X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Fhw%2Fblock%2Fpflash_cfi01.c;fp=qemu%2Fhw%2Fblock%2Fpflash_cfi01.c;h=2ba6c772932db39cdff46f42f3ec5d33f5ea9790;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/hw/block/pflash_cfi01.c b/qemu/hw/block/pflash_cfi01.c new file mode 100644 index 000000000..2ba6c7729 --- /dev/null +++ b/qemu/hw/block/pflash_cfi01.c @@ -0,0 +1,954 @@ +/* + * CFI parallel flash with Intel command set emulation + * + * Copyright (c) 2006 Thorsten Zitterell + * Copyright (c) 2005 Jocelyn Mayer + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see . + */ + +/* + * For now, this code can emulate flashes of 1, 2 or 4 bytes width. + * Supported commands/modes are: + * - flash read + * - flash write + * - flash ID read + * - sector erase + * - CFI queries + * + * It does not support timings + * It does not support flash interleaving + * It does not implement software data protection as found in many real chips + * It does not implement erase suspend/resume commands + * It does not implement multiple sectors erase + * + * It does not implement much more ... + */ + +#include "hw/hw.h" +#include "hw/block/flash.h" +#include "sysemu/block-backend.h" +#include "qemu/timer.h" +#include "qemu/bitops.h" +#include "exec/address-spaces.h" +#include "qemu/host-utils.h" +#include "hw/sysbus.h" + +#define PFLASH_BUG(fmt, ...) \ +do { \ + fprintf(stderr, "PFLASH: Possible BUG - " fmt, ## __VA_ARGS__); \ + exit(1); \ +} while(0) + +/* #define PFLASH_DEBUG */ +#ifdef PFLASH_DEBUG +#define DPRINTF(fmt, ...) \ +do { \ + fprintf(stderr, "PFLASH: " fmt , ## __VA_ARGS__); \ +} while (0) +#else +#define DPRINTF(fmt, ...) do { } while (0) +#endif + +#define TYPE_CFI_PFLASH01 "cfi.pflash01" +#define CFI_PFLASH01(obj) OBJECT_CHECK(pflash_t, (obj), TYPE_CFI_PFLASH01) + +#define PFLASH_BE 0 +#define PFLASH_SECURE 1 + +struct pflash_t { + /*< private >*/ + SysBusDevice parent_obj; + /*< public >*/ + + BlockBackend *blk; + uint32_t nb_blocs; + uint64_t sector_len; + uint8_t bank_width; + uint8_t device_width; /* If 0, device width not specified. */ + uint8_t max_device_width; /* max device width in bytes */ + uint32_t features; + uint8_t wcycle; /* if 0, the flash is read normally */ + int ro; + uint8_t cmd; + uint8_t status; + uint16_t ident0; + uint16_t ident1; + uint16_t ident2; + uint16_t ident3; + uint8_t cfi_len; + uint8_t cfi_table[0x52]; + uint64_t counter; + unsigned int writeblock_size; + QEMUTimer *timer; + MemoryRegion mem; + char *name; + void *storage; +}; + +static int pflash_post_load(void *opaque, int version_id); + +static const VMStateDescription vmstate_pflash = { + .name = "pflash_cfi01", + .version_id = 1, + .minimum_version_id = 1, + .post_load = pflash_post_load, + .fields = (VMStateField[]) { + VMSTATE_UINT8(wcycle, pflash_t), + VMSTATE_UINT8(cmd, pflash_t), + VMSTATE_UINT8(status, pflash_t), + VMSTATE_UINT64(counter, pflash_t), + VMSTATE_END_OF_LIST() + } +}; + +static void pflash_timer (void *opaque) +{ + pflash_t *pfl = opaque; + + DPRINTF("%s: command %02x done\n", __func__, pfl->cmd); + /* Reset flash */ + pfl->status ^= 0x80; + memory_region_rom_device_set_romd(&pfl->mem, true); + pfl->wcycle = 0; + pfl->cmd = 0; +} + +/* Perform a CFI query based on the bank width