X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fseabios%2Fsrc%2Fhw%2Fusb-hid.c;fp=qemu%2Froms%2Fseabios%2Fsrc%2Fhw%2Fusb-hid.c;h=09a6cf455e01668e805881c6afe3f044cb901d7c;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/roms/seabios/src/hw/usb-hid.c b/qemu/roms/seabios/src/hw/usb-hid.c new file mode 100644 index 000000000..09a6cf455 --- /dev/null +++ b/qemu/roms/seabios/src/hw/usb-hid.c @@ -0,0 +1,432 @@ +// Code for handling USB Human Interface Devices (HID). +// +// Copyright (C) 2009 Kevin O'Connor +// +// This file may be distributed under the terms of the GNU LGPLv3 license. + +#include "biosvar.h" // GET_GLOBAL +#include "config.h" // CONFIG_* +#include "output.h" // dprintf +#include "ps2port.h" // ATKBD_CMD_GETID +#include "usb.h" // usb_ctrlrequest +#include "usb-hid.h" // usb_keyboard_setup +#include "util.h" // process_key + +struct usb_pipe *keyboard_pipe VARFSEG; +struct usb_pipe *mouse_pipe VARFSEG; + + +/**************************************************************** + * Setup + ****************************************************************/ + +// Send USB HID protocol message. +static int +set_protocol(struct usb_pipe *pipe, u16 val) +{ + struct usb_ctrlrequest req; + req.bRequestType = USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE; + req.bRequest = HID_REQ_SET_PROTOCOL; + req.wValue = val; + req.wIndex = 0; + req.wLength = 0; + return usb_send_default_control(pipe, &req, NULL); +} + +// Send USB HID SetIdle request. +static int +set_idle(struct usb_pipe *pipe, int ms) +{ + struct usb_ctrlrequest req; + req.bRequestType = USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE; + req.bRequest = HID_REQ_SET_IDLE; + req.wValue = (ms/4)<<8; + req.wIndex = 0; + req.wLength = 0; + return usb_send_default_control(pipe, &req, NULL); +} + +#define KEYREPEATWAITMS 500 +#define KEYREPEATMS 33 + +static int +usb_kbd_setup(struct usbdevice_s *usbdev + , struct usb_endpoint_descriptor *epdesc) +{ + if (! CONFIG_USB_KEYBOARD) + return -1; + if (keyboard_pipe) + // XXX - this enables the first found keyboard (could be random) + return -1; + + if (epdesc->wMaxPacketSize != 8) + return -1; + + // Enable "boot" protocol. + int ret = set_protocol(usbdev->defpipe, 0); + if (ret) + return -1; + // Periodically send reports to enable key repeat. + ret = set_idle(usbdev->defpipe, KEYREPEATMS); + if (ret) + return -1; + + keyboard_pipe = usb_alloc_pipe(usbdev, epdesc); + if (!keyboard_pipe) + return -1; + + dprintf(1, "USB keyboard initialized\n"); + return 0; +} + +static int +usb_mouse_setup(struct usbdevice_s *usbdev + , struct usb_endpoint_descriptor *epdesc) +{ + if (! CONFIG_USB_MOUSE) + return -1; + if (mouse_pipe) + // XXX - this enables the first found mouse (could be random) + return -1; + + if (epdesc->wMaxPacketSize < 3 || epdesc->wMaxPacketSize > 8) + return -1; + + // Enable "boot" protocol. + int ret = set_protocol(usbdev->defpipe, 0); + if (ret) + return -1; + + mouse_pipe = usb_alloc_pipe(usbdev, epdesc); + if (!mouse_pipe) + return -1; + + dprintf(1, "USB mouse initialized\n"); + return 0; +} + +// Initialize a found USB HID device (if applicable). +int +usb_hid_setup(struct usbdevice_s *usbdev) +{ + if (! CONFIG_USB_KEYBOARD && ! CONFIG_USB_MOUSE) + return -1; + dprintf(2, "usb_hid_setup %p\n", usbdev->defpipe); + + struct usb_interface_descriptor *iface = usbdev->iface; + if (iface->bInterfaceSubClass != USB_INTERFACE_SUBCLASS_BOOT) + // Doesn't support boot protocol. + return -1; + + // Find intr in endpoint. + struct usb_endpoint_descriptor *epdesc = usb_find_desc( + usbdev, USB_ENDPOINT_XFER_INT, USB_DIR_IN); + if (!epdesc) { + dprintf(1, "No usb hid intr in?