X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fu-boot%2Farch%2Farm%2Fcpu%2Farm926ejs%2Farmada100%2Fcpu.c;fp=qemu%2Froms%2Fu-boot%2Farch%2Farm%2Fcpu%2Farm926ejs%2Farmada100%2Fcpu.c;h=8b02d0be085a0ea088592a6578a3cf959f57c93e;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/cpu.c b/qemu/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/cpu.c
new file mode 100644
index 000000000..8b02d0be0
--- /dev/null
+++ b/qemu/roms/u-boot/arch/arm/cpu/arm926ejs/armada100/cpu.c
@@ -0,0 +1,92 @@
+/*
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ * Contributor: Mahavir Jain <mjain@marvell.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/armada100.h>
+
+#define UARTCLK14745KHZ	(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(1))
+#define SET_MRVL_ID	(1<<8)
+#define L2C_RAM_SEL	(1<<4)
+
+int arch_cpu_init(void)
+{
+	u32 val;
+	struct armd1cpu_registers *cpuregs =
+		(struct armd1cpu_registers *) ARMD1_CPU_BASE;
+
+	struct armd1apb1_registers *apb1clkres =
+		(struct armd1apb1_registers *) ARMD1_APBC1_BASE;
+
+	struct armd1mpmu_registers *mpmu =
+		(struct armd1mpmu_registers *) ARMD1_MPMU_BASE;
+
+	/* set SEL_MRVL_ID bit in ARMADA100_CPU_CONF register */
+	val = readl(&cpuregs->cpu_conf);
+	val = val | SET_MRVL_ID;
+	writel(val, &cpuregs->cpu_conf);
+
+	/* Enable Clocks for all hardware units */
+	writel(0xFFFFFFFF, &mpmu->acgr);
+
+	/* Turn on AIB and AIB-APB Functional clock */
+	writel(APBC_APBCLK | APBC_FNCLK, &apb1clkres->aib);
+
+	/* ensure L2 cache is not mapped as SRAM */
+	val = readl(&cpuregs->cpu_conf);
+	val = val & ~(L2C_RAM_SEL);
+	writel(val, &cpuregs->cpu_conf);
+
+	/* Enable GPIO clock */
+	writel(APBC_APBCLK, &apb1clkres->gpio);
+
+#ifdef CONFIG_I2C_MV
+	/* Enable general I2C clock */
+	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
+	writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi0);
+
+	/* Enable power I2C clock */
+	writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
+	writel(APBC_FNCLK | APBC_APBCLK, &apb1clkres->twsi1);
+#endif
+
+	/*
+	 * Enable Functional and APB clock at 14.7456MHz
+	 * for configured UART console
+	 */
+#if (CONFIG_SYS_NS16550_COM1 == ARMD1_UART3_BASE)
+	writel(UARTCLK14745KHZ, &apb1clkres->uart3);
+#elif (CONFIG_SYS_NS16550_COM1 == ARMD1_UART2_BASE)
+	writel(UARTCLK14745KHZ, &apb1clkres->uart2);
+#else
+	writel(UARTCLK14745KHZ, &apb1clkres->uart1);
+#endif
+	icache_enable();
+
+	return 0;
+}
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+	u32 id;
+	struct armd1cpu_registers *cpuregs =
+		(struct armd1cpu_registers *) ARMD1_CPU_BASE;
+
+	id = readl(&cpuregs->chip_id);
+	printf("SoC:   Armada 88AP%X-%X\n", (id & 0xFFF), (id >> 0x10));
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_I2C_MV
+void i2c_clk_enable(void)
+{
+}
+#endif