of the flash. + * If this code is called we know we have a device_width set for + * this flash. + */ +static uint32_t pflash_cfi_query(pflash_t *pfl, hwaddr offset) +{ + int i; + uint32_t resp = 0; + hwaddr boff; + + /* Adjust incoming offset to match expected device-width + * addressing. CFI query addresses are always specified in terms of + * the maximum supported width of the device. This means that x8 + * devices and x8/x16 devices in x8 mode behave differently. For + * devices that are not used at their max width, we will be + * provided with addresses that use higher address bits than + * expected (based on the max width), so we will shift them lower + * so that they will match the addresses used when + * device_width==max_device_width. + */ + boff = offset >> (ctz32(pfl->bank_width) + + ctz32(pfl->max_device_width) - ctz32(pfl->device_width)); + + if (boff > pfl->cfi_len) { + return 0; + } + /* Now we will construct the CFI response generated by a single + * device, then replicate that for all devices that make up the + * bus. For wide parts used in x8 mode, CFI query responses + * are different than native byte-wide parts. + */ + resp = pfl->cfi_table[boff]; + if (pfl->device_width != pfl->max_device_width) { + /* The only case currently supported is x8 mode for a + * wider part. + */ + if (pfl->device_width != 1 || pfl->bank_width > 4) { + DPRINTF("%s: Unsupported device configuration: " + "device_width=%d, max_device_width=%d\n", + __func__, pfl->device_width, + pfl->max_device_width); + return 0; + } + /* CFI query data is repeated, rather than zero padded for + * wide devices used in x8 mode. + */ + for (i = 1; i < pfl->max_device_width; i++) { + resp = deposit32(resp, 8 * i, 8, pfl->cfi_table[boff]); + } + } + /* Replicate responses for each device in bank. */ + if (pfl->device_width < pfl->bank_width) { + for (i = pfl->device_width; + i < pfl->bank_width; i += pfl->device_width) { + resp = deposit32(resp, 8 * i, 8 * pfl->device_width, resp); + } + } + + return resp; +} + + + +/* Perform a device id query based on the bank width of the flash. */ +static uint32_t pflash_devid_query(pflash_t *pfl, hwaddr offset) +{ + int i; + uint32_t resp; + hwaddr boff; + + /* Adjust incoming offset to match expected device-width + * addressing. Device ID read addresses are always specified in + * terms of the maximum supported width of the device. This means + * that x8 devices and x8/x16 devices in x8 mode behave + * differently. For devices that are not used at their max width, + * we will be provided with addresses that use higher address bits + * than expected (based on the max width), so we will shift them + * lower so that they will match the addresses used when + * device_width==max_device_width. + */ + boff = offset >> (ctz32(pfl->bank_width) + + ctz32(pfl->max_device_width) - ctz32(pfl->device_width)); + + /* Mask off upper bits which may be used in to query block + * or sector lock status at other addresses. + * Offsets 2/3 are block lock status, is not emulated. + */ + switch (boff & 0xFF) { + case 0: + resp = pfl->ident0; + DPRINTF("%s: Manufacturer Code %04x\n", __func__, resp); + break; + case 1: + resp = pfl->ident1; + DPRINTF("%s: Device ID Code %04x\n", __func__, resp); + break; + default: + DPRINTF("%s: Read Device Information offset=%x\n", __func__, + (unsigned)offset); + return 0; + break; + } + /* Replicate responses for each device in bank. */ + if (pfl->device_width < pfl->bank_width) { + for (i = pfl->device_width; + i < pfl->bank_width; i += pfl->device_width) { + resp = deposit32(resp, 8 * i, 8 * pfl->device_width, resp); + } + } + + return resp; +} + +static uint32_t pflash_data_read(pflash_t *pfl, hwaddr offset, + int width, int be) +{ + uint8_t *p; + uint32_t ret; + + p = pfl->storage; + switch (width) { + case 1: + ret = p[offset]; + DPRINTF("%s: data offset " TARGET_FMT_plx " %02x\n", + __func__, offset, ret); + break; + case 2: + if (be) { + ret = p[offset] << 8; + ret |= p[offset + 1]; + } else { + ret = p[offset]; + ret |= p[offset + 1] << 8; + } + DPRINTF("%s: data offset " TARGET_FMT_plx " %04x\n", + __func__, offset, ret); + break; + case 4: + if (be) { + ret = p[offset] << 24; + ret |= p[offset + 1] << 16; + ret |= p[offset + 2] << 8; + ret |= p[offset + 3]; + } else { + ret = p[offset]; + ret |= p[offset + 1] << 8; + ret |= p[offset + 2] << 16; + ret |= p[offset + 3] << 24; + } + DPRINTF("%s: data offset " TARGET_FMT_plx " %08x\n", + __func__, offset, ret); + break; + default: + DPRINTF("BUG in %s\n", __func__); + abort(); + } + return ret; +} + +static uint32_t pflash_read (pflash_t *pfl, hwaddr offset, + int width, int be) +{ + hwaddr boff; + uint32_t ret; + + ret = -1; + +#if 0 + DPRINTF("%s: reading offset " TARGET_FMT_plx " under cmd %02x width %d\n", + __func__, offset, pfl->cmd, width); +#endif + switch (pfl->cmd) { + default: + /* This should never happen : reset state & treat it as a read */ + DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd); + pfl->wcycle = 0; + pfl->cmd = 0; + /* fall through to read code */ + case 0x00: + /* Flash area read */ + ret = pflash_data_read(pfl, offset, width, be); + break; + case 0x10: /* Single byte program */ + case 0x20: /* Block erase */ + case 0x28: /* Block erase */ + case 0x40: /* single byte program */ + case 0x50: /* Clear status register */ + case 0x60: /* Block /un)lock */ + case 0x70: /* Status Register */ + case 0xe8: /* Write block */ + /* Status register read. Return status from each device in + * bank. + */ + ret = pfl->status; + if (pfl->device_width && width > pfl->device_width) { + int shift = pfl->device_width * 8; + while (shift + pfl->device_width * 8 <= width * 8) { + ret |= pfl->status << shift; + shift += pfl->device_width * 8; + } + } else if (!pfl->device_width && width > 2) { + /* Handle 32 bit flash cases where device width is not + * set. (Existing behavior before device width added.) + */ + ret |= pfl->status << 16; + } + DPRINTF("%s: status %x\n", __func__, ret); + break; + case 0x90: + if (!pfl->device_width) { + /* Preserve old behavior if device width not specified */ + boff = offset & 0xFF; + if (pfl->bank_width == 2) { + boff = boff >> 1; + } else if (pfl->bank_width == 4) { + boff = boff >> 2; + } + + switch (boff) { + case 0: + ret = pfl->ident0 << 8 | pfl->ident1; + DPRINTF("%s: Manufacturer Code %04x\n", __func__, ret); + break; + case 1: + ret = pfl->ident2 << 8 | pfl->ident3; + DPRINTF("%s: Device ID Code %04x\n", __func__, ret); + break; + default: + DPRINTF("%s: Read