X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Froms%2Fipxe%2Fsrc%2Fdrivers%2Fnet%2Fforcedeth.h;fp=qemu%2Froms%2Fipxe%2Fsrc%2Fdrivers%2Fnet%2Fforcedeth.h;h=e1cf6f71af6a99b26ac6a4a507d09f4cd69fac99;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/qemu/roms/ipxe/src/drivers/net/forcedeth.h b/qemu/roms/ipxe/src/drivers/net/forcedeth.h
new file mode 100644
index 000000000..e1cf6f71a
--- /dev/null
+++ b/qemu/roms/ipxe/src/drivers/net/forcedeth.h
@@ -0,0 +1,602 @@
+/*
+ *    forcedeth.h -- Driver for NVIDIA nForce media access controllers for iPXE
+ *    Copyright (c) 2010 Andrei Faur <da3drus@gmail.com>
+ *
+ *    This program is free software; you can redistribute it and/or
+ *    modify it under the terms of the GNU General Public License as
+ *    published by the Free Software Foundation; either version 2 of the
+ *    License, or any later version.
+ *
+ *    This program is distributed in the hope that it will be useful, but
+ *    WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *    General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ *    02110-1301, USA.
+ *
+ * Portions of this code are taken from the Linux forcedeth driver that was
+ * based on a cleanroom reimplementation which was based on reverse engineered
+ * documentation written by Carl-Daniel Hailfinger and Andrew de Quincey:
+ * Copyright (C) 2003,4,5 Manfred Spraul
+ * Copyright (C) 2004 Andrew de Quincey (wol support)
+ * Copyright (C) 2004 Carl-Daniel Hailfinger (invalid MAC handling, insane
+ *		IRQ rate fixes, bigendian fixes, cleanups, verification)
+ * Copyright (c) 2004,2005,2006,2007,2008,2009 NVIDIA Corporation
+ *
+ * This header is a direct copy of #define lines and structs found in the
+ * above mentioned driver, modified where necessary to make them work for iPXE.
+ *
+ */
+
+FILE_LICENCE ( GPL2_OR_LATER );
+
+#ifndef _FORCEDETH_H_
+#define _FORCEDETH_H_
+
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+
+struct ring_desc {
+	u32 buf;
+	u32 flaglen;
+};
+
+struct ring_desc_ex {
+	u32 bufhigh;
+	u32 buflow;
+	u32 txvlan;
+	u32 flaglen;
+};
+
+#define DESC_VER_1	1
+#define DESC_VER_2	2
+#define DESC_VER_3	3
+
+#define RX_RING_SIZE		16
+#define TX_RING_SIZE		32
+#define RXTX_RING_SIZE		( ( RX_RING_SIZE ) + ( TX_RING_SIZE ) )
+#define RX_RING_MIN		128
+#define TX_RING_MIN		64
+#define RING_MAX_DESC_VER_1	1024
+#define RING_MAX_DESC_VER_2_3	16384
+
+#define NV_RX_ALLOC_PAD	(64)
+
+#define NV_RX_HEADERS	(64)
+
+#define RX_BUF_SZ		( ( ETH_FRAME_LEN ) + ( NV_RX_HEADERS ) )
+
+#define NV_PKTLIMIT_1	1500
+#define NV_PKTLIMIT_2	9100
+
