 - 3.5x */
+	40,	/* 1000 - 4x */
+	45,	/* 1001 - 4.5x */
+	50,	/* 1010 - 5x */
+	55,	/* 1011 - 5.5x */
+	60,	/* 1100 - 6x */
+	65,	/* 1101 - 6.5x */
+	70,	/* 1110 - 7x */
+	75,	/* 1111 - 7.5 */
+	80,	/* 10000 - 8x */
+	85,	/* 10001 - 8.5x */
+	90,	/* 10010 - 9x */
+	95,	/* 10011 - 9.5x */
+	100,	/* 10100 - 10x */
+	110,	/* 10101 - 11x */
+	120,	/* 10110 - 12x */
+};
+
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Measure CPU clock speed (core clock GCLK1, GCLK2)
+ *
+ * (Approx. GCLK frequency in Hz)
+ */
+
+int get_clocks (void)
+{
+	ulong clock = 0;
+
+#ifdef CONFIG_SYS_BUS_CLK
+	gd->bus_clk = CONFIG_SYS_BUS_CLK;	/* bus clock is a fixed frequency */
+#else
+	gd->bus_clk = get_board_bus_clk ();	/* bus clock is configurable */
+#endif
+
+	/* calculate the clock frequency based upon the CPU type */
+	switch (get_cpu_type()) {
+	case CPU_7447A:
+	case CPU_7448:
+	case CPU_7455:
+	case CPU_7457:
+		/*
+		 * Make sure division is done before multiplication to prevent 32-bit
+		 * arithmetic overflows which will cause a negative number
+		 */
+		clock = (gd->bus_clk / 10) *
+			hid1_74xx_multipliers_x_10[(get_hid1 () >> 12) & 0x1F];
+		break;
+
+	case CPU_750GX:
+	case CPU_750FX:
+		clock = (gd->bus_clk / 10) *
+			hid1_fx_multipliers_x_10[get_hid1 () >> 27];
+		break;
+
+	case CPU_7450:
+	case CPU_740:
+	case CPU_740P:
+	case CPU_745:
+	case CPU_750CX:
+	case CPU_750:
+	case CPU_750P:
+	case CPU_755:
+	case CPU_7400:
+	case CPU_7410:
+		/*
+		 * Make sure division is done before multiplication to prevent 32-bit
+		 * arithmetic overflows which will cause a negative number
+		 */
+		clock = (gd->bus_clk / 10) *
+			hid1_multipliers_x_10[get_hid1 () >> 28];
+		break;
+
+	case CPU_UNKNOWN:
+	       printf ("get_gclk_freq(): unknown CPU type\n");
+	       clock = 0;
+	       return (1);
+	}
+
+	gd->cpu_clk = clock;
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */