X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Finclude%2Flinux%2Fbrcmphy.h;h=59f4a73044199aa4fdafbd7e67578f3c000fd527;hb=e09b41010ba33a20a87472ee821fa407a5b8da36;hp=656da2a12ffee319f67cb744945f028599e0603c;hpb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;p=kvmfornfv.git

diff --git a/kernel/include/linux/brcmphy.h b/kernel/include/linux/brcmphy.h
index 656da2a12..59f4a7304 100644
--- a/kernel/include/linux/brcmphy.h
+++ b/kernel/include/linux/brcmphy.h
@@ -1,6 +1,13 @@
 #ifndef _LINUX_BRCMPHY_H
 #define _LINUX_BRCMPHY_H
 
+#include <linux/phy.h>
+
+/* All Broadcom Ethernet switches have a pseudo-PHY at address 30 which is used
+ * to configure the switch internal registers via MDIO accesses.
+ */
+#define BRCM_PSEUDO_PHY_ADDR           30
+
 #define PHY_ID_BCM50610			0x0143bd60
 #define PHY_ID_BCM50610M		0x0143bd70
 #define PHY_ID_BCM5241			0x0143bc30
@@ -23,6 +30,8 @@
 #define PHY_ID_BCM7439_2		0xae025080
 #define PHY_ID_BCM7445			0x600d8510
 
+#define PHY_ID_BCM_CYGNUS		0xae025200
+
 #define PHY_BCM_OUI_MASK		0xfffffc00
 #define PHY_BCM_OUI_1			0x00206000
 #define PHY_BCM_OUI_2			0x0143bc00
@@ -131,7 +140,10 @@
 
 /* 01010: Auto Power-Down */
 #define BCM54XX_SHD_APD			0x0a
+#define  BCM_APD_CLR_MASK		0xFE9F /* clear bits 5, 6 & 8 */
 #define  BCM54XX_SHD_APD_EN		0x0020
+#define  BCM_NO_ANEG_APD_EN		0x0060 /* bits 5 & 6 */
+#define  BCM_APD_SINGLELP_EN	0x0100 /* Bit 8 */
 
 #define BCM5482_SHD_LEDS1	0x0d	/* 01101: LED Selector 1 */
 					/* LED3 / ~LINKSPD[2] selector */
@@ -202,27 +214,13 @@
 #define MII_BRCM_FET_SHDW_AUXSTAT2	0x1b	/* Auxiliary status 2 */
 #define MII_BRCM_FET_SHDW_AS2_APDE	0x0020	/* Auto power down enable */
 
-/*
- * Indirect register access functions for the 1000BASE-T/100BASE-TX/10BASE-T
- * 0x1c shadow registers.
- */
-static inline int bcm54xx_shadow_read(struct phy_device *phydev, u16 shadow)
-{
-	phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow));
-	return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD));
-}
-
-static inline int bcm54xx_shadow_write(struct phy_device *phydev, u16 shadow,
-				       u16 val)
-{
-	return phy_write(phydev, MII_BCM54XX_SHD,
-			 MII_BCM54XX_SHD_WRITE |
-			 MII_BCM54XX_SHD_VAL(shadow) |
-			 MII_BCM54XX_SHD_DATA(val));
-}
-
 #define BRCM_CL45VEN_EEE_CONTROL	0x803d
 #define LPI_FEATURE_EN			0x8000
 #define LPI_FEATURE_EN_DIG1000X		0x4000
 
+/* Core register definitions*/
+#define MII_BRCM_CORE_BASE1E	0x1E
+#define MII_BRCM_CORE_EXPB0	0xB0
+#define MII_BRCM_CORE_EXPB1	0xB1
+
 #endif /* _LINUX_BRCMPHY_H */