X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=nsb_setup.sh;h=28d31967f0d1cecb687dc17362c3eba3a50888ef;hb=269c070a51389914c87b8f2c66a199ecabb6c5bb;hp=332c0345ca9cabf271d6308d0bc6eca2d7f8eb33;hpb=dfda13a6a3eadeb316f391a91052da2820dcb9b7;p=yardstick.git

diff --git a/nsb_setup.sh b/nsb_setup.sh
index 332c0345c..28d31967f 100755
--- a/nsb_setup.sh
+++ b/nsb_setup.sh
@@ -1,5 +1,5 @@
-#! /bin/bash
-# Copyright (c) 2016-2017 Intel Corporation
+#!/usr/bin/env bash
+# Copyright (c) 2017 Intel Corporation.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -13,233 +13,41 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-#
-# Change to yardstick directory ( <current-dir>/.. ), and export it as REPO_DIR
-#
-cd "$(dirname "${BASH_SOURCE[0]}")"
-export REPO_DIR=$PWD
-echo "------------------------------------------------------------------------------"
-echo " REPO_DIR exported as $REPO_DIR"
-echo "------------------------------------------------------------------------------"
-
-if [ "$(whoami)" != "root" ]; then
-    echo "Must be root to run $0"
-    exit 1;
-fi
-
-INSTALL_BIN_PATH="/opt/nsb_bin"
-TREX_VERSION="v2.20"
-TREX_DOWNLOAD="https://trex-tgn.cisco.com/trex/release/$TREX_VERSION.tar.gz"
-DPDK_DOWNLOAD="http://dpdk.org/browse/dpdk/snapshot/dpdk-16.07.zip"
-VIRTUAL_VENV="$INSTALL_BIN_PATH/yardstick_venv"
-
-#
-# Install libs needed for NSB
-#
-install_libs()
-{
-    echo "Install libs needed to build and run NSB Testing..."
-    apt-get update > /dev/null 2>&1
-    pkg=(git build-essential python-dev virtualenv python-virtualenv virtualenv linux-headers-$(uname -r) unzip  python-pip libpcap-dev)
-    for i in "${pkg[@]}"; do
+apt-get update > /dev/null 2>&1
+pkg=(python-pip build-essential libssl-dev libffi-dev python3-dev python-dev)
+for i in "${pkg[@]}"; do
     dpkg-query -W --showformat='${Status}\n' "${i}"|grep "install ok installed"
     if [  "$?" -eq "1" ]; then
         apt-get -y install "${i}";
     fi
-    done
-    echo "Done"
-}
-
-install_yardstick()
-{
-    echo "Create install directory... $INSTALL_BIN_PATH"
-    mkdir -p $INSTALL_BIN_PATH
-    echo "Install yardstick dependencies and build Yardstick in venv..."
-    pushd .
-    rm -rf $VIRTUAL_VENV
-    echo $VIRTUAL_VENV
-    virtualenv $VIRTUAL_VENV
-    if [ ! -f "$INSTALL_BIN_PATH/yardstick_venv/bin/activate" ]; then
-         echo "Installation Error. Failed to create yardstick virtual env..."
-         exit 1
-    fi
-    source $VIRTUAL_VENV/bin/activate
-    bash ./install.sh
-    python setup.py install
-    popd
-
-    pushd .