+#define NV_LINK_POLL_FREQUENCY	128
+
+/* PHY defines */
+#define PHY_OUI_MARVELL		0x5043
+#define PHY_OUI_CICADA		0x03f1
+#define PHY_OUI_VITESSE		0x01c1
+#define PHY_OUI_REALTEK		0x0732
+#define PHY_OUI_REALTEK2	0x0020
+#define PHYID1_OUI_MASK	0x03ff
+#define PHYID1_OUI_SHFT	6
+#define PHYID2_OUI_MASK	0xfc00
+#define PHYID2_OUI_SHFT	10
+#define PHYID2_MODEL_MASK		0x03f0
+#define PHY_MODEL_REALTEK_8211		0x0110
+#define PHY_REV_MASK			0x0001
+#define PHY_REV_REALTEK_8211B		0x0000
+#define PHY_REV_REALTEK_8211C		0x0001
+#define PHY_MODEL_REALTEK_8201		0x0200
+#define PHY_MODEL_MARVELL_E3016		0x0220
+#define PHY_MARVELL_E3016_INITMASK	0x0300
+#define PHY_CICADA_INIT1	0x0f000
+#define PHY_CICADA_INIT2	0x0e00
+#define PHY_CICADA_INIT3	0x01000
+#define PHY_CICADA_INIT4	0x0200
+#define PHY_CICADA_INIT5	0x0004
+#define PHY_CICADA_INIT6	0x02000
+#define PHY_VITESSE_INIT_REG1	0x1f
+#define PHY_VITESSE_INIT_REG2	0x10
+#define PHY_VITESSE_INIT_REG3	0x11
+#define PHY_VITESSE_INIT_REG4	0x12
+#define PHY_VITESSE_INIT_MSK1	0xc
+#define PHY_VITESSE_INIT_MSK2	0x0180
+#define PHY_VITESSE_INIT1	0x52b5
+#define PHY_VITESSE_INIT2	0xaf8a
+#define PHY_VITESSE_INIT3	0x8
+#define PHY_VITESSE_INIT4	0x8f8a
+#define PHY_VITESSE_INIT5	0xaf86
+#define PHY_VITESSE_INIT6	0x8f86
+#define PHY_VITESSE_INIT7	0xaf82
+#define PHY_VITESSE_INIT8	0x0100
+#define PHY_VITESSE_INIT9	0x8f82
+#define PHY_VITESSE_INIT10	0x0
+#define PHY_REALTEK_INIT_REG1	0x1f
+#define PHY_REALTEK_INIT_REG2	0x19
+#define PHY_REALTEK_INIT_REG3	0x13
+#define PHY_REALTEK_INIT_REG4	0x14
+#define PHY_REALTEK_INIT_REG5	0x18
+#define PHY_REALTEK_INIT_REG6	0x11
+#define PHY_REALTEK_INIT_REG7	0x01
+#define PHY_REALTEK_INIT1	0x0000
+#define PHY_REALTEK_INIT2	0x8e00
+#define PHY_REALTEK_INIT3	0x0001
+#define PHY_REALTEK_INIT4	0xad17
+#define PHY_REALTEK_INIT5	0xfb54
+#define PHY_REALTEK_INIT6	0xf5c7
+#define PHY_REALTEK_INIT7	0x1000
+#define PHY_REALTEK_INIT8	0x0003
+#define PHY_REALTEK_INIT9	0x0008
+#define PHY_REALTEK_INIT10	0x0005
+#define PHY_REALTEK_INIT11	0x0200
+#define PHY_REALTEK_INIT_MSK1	0x0003
+
+#define PHY_GIGABIT	0x0100
+
+#define PHY_TIMEOUT	0x1
+#define PHY_ERROR	0x2
+
+#define PHY_100	0x1
+#define PHY_1000	0x2
+#define PHY_HALF	0x100
+
+
+#define NV_PAUSEFRAME_RX_CAPABLE	0x0001
+#define NV_PAUSEFRAME_TX_CAPABLE	0x0002
+#define NV_PAUSEFRAME_RX_ENABLE		0x0004
+#define NV_PAUSEFRAME_TX_ENABLE		0x0008
+#define NV_PAUSEFRAME_RX_REQ		0x0010
+#define NV_PAUSEFRAME_TX_REQ		0x0020
+#define NV_PAUSEFRAME_AUTONEG		0x0040
+
+/* MSI/MSI-X defines */
+#define NV_MSI_X_MAX_VECTORS  8
+#define NV_MSI_X_VECTORS_MASK 0x000f
