X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Finclude%2Flinux%2Finterrupt.h;fp=kernel%2Finclude%2Flinux%2Finterrupt.h;h=67f2af8c0cd59ca41cca9bd96cca16668df3d788;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/include/linux/interrupt.h b/kernel/include/linux/interrupt.h new file mode 100644 index 000000000..67f2af8c0 --- /dev/null +++ b/kernel/include/linux/interrupt.h @@ -0,0 +1,695 @@ +/* interrupt.h */ +#ifndef _LINUX_INTERRUPT_H +#define _LINUX_INTERRUPT_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* + * These correspond to the IORESOURCE_IRQ_* defines in + * linux/ioport.h to select the interrupt line behaviour. When + * requesting an interrupt without specifying a IRQF_TRIGGER, the + * setting should be assumed to be "as already configured", which + * may be as per machine or firmware initialisation. + */ +#define IRQF_TRIGGER_NONE 0x00000000 +#define IRQF_TRIGGER_RISING 0x00000001 +#define IRQF_TRIGGER_FALLING 0x00000002 +#define IRQF_TRIGGER_HIGH 0x00000004 +#define IRQF_TRIGGER_LOW 0x00000008 +#define IRQF_TRIGGER_MASK (IRQF_TRIGGER_HIGH | IRQF_TRIGGER_LOW | \ + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING) +#define IRQF_TRIGGER_PROBE 0x00000010 + +/* + * These flags used only by the kernel as part of the + * irq handling routines. + * + * IRQF_SHARED - allow sharing the irq among several devices + * IRQF_PROBE_SHARED - set by callers when they expect sharing mismatches to occur + * IRQF_TIMER - Flag to mark this interrupt as timer interrupt + * IRQF_PERCPU - Interrupt is per cpu + * IRQF_NOBALANCING - Flag to exclude this interrupt from irq balancing + * IRQF_IRQPOLL - Interrupt is used for polling (only the interrupt that is + * registered first in an shared interrupt is considered for + * performance reasons) + * IRQF_ONESHOT - Interrupt is not reenabled after the hardirq handler finished. + * Used by threaded interrupts which need to keep the + * irq line disabled until the threaded handler has been run. + * IRQF_NO_SUSPEND - Do not disable this IRQ during suspend. Does not guarantee + * that this interrupt will wake the system from a suspended + * state. See Documentation/power/suspend-and-interrupts.txt + * IRQF_FORCE_RESUME - Force enable it on resume even if IRQF_NO_SUSPEND is set + * IRQF_NO_THREAD - Interrupt cannot be threaded + * IRQF_EARLY_RESUME - Resume IRQ early during syscore instead of at device + * resume time. + * IRQF_COND_SUSPEND - If the IRQ is shared with a NO_SUSPEND user, execute this + * interrupt handler after suspending interrupts. For system + * wakeup devices users need to implement wakeup detection in + * their interrupt handlers. + * IRQF_NO_SOFTIRQ_CALL - Do not process softirqs in the irq thread context (RT) + */ +#define IRQF_SHARED 0x00000080 +#define IRQF_PROBE_SHARED 0x00000100 +#define __IRQF_TIMER 0x00000200 +#define IRQF_PERCPU 0x00000400 +#define IRQF_NOBALANCING 0x00000800 +#define IRQF_IRQPOLL 0x00001000 +#define IRQF_ONESHOT 0x00002000 +#define IRQF_NO_SUSPEND 0x00004000 +#define IRQF_FORCE_RESUME 0x00008000 +#define IRQF_NO_THREAD 0x00010000 +#define IRQF_EARLY_RESUME 0x00020000 +#define IRQF_COND_SUSPEND 0x00040000 +#define IRQF_NO_SOFTIRQ_CALL 0x00080000 + +#define IRQF_TIMER (__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD) + +/* + * These values can be returned by request_any_context_irq() and + * describe the context the interrupt will be run in. + * + * IRQC_IS_HARDIRQ - interrupt runs in hardirq context + * IRQC_IS_NESTED - interrupt runs in a nested threaded context + */ +enum { + IRQC_IS_HARDIRQ = 0, + IRQC_IS_NESTED, +}; + +typedef irqreturn_t (*irq_handler_t)(int, void *); + +/** + * struct irqaction - per interrupt action descriptor + * @handler: interrupt handler function + * @name: name of the device + * @dev_id: cookie to identify the device + * @percpu_dev_id: cookie to identify the device + * @next: pointer to the next irqaction for shared interrupts + * @irq: interrupt number + * @flags: flags (see IRQF_* above) + * @thread_fn: interrupt handler function for threaded interrupts + * @thread: thread pointer for threaded interrupts + * @thread_flags: flags related to @thread + * @thread_mask: bitmask for keeping track of @thread activity + * @dir: pointer to the proc/irq/NN/name entry + */ +struct irqaction { + irq_handler_t handler; + void *dev_id; + void __percpu *percpu_dev_id; + struct irqaction *next; + irq_handler_t thread_fn; + struct task_struct *thread; + unsigned int irq; + unsigned int flags; + unsigned long thread_flags; + unsigned long thread_mask; + const char *name; + struct proc_dir_entry *dir; +} ____cacheline_internodealigned_in_smp; + +extern irqreturn_t no_action(int cpl, void *dev_id); + +extern int __must_check +request_threaded_irq(unsigned int irq, irq_handler_t handler, + irq_handler_t thread_fn, + unsigned long flags, const char *name, void *dev); + +static inline int __must_check +request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, + const char *name, void *dev) +{ + return request_threaded_irq(irq, handler, NULL, flags, name, dev); +} + +extern int __must_check +request_any_context_irq(unsigned int irq, irq_handler_t handler, + unsigned long flags, const char *name, void *dev_id); + +extern int __must_check +request_percpu_irq(unsigned int irq, irq_handler_t handler, + const char *devname, void __percpu *percpu_dev_id); + +extern void free_irq(unsigned int, void *); +extern void free_percpu_irq(unsigned int, void __percpu *); + +struct device; + +extern int __must_check +devm_request_threaded_irq(struct device *dev, unsigned int irq, + irq_handler_t handler, irq_handler_t thread_fn, + unsigned long irqflags, const char *devname, + void *dev_id); + +static inline int __must_check +devm_request_irq(struct device *dev, unsigned int irq, irq_handler_t handler, + unsigned long irqflags, const char *devname, void *dev_id) +{ + return devm_request_threaded_irq(dev, irq, handler, NULL, irqflags, + devname, dev_id); +} + +extern int __must_check +devm_request_any_context_irq(struct device *dev, unsigned int irq, + irq_handler_t handler, unsigned long irqflags, + const char *devname, void *dev_id); + +extern void devm_free_irq(struct device *dev, unsigned int irq, void *dev_id); + +/* + * On lockdep we dont want to enable hardirqs in hardirq + * context. Use local_irq_enable_in_hardirq() to annotate + * kernel code that has to do this nevertheless (pretty much + * the only valid case is for old/broken hardware that is + * insanely slow). + * + * NOTE: in theory this might break fragile code that relies + * on hardirq delivery - in practice we dont seem to have such + * places left. So the only effect should be slightly increased + * irqs-off latencies. + */ +#ifdef CONFIG_LOCKDEP +# define local_irq_enable_in_hardirq() do { } while (0) +#else +# define local_irq_enable_in_hardirq() local_irq_enable_nort() +#endif + +extern void disable_irq_nosync(unsigned int irq); +extern bool disable_hardirq(unsigned int irq); +extern void disable_irq(unsigned int irq); +extern void disable_percpu_irq(unsigned int irq); +extern void