\n"); + return -1; + } + + if (iface->bInterfaceProtocol == USB_INTERFACE_PROTOCOL_KEYBOARD) + return usb_kbd_setup(usbdev, epdesc); + if (iface->bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE) + return usb_mouse_setup(usbdev, epdesc); + return -1; +} + + +/**************************************************************** + * Keyboard events + ****************************************************************/ + +// Mapping from USB key id to ps2 key sequence. +static u16 KeyToScanCode[] VAR16 = { + 0x0000, 0x0000, 0x0000, 0x0000, 0x001e, 0x0030, 0x002e, 0x0020, + 0x0012, 0x0021, 0x0022, 0x0023, 0x0017, 0x0024, 0x0025, 0x0026, + 0x0032, 0x0031, 0x0018, 0x0019, 0x0010, 0x0013, 0x001f, 0x0014, + 0x0016, 0x002f, 0x0011, 0x002d, 0x0015, 0x002c, 0x0002, 0x0003, + 0x0004, 0x0005, 0x0006, 0x0007, 0x0008, 0x0009, 0x000a, 0x000b, + 0x001c, 0x0001, 0x000e, 0x000f, 0x0039, 0x000c, 0x000d, 0x001a, + 0x001b, 0x002b, 0x0000, 0x0027, 0x0028, 0x0029, 0x0033, 0x0034, + 0x0035, 0x003a, 0x003b, 0x003c, 0x003d, 0x003e, 0x003f, 0x0040, + 0x0041, 0x0042, 0x0043, 0x0044, 0x0057, 0x0058, 0xe037, 0x0046, + 0xe11d, 0xe052, 0xe047, 0xe049, 0xe053, 0xe04f, 0xe051, 0xe04d, + 0xe04b, 0xe050, 0xe048, 0x0045, 0xe035, 0x0037, 0x004a, 0x004e, + 0xe01c, 0x004f, 0x0050, 0x0051, 0x004b, 0x004c, 0x004d, 0x0047, + 0x0048, 0x0049, 0x0052, 0x0053 +}; + +// Mapping from USB modifier id to ps2 key sequence. +static u16 ModifierToScanCode[] VAR16 = { + //lcntl, lshift, lalt, lgui, rcntl, rshift, ralt, rgui + 0x001d, 0x002a, 0x0038, 0xe05b, 0xe01d, 0x0036, 0xe038, 0xe05c +}; + +#define RELEASEBIT 0x80 + +// Format of USB keyboard event data +struct keyevent { + u8 modifiers; + u8 reserved; + u8 keys[6]; +}; + +// Translate data from KeyToScanCode[] to calls to process_key(). +static void +prockeys(u16 keys) +{ + if (keys > 0xff) { + u8 key = keys>>8; + if (key == 0xe1) { + // Pause key + process_key(0xe1); + process_key(0x1d | (keys & RELEASEBIT)); + process_key(0x45 | (keys & RELEASEBIT)); + return; + } + process_key(key); + } + process_key(keys); +} + +// Handle a USB key press/release event. +static void +procscankey(u8 key, u8 flags) +{ + if (key >= ARRAY_SIZE(KeyToScanCode)) + return; + u16 keys = GET_GLOBAL(KeyToScanCode[key]); + if (keys) + prockeys(keys | flags); +} + +// Handle a USB modifier press/release event. +static void +procmodkey(u8 mods, u8 flags) +{ + int i; + for (i=0; mods; i++) + if (mods & (1<modifiers, data->keys[0]); + + // Load old keys. + struct usbkeyinfo old; + old.data = GET_LOW(LastUSBkey.data); + + // Check for keys no longer pressed. + int addpos = 0; + int i; + for (i=0; i=ARRAY_SIZE(data->keys)) { + // Key released. + procscankey(key, RELEASEBIT); + if (i+1 >= ARRAY_SIZE(old.keys) || !old.keys[i+1]) + // Last pressed key released - disable repeat. + old.repeatcount = 0xff; + break; + } + if (data->keys[j] == key) { + // Key still pressed. + data->keys[j] = 0; + old.keys[addpos++] = key; + break; + } + } + } + procmodkey(old.modifiers & ~data->modifiers, RELEASEBIT); + + // Process new keys + procmodkey(data->modifiers & ~old.modifiers, 