X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fusb%2Fhost%2Fxhci-mem.c;fp=kernel%2Fdrivers%2Fusb%2Fhost%2Fxhci-mem.c;h=f8336408ef07c4354ad54c43e988b6b43272eea0;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/usb/host/xhci-mem.c b/kernel/drivers/usb/host/xhci-mem.c new file mode 100644 index 000000000..f8336408e --- /dev/null +++ b/kernel/drivers/usb/host/xhci-mem.c @@ -0,0 +1,2548 @@ +/* + * xHCI host controller driver + * + * Copyright (C) 2008 Intel Corp. + * + * Author: Sarah Sharp + * Some code borrowed from the Linux EHCI driver. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY + * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software Foundation, + * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include "xhci.h" +#include "xhci-trace.h" + +/* + * Allocates a generic ring segment from the ring pool, sets the dma address, + * initializes the segment to zero, and sets the private next pointer to NULL. + * + * Section 4.11.1.1: + * "All components of all Command and Transfer TRBs shall be initialized to '0'" + */ +static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, + unsigned int cycle_state, gfp_t flags) +{ + struct xhci_segment *seg; + dma_addr_t dma; + int i; + + seg = kzalloc(sizeof *seg, flags); + if (!seg) + return NULL; + + seg->trbs = dma_pool_alloc(xhci->segment_pool, flags, &dma); + if (!seg->trbs) { + kfree(seg); + return NULL; + } + + memset(seg->trbs, 0, TRB_SEGMENT_SIZE); + /* If the cycle state is 0, set the cycle bit to 1 for all the TRBs */ + if (cycle_state == 0) { + for (i = 0; i < TRBS_PER_SEGMENT; i++) + seg->trbs[i].link.control |= cpu_to_le32(TRB_CYCLE); + } + seg->dma = dma; + seg->next = NULL; + + return seg; +} + +static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg) +{ + if (seg->trbs) { + dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma); + seg->trbs = NULL; + } + kfree(seg); +} + +static void xhci_free_segments_for_ring(struct xhci_hcd *xhci, + struct xhci_segment *first) +{ + struct xhci_segment *seg; + + seg = first->next; + while (seg != first) { + struct xhci_segment *next = seg->next; + xhci_segment_free(xhci, seg); + seg = next; + } + xhci_segment_free(xhci, first); +} + +/* + * Make the prev segment point to the next segment. + * + * Change the last TRB in the prev segment to be a Link TRB which points to the + * DMA address of the next segment. The caller needs to set any Link TRB + * related flags, such as End TRB, Toggle Cycle, and no snoop. + */ +static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev, + struct xhci_segment *next, enum xhci_ring_type type) +{ + u32 val; + + if (!prev || !next) + return; + prev->next = next; + if (type != TYPE_EVENT) { + prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = + cpu_to_le64(next->dma); + + /* Set the last TRB in the segment to have a TRB type ID of Link TRB */ + val = le32_to_cpu(prev->trbs[TRBS_PER_SEGMENT-1].link.control); + val &= ~TRB_TYPE_BITMASK; + val |= TRB_TYPE(TRB_LINK); + /* Always set the chain bit with 0.95 hardware */ + /* Set chain bit for isoc rings on AMD 0.96 host */ + if (xhci_link_trb_quirk(xhci) || + (type == TYPE_ISOC && + (xhci->quirks & XHCI_AMD_0x96_HOST))) + val |= TRB_CHAIN; + prev->trbs[TRBS_PER_SEGMENT-1].link.control = cpu_to_le32(val); + } +} + +/* + * Link the ring to the new segments. + * Set Toggle Cycle for the new ring if needed. + */ +static void xhci_link_rings(struct xhci_hcd *xhci, struct xhci_ring *ring, + struct xhci_segment *first, struct xhci_segment *last, + unsigned int num_segs) +{ + struct xhci_segment *next; + + if (!ring || !first || !last) + return; + + next = ring->enq_seg->next; + xhci_link_segments(xhci, ring->enq_seg, first, ring->type); + xhci_link_segments(xhci, last, next, ring->type); + ring->num_segs += num_segs; + ring->num_trbs_free += (TRBS_PER_SEGMENT - 1) * num_segs; + + if (ring->type != TYPE_EVENT && ring->enq_seg == ring->last_seg) { + ring->last_seg->trbs[TRBS_PER_SEGMENT-1].link.control + &= ~cpu_to_le32(LINK_TOGGLE); + last->trbs[TRBS_PER_SEGMENT-1].link.control + |= cpu_to_le32(LINK_TOGGLE); + ring->last_seg = last; + } +} + +/* + * We need a radix tree for mapping physical addresses of TRBs to which stream + * ID they belong to. We need to do this because the host controller won't tell + * us which stream ring the TRB came from. We could store the stream ID in an + * event data TRB, but that doesn't help us for the cancellation case, since the + * endpoint may stop before it reaches that event data TRB. + * + * The radix tree maps the upper portion of the TRB DMA address to a ring + * segment that has the same upper portion of DMA addresses. For example, say I + * have segments of size 1KB, that are always 1KB aligned. A segment may + * start at 0x10c91000 and end at 0x10c913f0. If I use the upper 10 bits, the + * key to the stream ID is 0x43244. I can use the DMA address of the TRB to + * pass the radix tree a key to get the right stream ID: + * + * 0x10c90fff >> 10 = 0x43243 + * 0x10c912c0 >> 10 = 0x43244 + * 0x10c91400 >> 10 = 0x43245 + * + * Obviously, only those TRBs with DMA addresses that are within the segment + * will make the radix tree return the stream ID for that ring. + * + * Caveats for the radix tree: + * + * The radix tree uses an unsigned long as a key pair. On 32-bit systems, an + * unsigned long will be 32-bits; on a 64-bit system an unsigned long will be + * 64-bits. Since we only request 32-bit DMA addresses, we can use that as the + * key on 32-bit or 64-bit systems (it would also be fine if we asked for 64-bit + * PCI DMA addresses on a 64-bit system). There might be a problem on 32-bit + * extended systems (where the DMA address can be bigger than 32-bits), + * if we allow the PCI dma mask to be bigger than 32-bits. So don't do that. + */ +static int xhci_insert_segment_mapping(struct radix_tree_root *trb_address_map, + struct xhci_ring *ring, + struct xhci_segment *seg, + gfp_t mem_flags) +{ + unsigned long key; + int ret; + + key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT); + /* Skip any segments that were already added. */ + if (radix_tree_lookup(trb_address_map, key)) + return 0; + + ret = radix_tree_maybe_preload(mem_flags); + if (ret) + return ret; + ret = radix_tree_insert(trb_address_map, + key, ring); + radix_tree_preload_end(); + return ret; +} + +static void xhci_remove_segment_mapping(struct radix_tree_root *trb_address_map, + struct xhci_segment *seg) +{ + unsigned long key; + + key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT); + if (radix_tree_lookup(trb_address_map, key)) + radix_tree_delete(trb_address_map, key); +} + +static int xhci_update_stream_segment_mapping( + struct radix_tree_root *trb_address_map, + struct xhci_ring *ring, + struct xhci_segment *first_seg, + struct xhci_segment *last_seg, + gfp_t mem_flags) +{ + struct xhci_segment *seg; + struct xhci_segment *failed_seg; + int ret; + + if (WARN_ON_ONCE(trb_address_map == NULL)) + return 0; + + seg = first_seg; + do { + ret = xhci_insert_segment_mapping(trb_address_map, + ring, seg, mem_flags); + if (ret) + goto remove_streams; + if (seg == last_seg) + return 0; + seg = seg->next; + } while (seg != first_seg); + + return 0; + +remove_streams: + failed_seg = seg; + seg = first_seg; + do { + xhci_remove_segment_mapping(trb_address_map, seg); + if (seg == failed_seg) + return ret; + seg = seg->next; + } while (seg != first_seg); + + return ret; +} + +static void xhci_remove_stream_mapping(struct xhci_ring *ring) +{ + struct xhci_segment *seg; + + if (WARN_ON_ONCE(ring->trb_address_map == NULL)) + return; + + seg = ring->first_seg; + do { + xhci_remove_segment_mapping(ring->trb_address_map, seg); + seg = seg->next; + } while (seg != ring->first_seg); +} + +static int xhci_update_stream_mapping(struct xhci_ring *ring, gfp_t mem_flags) +{ + return xhci_update_stream_segment_mapping(ring->trb_address_map, ring, + ring->first_seg, ring->last_seg, mem_flags); +} + +/* XXX: Do we need the hcd structure in all these functions? */ +void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring) +{ + if (!ring) + return; + + if (ring->first_seg) { + if (ring->type == TYPE_STREAM) + xhci_remove_stream_mapping(ring); + xhci_free_segments_for_ring(xhci, ring->first_seg); + } + + kfree(ring); +} + +static void xhci_initialize_ring_info(struct xhci_ring *ring, + unsigned int cycle_state) +{ + /* The ring is empty, so the enqueue pointer == dequeue pointer */ + ring->enqueue = ring->first_seg->trbs; + ring->enq_seg = ring->first_seg; + ring->dequeue = ring->enqueue; + ring->deq_seg = ring->first_seg; + /* The ring is initialized to 0. The producer must write 1 to the cycle + * bit to handover ownership of the TRB, so PCS = 1. The consumer must + * compare CCS to the cycle bit to check ownership, so CCS = 1. + * + * New rings are initialized with cycle state equal to 1; if we are + * handling ring expansion, set the cycle state equal to the old ring. + */ + ring->cycle_state = cycle_state; + /* Not necessary for new rings, but needed for re-initialized rings */ + ring->enq_updates = 0; + ring->deq_updates = 0; + + /* + * Each segment has a link TRB, and leave an extra TRB for SW + * accounting purpose + */ + ring->num_trbs_free = ring->num_segs * (TRBS_PER_SEGMENT - 1) - 1; +} + +/* Allocate segments and link them for a ring */ +static int xhci_alloc_segments_for_ring(struct xhci_hcd *xhci, + struct xhci_segment **first, struct xhci_segment **last, + unsigned int num_segs, unsigned int cycle_state, + enum xhci_ring_type type, gfp_t flags) +{ + struct xhci_segment *prev; + + prev = xhci_segment_alloc(xhci, cycle_state, flags); + if (!prev) + return -ENOMEM; + num_segs--; + + *first = prev; + while (num_segs > 0) { + struct xhci_segment *next; + + next = xhci_segment_alloc(xhci, cycle_state, flags); + if (!next) { + prev = *first; + while (prev) { + next = prev->next; + xhci_segment_free(xhci, prev); + prev = next; + } + return -ENOMEM; + } + xhci_link_segments(xhci, prev, next, type); + + prev = next; + num_segs--; + } + xhci_link_segments(xhci, prev, *first, type); + *last = prev; + + return 0; +} + +/** + * Create a new ring with zero or more segments. + * + * Link each segment together into a ring. + * Set the end flag and the cycle toggle bit on the last segment. + * See section 4.9.1 and figures 15 and 16. + */ +static struct xhci_ring *xhci_ring_alloc(struct xhci_hcd *xhci, + unsigned int num_segs, unsigned int cycle_state, + enum xhci_ring_type type, gfp_t flags) +{ + struct xhci_ring *ring; + int ret; + + ring = kzalloc(sizeof *(ring), flags); + if (!ring) + return NULL; + + ring->num_segs = num_segs; + INIT_LIST_HEAD(&ring->td_list); + ring->type = type; + if (num_segs == 0) + return ring; + + ret = xhci_alloc_segments_for_ring(xhci, &ring->first_seg, + &ring->last_seg, num_segs, cycle_state, type, flags); + if (ret) + goto fail; + + /* Only event ring does not use link TRB */ + if (type != TYPE_EVENT) { + /* See section 4.9.2.1 and 6.4.4.1 */ + ring->last_seg->trbs[TRBS_PER_SEGMENT - 1].link.control |= + cpu_to_le32(LINK_TOGGLE); + } + xhci_initialize_ring_info(ring, cycle_state); + return ring; + +fail: + kfree(ring); + return NULL; +} + +void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + unsigned int ep_index) +{ + int rings_cached; + + rings_cached = virt_dev->num_rings_cached; + if (rings_cached < XHCI_MAX_RINGS_CACHED) { + virt_dev->ring_cache[rings_cached] = + virt_dev->eps[ep_index].ring; + virt_dev->num_rings_cached++; + xhci_dbg(xhci, "Cached