enable_irq(unsigned int irq); +extern void enable_percpu_irq(unsigned int irq, unsigned int type); +extern void irq_wake_thread(unsigned int irq, void *dev_id); + +/* The following three functions are for the core kernel use only. */ +extern void suspend_device_irqs(void); +extern void resume_device_irqs(void); + +/** + * struct irq_affinity_notify - context for notification of IRQ affinity changes + * @irq: Interrupt to which notification applies + * @kref: Reference count, for internal use + * @work: Work item, for internal use + * @notify: Function to be called on change. This will be + * called in process context. + * @release: Function to be called on release. This will be + * called in process context. Once registered, the + * structure must only be freed when this function is + * called or later. + */ +struct irq_affinity_notify { + unsigned int irq; + struct kref kref; + struct work_struct work; + struct list_head list; + void (*notify)(struct irq_affinity_notify *, const cpumask_t *mask); + void (*release)(struct kref *ref); +}; + +#if defined(CONFIG_SMP) + +extern cpumask_var_t irq_default_affinity; + +/* Internal implementation. Use the helpers below */ +extern int __irq_set_affinity(unsigned int irq, const struct cpumask *cpumask, + bool force); + +/** + * irq_set_affinity - Set the irq affinity of a given irq + * @irq: Interrupt to set affinity + * @cpumask: cpumask + * + * Fails if cpumask does not contain an online CPU + */ +static inline int +irq_set_affinity(unsigned int irq, const struct cpumask *cpumask) +{ + return __irq_set_affinity(irq, cpumask, false); +} + +/** + * irq_force_affinity - Force the irq affinity of a given irq + * @irq: Interrupt to set affinity + * @cpumask: cpumask + * + * Same as irq_set_affinity, but without checking the mask against + * online cpus. + * + * Solely for low level cpu hotplug code, where we need to make per + * cpu interrupts affine before the cpu becomes online. + */ +static inline int +irq_force_affinity(unsigned int irq, const struct cpumask *cpumask) +{ + return __irq_set_affinity(irq, cpumask, true); +} + +extern int irq_can_set_affinity(unsigned int irq); +extern int irq_select_affinity(unsigned int irq); + +extern int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m); + +extern int +irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify); + +#else /* CONFIG_SMP */ + +static inline int irq_set_affinity(unsigned int irq, const struct cpumask *m) +{ + return -EINVAL; +} + +static inline int irq_force_affinity(unsigned int irq, const struct cpumask *cpumask) +{ + return 0; +} + +static inline int irq_can_set_affinity(unsigned int irq) +{ + return 0; +} + +static inline int irq_select_affinity(unsigned int irq) { return 0; } + +static inline int irq_set_affinity_hint(unsigned int irq, + const struct cpumask *m) +{ + return -EINVAL; +} + +static inline int +irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify) +{ + return 0; +} +#endif /* CONFIG_SMP */ + +/* + * Special lockdep variants of irq disabling/enabling. + * These should be used for locking constructs that + * know that a particular irq context which is disabled, + * and which is the only irq-context user of a lock, + * that it's safe to take the lock in the irq-disabled + * section without disabling hardirqs. + * + * On !CONFIG_LOCKDEP they are equivalent to the normal + * irq disable/enable methods. + */ +static inline void disable_irq_nosync_lockdep(unsigned int irq) +{ + disable_irq_nosync(irq); +#ifdef CONFIG_LOCKDEP + local_irq_disable(); +#endif +} + +static