Device Information boff=%x\n", __func__, + (unsigned)boff); + ret = 0; + break; + } + } else { + /* If we have a read larger than the bank_width, combine multiple + * manufacturer/device ID queries into a single response. + */ + int i; + for (i = 0; i < width; i += pfl->bank_width) { + ret = deposit32(ret, i * 8, pfl->bank_width * 8, + pflash_devid_query(pfl, + offset + i * pfl->bank_width)); + } + } + break; + case 0x98: /* Query mode */ + if (!pfl->device_width) { + /* Preserve old behavior if device width not specified */ + boff = offset & 0xFF; + if (pfl->bank_width == 2) { + boff = boff >> 1; + } else if (pfl->bank_width == 4) { + boff = boff >> 2; + } + + if (boff > pfl->cfi_len) { + ret = 0; + } else { + ret = pfl->cfi_table[boff]; + } + } else { + /* If we have a read larger than the bank_width, combine multiple + * CFI queries into a single response. + */ + int i; + for (i = 0; i < width; i += pfl->bank_width) { + ret = deposit32(ret, i * 8, pfl->bank_width * 8, + pflash_cfi_query(pfl, + offset + i * pfl->bank_width)); + } + } + + break; + } + return ret; +} + +/* update flash content on disk */ +static void pflash_update(pflash_t *pfl, int offset, + int size) +{ + int offset_end; + if (pfl->blk) { + offset_end = offset + size; + /* round to sectors */ + offset = offset >> 9; + offset_end = (offset_end + 511) >> 9; + blk_write(pfl->blk, offset, pfl->storage + (offset << 9), + offset_end - offset); + } +} + +static inline void pflash_data_write(pflash_t *pfl, hwaddr offset, + uint32_t value, int width, int be) +{ + uint8_t *p = pfl->storage; + + DPRINTF("%s: block write offset " TARGET_FMT_plx + " value %x counter %016" PRIx64 "\n", + __func__, offset, value, pfl->counter); + switch (width) { + case 1: + p[offset] = value; + break; + case 2: + if (be) { + p[offset] = value >> 8; + p[offset + 1] = value; + } else { + p[offset] = value; + p[offset + 1] = value >> 8; + } + break; + case 4: + if (be) { + p[offset] = value >> 24; + p[offset + 1] = value >> 16; + p[offset + 2] = value >> 8; + p[offset + 3] = value; + } else { + p[offset] = value; + p[offset + 1] = value >> 8; + p[offset + 2] = value >> 16; + p[offset + 3] = value >> 24; + } + break; + } + +} + +static void pflash_write(pflash_t *pfl, hwaddr offset, + uint32_t value, int width, int be) +{ + uint8_t *p; + uint8_t cmd; + + cmd = value; + + DPRINTF("%s: writing offset " TARGET_FMT_plx " value %08x width %d wcycle 0x%x\n", + __func__, offset, value, width, pfl->wcycle); + + if (!pfl->wcycle) { + /* Set the device in I/O access mode */ + memory_region_rom_device_set_romd(&pfl->mem, false); + } + + switch (pfl->wcycle) { + case 0: + /* read mode */ + switch (cmd) { + case 0x00: /* ??? */ + goto reset_flash; + case 0x10: /* Single Byte Program */ + case 0x40: /* Single Byte Program */ + DPRINTF("%s: Single Byte Program\n", __func__); + break; + case 0x20: /* Block erase */ + p = pfl->storage; + offset &= ~(pfl->sector_len - 1); + + DPRINTF("%s: block erase at " TARGET_FMT_plx " bytes %x\n", + __func__, offset, (unsigned)pfl->sector_len); + + if (!pfl->ro) { + memset(p + offset, 0xff, pfl->sector_len); + pflash_update(pfl, offset, pfl->sector_len); + } else { + pfl->status |= 0x20; /* Block erase error */ + } + pfl->status |= 0x80; /* Ready! */ + break; + case 0x50: /* Clear status bits */ + DPRINTF("%s: Clear status bits\n", __func__); + pfl->status = 0x0; + goto reset_flash; + case 0x60: /* Block (un)lock */ + DPRINTF("%s: Block unlock\n", __func__); + break; + case 0x70: /* Status Register */ + DPRINTF("%s: Read status register\n", __func__); + pfl->cmd = cmd; + return; + case 0x90: /* Read Device ID */ + DPRINTF("%s: Read Device information\n", __func__); + pfl->cmd = cmd; + return; + case 0x98: /* CFI query */ + DPRINTF("%s: CFI query\n", __func__); + break; + case 0xe8: /* Write to buffer */ + DPRINTF("%s: Write to buffer\n", __func__); + pfl->status |= 0x80; /* Ready! */ + break; + case 0xf0: /* Probe for AMD flash */ + DPRINTF("%s: Probe for AMD flash\n", __func__); + goto reset_flash; + case 0xff: /* Read array mode */ + DPRINTF("%s: Read array mode\n", __func__); + goto reset_flash; + default: + goto error_flash; + } + pfl->wcycle++; + pfl->cmd = cmd; + break; + case 1: + switch (pfl->cmd) { + case 0x10: /* Single Byte Program */ + case 0x40: /* Single Byte Program */ + DPRINTF("%s: Single Byte Program\n", __func__); + if (!pfl->ro) { + pflash_data_write(pfl, offset, value, width, be); + pflash_update(pfl, offset, width); + } else { + pfl->status |= 0x10; /* Programming error */ + } + pfl->status |= 0x80; /* Ready! */ + pfl->wcycle = 0; + break; + case 0x20: /* Block erase */ + case 0x28: + if (cmd == 0xd0) { /* confirm */ + pfl->wcycle = 0; + pfl->status |= 0x80; + } else if (cmd == 0xff) { /* read array mode */ + goto reset_flash; + } else + goto error_flash; + + break; + case 0xe8: + /* Mask writeblock size based on device width, or bank width if + * device width not specified. + */ + if (pfl->device_width) { + value = extract32(value, 0, pfl->device_width * 8); + } else { + value = extract32(value, 0, pfl->bank_width * 8); + } + DPRINTF("%s: block write of %x bytes\n", __func__, value); + pfl->counter = value; + pfl->wcycle++; + break; + case 0x60: + if (cmd == 0xd0) { + pfl->wcycle = 0; + pfl->status |= 0x80; + } else if (cmd == 0x01) { + pfl->wcycle = 0; + pfl->status |= 0x80; + } else if (cmd == 0xff) { + goto reset_flash; + } else { + DPRINTF("%s: Unknown (un)locking command\n", __func__); + goto reset_flash; + } + break; + case 0x98: + if (cmd == 0xff) { + goto reset_flash; + } else { + DPRINTF("%s: leaving query mode\n", __func__); + } + break; + default: + goto error_flash; + } + break; + case 2: + switch (pfl->cmd) { + case 0xe8: /* Block write */ + if (!pfl->ro) { + pflash_data_write(pfl, offset, value, width, be); + } else { + pfl->status |= 0x10; /* Programming error */ + } + + pfl->status |= 0x80; + + if (!pfl->counter) { + hwaddr mask = pfl->writeblock_size - 1; + mask = ~mask; + + DPRINTF("%s: block write finished\n", __func__); + pfl->wcycle++; + if (!pfl->ro) { + /* Flush the entire write buffer onto backing storage. */ + pflash_update(pfl, offset & mask, pfl->writeblock_size); + } else { + pfl->status |= 0x10; /* Programming error */ + } + } + + pfl->counter--; + break; + default: + goto error_flash; + } + break; + case 3: /* Confirm mode */ + switch (pfl->cmd) { + case 0xe8: /* Block write */ + if (cmd == 0xd0) { + pfl->wcycle = 0; + pfl->status |= 0x80; + } else { + DPRINTF("%s: unknown command for \"write block\"\n", __func__); + PFLASH_BUG("Write block confirm"); + goto reset_flash; + } + break; + default: + goto error_flash; + } + break; + default: + /* Should never happen */ + DPRINTF("%s: invalid write state\n", __func__); + goto reset_flash; + } + return; + + error_flash: + qemu_log_mask(LOG_UNIMP, "%s: Unimplemented flash cmd sequence " + "(offset " TARGET_FMT_plx ", wcycle 0x%x cmd 0x%x value 0x%x)" + "\n", __func__, offset, pfl->wcycle, pfl->cmd, value); + + reset_flash: + memory_region_rom_device_set_romd(&pfl->mem, true); + + pfl->wcycle = 0; + pfl->cmd = 0; +} + + +static MemTxResult pflash_mem_read_with_attrs(void *opaque, hwaddr addr, uint64_t *value, + unsigned len, MemTxAttrs attrs) +{ + pflash_t *pfl = opaque; + bool be = !!(pfl->features & (1 << PFLASH_BE)); + + if ((pfl->features & (1 << PFLASH_SECURE)) && !attrs.secure) { + *value = pflash_data_read(opaque, addr, len, be); + } else { + *value = pflash_read(opaque, addr, len, be); + } + return MEMTX_OK; +} + +static MemTxResult pflash_mem_write_with_attrs(void *opaque, hwaddr addr, uint64_t value, + unsigned len, MemTxAttrs attrs) +{ + pflash_t *pfl = opaque; + bool be = !!(pfl->features & (1 << PFLASH_BE)); + + if ((pfl->features & (1 << PFLASH_SECURE)) && !attrs.secure) { + return MEMTX_ERROR; + } else { + pflash_write(opaque, addr, value, len, be); + return MEMTX_OK; + } +} + +static const MemoryRegionOps pflash_cfi01_ops = { + .read_with_attrs = pflash_mem_read_with_attrs, + .write_with_attrs = pflash_mem_write_with_attrs, + .endianness = DEVICE_NATIVE_ENDIAN, +}; + +static void pflash_cfi01_realize(DeviceState *dev, Error **errp) +{ + pflash_t *pfl = CFI_PFLASH01(dev); + uint64_t total_len; + int ret; + uint64_t blocks_per_device, device_len; + int num_devices; + Error *local_err = NULL; + + total_len = pfl->sector_len * pfl->nb_blocs; + + /* These are only used to expose the parameters of each device + * in the cfi_table[]. + */ + num_devices = pfl->device_width ? (pfl->bank_width / pfl->device_width) : 1; + blocks_per_device = pfl->nb_blocs / num_devices; + device_len = pfl->sector_len * blocks_per_device; + + /* XXX: to be fixed */ +#if 0 + if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) && + total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024)) + return NULL; +#endif + + memory_region_init_rom_device( + &pfl->mem, OBJECT(dev), + &pflash_cfi01_ops, + pfl, + pfl->name, total_len, &local_err); + if (local_err) { + error_propagate(errp, local_err); + return; + } + + vmstate_register_ram(&pfl->mem, DEVICE(pfl)); + pfl->storage = memory_region_get_ram_ptr(&pfl->mem); + sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->mem); + + if (pfl->blk) { + /* read the initial flash content */ + ret = blk_read(pfl->blk, 0, pfl->storage, total_len >> 9); + + if (ret < 0) { + vmstate_unregister_ram(&pfl->mem, DEVICE(pfl)); + error_setg(errp, "failed to read the initial flash content"); + return; + } + } + + if (pfl->blk) { + pfl->ro = blk_is_read_only(pfl->blk); + } else { + pfl->ro = 0; + } + + /* Default to devices being used at their maximum device width. This was + * assumed before the device_width support was added. + */ + if (!pfl->max_device_width) { + pfl->max_device_width = pfl->device_width; + } + + pfl->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, pflash_timer, pfl); + pfl->wcycle = 0; + pfl->cmd = 0; + pfl->status = 0; + /* Hardcoded CFI table */ + pfl->cfi_len = 0x52; + /* Standard "QRY" string */ + pfl->cfi_table[0x10] = 'Q'; + pfl->cfi_table[0x11] = 'R'; + pfl->cfi_table[0x12] = 'Y'; + /* Command set (Intel) */ + pfl->cfi_table[0x13] = 0x01; + pfl->cfi_table[0x14] = 0x00; + /* Primary extended table address (none) */ + pfl->cfi_table[0x15] = 0x31; + pfl->cfi_table[0x16] = 0x00; + /* Alternate command set (none) */ + pfl->cfi_table[0x17] = 0x00; + pfl->cfi_table[0x18] = 0x00; + /* Alternate extended table (none) */ + pfl->cfi_table[0x19] = 0x00; + pfl->cfi_table[0x1A] = 0x00; + /* Vcc min */ + pfl->cfi_table[0x1B] = 0x45; + /* Vcc max */ + pfl->cfi_table[0x1C] = 0x55; + /* Vpp min (no Vpp pin) */ + pfl->cfi_table[0x1D] = 0x00; + /* Vpp max (no Vpp pin) */ + pfl->cfi_table[0x1E] = 0x00; + /* Reserved */ + pfl->cfi_table[0x1F] = 0x07; + /* Timeout for min size buffer write */ + pfl->cfi_table[0x20] = 0x07; + /* Typical timeout for block erase */ + pfl->cfi_table[0x21] = 0x0a; + /* Typical timeout for full chip erase (4096 ms) */ + pfl->cfi_table[0x22] = 0x00; + /* Reserved */ + pfl->cfi_table[0x23] = 0x04; + /* Max timeout for buffer write */ + pfl->cfi_table[0x24] = 0x04; + /* Max timeout for block erase */ + pfl->cfi_table[0x25] = 0x04; + /* Max timeout for chip erase */ + pfl->cfi_table[0x26] = 0x00; + /* Device size */ + pfl->cfi_table[0x27] = ctz32(device_len); /* + 1; */ + /* Flash device interface (8 & 16 bits) */ + pfl->cfi_table[0x28] = 0x02; + pfl->cfi_table[0x29] = 0x00; + /* Max number of bytes in multi-bytes write */ + if (pfl->bank_width == 1) { + pfl->cfi_table[0x2A] = 0x08; + } else { + pfl->cfi_table[0x2A] = 0x0B; + } + pfl->writeblock_size = 1 << pfl->cfi_table[0x2A]; + + pfl->cfi_table[0x2B] = 0x00; + /* Number of erase block regions (uniform) */ + pfl->cfi_table[0x2C] = 0x01; + /* Erase block region 1 */ + pfl->cfi_table[0x2D] = blocks_per_device - 1; + pfl->cfi_table[0x2E] = (blocks_per_device - 1) >> 8; + pfl->cfi_table[0x2F] = pfl->sector_len >> 8; + pfl->cfi_table[0x30] = pfl->sector_len >> 16; + + /* Extended */ + pfl->cfi_table[0x31] = 'P'; + pfl->cfi_table[0x32] = 'R'; + pfl->cfi_table[0x33] = 'I'; + + pfl->cfi_table[0x34] = '1'; + pfl->cfi_table[0x35] = '0'; + + pfl->cfi_table[0x36] = 0x00; + pfl->cfi_table[0x37] = 0x00; + pfl->cfi_table[0x38] = 0x00; + pfl->cfi_table[0x39] = 0x00; + + pfl->cfi_table[0x3a] = 0x00; + + pfl->cfi_table[0x3b] = 0x00; + pfl->cfi_table[0x3c] = 0x00; + + pfl->cfi_table[0x3f] = 0x01; /* Number of protection fields */ +} + +static Property pflash_cfi01_properties[] = { + DEFINE_PROP_DRIVE("drive", struct pflash_t, blk), + /* num-blocks is the number of blocks actually visible to the guest, + * ie the total size of the device divided by the sector length. + * If we're emulating flash devices wired in parallel the actual + * number of blocks per indvidual device will differ. + */ + DEFINE_PROP_UINT32("num-blocks", struct pflash_t, nb_blocs, 0), + DEFINE_PROP_UINT64("sector-length", struct pflash_t, sector_len, 0), + /* width here is the overall width of this QEMU device in bytes. + * The QEMU device may be emulating a number of flash