old ring, " + "%d ring%s cached\n", + virt_dev->num_rings_cached, + (virt_dev->num_rings_cached > 1) ? "s" : ""); + } else { + xhci_ring_free(xhci, virt_dev->eps[ep_index].ring); + xhci_dbg(xhci, "Ring cache full (%d rings), " + "freeing ring\n", + virt_dev->num_rings_cached); + } + virt_dev->eps[ep_index].ring = NULL; +} + +/* Zero an endpoint ring (except for link TRBs) and move the enqueue and dequeue + * pointers to the beginning of the ring. + */ +static void xhci_reinit_cached_ring(struct xhci_hcd *xhci, + struct xhci_ring *ring, unsigned int cycle_state, + enum xhci_ring_type type) +{ + struct xhci_segment *seg = ring->first_seg; + int i; + + do { + memset(seg->trbs, 0, + sizeof(union xhci_trb)*TRBS_PER_SEGMENT); + if (cycle_state == 0) { + for (i = 0; i < TRBS_PER_SEGMENT; i++) + seg->trbs[i].link.control |= + cpu_to_le32(TRB_CYCLE); + } + /* All endpoint rings have link TRBs */ + xhci_link_segments(xhci, seg, seg->next, type); + seg = seg->next; + } while (seg != ring->first_seg); + ring->type = type; + xhci_initialize_ring_info(ring, cycle_state); + /* td list should be empty since all URBs have been cancelled, + * but just in case... + */ + INIT_LIST_HEAD(&ring->td_list); +} + +/* + * Expand an existing ring. + * Look for a cached ring or allocate a new ring which has same segment numbers + * and link the two rings. + */ +int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring, + unsigned int num_trbs, gfp_t flags) +{ + struct xhci_segment *first; + struct xhci_segment *last; + unsigned int num_segs; + unsigned int num_segs_needed; + int ret; + + num_segs_needed = (num_trbs + (TRBS_PER_SEGMENT - 1) - 1) / + (TRBS_PER_SEGMENT - 1); + + /* Allocate number of segments we needed, or double the ring size */ + num_segs = ring->num_segs > num_segs_needed ? + ring->num_segs : num_segs_needed; + + ret = xhci_alloc_segments_for_ring(xhci, &first, &last, + num_segs, ring->cycle_state, ring->type, flags); + if (ret) + return -ENOMEM; + + if (ring->type == TYPE_STREAM) + ret = xhci_update_stream_segment_mapping(ring->trb_address_map, + ring, first, last, flags); + if (ret) { + struct xhci_segment *next; + do { + next = first->next; + xhci_segment_free(xhci, first); + if (first == last) + break; + first = next; + } while (true); + return ret; + } + + xhci_link_rings(xhci, ring, first, last, num_segs); + xhci_dbg_trace(xhci, trace_xhci_dbg_ring_expansion, + "ring expansion succeed, now has %d segments", + ring->num_segs); + + return 0; +} + +#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32) + +static struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci, + int type, gfp_t flags) +{ + struct xhci_container_ctx *ctx; + + if ((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT)) + return NULL; + + ctx = kzalloc(sizeof(*ctx), flags); + if (!ctx) + return NULL; + + ctx->type = type; + ctx->size = HCC_64BYTE_CONTEXT(xhci->hcc_params) ? 2048 : 1024; + if (type == XHCI_CTX_TYPE_INPUT) + ctx->size += CTX_SIZE(xhci->hcc_params); + + ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma); + if (!ctx->bytes) { + kfree(ctx); + return NULL; + } + memset(ctx->bytes, 0, ctx->size); + return ctx; +} + +static void xhci_free_container_ctx(struct xhci_hcd *xhci, + struct xhci_container_ctx *ctx) +{ + if (!ctx) + return; + dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma); + kfree(ctx); +} + +struct xhci_input_control_ctx *xhci_get_input_control_ctx( + struct xhci_container_ctx *ctx) +{ + if (ctx->type != XHCI_CTX_TYPE_INPUT) + return NULL; + + return (struct xhci_input_control_ctx *)ctx->bytes; +} + +struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, + struct xhci_container_ctx *ctx) +{ + if (ctx->type == XHCI_CTX_TYPE_DEVICE) + return (struct xhci_slot_ctx *)ctx->bytes; + + return (struct xhci_slot_ctx *) + (ctx->bytes + CTX_SIZE(xhci->hcc_params)); +} + +struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, + struct xhci_container_ctx *ctx, + unsigned int ep_index) +{ + /* increment ep index by offset of start of ep ctx array */ + ep_index++; + if (ctx->type == XHCI_CTX_TYPE_INPUT) + ep_index++; + + return (struct xhci_ep_ctx *) + (ctx->bytes + (ep_index * CTX_SIZE(xhci->hcc_params))); +} + + +/***************** Streams structures manipulation *************************/ + +static void xhci_free_stream_ctx(struct xhci_hcd *xhci, + unsigned int num_stream_ctxs, + struct xhci_stream_ctx *stream_ctx, dma_addr_t dma) +{ + struct device *dev = xhci_to_hcd(xhci)->self.controller; + size_t size = sizeof(struct xhci_stream_ctx) * num_stream_ctxs; + + if (size > MEDIUM_STREAM_ARRAY_SIZE) + dma_free_coherent(dev, size, + stream_ctx, dma); + else if (size <= SMALL_STREAM_ARRAY_SIZE) + return dma_pool_free(xhci->small_streams_pool, + stream_ctx, dma); + else + return dma_pool_free(xhci->medium_streams_pool, + stream_ctx, dma); +} + +/* + * The stream context array for each endpoint with bulk streams enabled can + * vary in size, based on: + * - how many streams the endpoint supports, + * - the maximum primary stream array size the host controller supports, + * - and how many streams the device driver asks for. + * + * The stream context array must be a power of 2, and can be as small as + * 64 bytes or as large as 1MB. + */ +static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, + unsigned int num_stream_ctxs, dma_addr_t *dma, + gfp_t mem_flags) +{ + struct device *dev = xhci_to_hcd(xhci)->self.controller; + size_t size = sizeof(struct xhci_stream_ctx) * num_stream_ctxs; + + if (size > MEDIUM_STREAM_ARRAY_SIZE) + return dma_alloc_coherent(dev, size, + dma, mem_flags); + else if (size <= SMALL_STREAM_ARRAY_SIZE) + return dma_pool_alloc(xhci->small_streams_pool, + mem_flags, dma); + else + return dma_pool_alloc(xhci->medium_streams_pool, + mem_flags, dma); +} + +struct xhci_ring *xhci_dma_to_transfer_ring( + struct xhci_virt_ep *ep, + u64 address) +{ + if (ep->ep_state & EP_HAS_STREAMS) + return radix_tree_lookup(&ep->stream_info->trb_address_map, + address >> TRB_SEGMENT_SHIFT); + return ep->ring; +} + +struct xhci_ring *xhci_stream_id_to_ring( + struct xhci_virt_device *dev, + unsigned int ep_index, + unsigned int stream_id) +{ + struct xhci_virt_ep *ep = &dev->eps[ep_index]; + + if (stream_id == 0) + return ep->ring; + if (!ep->stream_info) + return NULL; + + if (stream_id > ep->stream_info->num_streams) + return NULL; + return ep->stream_info->stream_rings[stream_id]; +} + +/* + * Change an endpoint's internal structure so it supports stream IDs. The + * number of requested streams includes stream 0, which cannot be used by device + * drivers. + * + * The number of stream contexts in the stream context array may be bigger than + * the number of streams the driver wants to use. This is because the number of + * stream context array entries must be a power of two. + */ +struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, + unsigned int num_stream_ctxs, + unsigned int num_streams, gfp_t mem_flags) +{ + struct xhci_stream_info *stream_info; + u32 cur_stream; + struct xhci_ring *cur_ring; + u64 addr; + int ret; + + xhci_dbg(xhci, "Allocating %u streams and %u " + "stream context array entries.\n", + num_streams, num_stream_ctxs); + if (xhci->cmd_ring_reserved_trbs == MAX_RSVD_CMD_TRBS) { + xhci_dbg(xhci, "Command ring has no reserved TRBs available\n"); + return NULL; + } + xhci->cmd_ring_reserved_trbs++; + + stream_info = kzalloc(sizeof(struct xhci_stream_info), mem_flags); + if (!stream_info) + goto cleanup_trbs; + + stream_info->num_streams = num_streams; + stream_info->num_stream_ctxs = num_stream_ctxs; + + /* Initialize the array of virtual pointers to stream rings. */ + stream_info->stream_rings = kzalloc( + sizeof(struct xhci_ring *)*num_streams, + mem_flags); + if (!stream_info->stream_rings) + goto cleanup_info; + + /* Initialize the array of DMA addresses for stream rings for the HW. */ + stream_info->stream_ctx_array = xhci_alloc_stream_ctx(xhci, + num_stream_ctxs, &stream_info->ctx_array_dma, + mem_flags); + if (!stream_info->stream_ctx_array) + goto cleanup_ctx; + memset(stream_info->stream_ctx_array, 0, + sizeof(struct xhci_stream_ctx)*num_stream_ctxs); + + /* Allocate everything needed to free the stream rings later */ + stream_info->free_streams_command = + xhci_alloc_command(xhci, true, true, mem_flags); + if (!stream_info->free_streams_command) + goto cleanup_ctx; + + INIT_RADIX_TREE(&stream_info->trb_address_map, GFP_ATOMIC); + + /* Allocate rings for all the streams that the driver will use, + * and add their segment DMA addresses to the radix tree. + * Stream 0 is reserved. + */ + for (cur_stream = 1; cur_stream < num_streams; cur_stream++) { + stream_info->stream_rings[cur_stream] = + xhci_ring_alloc(xhci, 2, 1, TYPE_STREAM, mem_flags); + cur_ring = stream_info->stream_rings[cur_stream]; + if (!cur_ring) + goto cleanup_rings; + cur_ring->stream_id = cur_stream; + cur_ring->trb_address_map = &stream_info->trb_address_map; + /* Set deq ptr, cycle bit, and stream context type */ + addr = cur_ring->first_seg->dma | + SCT_FOR_CTX(SCT_PRI_TR) | + cur_ring->cycle_state; + stream_info->stream_ctx_array[cur_stream].stream_ring = + cpu_to_le64(addr); + xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n", + cur_stream, (unsigned long long) addr); + + ret = xhci_update_stream_mapping(cur_ring, mem_flags); + if (ret) { + xhci_ring_free(xhci, cur_ring); + stream_info->stream_rings[cur_stream] = NULL; + goto cleanup_rings; + } + } + /* Leave the other unused stream ring pointers in the stream context + * array initialized to zero. This will cause the xHC to give us an + * error if the device asks for a stream ID we don't have setup (if it + * was any other way, the host controller would assume the ring is + * "empty" and wait forever for data to be queued to that stream ID). + */ + + return stream_info; + +cleanup_rings: + for (cur_stream = 1; cur_stream < num_streams; cur_stream++) { + cur_ring = stream_info->stream_rings[cur_stream]; + if (cur_ring) { + xhci_ring_free(xhci, cur_ring); + stream_info->stream_rings[cur_stream] = NULL; + } + } + xhci_free_command(xhci, stream_info->free_streams_command); +cleanup_ctx: + kfree(stream_info->stream_rings); +cleanup_info: + kfree(stream_info); +cleanup_trbs: + xhci->cmd_ring_reserved_trbs--; + return NULL; +} +/* + * Sets the MaxPStreams field and the Linear Stream Array field. + * Sets the dequeue pointer to the stream context array. + */ +void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci, + struct xhci_ep_ctx *ep_ctx, + struct xhci_stream_info *stream_info) +{ + u32 max_primary_streams; + /* MaxPStreams is the number of stream context array entries, not the + * number we're actually using. Must be in 2^(MaxPstreams + 1) format. + * fls(0) = 0, fls(0x1) = 1, fls(0x10) = 2, fls(0x100) = 3, etc. + */ + max_primary_streams = fls(stream_info->num_stream_ctxs) - 2; + xhci_dbg_trace(xhci, trace_xhci_dbg_context_change, + "Setting number of stream ctx array entries to %u", + 1 << (max_primary_streams + 1)); + ep_ctx->ep_info &= cpu_to_le32(~EP_MAXPSTREAMS_MASK); + ep_ctx->ep_info |= cpu_to_le32(EP_MAXPSTREAMS(max_primary_streams) + | EP_HAS_LSA); + ep_ctx->deq = cpu_to_le64(stream_info->ctx_array_dma); +} + +/* + * Sets the MaxPStreams field and the Linear Stream Array field to 0. + * Reinstalls the "normal" endpoint ring (at its previous dequeue mark, + * not at the beginning of the ring). + */ +void xhci_setup_no_streams_ep_input_ctx(struct xhci_ep_ctx *ep_ctx, + struct xhci_virt_ep *ep) +{ + dma_addr_t addr; + ep_ctx->ep_info &= cpu_to_le32(~(EP_MAXPSTREAMS_MASK | EP_HAS_LSA)); + addr = xhci_trb_virt_to_dma(ep->ring->deq_seg, ep->ring->dequeue); + ep_ctx->deq = cpu_to_le64(addr | ep->ring->cycle_state); +} + +/* Frees all stream contexts associated with the endpoint, + * + * Caller should fix the endpoint context streams fields. + */ +void xhci_free_stream_info(struct xhci_hcd *xhci, + struct xhci_stream_info *stream_info) +{ + int cur_stream; + struct xhci_ring *cur_ring; + + if (!stream_info) + return; + + for (cur_stream = 1; cur_stream < stream_info->num_streams; + cur_stream++) { + cur_ring = stream_info->stream_rings[cur_stream]; + if (cur_ring) { + xhci_ring_free(xhci, cur_ring); + stream_info->stream_rings[cur_stream] = NULL; + } + } + xhci_free_command(xhci, stream_info->free_streams_command); + xhci->cmd_ring_reserved_trbs--; + if (stream_info->stream_ctx_array) + xhci_free_stream_ctx(xhci, + stream_info->num_stream_ctxs, + stream_info->stream_ctx_array, + stream_info->ctx_array_dma); + + kfree(stream_info->stream_rings); + kfree(stream_info); +} + + +/***************** Device context manipulation *************************/ + +static void xhci_init_endpoint_timer(struct xhci_hcd *xhci, + struct xhci_virt_ep *ep) +{ + setup_timer(&ep->stop_cmd_timer, xhci_stop_endpoint_command_watchdog, + (unsigned long)ep); + ep->xhci = xhci; +} + +static void xhci_free_tt_info(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + int slot_id) +{ + struct list_head *tt_list_head; + struct xhci_tt_bw_info *tt_info, *next; + bool slot_found = false; + + /* If the device never made it past the Set Address stage, + * it may not have the real_port set correctly. + */ + if (virt_dev->real_port == 0 || + virt_dev->real_port > HCS_MAX_PORTS(xhci->hcs_params1)) { + xhci_dbg(xhci, "Bad real port.\n"); + return; + } + + tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts); + list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) { + /* Multi-TT hubs will have more than one entry */ + if (tt_info->slot_id == slot_id) { + slot_found = true; + list_del(&tt_info->tt_list); + kfree(tt_info); + } else if (slot_found) { + break; + } + } +} + +int xhci_alloc_tt_info(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + struct usb_device *hdev, + struct usb_tt *tt, gfp_t mem_flags) +{ + struct xhci_tt_bw_info *tt_info; + unsigned int num_ports; + int i, j; + + if (!tt->multi) + num_ports = 1; + else + num_ports = hdev->maxchild; + + for (i = 0; i < num_ports; i++, tt_info++) { + struct xhci_interval_bw_table *bw_table; + + tt_info = kzalloc(sizeof(*tt_info), mem_flags); + if (!tt_info) + goto free_tts; + INIT_LIST_HEAD(&tt_info->tt_list); + list_add(&tt_info->tt_list, + &xhci->rh_bw[virt_dev->real_port - 1].tts); + tt_info->slot_id = virt_dev->udev->slot_id; + if (tt->multi) + tt_info->ttport = i+1; + bw_table = &tt_info->bw_table; + for (j = 0; j < XHCI_MAX_INTERVAL; j++) + INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints); + } + return 0; + +free_tts: + xhci_free_tt_info(xhci, virt_dev, virt_dev->udev->slot_id); + return -ENOMEM; +} + + +/* All the xhci_tds in the ring's TD list should be freed at this point. + * Should be called with xhci->lock held if there is any chance the TT lists + * will be manipulated by the configure endpoint, allocate device, or update + * hub functions while this function is removing the TT entries from the list. + */ +void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) +{ + struct xhci_virt_device *dev; + int i; + int old_active_eps = 0; + + /* Slot ID 0 is reserved */ + if (slot_id == 0 || !xhci->devs[slot_id]) + return; + + dev = xhci->devs[slot_id]; + xhci->dcbaa->dev_context_ptrs[slot_id] = 0; + if (!dev) + return; + + if (dev->tt_info) + old_active_eps = dev->tt_info->active_eps; + + for (i = 0; i < 31; ++i) { + if (dev->eps[i].ring) + xhci_ring_free(xhci, dev->eps[i].ring); + if (dev->eps[i].stream_info) + xhci_free_stream_info(xhci, + dev->eps[i].stream_info); + /* Endpoints on the TT/root port lists should have been removed + * when usb_disable_device() was called for the device. + * We can't drop them anyway, because the udev might have gone + * away by this point, and we can't tell what speed it was. + */ + if (!list_empty(&dev->eps[i].bw_endpoint_list)) + xhci_warn(xhci, "Slot %u endpoint %u " + "not removed from BW list!\n", + slot_id, i); + } + /* If this is a hub, free the TT(s) from the TT list */ + xhci_free_tt_info(xhci, dev, slot_id); + /* If necessary, update the number of active TTs on this root port */ + xhci_update_tt_active_eps(xhci, dev, old_active_eps); + + if (dev->ring_cache) { + for (i = 0; i < dev->num_rings_cached; i++) + xhci_ring_free(xhci, dev->ring_cache[i]); + kfree(dev->ring_cache); + } + + if (dev->in_ctx) + xhci_free_container_ctx(xhci, dev->in_ctx); + if (dev->out_ctx) + xhci_free_container_ctx(xhci, dev->out_ctx); + + kfree(xhci->devs[slot_id]); + xhci->devs[slot_id] = NULL; +} + +int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, + struct usb_device *udev, gfp_t flags) +{ + struct xhci_virt_device *dev; + int i; + + /* Slot ID 0 is reserved */ + if (slot_id == 0 || xhci->devs[slot_id]) { + xhci_warn(xhci, "Bad Slot ID %d\n", slot_id); + return 0; + } + + xhci->devs[slot_id] = kzalloc(sizeof(*xhci->devs[slot_id]), flags); + if (!xhci->devs[slot_id]) + return 0; + dev = xhci->devs[slot_id]; + + /* Allocate the (output) device context that will be used in the HC. */ + dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags); + if (!dev->out_ctx) + goto fail; + + xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id, + (unsigned long long)dev->out_ctx->dma); + + /* Allocate the (input) device context for