inline void disable_irq_nosync_lockdep_irqsave(unsigned int irq, unsigned long *flags) +{ + disable_irq_nosync(irq); +#ifdef CONFIG_LOCKDEP + local_irq_save(*flags); +#endif +} + +static inline void disable_irq_lockdep(unsigned int irq) +{ + disable_irq(irq); +#ifdef CONFIG_LOCKDEP + local_irq_disable(); +#endif +} + +static inline void enable_irq_lockdep(unsigned int irq) +{ +#ifdef CONFIG_LOCKDEP + local_irq_enable(); +#endif + enable_irq(irq); +} + +static inline void enable_irq_lockdep_irqrestore(unsigned int irq, unsigned long *flags) +{ +#ifdef CONFIG_LOCKDEP + local_irq_restore(*flags); +#endif + enable_irq(irq); +} + +/* IRQ wakeup (PM) control: */ +extern int irq_set_irq_wake(unsigned int irq, unsigned int on); + +static inline int enable_irq_wake(unsigned int irq) +{ + return irq_set_irq_wake(irq, 1); +} + +static inline int disable_irq_wake(unsigned int irq) +{ + return irq_set_irq_wake(irq, 0); +} + +/* + * irq_get_irqchip_state/irq_set_irqchip_state specific flags + */ +enum irqchip_irq_state { + IRQCHIP_STATE_PENDING, /* Is interrupt pending? */ + IRQCHIP_STATE_ACTIVE, /* Is interrupt in progress? */ + IRQCHIP_STATE_MASKED, /* Is interrupt masked? */ + IRQCHIP_STATE_LINE_LEVEL, /* Is IRQ line high? */ +}; + +extern int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which, + bool *state); +extern int irq_set_irqchip_state(unsigned int irq, enum irqchip_irq_state which, + bool state); + +#ifdef CONFIG_IRQ_FORCED_THREADING +# ifndef CONFIG_PREEMPT_RT_BASE +extern bool force_irqthreads; +# else +# define force_irqthreads (true) +# endif +#else +#define force_irqthreads (false) +#endif + +#ifndef __ARCH_SET_SOFTIRQ_PENDING +#define set_softirq_pending(x) (local_softirq_pending() = (x)) +#define or_softirq_pending(x) (local_softirq_pending() |= (x)) +#endif + +/* Some architectures might implement lazy enabling/disabling of + * interrupts. In some cases, such as stop_machine, we might want + * to ensure that after a local_irq_disable(), interrupts have + * really been disabled in hardware. Such architectures need to + * implement the following hook. + */ +#ifndef hard_irq_disable +#define hard_irq_disable() do { } while(0) +#endif + +/* PLEASE, avoid to allocate new softirqs, if you need not _really_ high + frequency threaded job scheduling. For almost all the purposes + tasklets are more than enough. F.e. all serial device BHs et + al. should be converted to tasklets, not to softirqs. + */ + +enum +{ + HI_SOFTIRQ=0, + TIMER_SOFTIRQ, + NET_TX_SOFTIRQ, + NET_RX_SOFTIRQ, + BLOCK_SOFTIRQ, + BLOCK_IOPOLL_SOFTIRQ, + TASKLET_SOFTIRQ, + SCHED_SOFTIRQ, + HRTIMER_SOFTIRQ, + RCU_SOFTIRQ, /* Preferable RCU should always be the last softirq */ + + NR_SOFTIRQS +}; + +#define SOFTIRQ_STOP_IDLE_MASK (~(1 << RCU_SOFTIRQ)) + +/* map softirq index to softirq name. update 'softirq_to_name' in + * kernel/softirq.c when adding a new softirq. + */ +extern const char * const softirq_to_name[NR_SOFTIRQS]; + +/* softirq mask and active fields moved to irq_cpustat_t in + * asm/hardirq.h to get better cache usage. KAO + */ + +struct softirq_action +{ + void (*action)(struct softirq_action *); +}; + +#ifndef CONFIG_PREEMPT_RT_FULL +asmlinkage void do_softirq(void); +asmlinkage void __do_softirq(void); +static inline void thread_do_softirq(void) { do_softirq(); } +#ifdef __ARCH_HAS_DO_SOFTIRQ +void do_softirq_own_stack(void); +#else +static inline void do_softirq_own_stack(void) +{ + __do_softirq(); +} +#endif +#else +extern void thread_do_softirq(void); +#endif + +extern void open_softirq(int nr, void (*action)(struct softirq_action *)); +extern void softirq_init(void); +extern void __raise_softirq_irqoff(unsigned int nr); + +extern void raise_softirq_irqoff(unsigned int nr); +extern void raise_softirq(unsigned int nr); +extern void softirq_check_pending_idle(void); + +DECLARE_PER_CPU(struct task_struct *, ksoftirqd); + +static inline struct task_struct *this_cpu_ksoftirqd(void) +{ + return this_cpu_read(ksoftirqd); +} + +/* Tasklets --- multithreaded analogue of BHs. + + Main feature differing them of generic softirqs: tasklet + is running only on one CPU simultaneously. + + Main feature differing them of BHs: different tasklets + may be run simultaneously on different CPUs. + + Properties: + * If tasklet_schedule() is called, then tasklet is guaranteed + to be executed on some cpu at least once after this. + * If the tasklet is already scheduled, but its execution is still not + started, it will be executed only once. + * If this tasklet is already running on another CPU, it is rescheduled + for later. + * Schedule must not be called from the tasklet itself (a lockup occurs) + * Tasklet is strictly serialized wrt itself, but not + wrt another tasklets. If client needs some intertask synchronization, + he makes it with spinlocks. + */ + +struct tasklet_struct +{ + struct tasklet_struct *next; + unsigned long state; + atomic_t count; + void (*func)(unsigned long); + unsigned long data; +}; + +#define DECLARE_TASKLET(name, func, data) \ +struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(0), func, data } + +#define DECLARE_TASKLET_DISABLED(name, func, data) \ +struct tasklet_struct name = { NULL, 0, ATOMIC_INIT(1), func, data } + + +enum +{ + TASKLET_STATE_SCHED, /* Tasklet is scheduled for execution */ + TASKLET_STATE_RUN, /* Tasklet is running (SMP only) */ + TASKLET_STATE_PENDING /* Tasklet is pending */ +}; + +#define TASKLET_STATEF_SCHED (1 << TASKLET_STATE_SCHED) +#define TASKLET_STATEF_RUN (1 << TASKLET_STATE_RUN) +#define TASKLET_STATEF_PENDING (1 << TASKLET_STATE_PENDING) + +#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT_FULL) +static inline int tasklet_trylock(struct tasklet_struct *t) +{ + return !test_and_set_bit(TASKLET_STATE_RUN, &(t)->state); +} + +static inline int tasklet_tryunlock(struct tasklet_struct *t) +{ + return cmpxchg(&t->state, TASKLET_STATEF_RUN, 0) == TASKLET_STATEF_RUN; +} + +static inline void tasklet_unlock(struct tasklet_struct *t) +{ + smp_mb__before_atomic(); + clear_bit(TASKLET_STATE_RUN, &(t)->state); +} + +extern void tasklet_unlock_wait(struct tasklet_struct *t); + +#else +#define tasklet_trylock(t) 1 +#define tasklet_tryunlock(t) 1 +#define tasklet_unlock_wait(t) do { } while (0) +#define tasklet_unlock(t) do { } while (0) +#endif + +extern void __tasklet_schedule(struct tasklet_struct *t); + +static inline void tasklet_schedule(struct tasklet_struct *t) +{ + if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) + __tasklet_schedule(t); +} + +extern void __tasklet_hi_schedule(struct tasklet_struct *t); + +static inline void tasklet_hi_schedule(struct tasklet_struct *t) +{ + if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) + __tasklet_hi_schedule(t); +} + +extern void __tasklet_hi_schedule_first(struct tasklet_struct *t); + +/* + * This version avoids touching any other tasklets. Needed for kmemcheck + * in order not to take any page faults while enqueueing this tasklet; + * consider VERY carefully whether you really need this or + * tasklet_hi_schedule()... + */ +static inline void tasklet_hi_schedule_first(struct