0); + old.modifiers = data->modifiers; + for (i=0; ikeys); i++) { + u8 key = data->keys[i]; + if (!key) + continue; + // New key pressed. + procscankey(key, 0); + old.keys[addpos++] = key; + old.repeatcount = KEYREPEATWAITMS / KEYREPEATMS + 1; + } + if (addpos < ARRAY_SIZE(old.keys)) + old.keys[addpos] = 0; + + // Check for key repeat event. + if (addpos) { + if (!old.repeatcount) + procscankey(old.keys[addpos-1], 0); + else if (old.repeatcount != 0xff) + old.repeatcount--; + } + + // Update old keys + SET_LOW(LastUSBkey.data, old.data); +} + +// Check if a USB keyboard event is pending and process it if so. +static void +usb_check_key(void) +{ + if (! CONFIG_USB_KEYBOARD) + return; + struct usb_pipe *pipe = GET_GLOBAL(keyboard_pipe); + if (!pipe) + return; + + for (;;) { + struct keyevent data; + int ret = usb_poll_intr(pipe, &data); + if (ret) + break; + handle_key(&data); + } +} + +// Test if USB keyboard is active. +inline int +usb_kbd_active(void) +{ + if (! CONFIG_USB_KEYBOARD) + return 0; + return GET_GLOBAL(keyboard_pipe) != NULL; +} + +// Handle a ps2 style keyboard command. +inline int +usb_kbd_command(int command, u8 *param) +{ + if (! CONFIG_USB_KEYBOARD) + return -1; + dprintf(9, "usb keyboard cmd=%x\n", command); + switch (command) { + case ATKBD_CMD_GETID: + // Return the id of a standard AT keyboard. + param[0] = 0xab; + param[1] = 0x83; + return 0; + default: + return -1; + } +} + + +/**************************************************************** + * Mouse events + ****************************************************************/ + +// Format of USB mouse event data +struct mouseevent { + u8 buttons; + u8 x, y; + u8 reserved[5]; +}; + +// Process USB mouse data. +static void +handle_mouse(struct mouseevent *data) +{ + dprintf(9, "Got mouse b=%x x=%x y=%x\n", data->buttons, data->x, data->y); + + s8 x = data->x, y = -data->y; + u8 flag = ((data->buttons & 0x7) | (1<<3) + | (x & 0x80 ? (1<<4) : 0) | (y & 0x80 ? (1<<5) : 0)); + process_mouse(flag); + process_mouse(x); + process_mouse(y); +} + +// Check if a USB mouse event is pending and process it if so. +static void +usb_check_mouse(void) +{ + if (! CONFIG_USB_MOUSE) + return; + struct usb_pipe *pipe = GET_GLOBAL(mouse_pipe); + if (!pipe) + return; + + for (;;) { + struct mouseevent data; + int ret = usb_poll_intr(pipe, &data); + if (ret) + break; + handle_mouse(&data); + } +} + +// Test if USB mouse is active. +inline int +usb_mouse_active(void) +{ + if (! CONFIG_USB_MOUSE) + return 0; + return GET_GLOBAL(mouse_pipe) != NULL; +} + +// Handle a ps2 style mouse command. +inline int +usb_mouse_command(int command, u8 *param) +{ + if (! CONFIG_USB_MOUSE) + return -1; + dprintf(9, "usb mouse cmd=%x\n", command); + switch (command) { + case PSMOUSE_CMD_ENABLE: + case PSMOUSE_CMD_DISABLE: + case PSMOUSE_CMD_SETSCALE11: + return 0; + case PSMOUSE_CMD_SETSCALE21: + case PSMOUSE_CMD_SETRATE: + case PSMOUSE_CMD_SETRES: + // XXX + return 0; + case PSMOUSE_CMD_RESET_BAT: + case PSMOUSE_CMD_GETID: + // Return the id of a standard AT mouse. + param[0] = 0xaa; + param[1] = 0x00; + return 0; + + case PSMOUSE_CMD_GETINFO: + param[0] = 0x00; + param[1] = 4; + param[2] = 100; + return 0; + + default: + return -1; + } +} + +// Check for USB events pending - called periodically from timer interrupt. +void +usb_check_event(void) +{ + usb_check_key(); + usb_check_mouse(); +}