devices + * wired up in parallel; the width of each individual flash + * device should be specified via device-width. If the individual + * devices have a maximum width which is greater than the width + * they are being used for, this maximum width should be set via + * max-device-width (which otherwise defaults to device-width). + * So for instance a 32-bit wide QEMU flash device made from four + * 16-bit flash devices used in 8-bit wide mode would be configured + * with width = 4, device-width = 1, max-device-width = 2. + * + * If device-width is not specified we default to backwards + * compatible behaviour which is a bad emulation of two + * 16 bit devices making up a 32 bit wide QEMU device. This + * is deprecated for new uses of this device. + */ + DEFINE_PROP_UINT8("width", struct pflash_t, bank_width, 0), + DEFINE_PROP_UINT8("device-width", struct pflash_t, device_width, 0), + DEFINE_PROP_UINT8("max-device-width", struct pflash_t, max_device_width, 0), + DEFINE_PROP_BIT("big-endian", struct pflash_t, features, PFLASH_BE, 0), + DEFINE_PROP_BIT("secure", struct pflash_t, features, PFLASH_SECURE, 0), + DEFINE_PROP_UINT16("id0", struct pflash_t, ident0, 0), + DEFINE_PROP_UINT16("id1", struct pflash_t, ident1, 0), + DEFINE_PROP_UINT16("id2", struct pflash_t, ident2, 0), + DEFINE_PROP_UINT16("id3", struct pflash_t, ident3, 0), + DEFINE_PROP_STRING("name", struct pflash_t, name), + DEFINE_PROP_END_OF_LIST(), +}; + +static void pflash_cfi01_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->realize = pflash_cfi01_realize; + dc->props = pflash_cfi01_properties; + dc->vmsd = &vmstate_pflash; + set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); +} + + +static const TypeInfo pflash_cfi01_info = { + .name = TYPE_CFI_PFLASH01, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(struct pflash_t), + .class_init = pflash_cfi01_class_init, +}; + +static void pflash_cfi01_register_types(void) +{ + type_register_static(&pflash_cfi01_info); +} + +type_init(pflash_cfi01_register_types) + +pflash_t *pflash_cfi01_register(hwaddr base, + DeviceState *qdev, const char *name, + hwaddr size, + BlockBackend *blk, + uint32_t sector_len, int nb_blocs, + int bank_width, uint16_t id0, uint16_t id1, + uint16_t id2, uint16_t id3, int be) +{ + DeviceState *dev = qdev_create(NULL, TYPE_CFI_PFLASH01); + + if (blk) { + qdev_prop_set_drive(dev, "drive", blk, &error_abort); + } + qdev_prop_set_uint32(dev, "num-blocks", nb_blocs); + qdev_prop_set_uint64(dev, "sector-length", sector_len); + qdev_prop_set_uint8(dev, "width", bank_width); + qdev_prop_set_bit(dev, "big-endian", !!be); + qdev_prop_set_uint16(dev, "id0", id0); + qdev_prop_set_uint16(dev, "id1", id1); + qdev_prop_set_uint16(dev, "id2", id2); + qdev_prop_set_uint16(dev, "id3", id3); + qdev_prop_set_string(dev, "name", name); + qdev_init_nofail(dev); + + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base); + return CFI_PFLASH01(dev); +} + +MemoryRegion *pflash_cfi01_get_memory(pflash_t *fl) +{ + return &fl->mem; +} + +static int pflash_post_load(void *opaque, int version_id) +{ + pflash_t *pfl = opaque; + + if (!pfl->ro) { + DPRINTF("%s: updating bdrv for %s\n", __func__, pfl->name); + pflash_update(pfl, 0, pfl->sector_len * pfl->nb_blocs); + } + return 0; +}