X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fusb%2Frenesas_usbhs%2Fcommon.c;fp=kernel%2Fdrivers%2Fusb%2Frenesas_usbhs%2Fcommon.c;h=0f7e850fd4aaff625f8c22e306d0496f358977be;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/usb/renesas_usbhs/common.c b/kernel/drivers/usb/renesas_usbhs/common.c new file mode 100644 index 000000000..0f7e850fd --- /dev/null +++ b/kernel/drivers/usb/renesas_usbhs/common.c @@ -0,0 +1,777 @@ +/* + * Renesas USB driver + * + * Copyright (C) 2011 Renesas Solutions Corp. + * Kuninori Morimoto + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "common.h" +#include "rcar2.h" + +/* + * image of renesas_usbhs + * + * ex) gadget case + + * mod.c + * mod_gadget.c + * mod_host.c pipe.c fifo.c + * + * +-------+ +-----------+ + * | pipe0 |------>| fifo pio | + * +------------+ +-------+ +-----------+ + * | mod_gadget |=====> | pipe1 |--+ + * +------------+ +-------+ | +-----------+ + * | pipe2 | | +-| fifo dma0 | + * +------------+ +-------+ | | +-----------+ + * | mod_host | | pipe3 |<-|--+ + * +------------+ +-------+ | +-----------+ + * | .... | +--->| fifo dma1 | + * | .... | +-----------+ + */ + + +#define USBHSF_RUNTIME_PWCTRL (1 << 0) + +/* status */ +#define usbhsc_flags_init(p) do {(p)->flags = 0; } while (0) +#define usbhsc_flags_set(p, b) ((p)->flags |= (b)) +#define usbhsc_flags_clr(p, b) ((p)->flags &= ~(b)) +#define usbhsc_flags_has(p, b) ((p)->flags & (b)) + +/* + * platform call back + * + * renesas usb support platform callback function. + * Below macro call it. + * if platform doesn't have callback, it return 0 (no error) + */ +#define usbhs_platform_call(priv, func, args...)\ + (!(priv) ? -ENODEV : \ + !((priv)->pfunc.func) ? 0 : \ + (priv)->pfunc.func(args)) + +/* + * common functions + */ +u16 usbhs_read(struct usbhs_priv *priv, u32 reg) +{ + return ioread16(priv->base + reg); +} + +void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data) +{ + iowrite16(data, priv->base + reg); +} + +void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data) +{ + u16 val = usbhs_read(priv, reg); + + val &= ~mask; + val |= data & mask; + + usbhs_write(priv, reg, val); +} + +struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev) +{ + return dev_get_drvdata(&pdev->dev); +} + +/* + * syscfg functions + */ +static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable) +{ + usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0); +} + +void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable) +{ + u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; + u16 val = DCFM | DRPD | HSE | USBE; + int has_otg = usbhs_get_dparam(priv, has_otg); + + if (has_otg) + usbhs_bset(priv, DVSTCTR, (EXTLP | PWEN), (EXTLP | PWEN)); + + /* + * if enable + * + * - select Host mode + * - D+ Line/D- Line Pull-down + */ + usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); +} + +void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable) +{ + u16 mask = DCFM | DRPD | DPRPU | HSE | USBE; + u16 val = HSE | USBE; + + /* + * if enable + * + * - select Function mode + * - D+ Line Pull-up is disabled + * When D+ Line Pull-up is enabled, + * calling usbhs_sys_function_pullup(,1) + */ + usbhs_bset(priv, SYSCFG, mask, enable ? val : 0); +} + +void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable) +{ + usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0); +} + +void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode) +{ + usbhs_write(priv, TESTMODE, mode); +} + +/* + * frame functions + */ +int usbhs_frame_get_num(struct