address device command */ + dev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, flags); + if (!dev->in_ctx) + goto fail; + + xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id, + (unsigned long long)dev->in_ctx->dma); + + /* Initialize the cancellation list and watchdog timers for each ep */ + for (i = 0; i < 31; i++) { + xhci_init_endpoint_timer(xhci, &dev->eps[i]); + INIT_LIST_HEAD(&dev->eps[i].cancelled_td_list); + INIT_LIST_HEAD(&dev->eps[i].bw_endpoint_list); + } + + /* Allocate endpoint 0 ring */ + dev->eps[0].ring = xhci_ring_alloc(xhci, 2, 1, TYPE_CTRL, flags); + if (!dev->eps[0].ring) + goto fail; + + /* Allocate pointers to the ring cache */ + dev->ring_cache = kzalloc( + sizeof(struct xhci_ring *)*XHCI_MAX_RINGS_CACHED, + flags); + if (!dev->ring_cache) + goto fail; + dev->num_rings_cached = 0; + + init_completion(&dev->cmd_completion); + dev->udev = udev; + + /* Point to output device context in dcbaa. */ + xhci->dcbaa->dev_context_ptrs[slot_id] = cpu_to_le64(dev->out_ctx->dma); + xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n", + slot_id, + &xhci->dcbaa->dev_context_ptrs[slot_id], + le64_to_cpu(xhci->dcbaa->dev_context_ptrs[slot_id])); + + return 1; +fail: + xhci_free_virt_device(xhci, slot_id); + return 0; +} + +void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, + struct usb_device *udev) +{ + struct xhci_virt_device *virt_dev; + struct xhci_ep_ctx *ep0_ctx; + struct xhci_ring *ep_ring; + + virt_dev = xhci->devs[udev->slot_id]; + ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0); + ep_ring = virt_dev->eps[0].ring; + /* + * FIXME we don't keep track of the dequeue pointer very well after a + * Set TR dequeue pointer, so we're setting the dequeue pointer of the + * host to our enqueue pointer. This should only be called after a + * configured device has reset, so all control transfers should have + * been completed or cancelled before the reset. + */ + ep0_ctx->deq = cpu_to_le64(xhci_trb_virt_to_dma(ep_ring->enq_seg, + ep_ring->enqueue) + | ep_ring->cycle_state); +} + +/* + * The xHCI roothub may have ports of differing speeds in any order in the port + * status registers. xhci->port_array provides an array of the port speed for + * each offset into the port status registers. + * + * The xHCI hardware wants to know the roothub port number that the USB device + * is attached to (or the roothub port its ancestor hub is attached to). All we + * know is the index of that port under either the USB 2.0 or the USB 3.0 + * roothub, but that doesn't give us the real index into the HW port status + * registers. Call xhci_find_raw_port_number() to get real index. + */ +static u32 xhci_find_real_port_number(struct xhci_hcd *xhci, + struct usb_device *udev) +{ + struct usb_device *top_dev; + struct usb_hcd *hcd; + + if (udev->speed == USB_SPEED_SUPER) + hcd = xhci->shared_hcd; + else + hcd = xhci->main_hcd; + + for (top_dev = udev; top_dev->parent && top_dev->parent->parent; + top_dev = top_dev->parent) + /* Found device below root hub */; + + return xhci_find_raw_port_number(hcd, top_dev->portnum); +} + +/* Setup an xHCI virtual device for a Set Address command */ +int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev) +{ + struct xhci_virt_device *dev; + struct xhci_ep_ctx *ep0_ctx; + struct xhci_slot_ctx *slot_ctx; + u32 port_num; + u32 max_packets; + struct usb_device *top_dev; + + dev = xhci->devs[udev->slot_id]; + /* Slot ID 0 is reserved */ + if (udev->slot_id == 0 || !dev) { + xhci_warn(xhci, "Slot ID %d is not assigned to this device\n", + udev->slot_id); + return -EINVAL; + } + ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0); + slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx); + + /* 3) Only the control endpoint is valid - one endpoint context */ + slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | udev->route); + switch (udev->speed) { + case USB_SPEED_SUPER: + slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_SS); + max_packets = MAX_PACKET(512); + break; + case USB_SPEED_HIGH: + slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_HS); + max_packets = MAX_PACKET(64); + break; + /* USB core guesses at a 64-byte max packet first for FS devices */ + case USB_SPEED_FULL: + slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_FS); + max_packets = MAX_PACKET(64); + break; + case USB_SPEED_LOW: + slot_ctx->dev_info |= cpu_to_le32(SLOT_SPEED_LS); + max_packets = MAX_PACKET(8); + break; + case USB_SPEED_WIRELESS: + xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n"); + return -EINVAL; + break; + default: + /* Speed was set earlier, this shouldn't happen. */ + return -EINVAL; + } + /* Find the root hub port this device is under */ + port_num = xhci_find_real_port_number(xhci, udev); + if (!port_num) + return -EINVAL; + slot_ctx->dev_info2 |= cpu_to_le32(ROOT_HUB_PORT(port_num)); + /* Set the port number in the virtual_device to the faked port number */ + for (top_dev = udev; top_dev->parent && top_dev->parent->parent; + top_dev = top_dev->parent) + /* Found device below root hub */; + dev->fake_port = top_dev->portnum; + dev->real_port = port_num; + xhci_dbg(xhci, "Set root hub portnum to %d\n", port_num); + xhci_dbg(xhci, "Set fake root hub portnum to %d\n", dev->fake_port); + + /* Find the right bandwidth table that this device will be a part of. + * If this is a full speed device attached directly to a root port (or a + * decendent of one), it counts as a primary bandwidth domain, not a + * secondary bandwidth domain under a TT. An xhci_tt_info structure + * will never be created for the HS root hub. + */ + if (!udev->tt || !udev->tt->hub->parent) { + dev->bw_table = &xhci->rh_bw[port_num - 1].bw_table; + } else { + struct xhci_root_port_bw_info *rh_bw; + struct xhci_tt_bw_info *tt_bw; + + rh_bw = &xhci->rh_bw[port_num - 1]; + /* Find the right TT. */ + list_for_each_entry(tt_bw, &rh_bw->tts, tt_list) { + if (tt_bw->slot_id != udev->tt->hub->slot_id) + continue; + + if (!dev->udev->tt->multi || + (udev->tt->multi && + tt_bw->ttport == dev->udev->ttport)) { + dev->bw_table = &tt_bw->bw_table; + dev->tt_info = tt_bw; + break; + } + } + if (!dev->tt_info) + xhci_warn(xhci, "WARN: Didn't find a matching TT\n"); + } + + /* Is this a LS/FS device under an external HS hub? */ + if (udev->tt && udev->tt->hub->parent) { + slot_ctx->tt_info = cpu_to_le32(udev->tt->hub->slot_id | + (udev->ttport << 8)); + if (udev->tt->multi) + slot_ctx->dev_info |= cpu_to_le32(DEV_MTT); + } + xhci_dbg(xhci, "udev->tt = %p\n", udev->tt); + xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport); + + /* Step 4 - ring already allocated */ + /* Step 5 */ + ep0_ctx->ep_info2 = cpu_to_le32(EP_TYPE(CTRL_EP)); + + /* EP 0 can handle "burst" sizes of 1, so Max Burst Size field is 0 */ + ep0_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(0) | ERROR_COUNT(3) | + max_packets); + + ep0_ctx->deq = cpu_to_le64(dev->eps[0].ring->first_seg->dma | + dev->eps[0].ring->cycle_state); + + /* Steps 7 and 8 were done in xhci_alloc_virt_device() */ + + return 0; +} + +/* + * Convert interval expressed as 2^(bInterval - 1) == interval into + * straight exponent value 2^n == interval. + * + */ +static unsigned int xhci_parse_exponent_interval(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + unsigned int interval; + + interval = clamp_val(ep->desc.bInterval, 1, 16) - 1; + if (interval != ep->desc.bInterval - 1) + dev_warn(&udev->dev, + "ep %#x - rounding interval to %d %sframes\n", + ep->desc.bEndpointAddress, + 1 << interval, + udev->speed == USB_SPEED_FULL ? "" : "micro"); + + if (udev->speed == USB_SPEED_FULL) { + /* + * Full speed isoc endpoints specify interval in frames, + * not microframes. We are using microframes everywhere, + * so adjust accordingly. + */ + interval += 3; /* 1 frame = 2^3 uframes */ + } + + return interval; +} + +/* + * Convert bInterval expressed in microframes (in 1-255 range) to exponent of + * microframes, rounded down to nearest power of 2. + */ +static unsigned int xhci_microframes_to_exponent(struct usb_device *udev, + struct usb_host_endpoint *ep, unsigned int desc_interval, + unsigned int min_exponent, unsigned int max_exponent) +{ + unsigned int interval; + + interval = fls(desc_interval) - 1; + interval = clamp_val(interval, min_exponent, max_exponent); + if ((1 << interval) != desc_interval) + dev_warn(&udev->dev, + "ep %#x - rounding interval to %d microframes, ep desc says %d microframes\n", + ep->desc.bEndpointAddress, + 1 << interval, + desc_interval); + + return interval; +} + +static unsigned int xhci_parse_microframe_interval(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + if (ep->desc.bInterval == 0) + return 0; + return xhci_microframes_to_exponent(udev, ep, + ep->desc.bInterval, 0, 15); +} + + +static unsigned int xhci_parse_frame_interval(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + return xhci_microframes_to_exponent(udev, ep, + ep->desc.bInterval * 8, 3, 10); +} + +/* Return the polling or NAK interval. + * + * The polling interval is expressed in "microframes". If xHCI's Interval field + * is set to N, it will service the endpoint every 2^(Interval)*125us. + * + * The NAK interval is one NAK per 1 to 255 microframes, or no NAKs if interval + * is set to 0. + */ +static unsigned int xhci_get_endpoint_interval(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + unsigned int interval = 0; + + switch (udev->speed) { + case USB_SPEED_HIGH: + /* Max NAK rate */ + if (usb_endpoint_xfer_control(&ep->desc) || + usb_endpoint_xfer_bulk(&ep->desc)) { + interval = xhci_parse_microframe_interval(udev, ep); + break; + } + /* Fall through - SS and HS isoc/int have same decoding */ + + case USB_SPEED_SUPER: + if (usb_endpoint_xfer_int(&ep->desc) || + usb_endpoint_xfer_isoc(&ep->desc)) { + interval = xhci_parse_exponent_interval(udev, ep); + } + break; + + case USB_SPEED_FULL: + if (usb_endpoint_xfer_isoc(&ep->desc)) { + interval = xhci_parse_exponent_interval(udev, ep); + break; + } + /* + * Fall through for interrupt endpoint interval decoding + * since it uses the same rules as low speed interrupt + * endpoints. + */ + + case USB_SPEED_LOW: + if (usb_endpoint_xfer_int(&ep->desc) || + usb_endpoint_xfer_isoc(&ep->desc)) { + + interval = xhci_parse_frame_interval(udev, ep); + } + break; + + default: + BUG(); + } + return EP_INTERVAL(interval); +} + +/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps. + * High speed endpoint descriptors can define "the number of additional + * transaction opportunities per microframe", but that goes in the Max Burst + * endpoint context field. + */ +static u32 xhci_get_endpoint_mult(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + if (udev->speed != USB_SPEED_SUPER || + !usb_endpoint_xfer_isoc(&ep->desc)) + return 0; + return ep->ss_ep_comp.bmAttributes; +} + +static u32 xhci_get_endpoint_type(struct usb_host_endpoint *ep) +{ + int in; + u32 type; + + in = usb_endpoint_dir_in(&ep->desc); + if (usb_endpoint_xfer_control(&ep->desc)) { + type = EP_TYPE(CTRL_EP); + } else if (usb_endpoint_xfer_bulk(&ep->desc)) { + if (in) + type = EP_TYPE(BULK_IN_EP); + else + type = EP_TYPE(BULK_OUT_EP); + } else if (usb_endpoint_xfer_isoc(&ep->desc)) { + if (in) + type = EP_TYPE(ISOC_IN_EP); + else + type = EP_TYPE(ISOC_OUT_EP); + } else if (usb_endpoint_xfer_int(&ep->desc)) { + if (in) + type = EP_TYPE(INT_IN_EP); + else + type = EP_TYPE(INT_OUT_EP); + } else { + type = 0; + } + return type; +} + +/* Return the maximum endpoint service