X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=qemu%2Fdocs%2Fqdev-device-use.txt;fp=qemu%2Fdocs%2Fqdev-device-use.txt;h=136d2711203f4385a381b9dcb81ea6b61ef02dee;hb=e44e3482bdb4d0ebde2d8b41830ac2cdb07948fb;hp=0000000000000000000000000000000000000000;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git diff --git a/qemu/docs/qdev-device-use.txt b/qemu/docs/qdev-device-use.txt new file mode 100644 index 000000000..136d27112 --- /dev/null +++ b/qemu/docs/qdev-device-use.txt @@ -0,0 +1,416 @@ += How to convert to -device & friends = + +=== Specifying Bus and Address on Bus === + +In qdev, each device has a parent bus. Some devices provide one or +more buses for children. You can specify a device's parent bus with +-device parameter bus. + +A device typically has a device address on its parent bus. For buses +where this address can be configured, devices provide a bus-specific +property. Examples: + + bus property name value format + PCI addr %x.%x (dev.fn, .fn optional) + I2C address %u + SCSI scsi-id %u + IDE unit %u + HDA cad %u + virtio-serial-bus nr %u + ccid-bus slot %u + USB port %d(.%d)* (port.port...) + +Example: device i440FX-pcihost is on the root bus, and provides a PCI +bus named pci.0. To put a FOO device into its slot 4, use -device +FOO,bus=/i440FX-pcihost/pci.0,addr=4. The abbreviated form bus=pci.0 +also works as long as the bus name is unique. + +=== Block Devices === + +A QEMU block device (drive) has a host and a guest part. + +In the general case, the guest device is connected to a controller +device. For instance, the IDE controller provides two IDE buses, each +of which can have up to two ide-drive devices, and each ide-drive +device is a guest part, and is connected to a host part. + +Except we sometimes lump controller, bus(es) and drive device(s) all +together into a single device. For instance, the ISA floppy +controller is connected to up to two host drives. + +The old ways to define block devices define host and guest part +together. Sometimes, they can even define a controller device in +addition to the block device. + +The new way keeps the parts separate: you create the host part with +-drive, and guest device(s) with -device. + +The various old ways to define drives all boil down to the common form + + -drive if=TYPE,bus=BUS,unit=UNIT,OPTS... + +TYPE, BUS and UNIT identify the controller device, which of its buses +to use, and the drive's address on that bus. Details depend on TYPE. + +Instead of bus=BUS,unit=UNIT, you can also say index=IDX. + +In the new way, this becomes something like + + -drive if=none,id=DRIVE-ID,HOST-OPTS... + -device DEVNAME,drive=DRIVE-ID,DEV-OPTS... + +The old OPTS get split into HOST-OPTS and DEV-OPTS as follows: + +* file, format, snapshot, cache, aio, readonly, rerror, werror go into + HOST-OPTS. + +* cyls, head, secs and trans go into HOST-OPTS. Future work: they + should go into DEV-OPTS instead. + +* serial goes into DEV-OPTS, for devices supporting serial numbers. + For other devices, it goes nowhere. + +* media is special. In the old way, it selects disk vs. CD-ROM with + if=ide, if=scsi and if=xen. The new way uses DEVNAME for that. + Additionally, readonly=on goes into HOST-OPTS. + +* addr is special, see if=virtio below. + +The -device argument differs in detail for each type of drive: + +* if=ide + + -device DEVNAME,drive=DRIVE-ID,bus=IDE-BUS,unit=UNIT + + where DEVNAME is either ide-hd or ide-cd, IDE-BUS identifies an IDE + bus, normally either ide.0 or ide.1, and UNIT is either 0 or 1. + +* if=scsi + + The old way implicitly creates SCSI controllers as needed. The new + way makes that explicit: + + -device lsi53c895a,id=ID + + As for all PCI devices, you can add bus=PCI-BUS,addr=DEVFN to + control the PCI device address. + + This SCSI controller provides a single SCSI bus, named ID.0. Put a + disk on it: + + -device DEVNAME,drive=DRIVE-ID,bus=ID.0,scsi-id=UNIT + + where DEVNAME is either scsi-hd, scsi-cd or scsi-generic. + +* if=floppy + + -global isa-fdc.driveA=DRIVE-ID + -global isa-fdc.driveB=DRIVE-ID + + This is -global instead of -device, because the floppy controller is + created automatically, and we want to configure that one, not create + a second one (which isn't possible anyway). + + Without any -global isa-fdc,... you get an empty driveA and no + driveB. You can use -nodefaults to suppress the default driveA, see + "Default Devices". + +* if=virtio + + -device virtio-blk-pci,drive=DRIVE-ID,class=C,vectors=V,ioeventfd=IOEVENTFD + + This lets you control PCI device class and MSI-X vectors. + + IOEVENTFD controls whether or not ioeventfd is used for virtqueue + notify. It can be set to on (default) or