usbhs_priv *priv) +{ + return usbhs_read(priv, FRMNUM) & FRNM_MASK; +} + +/* + * usb request functions + */ +void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) +{ + u16 val; + + val = usbhs_read(priv, USBREQ); + req->bRequest = (val >> 8) & 0xFF; + req->bRequestType = (val >> 0) & 0xFF; + + req->wValue = usbhs_read(priv, USBVAL); + req->wIndex = usbhs_read(priv, USBINDX); + req->wLength = usbhs_read(priv, USBLENG); +} + +void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req) +{ + usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType); + usbhs_write(priv, USBVAL, req->wValue); + usbhs_write(priv, USBINDX, req->wIndex); + usbhs_write(priv, USBLENG, req->wLength); + + usbhs_bset(priv, DCPCTR, SUREQ, SUREQ); +} + +/* + * bus/vbus functions + */ +void usbhs_bus_send_sof_enable(struct usbhs_priv *priv) +{ + u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT); + + if (status != USBRST) { + struct device *dev = usbhs_priv_to_dev(priv); + dev_err(dev, "usbhs should be reset\n"); + } + + usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT); +} + +void usbhs_bus_send_reset(struct usbhs_priv *priv) +{ + usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST); +} + +int usbhs_bus_get_speed(struct usbhs_priv *priv) +{ + u16 dvstctr = usbhs_read(priv, DVSTCTR); + + switch (RHST & dvstctr) { + case RHST_LOW_SPEED: + return USB_SPEED_LOW; + case RHST_FULL_SPEED: + return USB_SPEED_FULL; + case RHST_HIGH_SPEED: + return USB_SPEED_HIGH; + } + + return USB_SPEED_UNKNOWN; +} + +int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable) +{ + struct platform_device *pdev = usbhs_priv_to_pdev(priv); + + return usbhs_platform_call(priv, set_vbus, pdev, enable); +} + +static void usbhsc_bus_init(struct usbhs_priv *priv) +{ + usbhs_write(priv, DVSTCTR, 0); + + usbhs_vbus_ctrl(priv, 0); +} + +/* + * device configuration + */ +int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, + u16 upphub, u16 hubport, u16 speed) +{ + struct device *dev = usbhs_priv_to_dev(priv); + u16 usbspd = 0; + u32 reg = DEVADD0 + (2 * devnum); + + if (devnum > 10) { + dev_err(dev, "cannot set speed to unknown device %d\n", devnum); + return -EIO; + } + + if (upphub > 0xA) { + dev_err(dev, "unsupported hub number %d\n", upphub); + return -EIO; + } + + switch (speed) { + case USB_SPEED_LOW: + usbspd = USBSPD_SPEED_LOW; + break; + case USB_SPEED_FULL: + usbspd = USBSPD_SPEED_FULL; + break; + case USB_SPEED_HIGH: + usbspd = USBSPD_SPEED_HIGH; + break; + default: + dev_err(dev, "unsupported speed %d\n", speed); + return -EIO; + } + + usbhs_write(priv, reg, UPPHUB(upphub) | + HUBPORT(hubport)| + USBSPD(usbspd)); + + return 0; +} + +/* + * interrupt functions + */ +void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit) +{ + u16 pipe_mask = (u16)GENMASK(usbhs_get_dparam(priv, pipe_size), 0); + + usbhs_write(priv, sts_reg, ~(1 << bit) & pipe_mask); +} + +/* + * local functions + */ +static void usbhsc_set_buswait(struct usbhs_priv *priv) +{ + int wait = usbhs_get_dparam(priv, buswait_bwait); + + /* set bus wait if platform have */ + if (wait) + usbhs_bset(priv, BUSWAIT, 0x000F, wait); +} + +/* + * platform default param + */ + +/* commonly used on old SH-Mobile SoCs */ +static u32 usbhsc_default_pipe_type[] = { + USB_ENDPOINT_XFER_CONTROL, + USB_ENDPOINT_XFER_ISOC, + USB_ENDPOINT_XFER_ISOC, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, +}; + +/* commonly used on newer SH-Mobile and R-Car SoCs */ +static u32 