+#define NV_MSI_CAPABLE        0x0010
+#define NV_MSI_X_CAPABLE      0x0020
+#define NV_MSI_ENABLED        0x0040
+#define NV_MSI_X_ENABLED      0x0080
+
+#define NV_MSI_X_VECTOR_ALL   0x0
+#define NV_MSI_X_VECTOR_RX    0x0
+#define NV_MSI_X_VECTOR_TX    0x1
+#define NV_MSI_X_VECTOR_OTHER 0x2
+
+#define NV_MSI_PRIV_OFFSET 0x68
+#define NV_MSI_PRIV_VALUE  0xffffffff
+
+
+#define NV_MIIBUSY_DELAY	50
+#define NV_MIIPHY_DELAY		10
+#define NV_MIIPHY_DELAYMAX	10000
+
+/* Hardware access */
+#define DEV_NEED_TIMERIRQ          0x0000001  /* set the timer irq flag in the irq mask */
+#define DEV_NEED_LINKTIMER         0x0000002  /* poll link settings. Relies on the timer irq */
+#define DEV_HAS_LARGEDESC          0x0000004  /* device supports jumbo frames and needs packet format 2 */
+#define DEV_HAS_HIGH_DMA           0x0000008  /* device supports 64bit dma */
+#define DEV_HAS_CHECKSUM           0x0000010  /* device supports tx and rx checksum offloads */
+#define DEV_HAS_VLAN               0x0000020  /* device supports vlan tagging and striping */
+#define DEV_HAS_MSI                0x0000040  /* device supports MSI */
+#define DEV_HAS_MSI_X              0x0000080  /* device supports MSI-X */
+#define DEV_HAS_POWER_CNTRL        0x0000100  /* device supports power savings */
+#define DEV_HAS_STATISTICS_V1      0x0000200  /* device supports hw statistics version 1 */
+#define DEV_HAS_STATISTICS_V2      0x0000600  /* device supports hw statistics version 2 */
+#define DEV_HAS_STATISTICS_V3      0x0000e00  /* device supports hw statistics version 3 */
+#define DEV_HAS_TEST_EXTENDED      0x0001000  /* device supports extended diagnostic test */
+#define DEV_HAS_MGMT_UNIT          0x0002000  /* device supports management unit */
+#define DEV_HAS_CORRECT_MACADDR    0x0004000  /* device supports correct mac address order */
+#define DEV_HAS_COLLISION_FIX      0x0008000  /* device supports tx collision fix */
+#define DEV_HAS_PAUSEFRAME_TX_V1   0x0010000  /* device supports tx pause frames version 1 */
+#define DEV_HAS_PAUSEFRAME_TX_V2   0x0020000  /* device supports tx pause frames version 2 */
+#define DEV_HAS_PAUSEFRAME_TX_V3   0x0040000  /* device supports tx pause frames version 3 */
+#define DEV_NEED_TX_LIMIT          0x0080000  /* device needs to limit tx */
+#define DEV_NEED_TX_LIMIT2         0x0180000  /* device needs to limit tx, expect for some revs */
+#define DEV_HAS_GEAR_MODE          0x0200000  /* device supports gear mode */
+#define DEV_NEED_PHY_INIT_FIX      0x0400000  /* device needs specific phy workaround */
