X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fipxe%2Fsrc%2Finclude%2Fipxe%2Fefi%2FProtocol%2FCpu.h;fp=qemu%2Froms%2Fipxe%2Fsrc%2Finclude%2Fipxe%2Fefi%2FProtocol%2FCpu.h;h=665924e88088791e49ded76db7a0713c743234d5;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git
diff --git a/qemu/roms/ipxe/src/include/ipxe/efi/Protocol/Cpu.h b/qemu/roms/ipxe/src/include/ipxe/efi/Protocol/Cpu.h
new file mode 100644
index 000000000..665924e88
--- /dev/null
+++ b/qemu/roms/ipxe/src/include/ipxe/efi/Protocol/Cpu.h
@@ -0,0 +1,302 @@
+/** @file
+ CPU Architectural Protocol as defined in PI spec Volume 2 DXE
+
+ This code abstracts the DXE core from processor implementation details.
+
+ Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#ifndef __ARCH_PROTOCOL_CPU_H__
+#define __ARCH_PROTOCOL_CPU_H__
+
+FILE_LICENCE ( BSD3 );
+
+#include
+
+#define EFI_CPU_ARCH_PROTOCOL_GUID \
+ { 0x26baccb1, 0x6f42, 0x11d4, {0xbc, 0xe7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81 } }
+
+typedef struct _EFI_CPU_ARCH_PROTOCOL EFI_CPU_ARCH_PROTOCOL;
+
+///
+/// The type of flush operation
+///
+typedef enum {
+ EfiCpuFlushTypeWriteBackInvalidate,
+ EfiCpuFlushTypeWriteBack,
+ EfiCpuFlushTypeInvalidate,
+ EfiCpuMaxFlushType
+} EFI_CPU_FLUSH_TYPE;
+
+///
+/// The type of processor INIT.
+///
+typedef enum {
+ EfiCpuInit,
+ EfiCpuMaxInitType
+} EFI_CPU_INIT_TYPE;
+
+/**
+ EFI_CPU_INTERRUPT_HANDLER that is called when a processor interrupt occurs.
+
+ @param InterruptType Defines the type of interrupt or exception that
+ occurred on the processor.This parameter is processor architecture specific.
+ @param SystemContext A pointer to the processor context when
+ the interrupt occurred on the processor.
+
+ @return None
+
+**/
+typedef
+VOID
+(EFIAPI *EFI_CPU_INTERRUPT_HANDLER)(
+ IN CONST EFI_EXCEPTION_TYPE InterruptType,
+ IN CONST EFI_SYSTEM_CONTEXT SystemContext
+ );
+
+/**
+ This function flushes the range of addresses from Start to Start+Length
+ from the processor's data cache. If Start is not aligned to a cache line
+ boundary, then the bytes before Start to the preceding cache line boundary
+ are also flushed. If Start+Length is not aligned to a cache line boundary,
+ then the bytes past Start+Length to the end of the next cache line boundary
+ are also flushed. The FlushType of EfiCpuFlushTypeWriteBackInvalidate must be
+ supported. If the data cache is fully coherent with all DMA operations, then
+ this function can just return EFI_SUCCESS. If the processor does not support
+ flushing a range of the data cache, then the entire data cache can be flushed.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param Start The beginning physical address to flush from the processor's data
+ cache.
+ @param Length The number of bytes to flush from the processor's data cache. This
+ function may flush more bytes than Length specifies depending upon
+ the granularity of the flush operation that the processor supports.
+ @param FlushType Specifies the type of flush operation to perform.
+
+ @retval EFI_SUCCESS The address range from Start to Start+Length was flushed from
+ the processor's data cache.
+ @retval EFI_UNSUPPORTEDT The processor does not support the cache flush type specified
+ by FlushType.