usbhsc_new_pipe_type[] = { + USB_ENDPOINT_XFER_CONTROL, + USB_ENDPOINT_XFER_ISOC, + USB_ENDPOINT_XFER_ISOC, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_INT, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, + USB_ENDPOINT_XFER_BULK, +}; + +/* + * power control + */ +static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable) +{ + struct platform_device *pdev = usbhs_priv_to_pdev(priv); + struct device *dev = usbhs_priv_to_dev(priv); + + if (enable) { + /* enable PM */ + pm_runtime_get_sync(dev); + + /* enable platform power */ + usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable); + + /* USB on */ + usbhs_sys_clock_ctrl(priv, enable); + } else { + /* USB off */ + usbhs_sys_clock_ctrl(priv, enable); + + /* disable platform power */ + usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable); + + /* disable PM */ + pm_runtime_put_sync(dev); + } +} + +/* + * hotplug + */ +static void usbhsc_hotplug(struct usbhs_priv *priv) +{ + struct platform_device *pdev = usbhs_priv_to_pdev(priv); + struct usbhs_mod *mod = usbhs_mod_get_current(priv); + int id; + int enable; + int cable; + int ret; + + /* + * get vbus status from platform + */ + enable = usbhs_platform_call(priv, get_vbus, pdev); + + /* + * get id from platform + */ + id = usbhs_platform_call(priv, get_id, pdev); + + if (enable && !mod) { + if (priv->edev) { + cable = extcon_get_cable_state(priv->edev, "USB-HOST"); + if ((cable > 0 && id != USBHS_HOST) || + (!cable && id != USBHS_GADGET)) { + dev_info(&pdev->dev, + "USB cable plugged in doesn't match the selected role!\n"); + return; + } + } + + ret = usbhs_mod_change(priv, id); + if (ret < 0) + return; + + dev_dbg(&pdev->dev, "%s enable\n", __func__); + + /* power on */ + if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + usbhsc_power_ctrl(priv, enable); + + /* bus init */ + usbhsc_set_buswait(priv); + usbhsc_bus_init(priv); + + /* module start */ + usbhs_mod_call(priv, start, priv); + + } else if (!enable && mod) { + dev_dbg(&pdev->dev, "%s disable\n", __func__); + + /* module stop */ + usbhs_mod_call(priv, stop, priv); + + /* bus init */ + usbhsc_bus_init(priv); + + /* power off */ + if (usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + usbhsc_power_ctrl(priv, enable); + + usbhs_mod_change(priv, -1); + + /* reset phy for next connection */ + usbhs_platform_call(priv, phy_reset, pdev); + } +} + +/* + * notify hotplug + */ +static void usbhsc_notify_hotplug(struct work_struct *work) +{ + struct usbhs_priv *priv = container_of(work, + struct usbhs_priv, + notify_hotplug_work.work); + usbhsc_hotplug(priv); +} + +static int usbhsc_drvcllbck_notify_hotplug(struct platform_device *pdev) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + int delay = usbhs_get_dparam(priv, detection_delay); + + /* + * This functions will be called in interrupt. + * To make sure safety context, + * use workqueue for usbhs_notify_hotplug + */ + schedule_delayed_work(&priv->notify_hotplug_work, + msecs_to_jiffies(delay)); + return 0; +} + +/* + * platform functions + */ +static const struct of_device_id usbhs_of_match[] = { + { + .compatible = "renesas,usbhs-r8a7790", + .data = (void *)USBHS_TYPE_R8A7790, + }, + { + .compatible = "renesas,usbhs-r8a7791", + .data = (void *)USBHS_TYPE_R8A7791, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, usbhs_of_match); + +static struct renesas_usbhs_platform_info *usbhs_parse_dt(struct device *dev) +{ + struct renesas_usbhs_platform_info *info; + struct renesas_usbhs_driver_param *dparam; + const struct of_device_id *of_id = of_match_device(usbhs_of_match, dev); + u32 