+#define DEV_NEED_LOW_POWER_FIX     0x0800000  /* device needs special power up workaround */
+#define DEV_NEED_MSI_FIX           0x1000000  /* device needs msi workaround */
+
+#define FLAG_MASK_V1 0xffff0000
+#define FLAG_MASK_V2 0xffffc000
+#define LEN_MASK_V1 (0xffffffff ^ FLAG_MASK_V1)
+#define LEN_MASK_V2 (0xffffffff ^ FLAG_MASK_V2)
+
+#define NV_TX_LASTPACKET	(1<<16)
+#define NV_TX_RETRYERROR	(1<<19)
+#define NV_TX_RETRYCOUNT_MASK	(0xF<<20)
+#define NV_TX_FORCED_INTERRUPT	(1<<24)
+#define NV_TX_DEFERRED		(1<<26)
+#define NV_TX_CARRIERLOST	(1<<27)
+#define NV_TX_LATECOLLISION	(1<<28)
+#define NV_TX_UNDERFLOW		(1<<29)
+#define NV_TX_ERROR		(1<<30)
+#define NV_TX_VALID		(1<<31)
+
+#define NV_TX2_LASTPACKET	(1<<29)
+#define NV_TX2_RETRYERROR	(1<<18)
+#define NV_TX2_RETRYCOUNT_MASK	(0xF<<19)
+#define NV_TX2_FORCED_INTERRUPT	(1<<30)
+#define NV_TX2_DEFERRED		(1<<25)
+#define NV_TX2_CARRIERLOST	(1<<26)
+#define NV_TX2_LATECOLLISION	(1<<27)
+#define NV_TX2_UNDERFLOW	(1<<28)
+/* error and valid are the same for both */
+#define NV_TX2_ERROR		(1<<30)
+#define NV_TX2_VALID		(1<<31)
+#define NV_TX2_TSO		(1<<28)
+#define NV_TX2_TSO_SHIFT	14
+#define NV_TX2_TSO_MAX_SHIFT	14
+#define NV_TX2_TSO_MAX_SIZE	(1<<NV_TX2_TSO_MAX_SHIFT)
+#define NV_TX2_CHECKSUM_L3	(1<<27)
+#define NV_TX2_CHECKSUM_L4	(1<<26)
+
+#define NV_TX3_VLAN_TAG_PRESENT (1<<18)
+
+#define NV_RX_DESCRIPTORVALID	(1<<16)
+#define NV_RX_MISSEDFRAME	(1<<17)
+#define NV_RX_SUBSTRACT1	(1<<18)
+#define NV_RX_ERROR1		(1<<23)
+#define NV_RX_ERROR2		(1<<24)
+#define NV_RX_ERROR3		(1<<25)
+#define NV_RX_ERROR4		(1<<26)
+#define NV_RX_CRCERR		(1<<27)
+#define NV_RX_OVERFLOW		(1<<28)
+#define NV_RX_FRAMINGERR	(1<<29)
+#define NV_RX_ERROR		(1<<30)
+#define NV_RX_AVAIL		(1<<31)
+#define NV_RX_ERROR_MASK	(NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3|NV_RX_ERROR4|NV_RX_CRCERR|NV_RX_OVERFLOW|NV_RX_FRAMINGERR)
+
+#define NV_RX2_CHECKSUMMASK	(0x1C000000)
+#define NV_RX2_CHECKSUM_IP	(0x10000000)
+#define NV_RX2_CHECKSUM_IP_TCP	(0x14000000)
+#define NV_RX2_CHECKSUM_IP_UDP	(0x18000000)
+#define NV_RX2_DESCRIPTORVALID	(1<<29)
+#define NV_RX2_SUBSTRACT1	(1<<25)
+#define NV_RX2_ERROR1		(1<<18)
+#define NV_RX2_ERROR2		(1<<19)
+#define NV_RX2_ERROR3		(1<<20)
+#define NV_RX2_ERROR4		(1<<21)
+#define NV_RX2_CRCERR		(1<<22)
+#define NV_RX2_OVERFLOW		(1<<23)
+#define NV_RX2_FRAMINGERR	(1<<24)
+/* error and avail are the same for both */
+#define NV_RX2_ERROR		(1<<30)
+#define NV_RX2_AVAIL		(1<<31)
+#define NV_RX2_ERROR_MASK	(NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3|NV_RX2_ERROR4|NV_RX2_CRCERR|NV_RX2_OVERFLOW|NV_RX2_FRAMINGERR)
