X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Farm%2Finclude%2Fasm%2Farch-omap5%2Fsys_proto.h;fp=qemu%2Froms%2Fu-boot%2Farch%2Farm%2Finclude%2Fasm%2Farch-omap5%2Fsys_proto.h;h=bf12c7337247e9e969a826d1c1da34fd27f99e64;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/arch/arm/include/asm/arch-omap5/sys_proto.h b/qemu/roms/u-boot/arch/arm/include/asm/arch-omap5/sys_proto.h
new file mode 100644
index 000000000..bf12c7337
--- /dev/null
+++ b/qemu/roms/u-boot/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+#include <asm/arch/omap.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/omap_common.h>
+#include <linux/mtd/omap_gpmc.h>
+#include <asm/arch/clock.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct pad_conf_entry {
+	u32 offset;
+	u32 val;
+};
+
+struct omap_sysinfo {
+	char *board_string;
+};
+extern const struct omap_sysinfo sysinfo;
+
+void gpmc_init(void);
+void watchdog_init(void);
+u32 get_device_type(void);
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
+void set_muxconf_regs_essential(void);
+u32 wait_on_value(u32, u32, void *, u32);
+void sdelay(unsigned long);
+void setup_clocks_for_console(void);
+void prcm_init(void);
+void bypass_dpll(u32 const base);
+void freq_update_core(void);
+u32 get_sys_clk_freq(void);
+u32 omap5_ddr_clk(void);
+void cancel_out(u32 *num, u32 *den, u32 den_limit);
+void sdram_init(void);
+u32 omap_sdram_size(void);
+u32 cortex_rev(void);
+void save_omap_boot_params(void);
+void init_omap_revision(void);
+void do_io_settings(void);
+void sri2c_init(void);
+void gpi2c_init(void);
+int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
+u32 warm_reset(void);
+void force_emif_self_refresh(void);
+void get_ioregs(const struct ctrl_ioregs **regs);
+void srcomp_enable(void);
+void setup_warmreset_time(void);
+
+static inline u32 running_from_sdram(void)
+{
+	u32 pc;
+	asm volatile ("mov %0, pc" : "=r" (pc));
+	return ((pc >= OMAP54XX_DRAM_ADDR_SPACE_START) &&
+	    (pc < OMAP54XX_DRAM_ADDR_SPACE_END));
+}
+
+static inline u8 uboot_loaded_by_spl(void)
+{
+	/*
+	 * u-boot can be running from sdram either because of configuration
+	 * Header or by SPL. If because of CH, then the romcode sets the
+	 * CHSETTINGS executed bit to true in the boot parameter structure that
+	 * it passes to the bootloader.This parameter is stored in the ch_flags
+	 * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
+	 * mandatory section if CH is present.
+	 */
+	if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
+		return 0;
+	else
+		return running_from_sdram();
+}
+/*
+ * The basic hardware init of OMAP(s_init()) can happen in 4
+ * different contexts:
+ *  1. SPL running from SRAM
+ *  2. U-Boot running from FLASH
+ *  3. Non-XIP U-Boot loaded to SDRAM by SPL
+ *  4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
+ *     Configuration Header feature
+ *
+ * This function finds this context.
+ * Defining as inline may help in compiling out unused functions in SPL
+ */
+static inline u32 omap_hw_init_context(void)
+{
+#ifdef CONFIG_SPL_BUILD
+	return OMAP_INIT_CONTEXT_SPL;
+#else
+	if (uboot_loaded_by_spl())
+		return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
+	else if (running_from_sdram())
+		return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
+	else
+		return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
+#endif
+}
+
+static inline u32 div_round_up(u32 num, u32 den)
+{
+	return (num + den - 1)/den;
+}
+
+static inline u32 usec_to_32k(u32 usec)
+{
+	return div_round_up(32768 * usec, 1000000);
+}
+#endif