X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Farm%2Fcpu%2Farm926ejs%2Fspear%2Fstart.S;fp=qemu%2Froms%2Fu-boot%2Farch%2Farm%2Fcpu%2Farm926ejs%2Fspear%2Fstart.S;h=7dbd5dbf99e8c6e216cc50e789ec7f103e0ecaea;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/arch/arm/cpu/arm926ejs/spear/start.S b/qemu/roms/u-boot/arch/arm/cpu/arm926ejs/spear/start.S
new file mode 100644
index 000000000..7dbd5dbf9
--- /dev/null
+++ b/qemu/roms/u-boot/arch/arm/cpu/arm926ejs/spear/start.S
@@ -0,0 +1,106 @@
+/*
+ *  armboot - Startup Code for ARM926EJS CPU-core
+ *
+ *  Copyright (c) 2003  Texas Instruments
+ *
+ *  ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
+ *
+ *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
+ *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
+ *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
+ *  Copyright (c) 2003	Richard Woodruff <r-woodruff2@ti.com>
+ *  Copyright (c) 2003	Kshitij <kshitij@ti.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+
+#include <config.h>
+
+.globl _start
+_start:
+	b	reset
+	ldr	pc, _undefined_instruction
+	ldr	pc, _software_interrupt
+	ldr	pc, _prefetch_abort
+	ldr	pc, _data_abort
+	ldr	pc, _not_used
+	ldr	pc, _irq
+	ldr	pc, _fiq
+
+_undefined_instruction:
+_software_interrupt:
+_prefetch_abort:
+_data_abort:
+_not_used:
+_irq:
+_fiq:
+	.word infinite_loop
+
+infinite_loop:
+	b	infinite_loop
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * Below are the critical initializations already taken place in BootROM.
+ * So, these are not taken care in Xloader
+ * 1. Relocation to RAM
+ * 2. Initializing stacks
+ *
+ *************************************************************************
+ */
+
+/*
+ * the actual reset code
+ */
+
+reset:
+/*
+ * Xloader has to return back to BootROM in a few cases.
+ * eg. Ethernet boot, UART boot, USB boot
+ * Saving registers for returning back
+ */
+	stmdb	sp!, {r0-r12,r14}
+	bl	cpu_init_crit
+/*
+ * Clearing bss area is not done in Xloader.
+ * BSS area lies in the DDR location which is not yet initialized
+ * bss is assumed to be uninitialized.
+ */
+	bl	spl_boot
+	ldmia	sp!, {r0-r12,pc}
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+cpu_init_crit:
+	/*
+	 * flush v4 I/D caches
+	 */
+	mov	r0, #0
+	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
+	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
+
+	/*
+	 * enable instruction cache
+	 */
+	mrc	p15, 0, r0, c1, c0, 0
+	orr	r0, r0, #0x00001000	/* set bit 12 (I) I-Cache */
+	mcr	p15, 0, r0, c1, c0, 0
+
+	/*
+	 * Go setup Memory and board specific bits prior to relocation.
+	 */
+	stmdb	sp!, {lr}
+	bl	lowlevel_init	/* go setup pll,mux,memory */
+	ldmia	sp!, {pc}