+
+#define NV_RX3_VLAN_TAG_PRESENT (1<<16)
+#define NV_RX3_VLAN_TAG_MASK	(0x0000FFFF)
+
+/* Miscellaneous hardware related defines */
+#define NV_PCI_REGSZ_VER1	0x270
+#define NV_PCI_REGSZ_VER2	0x2d4
+#define NV_PCI_REGSZ_VER3	0x604
+#define NV_PCI_REGSZ_MAX	0x604
+
+/* various timeout delays: all in usec */
+#define NV_TXRX_RESET_DELAY	4
+#define NV_TXSTOP_DELAY1	10
+#define NV_TXSTOP_DELAY1MAX	500000
+#define NV_TXSTOP_DELAY2	100
+#define NV_RXSTOP_DELAY1	10
+#define NV_RXSTOP_DELAY1MAX	500000
+#define NV_RXSTOP_DELAY2	100
+#define NV_SETUP5_DELAY		5
+#define NV_SETUP5_DELAYMAX	50000
+#define NV_POWERUP_DELAY	5
+#define NV_POWERUP_DELAYMAX	5000
+#define NV_MIIBUSY_DELAY	50
+#define NV_MIIPHY_DELAY	10
+#define NV_MIIPHY_DELAYMAX	10000
+#define NV_MAC_RESET_DELAY	64
+
+#define NV_MSI_X_CAPABLE	0x0020
+
+#define MII_READ	(-1)
+
+struct forcedeth_private {
+	struct pci_device *pci_dev;
+	struct net_device *netdev;
+
+	void *mmio_addr;
+
+	u32 linkspeed;
+	int duplex;
+
+	int phyaddr;
+	unsigned int phy_oui;
+	unsigned int phy_rev;
+	unsigned int phy_model;
+
+	u16 gigabit;
+	u32 mac_in_use;
+	int mgmt_version;
+	int mgmt_sema;
+
+	/* rx specific fields */
+	struct ring_desc *rx_ring;
+	struct io_buffer *rx_iobuf[RX_RING_SIZE];
+	int rx_curr;
+
+	/* tx specific fields */
+	struct ring_desc *tx_ring;
+	struct io_buffer *tx_iobuf[TX_RING_SIZE];
+	int tx_fill_ctr;
+	int tx_curr;
+	int tx_tail;
+
+	/* flow control */
+	u32 pause_flags;
+
+	unsigned long driver_data;
+};
+
+enum {
+	NvRegIrqStatus = 0x000,
+#define NVREG_IRQSTAT_MIIEVENT	0x040
+#define NVREG_IRQSTAT_MASK		0x83ff
+	NvRegIrqMask = 0x004,
+#define NVREG_IRQ_RX_ERROR		0x0001
+#define NVREG_IRQ_RX			0x0002
+#define NVREG_IRQ_RX_NOBUF		0x0004
+#define NVREG_IRQ_TX_ERR		0x0008
+#define NVREG_IRQ_TX_OK			0x0010
+#define NVREG_IRQ_TIMER			0x0020
+#define NVREG_IRQ_LINK			0x0040
+#define NVREG_IRQ_RX_FORCED		0x0080
+#define NVREG_IRQ_TX_FORCED		0x0100
+#define NVREG_IRQ_RECOVER_ERROR		0x8200
+#define NVREG_IRQMASK_THROUGHPUT	0x00df
+#define NVREG_IRQMASK_CPU		0x0060
+#define NVREG_IRQ_TX_ALL		(NVREG_IRQ_TX_ERR|NVREG_IRQ_TX_OK|NVREG_IRQ_TX_FORCED)
+#define NVREG_IRQ_RX_ALL		(NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_RX_FORCED)
+#define NVREG_IRQ_OTHER			(NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_RECOVER_ERROR)
+
+	NvRegUnknownSetupReg6 = 0x008,
+#define NVREG_UNKSETUP6_VAL		3
+
+/*
+ * NVREG_POLL_DEFAULT is the interval length of the timer source on the nic
+ * NVREG_POLL_DEFAULT=97 would result in an interval length of 1 ms
+ */
