X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Fm68k%2Fcpu%2Fmcf5445x%2Fstart.S;fp=qemu%2Froms%2Fu-boot%2Farch%2Fm68k%2Fcpu%2Fmcf5445x%2Fstart.S;h=979eb5a765a8a9ce9860ca0ad1d0d75e5e2b864c;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/roms/u-boot/arch/m68k/cpu/mcf5445x/start.S b/qemu/roms/u-boot/arch/m68k/cpu/mcf5445x/start.S new file mode 100644 index 000000000..979eb5a76 --- /dev/null +++ b/qemu/roms/u-boot/arch/m68k/cpu/mcf5445x/start.S @@ -0,0 +1,780 @@ +/* + * Copyright (C) 2003 Josef Baumgartner + * Based on code from Bernhard Kuhn + * + * Copyright 2010-2012 Freescale Semiconductor, Inc. + * TsiChung Liew (Tsi-Chung.Liew@freescale.com) + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include "version.h" +#include + +#ifndef CONFIG_IDENT_STRING +#define CONFIG_IDENT_STRING "" +#endif + +#define _START _start +#define _FAULT _fault + +#define SAVE_ALL \ + move.w #0x2700,%sr; /* disable intrs */ \ + subl #60,%sp; /* space for 15 regs */ \ + moveml %d0-%d7/%a0-%a6,%sp@; + +#define RESTORE_ALL \ + moveml %sp@,%d0-%d7/%a0-%a6; \ + addl #60,%sp; /* space for 15 regs */ \ + rte; + +#if defined(CONFIG_SERIAL_BOOT) +#define ASM_DRAMINIT (asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) +#define ASM_DRAMINIT_N (asm_dram_init - TEXT_BASE) +#define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR) +#endif + +.text + +/* + * Vector table. This is used for initial platform startup. + * These vectors are to catch any un-intended traps. + */ +_vectors: +#if defined(CONFIG_SERIAL_BOOT) + +INITSP: .long 0 /* Initial SP */ +#ifdef CONFIG_CF_SBF +INITPC: .long ASM_DRAMINIT /* Initial PC */ +#endif +#ifdef CONFIG_SYS_NAND_BOOT +INITPC: .long ASM_DRAMINIT_N /* Initial PC */ +#endif + +#else + +INITSP: .long 0 /* Initial SP */ +INITPC: .long _START /* Initial PC */ + +#endif + +vector02: .long _FAULT /* Access Error */ +vector03: .long _FAULT /* Address Error */ +vector04: .long _FAULT /* Illegal Instruction */ +vector05: .long _FAULT /* Reserved */ +vector06: .long _FAULT /* Reserved */ +vector07: .long _FAULT /* Reserved */ +vector08: .long _FAULT /* Privilege Violation */ +vector09: .long _FAULT /* Trace */ +vector0A: .long _FAULT /* Unimplemented A-Line */ +vector0B: .long _FAULT /* Unimplemented F-Line */ +vector0C: .long _FAULT /* Debug Interrupt */ +vector0D: .long _FAULT /* Reserved */ +vector0E: .long _FAULT /* Format Error */ +vector0F: .long _FAULT /* Unitialized Int. */ + +/* Reserved */ +vector10_17: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector18: .long _FAULT /* Spurious Interrupt */ +vector19: .long _FAULT /* Autovector Level 1 */ +vector1A: .long _FAULT /* Autovector Level 2 */ +vector1B: .long _FAULT /* Autovector Level 3 */ +vector1C: .long _FAULT /* Autovector Level 4 */ +vector1D: .long _FAULT /* Autovector Level 5 */ +vector1E: .long _FAULT /* Autovector Level 6 */ +vector1F: .long _FAULT /* Autovector Level 7 */ + +#if !defined(CONFIG_SERIAL_BOOT) + +/* TRAP #0 - #15 */ +vector20_2F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +/* Reserved */ +vector30_3F: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector64_127: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector128_191: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT + +vector192_255: +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +.long _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT +#endif + +#if defined(CONFIG_SERIAL_BOOT) + /* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */ +asm_sbf_img_hdr: + .long 0x00000000 /* checksum, not yet implemented */ + .long 0x00040000 /* image length */ + .long CONFIG_SYS_TEXT_BASE /* image to be relocated at */ + +asm_dram_init: + move.w #0x2700,%sr /* Mask off Interrupt */ + +#ifdef CONFIG_SYS_NAND_BOOT + /* for assembly stack */ + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 + + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp + clr.l %sp@- +#endif + +#ifdef CONFIG_CF_SBF + move.l #CONFIG_SYS_INIT_RAM_ADDR, %d0 + movec %d0, %VBR + + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* dcache */ + move.l %d0, (%a1) + move.l %d0, (%a2) + + /* invalidate and disable cache */ + move.l #(CONFIG_SYS_ICACHE_INV + CONFIG_SYS_DCACHE_INV), %d0 + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + movec %d0, %ACR2 + movec %d0, %ACR3 + + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp + clr.l %sp@- + + /* Must disable global address */ + move.l #0xFC008000, %a1 + move.l #(CONFIG_SYS_CS0_BASE), (%a1) + move.l #0xFC008008, %a1 + move.l #(CONFIG_SYS_CS0_CTRL), (%a1) + move.l #0xFC008004, %a1 + move.l #(CONFIG_SYS_CS0_MASK), (%a1) +#endif /* CONFIG_CF_SBF */ + +#ifdef CONFIG_MCF5441x + /* TC: enable all peripherals, + in the future only enable certain peripherals */ + move.l #0xFC04002D, %a1 + +#if defined(CONFIG_CF_SBF) + move.b #23, (%a1) /* dspi */ +#endif + move.b #46, (%a1) /* DDR */ + + /* slew settings */ + move.l #0xEC094060, %a1 + move.b #0, (%a1) + + /* use vco instead of cpu*2 clock for ddr clock */ + move.l #0xEC09001A, %a1 + move.w #0xE01D, (%a1) + + /* DDR settings */ + move.l #0xFC0B8180, %a1 + move.l #0x00000000, (%a1) + move.l #0x40000000, (%a1) + + move.l #0xFC0B81AC, %a1 + move.l #0x01030203, (%a1) + + move.l #0xFC0B8000, %a1 + move.l #0x01010101, (%a1)+ /* 0x00 */ + move.l #0x00000101, (%a1)+ /* 0x04 */ + move.l #0x01010100, (%a1)+ /* 0x08 */ + move.l #0x01010000, (%a1)+ /* 0x0C */ + move.l #0x00010101, (%a1)+ /* 0x10 */ + move.l #0xFC0B8018, %a1 + move.l #0x00010100, (%a1)+ /* 0x18 */ + move.l #0x00000001, (%a1)+ /* 0x1C */ + move.l #0x01000001, (%a1)+ /* 0x20 */ + move.l #0x00000100, (%a1)+ /* 0x24 */ + move.l #0x00010001, (%a1)+ /* 0x28 */ + move.l #0x00000200, (%a1)+ /* 0x2C */ + move.l #0x01000002, (%a1)+ /* 0x30 */ + move.l #0x00000000, (%a1)+ /* 0x34 */ + move.l #0x00000100, (%a1)+ /* 0x38 */ + move.l #0x02000100, (%a1)+ /* 0x3C */ + move.l #0x02000407, (%a1)+ /* 0x40 */ + move.l #0x02030007, (%a1)+ /* 0x44 */ + move.l #0x02000100, (%a1)+ /* 0x48 */ + move.l #0x0A030203, (%a1)+ /* 0x4C */ + move.l #0x00020708, (%a1)+ /* 0x50 */ + move.l #0x00050008, (%a1)+ /* 0x54 */ + move.l #0x04030002, (%a1)+ /* 0x58 */ + move.l #0x00000004, (%a1)+ /* 0x5C */ + move.l #0x020A0000, (%a1)+ /* 0x60 */ + move.l #0x0C00000E, (%a1)+ /* 0x64 */ + move.l #0x00002004, (%a1)+ /* 0x68 */ + move.l #0x00000000, (%a1)+ /* 0x6C */ + move.l #0x00100010, (%a1)+ /* 0x70 */ + move.l #0x00100010, (%a1)+ /* 0x74 */ + move.l #0x00000000, (%a1)+ /* 0x78 */ + move.l #0x07990000, (%a1)+ /* 0x7C */ + move.l #0xFC0B80A0, %a1 + move.l #0x00000000, (%a1)+ /* 0xA0 */ + move.l #0x00C80064, (%a1)+ /* 0xA4 */ + move.l #0x44520002, (%a1)+ /* 0xA8 */ + move.l #0x00C80023, (%a1)+ /* 0xAC */ + move.l #0xFC0B80B4, %a1 + move.l #0x0000C350, (%a1) /* 0xB4 */ + move.l #0xFC0B80E0, %a1 + move.l #0x04000000, (%a1)+ /* 0xE0 */ + move.l #0x03000304, (%a1)+ /* 0xE4 */ + move.l #0x40040000, (%a1)+ /* 0xE8 */ + move.l #0xC0004004, (%a1)+ /* 0xEC */ + move.l #0x0642C000, (%a1)+ /* 0xF0 */ + move.l #0x00000642, (%a1)+ /* 0xF4 */ + move.l #0xFC0B8024, %a1 + tpf + move.l #0x01000100, (%a1) /* 0x24 */ + + move.l #0x2000, %d1 + jsr asm_delay +#endif /* CONFIG_MCF5441x */ + +#ifdef CONFIG_MCF5445x + /* Dram Initialization a1, a2, and d0 */ + /* mscr sdram */ + move.l #0xFC0A4074, %a1 + move.b #(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1) + nop + + /* SDRAM Chip 0 and 1 */ + move.l #0xFC0B8110, %a1 + move.l #0xFC0B8114, %a2 + + /* calculate the size */ + move.l #0x13, %d1 + move.l #(CONFIG_SYS_SDRAM_SIZE), %d2 +#ifdef CONFIG_SYS_SDRAM_BASE1 + lsr.l #1, %d2 +#endif + +dramsz_loop: + lsr.l #1, %d2 + add.l #1, %d1 + cmp.l #1, %d2 + bne dramsz_loop +#ifdef CONFIG_SYS_NAND_BOOT + beq asm_nand_chk_status +#endif + /* SDRAM Chip 0 and 1 */ + move.l #(CONFIG_SYS_SDRAM_BASE), (%a1) + or.l %d1, (%a1) +#ifdef CONFIG_SYS_SDRAM_BASE1 + move.l #(CONFIG_SYS_SDRAM_BASE1), (%a2) + or.l %d1, (%a2) +#endif + nop + + /* dram cfg1 and cfg2 */ + move.l #0xFC0B8008, %a1 + move.l #(CONFIG_SYS_SDRAM_CFG1), (%a1) + nop + move.l #0xFC0B800C, %a2 + move.l #(CONFIG_SYS_SDRAM_CFG2), (%a2) + nop + + move.l #0xFC0B8000, %a1 /* Mode */ + move.l #0xFC0B8004, %a2 /* Ctrl */ + + /* Issue PALL */ + move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2) + nop + +#ifdef CONFIG_M54455EVB + /* Issue LEMR */ + move.l #(CONFIG_SYS_SDRAM_EMOD + 0x408), (%a1) + nop + move.l #(CONFIG_SYS_SDRAM_MODE + 0x300), (%a1) + nop +#endif + + move.l #1000, %d1 + jsr asm_delay + + /* Issue PALL */ + move.l #(CONFIG_SYS_SDRAM_CTRL + 2), (%a2) + nop + + /* Perform two refresh cycles */ + move.l #(CONFIG_SYS_SDRAM_CTRL + 4), %d0 + nop + move.l %d0, (%a2) + move.l %d0, (%a2) + nop + +#ifdef CONFIG_M54455EVB + move.l #(CONFIG_SYS_SDRAM_MODE + 0x200), (%a1) + nop +#elif defined(CONFIG_M54451EVB) + /* Issue LEMR */ + move.l #(CONFIG_SYS_SDRAM_MODE), (%a1) + nop + move.l #(CONFIG_SYS_SDRAM_EMOD), (%a1) +#endif + + move.l #500, %d1 + jsr asm_delay + + move.l #(CONFIG_SYS_SDRAM_CTRL), %d1 + and.l #0x7FFFFFFF, %d1 +#ifdef CONFIG_M54455EVB + or.l #0x10000C00, %d1 +#elif defined(CONFIG_M54451EVB) + or.l #0x10000C00, %d1 +#endif + move.l %d1, (%a2) + nop + + move.l #2000, %d1 + jsr asm_delay +#endif /* CONFIG_MCF5445x */ + +#ifdef CONFIG_CF_SBF + /* + * DSPI Initialization + * a0 - general, sram - 0x80008000 - 32, see M54455EVB.h + * a1 - dspi status + * a2 - dtfr + * a3 - drfr + * a4 - Dst addr + */ + /* Enable pins for DSPI mode - chip-selects are enabled later */ +asm_dspi_init: +#ifdef CONFIG_MCF5441x + move.l #0xEC09404E, %a1 + move.l #0xEC09404F, %a2 + move.b #0xFF, (%a1) + move.b #0x80, (%a2) +#endif + +#ifdef CONFIG_MCF5445x + move.l #0xFC0A4063, %a0 + move.b #0x7F, (%a0) +#endif + /* Configure DSPI module */ + move.l #0xFC05C000, %a0 + move.l #0x80FF0C00, (%a0) /* Master, clear TX/RX FIFO */ + + move.l #0xFC05C00C, %a0 +#ifdef CONFIG_MCF5441x + move.l #0x3E000016, (%a0) +#endif +#ifdef CONFIG_MCF5445x + move.l #0x3E000011, (%a0) +#endif + + move.l #0xFC05C034, %a2 /* dtfr */ + move.l #0xFC05C03B, %a3 /* drfr */ + + move.l #(ASM_SBF_IMG_HDR + 4), %a1 + move.l (%a1)+, %d5 + move.l (%a1), %a4 + + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_SBFHDR_DATA_OFFSET), %a0 + move.l #(CONFIG_SYS_SBFHDR_SIZE), %d4 + + move.l #0xFC05C02C, %a1 /* dspi status */ + + /* Issue commands and address */ + move.l #0x8002000B, %d2 /* Fast Read Cmd */ + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + move.l #0x80020000, %d2 /* Address byte 2 */ + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + move.l #0x80020000, %d2 /* Address byte 1 */ + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + move.l #0x80020000, %d2 /* Address byte 0 */ + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + move.l #0x80020000, %d2 /* Dummy Wr and Rd */ + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + /* Transfer serial boot header to sram */ +asm_dspi_rd_loop1: + move.l #0x80020000, %d2 + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + move.b %d1, (%a0) /* read, copy to dst */ + + add.l #1, %a0 /* inc dst by 1 */ + sub.l #1, %d4 /* dec cnt by 1 */ + bne asm_dspi_rd_loop1 + + /* Transfer u-boot from serial flash to memory */ +asm_dspi_rd_loop2: + move.l #0x80020000, %d2 + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + move.b %d1, (%a4) /* read, copy to dst */ + + add.l #1, %a4 /* inc dst by 1 */ + sub.l #1, %d5 /* dec cnt by 1 */ + bne asm_dspi_rd_loop2 + + move.l #0x00020000, %d2 /* Terminate */ + jsr asm_dspi_wr_status + jsr asm_dspi_rd_status + + /* jump to memory and execute */ + move.l #(CONFIG_SYS_TEXT_BASE + 0x400), %a0 + jmp (%a0) + +asm_dspi_wr_status: + move.l (%a1), %d0 /* status */ + and.l #0x0000F000, %d0 + cmp.l #0x00003000, %d0 + bgt asm_dspi_wr_status + + move.l %d2, (%a2) + rts + +asm_dspi_rd_status: + move.l (%a1), %d0 /* status */ + and.l #0x000000F0, %d0 + lsr.l #4, %d0 + cmp.l #0, %d0 + beq asm_dspi_rd_status + + move.b (%a3), %d1 + rts +#endif /* CONFIG_CF_SBF */ + +#ifdef CONFIG_SYS_NAND_BOOT + /* copy 4 boot pages to dram as soon as possible */ + /* each page is 996 bytes (1056 total with 60 ECC bytes */ + move.l #0x00000000, %a1 /* src */ + move.l #TEXT_BASE, %a2 /* dst */ + move.l #0x3E0, %d0 /* sz in long */ + +asm_boot_nand_copy: + move.l (%a1)+, (%a2)+ + subq.l #1, %d0 + bne asm_boot_nand_copy + + /* jump to memory and execute */ + move.l #(asm_nand_init), %a0 + jmp (%a0) + +asm_nand_init: + /* exit nand boot-mode */ + move.l #0xFC0FFF30, %a1 + or.l #0x00000040, %d1 + move.l %d1, (%a1) + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(CACR_STATUS), %a1 /* CACR */ + move.l #(ICACHE_STATUS), %a2 /* icache */ + move.l #(DCACHE_STATUS), %a3 /* dcache */ + move.l %d0, (%a1) + move.l %d0, (%a2) + move.l %d0, (%a3) + + /* invalidate and disable cache */ + move.l #0x01004100, %d0 /* Invalidate cache cmd */ + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + movec %d0, %ACR2 + movec %d0, %ACR3 + + /* Must disable global address */ + move.l #0xFC008000, %a1 + move.l #(CONFIG_SYS_CS0_BASE), (%a1) + move.l #0xFC008008, %a1 + move.l #(CONFIG_SYS_CS0_CTRL), (%a1) + move.l #0xFC008004, %a1 + move.l #(CONFIG_SYS_CS0_MASK), (%a1) + + /* NAND port configuration */ + move.l #0xEC094048, %a1 + move.b #0xFD, (%a1)+ + move.b #0x5F, (%a1)+ + move.b #0x04, (%a1)+ + + /* reset nand */ + move.l #0xFC0FFF38, %a1 /* isr */ + move.l #0x000e0000, (%a1) + move.l #0xFC0FFF08, %a2 + move.l #0x00000000, (%a2)+ /* car */ + move.l #0x11000000, (%a2)+ /* rar */ + move.l #0x00000000, (%a2)+ /* rpt */ + move.l #0x00000000, (%a2)+ /* rai */ + move.l #0xFC0FFF2c, %a2 /* cfg */ + move.l #0x00000000, (%a2)+ /* secsz */ + move.l #0x000e0681, (%a2)+ + move.l #0xFC0FFF04, %a2 /* cmd2 */ + move.l #0xFF404001, (%a2) + move.l #0x000e0000, (%a1) + + move.l #0x2000, %d1 + jsr asm_delay + + /* setup nand */ + move.l #0xFC0FFF00, %a1 + move.l #0x30700000, (%a1)+ /* cmd1 */ + move.l #0x007EF000, (%a1)+ /* cmd2 */ + + move.l #0xFC0FFF2C, %a1 + move.l #0x00000841, (%a1)+ /* secsz */ + move.l #0x000e0681, (%a1)+ /* cfg */ + + move.l #100, %d4 /* 100 pages ~200KB */ + move.l #4, %d2 /* start at 4 */ + move.l #0xFC0FFF04, %a0 /* cmd2 */ + move.l #0xFC0FFF0C, %a1 /* rar */ + move.l #(TEXT_BASE + 0xF80), %a2 /* dst */ + +asm_nand_read: + move.l #0x11000000, %d0 /* rar */ + or.l %d2, %d0 + move.l %d0, (%a1) + add.l #1, %d2 + + move.l (%a0), %d0 /* cmd2 */ + or.l #1, %d0 + move.l %d0, (%a0) + + move.l #0x200, %d1 + jsr asm_delay + +asm_nand_chk_status: + move.l #0xFC0FFF38, %a4 /* isr */ + move.l (%a4), %d0 + and.l #0x40000000, %d0 + tst.l %d0 + beq asm_nand_chk_status + + move.l #0xFC0FFF38, %a4 /* isr */ + move.l (%a4), %d0 + or.l #0x000E0000, %d0 + move.l %d0, (%a4) + + move.l #0x200, %d3 + move.l #0xFC0FC000, %a3 /* buf 1 */ +asm_nand_copy: + move.l (%a3)+, (%a2)+ + subq.l #1, %d3 + bgt asm_nand_copy + + subq.l #1, %d4 + bgt asm_nand_read + + /* jump to memory and execute */ + move.l #(TEXT_BASE + 0x400), %a0 + jmp (%a0) + +#endif /* CONFIG_SYS_NAND_BOOT */ + +asm_delay: + nop + subq.l #1, %d1 + bne asm_delay + rts +#endif /* CONFIG_CF_SBF || CONFIG_NAND_U_BOOT */ + + .text + . = 0x400 + .globl _start +_start: +#if !defined(CONFIG_SERIAL_BOOT) + nop + nop + move.w #0x2700,%sr /* Mask off Interrupt */ + + /* Set vector base register at the beginning of the Flash */ + move.l #CONFIG_SYS_FLASH_BASE, %d0 + movec %d0, %VBR + + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 + + /* initialize general use internal ram */ + move.l #0, %d0 + move.l #(ICACHE_STATUS), %a1 /* icache */ + move.l #(DCACHE_STATUS), %a2 /* dcache */ + move.l %d0, (%a1) + move.l %d0, (%a2) + + /* invalidate and disable cache */ + move.l #(CONFIG_SYS_ICACHE_INV + CONFIG_SYS_DCACHE_INV), %d0 + movec %d0, %CACR /* Invalidate cache */ + move.l #0, %d0 + movec %d0, %ACR0 + movec %d0, %ACR1 + movec %d0, %ACR2 + movec %d0, %ACR3 +#else + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0 + movec %d0, %RAMBAR1 +#endif + + /* set stackpointer to end of internal ram to get some stackspace for + the first c-code */ + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp + clr.l %sp@- + + move.l #__got_start, %a5 /* put relocation table address to a5 */ + + bsr cpu_init_f /* run low-level CPU init code (from flash) */ + bsr board_init_f /* run low-level board init code (from flash) */ + + /* board_init_f() does not return */ + +/*------------------------------------------------------------------------------*/ + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * r3 = dest + * r4 = src + * r5 = length in bytes + * r6 = cachelinesize + */ + .globl relocate_code +relocate_code: + link.w %a6,#0 + move.l 8(%a6), %sp /* set new stack pointer */ + + move.l 12(%a6), %d0 /* Save copy of Global Data pointer */ + move.l 16(%a6), %a0 /* Save copy of Destination Address */ + + move.l #CONFIG_SYS_MONITOR_BASE, %a1 + move.l #__init_end, %a2 + move.l %a0, %a3 + + /* copy the code to RAM */ +1: + move.l (%a1)+, (%a3)+ + cmp.l %a1,%a2 + bgt.s 1b + +/* + * We are done. Do not return, instead branch to second part of board + * initialization, now running from RAM. + */ + move.l %a0, %a1 + add.l #(in_ram - CONFIG_SYS_MONITOR_BASE), %a1 + jmp (%a1) + +in_ram: + +clear_bss: + /* + * Now clear BSS segment + */ + move.l %a0, %a1 + add.l #(_sbss - CONFIG_SYS_MONITOR_BASE),%a1 + move.l %a0, %d1 + add.l #(_ebss - CONFIG_SYS_MONITOR_BASE),%d1 +6: + clr.l (%a1)+ + cmp.l %a1,%d1 + bgt.s 6b + + /* + * fix got table in RAM + */ + move.l %a0, %a1 + add.l #(__got_start - CONFIG_SYS_MONITOR_BASE),%a1 + move.l %a1,%a5 /* * fix got pointer register a5 */ + + move.l %a0, %a2 + add.l #(__got_end - CONFIG_SYS_MONITOR_BASE),%a2 + +7: + move.l (%a1),%d1 + sub.l #_start,%d1 + add.l %a0,%d1 + move.l %d1,(%a1)+ + cmp.l %a2, %a1 + bne 7b + + /* calculate relative jump to board_init_r in ram */ + move.l %a0, %a1 + add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1 + + /* set parameters for board_init_r */ + move.l %a0,-(%sp) /* dest_addr */ + move.l %d0,-(%sp) /* gd */ + jsr (%a1) + +/*------------------------------------------------------------------------------*/ +/* exception code */ + .globl _fault +_fault: + bra _fault + .globl _exc_handler + +_exc_handler: + SAVE_ALL + movel %sp,%sp@- + bsr exc_handler + addql #4,%sp + RESTORE_ALL + + .globl _int_handler +_int_handler: + SAVE_ALL + movel %sp,%sp@- + bsr int_handler + addql #4,%sp + RESTORE_ALL + +/*------------------------------------------------------------------------------*/ + + .globl version_string +version_string: + .ascii U_BOOT_VERSION_STRING, "\0" + .align 4