tmp; + int gpio; + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) + return NULL; + + dparam = &info->driver_param; + dparam->type = of_id ? (u32)of_id->data : 0; + if (!of_property_read_u32(dev->of_node, "renesas,buswait", &tmp)) + dparam->buswait_bwait = tmp; + gpio = of_get_named_gpio_flags(dev->of_node, "renesas,enable-gpio", 0, + NULL); + if (gpio > 0) + dparam->enable_gpio = gpio; + + switch (dparam->type) { + case USBHS_TYPE_R8A7790: + case USBHS_TYPE_R8A7791: + dparam->has_usb_dmac = 1; + break; + default: + break; + } + + return info; +} + +static int usbhs_probe(struct platform_device *pdev) +{ + struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev); + struct renesas_usbhs_driver_callback *dfunc; + struct usbhs_priv *priv; + struct resource *res, *irq_res; + int ret; + + /* check device node */ + if (pdev->dev.of_node) + info = pdev->dev.platform_data = usbhs_parse_dt(&pdev->dev); + + /* check platform information */ + if (!info) { + dev_err(&pdev->dev, "no platform information\n"); + return -EINVAL; + } + + /* platform data */ + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq_res) { + dev_err(&pdev->dev, "Not enough Renesas USB platform resources.\n"); + return -ENODEV; + } + + /* usb private data */ + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + if (of_property_read_bool(pdev->dev.of_node, "extcon")) { + priv->edev = extcon_get_edev_by_phandle(&pdev->dev, 0); + if (IS_ERR(priv->edev)) + return PTR_ERR(priv->edev); + } + + /* + * care platform info + */ + + memcpy(&priv->dparam, + &info->driver_param, + sizeof(struct renesas_usbhs_driver_param)); + + switch (priv->dparam.type) { + case USBHS_TYPE_R8A7790: + case USBHS_TYPE_R8A7791: + priv->pfunc = usbhs_rcar2_ops; + if (!priv->dparam.pipe_type) { + priv->dparam.pipe_type = usbhsc_new_pipe_type; + priv->dparam.pipe_size = + ARRAY_SIZE(usbhsc_new_pipe_type); + } + break; + default: + if (!info->platform_callback.get_id) { + dev_err(&pdev->dev, "no platform callbacks"); + return -EINVAL; + } + memcpy(&priv->pfunc, + &info->platform_callback, + sizeof(struct renesas_usbhs_platform_callback)); + break; + } + + /* set driver callback functions for platform */ + dfunc = &info->driver_callback; + dfunc->notify_hotplug = usbhsc_drvcllbck_notify_hotplug; + + /* set default param if platform doesn't have */ + if (!priv->dparam.pipe_type) { + priv->dparam.pipe_type = usbhsc_default_pipe_type; + priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe_type); + } + if (!priv->dparam.pio_dma_border) + priv->dparam.pio_dma_border = 64; /* 64byte */ + + /* FIXME */ + /* runtime power control ? */ + if (priv->pfunc.get_vbus) + usbhsc_flags_set(priv, USBHSF_RUNTIME_PWCTRL); + + /* + * priv settings + */ + priv->irq = irq_res->start; + if (irq_res->flags & IORESOURCE_IRQ_SHAREABLE) + priv->irqflags = IRQF_SHARED; + priv->pdev = pdev; + INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug); + spin_lock_init(usbhs_priv_to_lock(priv)); + + /* call pipe and module init */ + ret = usbhs_pipe_probe(priv); + if (ret < 0) + return ret; + + ret = usbhs_fifo_probe(priv); + if (ret < 0) + goto probe_end_pipe_exit; + + ret = usbhs_mod_probe(priv); + if (ret < 0) + goto probe_end_fifo_exit; + + /* dev_set_drvdata should be called after usbhs_mod_init */ + platform_set_drvdata(pdev, priv); + + /* + * deviece reset here because + * USB device might be used in boot loader. + */ + usbhs_sys_clock_ctrl(priv, 0); + + /* check GPIO determining if USB function should be enabled */ + if (priv->dparam.enable_gpio) { + gpio_request_one(priv->dparam.enable_gpio, GPIOF_IN, NULL); + ret = !gpio_get_value(priv->dparam.enable_gpio); + gpio_free(priv->dparam.enable_gpio); + if (ret) { + dev_warn(&pdev->dev, + "USB function not selected (GPIO %d)\n", + priv->dparam.enable_gpio); + ret = -ENOTSUPP; + goto probe_end_mod_exit; + } + } + + /* + * platform call + * + * USB phy setup might depend on CPU/Board. + * If platform has its callback functions, + * call it here. + */ + ret = usbhs_platform_call(priv, hardware_init, pdev); + if (ret < 0) { + dev_err(&pdev->dev, "platform init failed.\n"); + goto probe_end_mod_exit; + } + + /* reset phy for connection */ + usbhs_platform_call(priv, phy_reset, pdev); + + /* power control */ + pm_runtime_enable(&pdev->dev); + if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) { + usbhsc_power_ctrl(priv, 1); + usbhs_mod_autonomy_mode(priv); + } + + /* + * manual call notify_hotplug for cold plug + */ + usbhsc_drvcllbck_notify_hotplug(pdev); + + dev_info(&pdev->dev, "probed\n"); + + return ret; + +probe_end_mod_exit: + usbhs_mod_remove(priv); +probe_end_fifo_exit: + usbhs_fifo_remove(priv); +probe_end_pipe_exit: + usbhs_pipe_remove(priv); + + dev_info(&pdev->dev, "probe failed\n"); + + return ret; +} + +static int usbhs_remove(struct platform_device *pdev) +{ + struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev); + struct renesas_usbhs_platform_info *info = dev_get_platdata(&pdev->dev); + struct renesas_usbhs_driver_callback *dfunc = &info->driver_callback; + + dev_dbg(&pdev->dev, "usb remove\n"); + + dfunc->notify_hotplug = NULL; + + /* power off */ + if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + usbhsc_power_ctrl(priv, 0); + + pm_runtime_disable(&pdev->dev); + + usbhs_platform_call(priv, hardware_exit, pdev); + usbhs_mod_remove(priv); + usbhs_fifo_remove(priv); + usbhs_pipe_remove(priv); + + return 0; +} + +static int usbhsc_suspend(struct device *dev) +{ + struct usbhs_priv *priv = dev_get_drvdata(dev); + struct usbhs_mod *mod = usbhs_mod_get_current(priv); + + if (mod) { + usbhs_mod_call(priv, stop, priv); + usbhs_mod_change(priv, -1); + } + + if (mod || !usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + usbhsc_power_ctrl(priv, 0); + + return 0; +} + +static int usbhsc_resume(struct device *dev) +{ + struct usbhs_priv *priv = dev_get_drvdata(dev); + struct platform_device *pdev = usbhs_priv_to_pdev(priv); + + if (!usbhsc_flags_has(priv, USBHSF_RUNTIME_PWCTRL)) + usbhsc_power_ctrl(priv, 1); + + usbhs_platform_call(priv, phy_reset, pdev); + + usbhsc_drvcllbck_notify_hotplug(pdev); + + return 0; +} + +static int usbhsc_runtime_nop(struct device *dev) +{ + /* Runtime PM callback shared between ->runtime_suspend() + * and ->runtime_resume(). Simply returns success. + * + * This driver re-initializes all registers after + * pm_runtime_get_sync() anyway so there is no need + * to save and restore registers here. + */ + return 0; +} + +static const struct dev_pm_ops usbhsc_pm_ops = { + .suspend = usbhsc_suspend, + .resume = usbhsc_resume, + .runtime_suspend = usbhsc_runtime_nop, + .runtime_resume = usbhsc_runtime_nop, +}; + +static struct platform_driver renesas_usbhs_driver = { + .driver = { + .name = "renesas_usbhs", + .pm = &usbhsc_pm_ops, + .of_match_table = of_match_ptr(usbhs_of_match), + }, + .probe = usbhs_probe, + .remove = usbhs_remove, +}; + +module_platform_driver(renesas_usbhs_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Renesas USB driver"); +MODULE_AUTHOR("Kuninori Morimoto ");