+	NvRegPollingInterval = 0x00c,
+#define NVREG_POLL_DEFAULT_THROUGHPUT	65535 /* backup tx cleanup if loop max reached */
+#define NVREG_POLL_DEFAULT_CPU	13
+	NvRegMSIMap0 = 0x020,
+	NvRegMSIMap1 = 0x024,
+	NvRegMSIIrqMask = 0x030,
+#define NVREG_MSI_VECTOR_0_ENABLED 0x01
+	NvRegMisc1 = 0x080,
+#define NVREG_MISC1_PAUSE_TX	0x01
+#define NVREG_MISC1_HD		0x02
+#define NVREG_MISC1_FORCE	0x3b0f3c
+
+	NvRegMacReset = 0x34,
+#define NVREG_MAC_RESET_ASSERT	0x0F3
+	NvRegTransmitterControl = 0x084,
+#define NVREG_XMITCTL_START	0x01
+#define NVREG_XMITCTL_MGMT_ST	0x40000000
+#define NVREG_XMITCTL_SYNC_MASK		0x000f0000
+#define NVREG_XMITCTL_SYNC_NOT_READY	0x0
+#define NVREG_XMITCTL_SYNC_PHY_INIT	0x00040000
+#define NVREG_XMITCTL_MGMT_SEMA_MASK	0x00000f00
+#define NVREG_XMITCTL_MGMT_SEMA_FREE	0x0
+#define NVREG_XMITCTL_HOST_SEMA_MASK	0x0000f000
+#define NVREG_XMITCTL_HOST_SEMA_ACQ	0x0000f000
+#define NVREG_XMITCTL_HOST_LOADED	0x00004000
+#define NVREG_XMITCTL_TX_PATH_EN	0x01000000
+#define NVREG_XMITCTL_DATA_START	0x00100000
+#define NVREG_XMITCTL_DATA_READY	0x00010000
+#define NVREG_XMITCTL_DATA_ERROR	0x00020000
+	NvRegTransmitterStatus = 0x088,
+#define NVREG_XMITSTAT_BUSY	0x01
+
+	NvRegPacketFilterFlags = 0x8c,
+#define NVREG_PFF_PAUSE_RX	0x08
+#define NVREG_PFF_ALWAYS	0x7F0000
+#define NVREG_PFF_PROMISC	0x80
+#define NVREG_PFF_MYADDR	0x20
+#define NVREG_PFF_LOOPBACK	0x10
+
+	NvRegOffloadConfig = 0x90,
+#define NVREG_OFFLOAD_HOMEPHY	0x601
+#define NVREG_OFFLOAD_NORMAL	RX_NIC_BUFSIZE
+	NvRegReceiverControl = 0x094,
+#define NVREG_RCVCTL_START	0x01
+#define NVREG_RCVCTL_RX_PATH_EN	0x01000000
+	NvRegReceiverStatus = 0x98,
+#define NVREG_RCVSTAT_BUSY	0x01
+
+	NvRegSlotTime = 0x9c,
+#define NVREG_SLOTTIME_LEGBF_ENABLED	0x80000000
+#define NVREG_SLOTTIME_10_100_FULL	0x00007f00
+#define NVREG_SLOTTIME_1000_FULL 	0x0003ff00
+#define NVREG_SLOTTIME_HALF		0x0000ff00
+#define NVREG_SLOTTIME_DEFAULT	 	0x00007f00
+#define NVREG_SLOTTIME_MASK		0x000000ff
+
+	NvRegTxDeferral = 0xA0,
+#define NVREG_TX_DEFERRAL_DEFAULT		0x15050f
+#define NVREG_TX_DEFERRAL_RGMII_10_100		0x16070f
+#define NVREG_TX_DEFERRAL_RGMII_1000		0x14050f
+#define NVREG_TX_DEFERRAL_RGMII_STRETCH_10	0x16190f
+#define NVREG_TX_DEFERRAL_RGMII_STRETCH_100	0x16300f
+#define NVREG_TX_DEFERRAL_MII_STRETCH		0x152000
+	NvRegRxDeferral = 0xA4,
+#define NVREG_RX_DEFERRAL_DEFAULT	0x16
+	NvRegMacAddrA = 0xA8,
+	NvRegMacAddrB = 0xAC,
+	NvRegMulticastAddrA = 0xB0,
+#define NVREG_MCASTADDRA_FORCE	0x01
+	NvRegMulticastAddrB = 0xB4,
+	NvRegMulticastMaskA = 0xB8,
+#define NVREG_MCASTMASKA_NONE		0xffffffff
+	NvRegMulticastMaskB = 0xBC,