+ @retval EFI_DEVICE_ERROR The address range from Start to Start+Length could not be flushed
+ from the processor's data cache.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_CPU_FLUSH_DATA_CACHE)(
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS Start,
+ IN UINT64 Length,
+ IN EFI_CPU_FLUSH_TYPE FlushType
+ );
+
+
+/**
+ This function enables interrupt processing by the processor.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Interrupts are enabled on the processor.
+ @retval EFI_DEVICE_ERROR Interrupts could not be enabled on the processor.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_CPU_ENABLE_INTERRUPT)(
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ );
+
+
+/**
+ This function disables interrupt processing by the processor.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS Interrupts are disabled on the processor.
+ @retval EFI_DEVICE_ERROR Interrupts could not be disabled on the processor.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_CPU_DISABLE_INTERRUPT)(
+ IN EFI_CPU_ARCH_PROTOCOL *This
+ );
+
+
+/**
+ This function retrieves the processor's current interrupt state a returns it in
+ State. If interrupts are currently enabled, then TRUE is returned. If interrupts
+ are currently disabled, then FALSE is returned.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param State A pointer to the processor's current interrupt state. Set to TRUE if
+ interrupts are enabled and FALSE if interrupts are disabled.
+
+ @retval EFI_SUCCESS The processor's current interrupt state was returned in State.
+ @retval EFI_INVALID_PARAMETER State is NULL.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_CPU_GET_INTERRUPT_STATE)(
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ OUT BOOLEAN *State
+ );
+
+
+/**
+ This function generates an INIT on the processor. If this function succeeds, then the
+ processor will be reset, and control will not be returned to the caller. If InitType is
+ not supported by this processor, or the processor cannot programmatically generate an
+ INIT without help from external hardware, then EFI_UNSUPPORTED is returned. If an error
+ occurs attempting to generate an INIT, then EFI_DEVICE_ERROR is returned.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param InitType The type of processor INIT to perform.
+
+ @retval EFI_SUCCESS The processor INIT was performed. This return code should never be seen.
+ @retval EFI_UNSUPPORTED The processor INIT operation specified by InitType is not supported
+ by this processor.
+ @retval EFI_DEVICE_ERROR The processor INIT failed.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_CPU_INIT)(
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_CPU_INIT_TYPE InitType
+ );
+
+
+/**
+ This function registers and enables the handler specified by InterruptHandler for a processor
+ interrupt or exception type specified by InterruptType. If InterruptHandler is NULL, then the
+ handler for the processor interrupt or exception type specified by InterruptType is uninstalled.
+ The installed handler is called once for each processor interrupt or exception.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param InterruptType A pointer to the processor's current interrupt state. Set to TRUE if interrupts
+ are enabled and FALSE if interrupts are disabled.
+ @param InterruptHandler A pointer to a function of type EFI_CPU_INTERRUPT_HANDLER that is called
+ when a processor interrupt occurs. If this parameter is NULL, then the handler
+ will be uninstalled.
+
+ @retval EFI_SUCCESS The handler for the processor interrupt was successfully installed or uninstalled.
+ @retval EFI_ALREADY_STARTED InterruptHandler is not NULL, and a handler for InterruptType was
+ previously installed.
+ @retval EFI_INVALID_PARAMETER InterruptHandler is NULL, and a handler for InterruptType was not
+ previously installed.
+ @retval EFI_UNSUPPORTED The interrupt specified by InterruptType is not supported.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_CPU_REGISTER_INTERRUPT_HANDLER)(
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_CPU_INTERRUPT_HANDLER InterruptHandler
+ );
+
+
+/**
+ This function reads the processor timer specified by TimerIndex and returns it in TimerValue.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param TimerIndex Specifies which processor timer is to be returned in TimerValue. This parameter
+ must be between 0 and NumberOfTimers-1.
+ @param TimerValue Pointer to the returned timer value.
+ @param TimerPeriod A pointer to the amount of time that passes in femtoseconds for each increment
+ of TimerValue. If TimerValue does not increment at a predictable rate, then 0 is
+ returned. This parameter is optional and may be NULL.
