X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Farm%2Fcpu%2Farmv7%2Fam33xx%2Fboard.c;fp=qemu%2Froms%2Fu-boot%2Farch%2Farm%2Fcpu%2Farmv7%2Fam33xx%2Fboard.c;h=28c16f8d02e34befedb6a9473dd1d24f782e7bd1;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/roms/u-boot/arch/arm/cpu/armv7/am33xx/board.c b/qemu/roms/u-boot/arch/arm/cpu/armv7/am33xx/board.c new file mode 100644 index 000000000..28c16f8d0 --- /dev/null +++ b/qemu/roms/u-boot/arch/arm/cpu/armv7/am33xx/board.c @@ -0,0 +1,251 @@ +/* + * board.c + * + * Common board functions for AM33XX based boards + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +static const struct gpio_bank gpio_bank_am33xx[] = { + { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO2_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO3_BASE, METHOD_GPIO_24XX }, +#ifdef CONFIG_AM43XX + { (void *)AM33XX_GPIO4_BASE, METHOD_GPIO_24XX }, + { (void *)AM33XX_GPIO5_BASE, METHOD_GPIO_24XX }, +#endif +}; + +const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx; + +#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD) +int cpu_mmc_init(bd_t *bis) +{ + int ret; + + ret = omap_mmc_init(0, 0, 0, -1, -1); + if (ret) + return ret; + + return omap_mmc_init(1, 0, 0, -1, -1); +} +#endif + +/* AM33XX has two MUSB controllers which can be host or gadget */ +#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \ + (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +/* USB 2.0 PHY Control */ +#define CM_PHY_PWRDN (1 << 0) +#define CM_PHY_OTG_PWRDN (1 << 1) +#define OTGVDET_EN (1 << 19) +#define OTGSESSENDEN (1 << 20) + +static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr) +{ + if (on) { + clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN, + OTGVDET_EN | OTGSESSENDEN); + } else { + clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN); + } +} + +static struct musb_hdrc_config musb_config = { + .multipoint = 1, + .dyn_fifo = 1, + .num_eps = 16, + .ram_bits = 12, +}; + +#ifdef CONFIG_AM335X_USB0 +static void am33xx_otg0_set_phy_power(u8 on) +{ + am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0); +} + +struct omap_musb_board_data otg0_board_data = { + .set_phy_power = am33xx_otg0_set_phy_power, +}; + +static struct musb_hdrc_platform_data otg0_plat = { + .mode = CONFIG_AM335X_USB0_MODE, + .config = &musb_config, + .power = 50, + .platform_ops = &musb_dsps_ops, + .board_data = &otg0_board_data, +}; +#endif + +#ifdef CONFIG_AM335X_USB1 +static void am33xx_otg1_set_phy_power(u8 on) +{ + am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1); +} + +struct omap_musb_board_data otg1_board_data = { + .set_phy_power = am33xx_otg1_set_phy_power, +}; + +static struct musb_hdrc_platform_data otg1_plat = { + .mode = CONFIG_AM335X_USB1_MODE, + .config = &musb_config, + .power = 50, + .platform_ops = &musb_dsps_ops, + .board_data = &otg1_board_data, +}; +#endif +#endif + +int arch_misc_init(void) +{ +#ifdef CONFIG_AM335X_USB0 + musb_register(&otg0_plat, &otg0_board_data, + (void *)USB0_OTG_BASE); +#endif +#ifdef CONFIG_AM335X_USB1 + musb_register(&otg1_plat, &otg1_board_data, + (void *)USB1_OTG_BASE); +#endif + return 0; +} + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +/* + * This function is the place to do per-board things such as ramp up the + * MPU clock frequency. + */ +__weak void am33xx_spl_board_init(void) +{ + do_setup_dpll(&dpll_core_regs, &dpll_core_opp100); + do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100); +} + +#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) +static void rtc32k_enable(void) +{ + struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE; + + /* + * Unlock the RTC's registers. For more details please see the + * RTC_SS section of the TRM. In order to unlock we need to + * write these specific values (keys) in this order. + */ + writel(RTC_KICK0R_WE, &rtc->kick0r); + writel(RTC_KICK1R_WE, &rtc->kick1r); + + /* Enable the RTC 32K OSC by setting bits 3 and 6. */ + writel((1 << 3) | (1 << 6), &rtc->osc); +} +#endif + +static void uart_soft_reset(void) +{ + struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; + u32 regval; + + regval = readl(&uart_base->uartsyscfg); + regval |= UART_RESET; + writel(regval, &uart_base->uartsyscfg); + while ((readl(&uart_base->uartsyssts) & + UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK) + ; + + /* Disable smart idle */ + regval = readl(&uart_base->uartsyscfg); + regval |= UART_SMART_IDLE_EN; + writel(regval, &uart_base->uartsyscfg); +} + +static void watchdog_disable(void) +{ + struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; + + writel(0xAAAA, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; + writel(0x5555, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; +} + +void s_init(void) +{ + /* + * The ROM will only have set up sufficient pinmux to allow for the + * first 4KiB NOR to be read, we must finish doing what we know of + * the NOR mux in this space in order to continue. + */ +#ifdef CONFIG_NOR_BOOT + enable_norboot_pin_mux(); +#endif + /* + * Save the boot parameters passed from romcode. + * We cannot delay the saving further than this, + * to prevent overwrites. + */ +#ifdef CONFIG_SPL_BUILD + save_omap_boot_params(); +#endif + watchdog_disable(); + timer_init(); + set_uart_mux_conf(); + setup_clocks_for_console(); + uart_soft_reset(); +#ifdef CONFIG_NOR_BOOT + gd->baudrate = CONFIG_BAUDRATE; + serial_init(); + gd->have_console = 1; +#elif defined(CONFIG_SPL_BUILD) + gd = &gdata; + preloader_console_init(); +#endif + prcm_init(); + set_mux_conf_regs(); +#if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC) + /* Enable RTC32K clock */ + rtc32k_enable(); +#endif + sdram_init(); +} +#endif + +#ifndef CONFIG_SYS_DCACHE_OFF +void enable_caches(void) +{ + /* Enable D-cache. I-cache is already enabled in start.S */ + dcache_enable(); +} +#endif /* !CONFIG_SYS_DCACHE_OFF */