+#define NVREG_MCASTMASKB_NONE		0xffff
+
+	NvRegPhyInterface = 0xC0,
+#define PHY_RGMII		0x10000000
+	NvRegBackOffControl = 0xC4,
+#define NVREG_BKOFFCTRL_DEFAULT			0x70000000
+#define NVREG_BKOFFCTRL_SEED_MASK		0x000003ff
+#define NVREG_BKOFFCTRL_SELECT			24
+#define NVREG_BKOFFCTRL_GEAR			12
+
+	NvRegTxRingPhysAddr = 0x100,
+	NvRegRxRingPhysAddr = 0x104,
+	NvRegRingSizes = 0x108,
+#define NVREG_RINGSZ_TXSHIFT 0
+#define NVREG_RINGSZ_RXSHIFT 16
+	NvRegTransmitPoll = 0x10c,
+#define NVREG_TRANSMITPOLL_MAC_ADDR_REV	0x00008000
+	NvRegLinkSpeed = 0x110,
+#define NVREG_LINKSPEED_FORCE 0x10000
+#define NVREG_LINKSPEED_10	1000
+#define NVREG_LINKSPEED_100	100
+#define NVREG_LINKSPEED_1000	50
+#define NVREG_LINKSPEED_MASK	(0xFFF)
+	NvRegUnknownSetupReg5 = 0x130,
+#define NVREG_UNKSETUP5_BIT31	(1<<31)
+	NvRegTxWatermark = 0x13c,
+#define NVREG_TX_WM_DESC1_DEFAULT	0x0200010
+#define NVREG_TX_WM_DESC2_3_DEFAULT	0x1e08000
+#define NVREG_TX_WM_DESC2_3_1000	0xfe08000
+	NvRegTxRxControl = 0x144,
+#define NVREG_TXRXCTL_KICK	0x0001
+#define NVREG_TXRXCTL_BIT1	0x0002
+#define NVREG_TXRXCTL_BIT2	0x0004
+#define NVREG_TXRXCTL_IDLE	0x0008
+#define NVREG_TXRXCTL_RESET	0x0010
+#define NVREG_TXRXCTL_RXCHECK	0x0400
+#define NVREG_TXRXCTL_DESC_1	0
+#define NVREG_TXRXCTL_DESC_2	0x002100
+#define NVREG_TXRXCTL_DESC_3	0xc02200
+#define NVREG_TXRXCTL_VLANSTRIP 0x00040
+#define NVREG_TXRXCTL_VLANINS	0x00080
+	NvRegTxRingPhysAddrHigh = 0x148,
+	NvRegRxRingPhysAddrHigh = 0x14C,
+	NvRegTxPauseFrame = 0x170,
+#define NVREG_TX_PAUSEFRAME_DISABLE	0x0fff0080
+#define NVREG_TX_PAUSEFRAME_ENABLE_V1	0x01800010
+#define NVREG_TX_PAUSEFRAME_ENABLE_V2	0x056003f0
+#define NVREG_TX_PAUSEFRAME_ENABLE_V3	0x09f00880
+	NvRegTxPauseFrameLimit = 0x174,
+#define NVREG_TX_PAUSEFRAMELIMIT_ENABLE	0x00010000
+	NvRegMIIStatus = 0x180,
+#define NVREG_MIISTAT_ERROR		0x0001
+#define NVREG_MIISTAT_LINKCHANGE	0x0008
+#define NVREG_MIISTAT_MASK_RW		0x0007
+#define NVREG_MIISTAT_MASK_ALL		0x000f
+	NvRegMIIMask = 0x184,
+#define NVREG_MII_LINKCHANGE		0x0008
+
+	NvRegAdapterControl = 0x188,
+#define NVREG_ADAPTCTL_START	0x02
+#define NVREG_ADAPTCTL_LINKUP	0x04
+#define NVREG_ADAPTCTL_PHYVALID	0x40000
+#define NVREG_ADAPTCTL_RUNNING	0x100000
+#define NVREG_ADAPTCTL_PHYSHIFT	24
+	NvRegMIISpeed = 0x18c,
+#define NVREG_MIISPEED_BIT8	(1<<8)
+#define NVREG_MIIDELAY	5
+	NvRegMIIControl = 0x190,
+#define NVREG_MIICTL_INUSE	0x08000
+#define NVREG_MIICTL_WRITE	0x00400
+#define NVREG_MIICTL_ADDRSHIFT	5
+	NvRegMIIData = 0x194,
+	NvRegTxUnicast = 0x1a0,
+	NvRegTxMulticast = 0x1a4,
+	NvRegTxBroadcast = 0x1a8,
