X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Fblackfin%2Fcpu%2Fcpu.c;fp=qemu%2Froms%2Fu-boot%2Farch%2Fblackfin%2Fcpu%2Fcpu.c;h=2409c300ed1441e6660fbd8475ae3e5ee01023f4;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/arch/blackfin/cpu/cpu.c b/qemu/roms/u-boot/arch/blackfin/cpu/cpu.c
new file mode 100644
index 000000000..2409c300e
--- /dev/null
+++ b/qemu/roms/u-boot/arch/blackfin/cpu/cpu.c
@@ -0,0 +1,152 @@
+/*
+ * U-boot - cpu.c CPU specific functions
+ *
+ * Copyright (c) 2005-2008 Analog Devices Inc.
+ *
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/blackfin.h>
+#include <asm/cplb.h>
+#include <asm/mach-common/bits/core.h>
+#include <asm/mach-common/bits/ebiu.h>
+#include <asm/mach-common/bits/trace.h>
+#include <asm/serial.h>
+
+#include "cpu.h"
+#include "initcode.h"
+
+ulong bfin_poweron_retx;
+
+#if defined(CONFIG_CORE1_RUN) && defined(COREB_L1_CODE_START)
+void bfin_core1_start(void)
+{
+#ifdef BF561_FAMILY
+	/* Enable core 1 */
+	bfin_write_SYSCR(bfin_read_SYSCR() & ~0x0020);
+#else
+	/* Enable core 1 */
+	bfin_write32(RCU0_SVECT1, COREB_L1_CODE_START);
+	bfin_write32(RCU0_CRCTL, 0);
+
+	bfin_write32(RCU0_CRCTL, 0x2);
+
+	/* Check if core 1 starts */
+	while (!(bfin_read32(RCU0_CRSTAT) & 0x2))
+		continue;
+
+	bfin_write32(RCU0_CRCTL, 0);
+
+	/* flag to notify cces core 1 application */
+	bfin_write32(SDU0_MSG_SET, (1 << 19));
+#endif
+}
+#endif
+
+__attribute__ ((__noreturn__))
+void cpu_init_f(ulong bootflag, ulong loaded_from_ldr)
+{
+#ifndef CONFIG_BFIN_BOOTROM_USES_EVT1
+	/* Build a NOP slide over the LDR jump block.  Whee! */
+	char nops[0xC];
+	serial_early_puts("NOP Slide\n");
+	memset(nops, 0x00, sizeof(nops));
+	memcpy((void *)L1_INST_SRAM, nops, sizeof(nops));
+#endif
+
+	if (!loaded_from_ldr) {
+		/* Relocate sections into L1 if the LDR didn't do it -- don't
+		 * check length because the linker script does the size
+		 * checking at build time.
+		 */
+		serial_early_puts("L1 Relocate\n");
+		extern char _stext_l1[], _text_l1_lma[], _text_l1_len[];
+		memcpy(&_stext_l1, &_text_l1_lma, (unsigned long)_text_l1_len);
+		extern char _sdata_l1[], _data_l1_lma[], _data_l1_len[];
+		memcpy(&_sdata_l1, &_data_l1_lma, (unsigned long)_data_l1_len);
+	}
+
+	/*
+	 * Make sure our async settings are committed.  Some bootroms
+	 * (like the BF537) will reset some registers on us after it
+	 * has finished loading the LDR.  Or if we're booting over
+	 * JTAG, the initcode never got a chance to run.  Or if we
+	 * aren't booting from parallel flash, the initcode skipped
+	 * this step completely.
+	 */
+	program_async_controller(NULL);
+
+	/* Save RETX so we can pass it while booting Linux */
+	bfin_poweron_retx = bootflag;
+
+#ifdef CONFIG_DEBUG_DUMP
+	/* Turn on hardware trace buffer */
+	bfin_write_TBUFCTL(TBUFPWR | TBUFEN);
+#endif
+
+#ifndef CONFIG_PANIC_HANG
+	/* Reset upon a double exception rather than just hanging.
+	 * Do not do bfin_read on SWRST as that will reset status bits.
+	 */
+# ifdef SWRST
+	bfin_write_SWRST(DOUBLE_FAULT);
+# endif
+#endif
+
+#if defined(CONFIG_CORE1_RUN) && defined(COREB_L1_CODE_START)
+	bfin_core1_start();
+#endif
+
+	serial_early_puts("Board init flash\n");
+	board_init_f(bootflag);
+
+	/* should not be reached */
+	while (1);
+}
+
+int exception_init(void)
+{
+	bfin_write_EVT3(trap);
+	return 0;
+}
+
+int irq_init(void)
+{
+#ifdef SIC_IMASK0
+	bfin_write_SIC_IMASK0(0);
+	bfin_write_SIC_IMASK1(0);
+# ifdef SIC_IMASK2
+	bfin_write_SIC_IMASK2(0);
+# endif
+#elif defined(SICA_IMASK0)
+	bfin_write_SICA_IMASK0(0);
+	bfin_write_SICA_IMASK1(0);
+#elif defined(SIC_IMASK)
+	bfin_write_SIC_IMASK(0);
+#endif
+	/* Set up a dummy NMI handler if needed.  */
+	if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_BYPASS || ANOMALY_05000219)
+		bfin_write_EVT2(evt_nmi);	/* NMI */
+	bfin_write_EVT5(evt_default);	/* hardware error */
+	bfin_write_EVT6(evt_default);	/* core timer */
+	bfin_write_EVT7(evt_default);
+	bfin_write_EVT8(evt_default);
+	bfin_write_EVT9(evt_default);
+	bfin_write_EVT10(evt_default);
+	bfin_write_EVT11(evt_default);
+	bfin_write_EVT12(evt_default);
+	bfin_write_EVT13(evt_default);
+	bfin_write_EVT14(evt_default);
+	bfin_write_EVT15(evt_default);
+	bfin_write_ILAT(0);
+	CSYNC();
+	/* enable hardware error irq */
+	irq_flags = 0x3f;
+	local_irq_enable();
+	return 0;
+}