off. + + As for all PCI devices, you can add bus=PCI-BUS,addr=DEVFN to + control the PCI device address. This replaces option addr available + with -drive if=virtio. + +* if=pflash, if=mtd, if=sd, if=xen are not yet available with -device + +For USB devices, the old way is actually different: + + -usbdevice disk:format=FMT:FILENAME + +Provides much less control than -drive's OPTS... The new way fixes +that: + + -device usb-storage,drive=DRIVE-ID,removable=RMB + +The removable parameter gives control over the SCSI INQUIRY removable +(RMB) bit. USB thumbdrives usually set removable=on, while USB hard +disks set removable=off. + +Bug: usb-storage pretends to be a block device, but it's really a SCSI +controller that can serve only a single device, which it creates +automatically. The automatic creation guesses what kind of guest part +to create from the host part, like -drive if=scsi. Host and guest +part are not cleanly separated. + +=== Character Devices === + +A QEMU character device has a host and a guest part. + +The old ways to define character devices define host and guest part +together. + +The new way keeps the parts separate: you create the host part with +-chardev, and the guest device with -device. + +The various old ways to define a character device are all of the +general form + + -FOO FOO-OPTS...,LEGACY-CHARDEV + +where FOO-OPTS... is specific to -FOO, and the host part +LEGACY-CHARDEV is the same everywhere. + +In the new way, this becomes + + -chardev HOST-OPTS...,id=CHR-ID + -device DEVNAME,chardev=CHR-ID,DEV-OPTS... + +The appropriate DEVNAME depends on the machine type. For type "pc": + +* -serial becomes -device isa-serial,iobase=IOADDR,irq=IRQ,index=IDX + + This lets you control I/O ports and IRQs. + +* -parallel becomes -device isa-parallel,iobase=IOADDR,irq=IRQ,index=IDX + + This lets you control I/O ports and IRQs. + +* -usbdevice serial:vendorid=VID,productid=PRID becomes + -device usb-serial,vendorid=VID,productid=PRID + +* -usbdevice braille doesn't support LEGACY-CHARDEV syntax. It always + uses "braille". With -device, this useful default is gone, so you + have to use something like + + -device usb-braille,chardev=braille,vendorid=VID,productid=PRID + -chardev braille,id=braille + +* -virtioconsole becomes + -device virtio-serial-pci,class=C,vectors=V,ioeventfd=IOEVENTFD,max_ports=N + -device virtconsole,is_console=NUM,nr=NR,name=NAME + +LEGACY-CHARDEV translates to -chardev HOST-OPTS... as follows: + +* null becomes -chardev null + +* pty, msmouse, braille, stdio likewise + +* vc:WIDTHxHEIGHT becomes -chardev vc,width=WIDTH,height=HEIGHT + +* vc:CxC becomes -chardev vc,cols=,rows= + +* con: becomes -chardev console + +* COM becomes -chardev serial,path=COM + +* file:FNAME becomes -chardev file,path=FNAME + +* pipe:FNAME becomes -chardev pipe,path=FNAME + +* tcp:HOST:PORT,OPTS... becomes -chardev socket,host=HOST,port=PORT,OPTS... + +* telnet:HOST:PORT,OPTS... becomes + -chardev socket,host=HOST,port=PORT,OPTS...,telnet=on + +* udp:HOST:PORT@LOCALADDR:LOCALPORT becomes + -chardev udp,host=HOST,port=PORT,localaddr=LOCALADDR,localport=LOCALPORT + +* unix:FNAME becomes -chardev socket,path=FNAME + +* /dev/parportN becomes -chardev parport,file=/dev/parportN + +* /dev/ppiN likewise + +* Any other /dev/FNAME becomes -chardev tty,path=/dev/FNAME + +* mon:LEGACY-CHARDEV is special: it multiplexes the monitor onto the + character device defined by LEGACY-CHARDEV. -chardev provides more + general multiplexing instead: you can connect up to four users to a + single host part. You need to pass mux=on to -chardev to enable + switching the input focus. + +QEMU uses LEGACY-CHARDEV syntax not just to set up guest devices, but +also in various other places such as -monitor or -net +user,guestfwd=... You can use chardev:CHR-ID in place of +LEGACY-CHARDEV to refer to a host part defined with -chardev. + +=== Network Devices === + +Host and guest part of network devices have always been separate. + +The old way to define the guest part looks like this: + + -net nic,netdev=NET-ID,macaddr=MACADDR,model=MODEL,name=ID,addr=STR,vectors=V + +Except for USB it looks like this: + + -usbdevice net:netdev=NET-ID,macaddr=MACADDR,name=ID + +The new way is -device: + + -device DEVNAME,netdev=NET-ID,mac=MACADDR,DEV-OPTS... + +DEVNAME equals MODEL, except for virtio you have to name the virtio +device appropriate for the bus (virtio-net-pci for PCI), and for USB +you have to use usb-net. + +The old name=ID parameter becomes the usual id=ID with -device. + +For PCI devices, you can add bus=PCI-BUS,addr=DEVFN to control the PCI +device address, as usual. The old -net nic provides parameter addr +for that, which is silently ignored when the NIC is not a PCI device. + +For virtio-net-pci, you can control whether or not ioeventfd is used for +virtqueue notify by setting ioeventfd= to on or off (default). + +-net nic accepts vectors=V for all models, but it's silently ignored +except for virtio-net-pci (model=virtio). With -device, only devices +that support it accept it. + +Not all devices are available with -device at this time. All PCI +devices and ne2k_isa are. + +Some PCI devices aren't available with -net nic, e.g. i82558a. + +To connect to a VLAN instead of an ordinary host part, replace +netdev=NET-ID by vlan=VLAN. + +=== Graphics Devices === + +Host and guest part of graphics devices have always been separate. + +The old way to define the guest graphics device is -vga VGA. Not all +machines support all -vga options. + +The new way is -device. The mapping from -vga argument to -device +depends on the machine type. For machine "pc", it's: + + std -device VGA + cirrus -device cirrus-vga + vmware -device vmware-svga + qxl -device qxl-vga + none -nodefaults + disables more than just VGA, see "Default Devices" + +As for all PCI devices, you can add bus=PCI-BUS,addr=DEVFN to control +the PCI device address. + +-device VGA supports properties bios-offset and bios-size, but they +aren't used with machine type "pc". + +For machine "isapc", it's + + std -device isa-vga + cirrus not yet available with -device + none -nodefaults + disables more than just VGA, see "Default Devices" + +Bug: the new way doesn't work for machine types "pc" and "isapc", +because it violates obscure device initialization ordering +constraints. + +=== Audio Devices === + +Host and guest part of audio devices have always been separate. + +The old way to define guest audio devices is -soundhw C1,... + +The new way is to define each guest audio device separately with +-device. + +Map from -soundhw sound card name to -device: + + ac97 -device AC97 + cs4231a -device cs4231a,iobase=IOADDR,irq=IRQ,dma=DMA + es1370 -device ES1370 + gus -device gus,iobase=IOADDR,irq=IRQ,dma=DMA,freq=F + hda -device intel-hda,msi=MSI -device hda-duplex + sb16 -device sb16,iobase=IOADDR,irq=IRQ,dma=DMA,dma16=DMA16,version=V + adlib not yet available with -device + pcspk not yet available with -device + +For PCI devices, you can add bus=PCI-BUS,addr=DEVFN to control the PCI +device address, as usual. + +=== USB Devices === + +The old way to define a virtual USB device is -usbdevice DRIVER:OPTS... + +The new way is -device DEVNAME,DEV-OPTS... Details depend on DRIVER: + +* ccid -device usb-ccid +* keyboard -device usb-kbd +* mouse -device usb-mouse +* tablet -device usb-tablet +* wacom-tablet -device usb-wacom-tablet +* host:... See "Host Device Assignment" +* disk:... See "Block Devices" +* serial:... See "Character Devices" +* braille See "Character Devices" +* net:... See "Network Devices" +* bt:... not yet available with -device + +=== Watchdog Devices === + +Host and guest part of watchdog devices have always been separate. + +The old way to define a guest watchdog device is -watchdog DEVNAME. +The new way is -device DEVNAME. For PCI devices, you can add +bus=PCI-BUS,addr=DEVFN to control the PCI device address, as usual. + +=== Host Device Assignment === + +QEMU supports assigning host PCI devices (qemu-kvm only at this time) +and host USB devices. + +The old way to assign a host PCI device is + + -pcidevice host=ADDR,dma=none,id=ID + +The new way is + + -device pci-assign,host=ADDR,iommu=IOMMU,id=ID + +The old dma=none becomes iommu=off with -device. + +The old way to assign a host USB device is + + -usbdevice host:auto:BUS.ADDR:VID:PRID + +where any of BUS, ADDR, VID, PRID can be the wildcard *. + +The new way is + + -device usb-host,hostbus=BUS,hostaddr=ADDR,vendorid=VID,productid=PRID + +Omitted options match anything, just like the old way's wildcard. + +=== Default Devices === + +QEMU creates a number of devices by default, depending on the machine +type. + +-device DEVNAME... and global DEVNAME... suppress default devices for +some DEVNAMEs: + + default device suppressing DEVNAMEs + CD-ROM ide-cd, ide-drive, scsi-cd + isa-fdc's driveA isa-fdc + parallel isa-parallel + serial isa-serial + VGA VGA, cirrus-vga, vmware-svga + virtioconsole virtio-serial-pci, virtio-serial-s390, virtio-serial + +The default NIC is connected to a default part created along with it. +It is *not* suppressed by configuring a NIC with -device (you may call +that a bug). -net and -netdev suppress the default NIC. + +-nodefaults suppresses all the default devices mentioned above, plus a +few other things such as default SD-Card drive and default monitor.