-    echo "Copying yardstick sample conf & pod file to /etc/yardstick/nodes"
-    mkdir -p /etc/yardstick/nodes
-    cp "$REPO_DIR/etc/yardstick/yardstick.conf.sample" "/etc/yardstick/yardstick.conf"
-    cp "$REPO_DIR/etc/yardstick/nodes/pod.yaml.nsb.sample" "/etc/yardstick/nodes/"
-    popd
-}
-
-#
-# Install trex for TH setup
-#
-install_trex()
-{
-    TREX_DIR=$INSTALL_BIN_PATH/trex/scripts
-    if [ -d "$TREX_DIR" ]; then
-        echo "Trex v2.20 already installed. Make sure it contains PYTHONPATH which is required to run TRex"
-    else
-        echo "Build TRex and installing Trex TG in $INSTALL_BIN_PATH/trex"
-        rm -rf ${TREX_DOWNLOAD##*/}
-        if [ ! -e ${TREX_DOWNLOAD##*/} ] ; then
-            wget $TREX_DOWNLOAD
-        fi
-        tar zxvf ${TREX_DOWNLOAD##*/}
-        pushd .
-        rm -rf trex
-        mkdir -p trex
-        mv $TREX_VERSION trex/scripts
-        rm -rf $TREX_VERSION.tar.gz
-        cd trex/scripts/ko/src/
-        make
-        make install
-        # workaround trex module issue
-        touch "$REPO_DIR/trex/scripts/automation/trex_control_plane/stl/__init__.py"
-        cp "$REPO_DIR/trex/scripts/dpdk_nic_bind.py" "$INSTALL_BIN_PATH"
-        popd
-    fi
-    echo "Done."
-}
-
-install_dpdk()
-{
-    if [ -d "$INSTALL_BIN_PATH/dpdk-16.07" ]; then
-        echo "DPDK already installed make sure.. igb_uio is loaded."
-    else
-        echo "Build DPDK 16.07..."
-        pushd .
-        rm -rf ${DPDK_DOWNLOAD##*/}
-        rm -rf "$REPO_DIR/dpdk-16.07/"
-        if [ ! -e ${DPDK_DOWNLOAD##*/} ] ; then
-            wget ${DPDK_DOWNLOAD}
-        fi
-        unzip -o ${DPDK_DOWNLOAD##*/}
-
-        cd dpdk-16.07
-        make config T=x86_64-native-linuxapp-gcc O=x86_64-native-linuxapp-gcc
-        cd x86_64-native-linuxapp-gcc
-        echo "Enable Port Stats..."
-        sed -i -e 's/CONFIG_RTE_PORT_STATS_COLLECT=n/CONFIG_RTE_PORT_STATS_COLLECT=y/g' .config
-        sed -i -e 's/CONFIG_RTE_PORT_PCAP=n/CONFIG_RTE_PORT_PCAP=y/g' .config
-        sed -i -e 's/CONFIG_RTE_TABLE_STATS_COLLECT=n/CONFIG_RTE_TABLE_STATS_COLLECT=y/g' .config
-        sed -i -e 's/CONFIG_RTE_PIPELINE_STATS_COLLECT=n/CONFIG_RTE_PIPELINE_STATS_COLLECT=y/g' .config
-        make
-
-        echo "Load DPDK modules and setup hugepages"
-        modprobe uio
-        mkdir -p "/lib/modules/$(uname -r)/extra"
-        cp -r "kmod/igb_uio.ko" "/lib/modules/$(uname -r)/extra"
-        depmod -a
-        modprobe igb_uio
-        sh -c "echo 'uio\nigb_uio\n' > /etc/modules-load.d/nsb.conf"
+done
 