+
+ @retval EFI_SUCCESS The processor timer value specified by TimerIndex was returned in TimerValue.
+ @retval EFI_DEVICE_ERROR An error occurred attempting to read one of the processor's timers.
+ @retval EFI_INVALID_PARAMETER TimerValue is NULL or TimerIndex is not valid.
+ @retval EFI_UNSUPPORTED The processor does not have any readable timers.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_CPU_GET_TIMER_VALUE)(
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN UINT32 TimerIndex,
+ OUT UINT64 *TimerValue,
+ OUT UINT64 *TimerPeriod OPTIONAL
+ );
+
+
+/**
+ This function modifies the attributes for the memory region specified by BaseAddress and
+ Length from their current attributes to the attributes specified by Attributes.
+
+ @param This The EFI_CPU_ARCH_PROTOCOL instance.
+ @param BaseAddress The physical address that is the start address of a memory region.
+ @param Length The size in bytes of the memory region.
+ @param Attributes The bit mask of attributes to set for the memory region.
+
+ @retval EFI_SUCCESS The attributes were set for the memory region.
+ @retval EFI_ACCESS_DENIED The attributes for the memory resource range specified by
+ BaseAddress and Length cannot be modified.
+ @retval EFI_INVALID_PARAMETER Length is zero.
+ Attributes specified an illegal combination of attributes that
+ cannot be set together.
+ @retval EFI_OUT_OF_RESOURCES There are not enough system resources to modify the attributes of
+ the memory resource range.
+ @retval EFI_UNSUPPORTED The processor does not support one or more bytes of the memory
+ resource range specified by BaseAddress and Length.
+ The bit mask of attributes is not support for the memory resource
+ range specified by BaseAddress and Length.
+
+**/
+typedef
+EFI_STATUS
+(EFIAPI *EFI_CPU_SET_MEMORY_ATTRIBUTES)(
+ IN EFI_CPU_ARCH_PROTOCOL *This,
+ IN EFI_PHYSICAL_ADDRESS BaseAddress,
+ IN UINT64 Length,
+ IN UINT64 Attributes
+ );
+
+
+///
+/// The EFI_CPU_ARCH_PROTOCOL is used to abstract processor-specific functions from the DXE
+/// Foundation. This includes flushing caches, enabling and disabling interrupts, hooking interrupt
+/// vectors and exception vectors, reading internal processor timers, resetting the processor, and
+/// determining the processor frequency.
+///
+struct _EFI_CPU_ARCH_PROTOCOL {
+ EFI_CPU_FLUSH_DATA_CACHE FlushDataCache;
+ EFI_CPU_ENABLE_INTERRUPT EnableInterrupt;
+ EFI_CPU_DISABLE_INTERRUPT DisableInterrupt;
+ EFI_CPU_GET_INTERRUPT_STATE GetInterruptState;
+ EFI_CPU_INIT Init;
+ EFI_CPU_REGISTER_INTERRUPT_HANDLER RegisterInterruptHandler;
+ EFI_CPU_GET_TIMER_VALUE GetTimerValue;
+ EFI_CPU_SET_MEMORY_ATTRIBUTES SetMemoryAttributes;
+ ///
+ /// The number of timers that are available in a processor. The value in this
+ /// field is a constant that must not be modified after the CPU Architectural
+ /// Protocol is installed. All consumers must treat this as a read-only field.
+ ///
+ UINT32 NumberOfTimers;
+ ///
+ /// The size, in bytes, of the alignment required for DMA buffer allocations.
+ /// This is typically the size of the largest data cache line in the platform.
+ /// The value in this field is a constant that must not be modified after the
+ /// CPU Architectural Protocol is installed. All consumers must treat this as
+ /// a read-only field.
+ ///
+ UINT32 DmaBufferAlignment;
+};
+
+extern EFI_GUID gEfiCpuArchProtocolGuid;
+
+#endif