+	NvRegWakeUpFlags = 0x200,
+#define NVREG_WAKEUPFLAGS_VAL		0x7770
+#define NVREG_WAKEUPFLAGS_BUSYSHIFT	24
+#define NVREG_WAKEUPFLAGS_ENABLESHIFT	16
+#define NVREG_WAKEUPFLAGS_D3SHIFT	12
+#define NVREG_WAKEUPFLAGS_D2SHIFT	8
+#define NVREG_WAKEUPFLAGS_D1SHIFT	4
+#define NVREG_WAKEUPFLAGS_D0SHIFT	0
+#define NVREG_WAKEUPFLAGS_ACCEPT_MAGPAT		0x01
+#define NVREG_WAKEUPFLAGS_ACCEPT_WAKEUPPAT	0x02
+#define NVREG_WAKEUPFLAGS_ACCEPT_LINKCHANGE	0x04
+#define NVREG_WAKEUPFLAGS_ENABLE	0x1111
+
+	NvRegMgmtUnitGetVersion = 0x204,
+#define NVREG_MGMTUNITGETVERSION     	0x01
+	NvRegMgmtUnitVersion = 0x208,
+#define NVREG_MGMTUNITVERSION		0x08
+	NvRegPowerCap = 0x268,
+#define NVREG_POWERCAP_D3SUPP	(1<<30)
+#define NVREG_POWERCAP_D2SUPP	(1<<26)
+#define NVREG_POWERCAP_D1SUPP	(1<<25)
+	NvRegPowerState = 0x26c,
+#define NVREG_POWERSTATE_POWEREDUP	0x8000
+#define NVREG_POWERSTATE_VALID		0x0100
+#define NVREG_POWERSTATE_MASK		0x0003
+#define NVREG_POWERSTATE_D0		0x0000
+#define NVREG_POWERSTATE_D1		0x0001
+#define NVREG_POWERSTATE_D2		0x0002
+#define NVREG_POWERSTATE_D3		0x0003
+	NvRegMgmtUnitControl = 0x278,
+#define NVREG_MGMTUNITCONTROL_INUSE	0x20000
+	NvRegTxCnt = 0x280,
+	NvRegTxZeroReXmt = 0x284,
+	NvRegTxOneReXmt = 0x288,
+	NvRegTxManyReXmt = 0x28c,
+	NvRegTxLateCol = 0x290,
+	NvRegTxUnderflow = 0x294,
+	NvRegTxLossCarrier = 0x298,
+	NvRegTxExcessDef = 0x29c,
+	NvRegTxRetryErr = 0x2a0,
+	NvRegRxFrameErr = 0x2a4,
+	NvRegRxExtraByte = 0x2a8,
+	NvRegRxLateCol = 0x2ac,
+	NvRegRxRunt = 0x2b0,
+	NvRegRxFrameTooLong = 0x2b4,
+	NvRegRxOverflow = 0x2b8,
+	NvRegRxFCSErr = 0x2bc,
+	NvRegRxFrameAlignErr = 0x2c0,
+	NvRegRxLenErr = 0x2c4,
+	NvRegRxUnicast = 0x2c8,
+	NvRegRxMulticast = 0x2cc,
+	NvRegRxBroadcast = 0x2d0,
+	NvRegTxDef = 0x2d4,
+	NvRegTxFrame = 0x2d8,
+	NvRegRxCnt = 0x2dc,
+	NvRegTxPause = 0x2e0,
+	NvRegRxPause = 0x2e4,
+	NvRegRxDropFrame = 0x2e8,
+	NvRegVlanControl = 0x300,
+#define NVREG_VLANCONTROL_ENABLE	0x2000
+	NvRegMSIXMap0 = 0x3e0,
+	NvRegMSIXMap1 = 0x3e4,
+	NvRegMSIXIrqStatus = 0x3f0,
+
+	NvRegPowerState2 = 0x600,
+#define NVREG_POWERSTATE2_POWERUP_MASK		0x0F15
+#define NVREG_POWERSTATE2_POWERUP_REV_A3	0x0001
+#define NVREG_POWERSTATE2_PHY_RESET		0x0004
+#define NVREG_POWERSTATE2_GATE_CLOCKS		0x0F00
+};
+
+enum {
+	NV_OPTIMIZATION_MODE_THROUGHPUT,
+	NV_OPTIMIZATION_MODE_CPU,
+	NV_OPTIMIZATION_MODE_DYNAMIC
+};
+
+enum {
+	NV_CROSSOVER_DETECTION_DISABLED,
+	NV_CROSSOVER_DETECTION_ENABLED
+};
+
+
+#define NV_SETUP_RX_RING	0x01
+#define NV_SETUP_TX_RING	0x02
+
+#define NV_RESTART_TX		0x1
+#define NV_RESTART_RX		0x2
+
+#endif /* _FORCEDETH_H_ */