tasklet_struct *t) +{ + if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) + __tasklet_hi_schedule_first(t); +} + + +static inline void tasklet_disable_nosync(struct tasklet_struct *t) +{ + atomic_inc(&t->count); + smp_mb__after_atomic(); +} + +static inline void tasklet_disable(struct tasklet_struct *t) +{ + tasklet_disable_nosync(t); + tasklet_unlock_wait(t); + smp_mb(); +} + +extern void tasklet_enable(struct tasklet_struct *t); +extern void tasklet_kill(struct tasklet_struct *t); +extern void tasklet_kill_immediate(struct tasklet_struct *t, unsigned int cpu); +extern void tasklet_init(struct tasklet_struct *t, + void (*func)(unsigned long), unsigned long data); + +struct tasklet_hrtimer { + struct hrtimer timer; + struct tasklet_struct tasklet; + enum hrtimer_restart (*function)(struct hrtimer *); +}; + +extern void +tasklet_hrtimer_init(struct tasklet_hrtimer *ttimer, + enum hrtimer_restart (*function)(struct hrtimer *), + clockid_t which_clock, enum hrtimer_mode mode); + +static inline +int tasklet_hrtimer_start(struct tasklet_hrtimer *ttimer, ktime_t time, + const enum hrtimer_mode mode) +{ + return hrtimer_start(&ttimer->timer, time, mode); +} + +static inline +void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer) +{ + hrtimer_cancel(&ttimer->timer); + tasklet_kill(&ttimer->tasklet); +} + +#ifdef CONFIG_PREEMPT_RT_FULL +extern void softirq_early_init(void); +#else +static inline void softirq_early_init(void) { } +#endif + +/* + * Autoprobing for irqs: + * + * probe_irq_on() and probe_irq_off() provide robust primitives + * for accurate IRQ probing during kernel initialization. They are + * reasonably simple to use, are not "fooled" by spurious interrupts, + * and, unlike other attempts at IRQ probing, they do not get hung on + * stuck interrupts (such as unused PS2 mouse interfaces on ASUS boards). + * + * For reasonably foolproof probing, use them as follows: + * + * 1. clear and/or mask the device's internal interrupt. + * 2. sti(); + * 3. irqs = probe_irq_on(); // "take over" all unassigned idle IRQs + * 4. enable the device and cause it to trigger an interrupt. + * 5. wait for the device to interrupt, using non-intrusive polling or a delay. + * 6. irq = probe_irq_off(irqs); // get IRQ number, 0=none, negative=multiple + * 7. service the device to clear its pending interrupt. + * 8. loop again if paranoia is required. + * + * probe_irq_on() returns a mask of allocated irq's. + * + * probe_irq_off() takes the mask as a parameter, + * and returns the irq number which occurred, + * or zero if none occurred, or a negative irq number + * if more than one irq occurred. + */ + +#if !defined(CONFIG_GENERIC_IRQ_PROBE) +static inline unsigned long probe_irq_on(void) +{ + return 0; +} +static inline int probe_irq_off(unsigned long val) +{ + return 0; +} +static inline unsigned int probe_irq_mask(unsigned long val) +{ + return 0; +} +#else +extern unsigned long probe_irq_on(void); /* returns 0 on failure */ +extern int probe_irq_off(unsigned long); /* returns 0 or negative on failure */ +extern unsigned int probe_irq_mask(unsigned long); /* returns mask of ISA interrupts */ +#endif + +#ifdef CONFIG_PROC_FS +/* Initialize /proc/irq/ */ +extern void init_irq_proc(void); +#else +static inline void init_irq_proc(void) +{ +} +#endif + +struct seq_file; +int show_interrupts(struct seq_file *p, void *v); +int arch_show_interrupts(struct seq_file *p, int prec); + +extern int early_irq_init(void); +extern int arch_probe_nr_irqs(void); +extern int arch_early_irq_init(void); + +#endif