-        HUGEPGSZ=$(cat < /proc/meminfo  | grep Hugepagesize | cut -d : -f 2 | tr -d ' ')
-        Pages=16
-        if [[ "$HUGEPGSZ" = "2048kB" ]] ; then
-            Pages=16384
-        fi
-        grep nr_hugepages /etc/sysctl.conf
-        if [[ "$?" -eq '1' ]] ; then
-            sh -c "echo 'vm.nr_hugepages=$Pages' >> /etc/sysctl.conf"
-        fi
-            echo "echo $Pages > /sys/kernel/mm/hugepages/hugepages-${HUGEPGSZ}/nr_hugepages" > .echo_tmp
-            echo "Reserving hugepages"
-            sudo sh .echo_tmp
-            rm -f .echo_tmp
+pip install ansible==2.3.2 shade==1.17.0 docker-py==1.10.6
 
-            service procps start
-            echo "Creating /mnt/huge and mounting as hugetlbfs"
-            sudo mkdir -p /mnt/huge
-
-            grep -s '/mnt/huge' /proc/mounts > /dev/null
-            if [ $? -ne 0 ] ; then
-                sudo mount -t hugetlbfs nodev /mnt/huge
-            fi
-            popd
-            mv "$REPO_DIR/dpdk-16.07" "$INSTALL_BIN_PATH"
-            rm dpdk-16.07.zip
-    fi
-    export RTE_SDK="$INSTALL_BIN_PATH/dpdk-16.07"
-    export RTE_TARGET=x86_64-native-linuxapp-gcc
-
-    if [ ! -f "$INSTALL_BIN_PATH/vPE_vnf" ]; then
-        pushd .
-        echo "Building vPE VNF..."
-        cd $INSTALL_BIN_PATH/dpdk-16.07/examples/ip_pipeline/
-        make clean
-        make
-        cp build/ip_pipeline $INSTALL_BIN_PATH/vPE_vnf
-        popd
-    fi
-    echo "Done"
-}
-
-
-push_nsb_binary()
-{
-    if [ ! -d "$INSTALL_BIN_PATH/trex/scripts" ]; then
-        cp -fr "$REPO_DIR/trex" "$INSTALL_BIN_PATH"
-    fi
-    rm -rf "$REPO_DIR/trex"
-
-    if [ -d "$INSTALL_BIN_PATH/trex" ]; then
-        echo "Setup Environment variables for Test Harness...."
-        PYTHONPATH="$INSTALL_BIN_PATH/trex/scripts/automation/trex_control_plane:$INSTALL_BIN_PATH/trex/scripts/automation/trex_control_plane/stl"
-        PY_PATH=$(grep PYTHONPATH ~/.bash_profile)
-        if [ "$PY_PATH" = "" ] ; then
-            sh -c "echo export PYTHONPATH=$PYTHONPATH >> ~/.bash_profile" > /dev/null
-        else
-            echo "Your ~/.bash_profile already contains a PYTHONPATH definition."
-            echo "Make sure it contains $PYTHONPATH which is required to run TRex"
-        fi
-    fi
-    cp "$REPO_DIR/yardstick/network_services/nfvi/collectd.sh" "$INSTALL_BIN_PATH"
-    cp "$REPO_DIR/yardstick/network_services/nfvi/collectd.conf" "$INSTALL_BIN_PATH"
-    cp "$REPO_DIR/nsb_setup.sh" "$INSTALL_BIN_PATH"
-    echo "Done"
-}
-
-check_installed_files()
-{
-    if [ ! -f "$INSTALL_BIN_PATH/yardstick_venv/bin/activate" ]; then
-        echo "Installation Error. Failed to create yardstick virtual env..."
-        exit 1
-    fi
+if [ $# -eq 1 ]; then
+    OPENRC=$(readlink -f -- "$1")
+    extra_args="-e openrc_file=${OPENRC}"
+    source "${OPENRC}"
+    CONTROLLER_IP=$(echo ${OS_AUTH_URL} | sed -ne "s/http:\/\/\(.*\):.*/\1/p")
+    export no_proxy="localhost,127.0.0.1,${CONTROLLER_IP},$no_proxy"
+fi
 
-    if [ ! -d "$INSTALL_BIN_PATH/dpdk-16.07" ]; then
-        echo "Installation Error. Failed to download and install dpdk-16.07..."
-        exit 1
-    fi
+if [ "$http_proxy" != "" ] || [ "$https_proxy" != "" ]; then
+    extra_args="${extra_args} -e @/tmp/proxy.yml"
 
-    if [ ! -d "$INSTALL_BIN_PATH/trex" ]; then
-        echo "Installation Error. Failed to download and configure Trex"
-        exit 1
-    fi
+    cat <<EOF > /tmp/proxy.yml
+---
+proxy_env:
+  http_proxy: $http_proxy
+  https_proxy: $https_proxy
+  no_proxy: $no_proxy
+EOF
+fi
 
-    if [ ! -f "$INSTALL_BIN_PATH/vPE_vnf" ]; then
-        echo "Installation Error. vPE VNF not present in install dir $INSTALL_BIN_PATH"
-        exit 1
-    fi
-}
+ANSIBLE_SCRIPTS="ansible"
 
-if [ "$1" == "dpdk" ]; then
-   install_libs
-   install_dpdk
-else
-   install_libs
-   install_yardstick
-   install_dpdk
-   install_trex
-   push_nsb_binary
-   check_installed_files
-clear
-echo "Installation completed..."
-echo "Virtual Environment : $INSTALL_BIN_PATH/yardstick_venv"
-echo "Please Refer README.NSB.rst document on how to get started on VNF testing."
-fi
+cd ${ANSIBLE_SCRIPTS} &&\
+ansible-playbook \
+         -e img_modify_playbook='ubuntu_server_cloudimg_modify_samplevnfs.yml' \
+         -e YARD_IMG_ARCH='amd64' ${extra_args}\
+         -i yardstick-install-inventory.ini nsb_setup.yml