interval time (ESIT) payload. + * Basically, this is the maxpacket size, multiplied by the burst size + * and mult size. + */ +static u32 xhci_get_max_esit_payload(struct usb_device *udev, + struct usb_host_endpoint *ep) +{ + int max_burst; + int max_packet; + + /* Only applies for interrupt or isochronous endpoints */ + if (usb_endpoint_xfer_control(&ep->desc) || + usb_endpoint_xfer_bulk(&ep->desc)) + return 0; + + if (udev->speed == USB_SPEED_SUPER) + return le16_to_cpu(ep->ss_ep_comp.wBytesPerInterval); + + max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)); + max_burst = (usb_endpoint_maxp(&ep->desc) & 0x1800) >> 11; + /* A 0 in max burst means 1 transfer per ESIT */ + return max_packet * (max_burst + 1); +} + +/* Set up an endpoint with one ring segment. Do not allocate stream rings. + * Drivers will have to call usb_alloc_streams() to do that. + */ +int xhci_endpoint_init(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + struct usb_device *udev, + struct usb_host_endpoint *ep, + gfp_t mem_flags) +{ + unsigned int ep_index; + struct xhci_ep_ctx *ep_ctx; + struct xhci_ring *ep_ring; + unsigned int max_packet; + unsigned int max_burst; + enum xhci_ring_type type; + u32 max_esit_payload; + u32 endpoint_type; + + ep_index = xhci_get_endpoint_index(&ep->desc); + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); + + endpoint_type = xhci_get_endpoint_type(ep); + if (!endpoint_type) + return -EINVAL; + ep_ctx->ep_info2 = cpu_to_le32(endpoint_type); + + type = usb_endpoint_type(&ep->desc); + /* Set up the endpoint ring */ + virt_dev->eps[ep_index].new_ring = + xhci_ring_alloc(xhci, 2, 1, type, mem_flags); + if (!virt_dev->eps[ep_index].new_ring) { + /* Attempt to use the ring cache */ + if (virt_dev->num_rings_cached == 0) + return -ENOMEM; + virt_dev->eps[ep_index].new_ring = + virt_dev->ring_cache[virt_dev->num_rings_cached]; + virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL; + virt_dev->num_rings_cached--; + xhci_reinit_cached_ring(xhci, virt_dev->eps[ep_index].new_ring, + 1, type); + } + virt_dev->eps[ep_index].skip = false; + ep_ring = virt_dev->eps[ep_index].new_ring; + ep_ctx->deq = cpu_to_le64(ep_ring->first_seg->dma | ep_ring->cycle_state); + + ep_ctx->ep_info = cpu_to_le32(xhci_get_endpoint_interval(udev, ep) + | EP_MULT(xhci_get_endpoint_mult(udev, ep))); + + /* FIXME dig Mult and streams info out of ep companion desc */ + + /* Allow 3 retries for everything but isoc; + * CErr shall be set to 0 for Isoch endpoints. + */ + if (!usb_endpoint_xfer_isoc(&ep->desc)) + ep_ctx->ep_info2 |= cpu_to_le32(ERROR_COUNT(3)); + else + ep_ctx->ep_info2 |= cpu_to_le32(ERROR_COUNT(0)); + + /* Set the max packet size and max burst */ + max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)); + max_burst = 0; + switch (udev->speed) { + case USB_SPEED_SUPER: + /* dig out max burst from ep companion desc */ + max_burst = ep->ss_ep_comp.bMaxBurst; + break; + case USB_SPEED_HIGH: + /* Some devices get this wrong */ + if (usb_endpoint_xfer_bulk(&ep->desc)) + max_packet = 512; + /* bits 11:12 specify the number of additional transaction + * opportunities per microframe (USB 2.0, section 9.6.6) + */ + if (usb_endpoint_xfer_isoc(&ep->desc) || + usb_endpoint_xfer_int(&ep->desc)) { + max_burst = (usb_endpoint_maxp(&ep->desc) + & 0x1800) >> 11; + } + break; + case USB_SPEED_FULL: + case USB_SPEED_LOW: + break; + default: + BUG(); + } + ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) | + MAX_BURST(max_burst)); + max_esit_payload = xhci_get_max_esit_payload(udev, ep); + ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload)); + + /* + * XXX no idea how to calculate the average TRB buffer length for bulk + * endpoints, as the driver gives us no clue how big each scatter gather + * list entry (or buffer) is going to be. + * + * For isochronous and interrupt endpoints, we set it to the max + * available, until we have new API in the USB core to allow drivers to + * declare how much bandwidth they actually need. + * + * Normally, it would be calculated by taking the total of the buffer + * lengths in the TD and then dividing by the number of TRBs in a TD, + * including link TRBs, No-op TRBs, and Event data TRBs. Since we don't + * use Event Data TRBs, and we don't chain in a link TRB on short + * transfers, we're basically dividing by 1. + * + * xHCI 1.0 specification indicates that the Average TRB Length should + * be set to 8 for control endpoints. + */ + if (usb_endpoint_xfer_control(&ep->desc) && xhci->hci_version == 0x100) + ep_ctx->tx_info |= cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(8)); + else + ep_ctx->tx_info |= + cpu_to_le32(AVG_TRB_LENGTH_FOR_EP(max_esit_payload)); + + /* FIXME Debug endpoint context */ + return 0; +} + +void xhci_endpoint_zero(struct xhci_hcd *xhci, + struct xhci_virt_device *virt_dev, + struct usb_host_endpoint *ep) +{ + unsigned int ep_index; + struct xhci_ep_ctx *ep_ctx; + + ep_index = xhci_get_endpoint_index(&ep->desc); + ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); + + ep_ctx->ep_info = 0; + ep_ctx->ep_info2 = 0; + ep_ctx->deq = 0; + ep_ctx->tx_info = 0; + /* Don't free the endpoint ring until the set interface or configuration + * request succeeds. + */ +} + +void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info) +{ + bw_info->ep_interval = 0; + bw_info->mult = 0; + bw_info->num_packets = 0; + bw_info->max_packet_size = 0; + bw_info->type = 0; + bw_info->max_esit_payload = 0; +} + +void xhci_update_bw_info(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx, + struct xhci_input_control_ctx *ctrl_ctx, + struct xhci_virt_device *virt_dev) +{ + struct xhci_bw_info *bw_info; + struct xhci_ep_ctx *ep_ctx; + unsigned int ep_type; + int i; + + for (i = 1; i < 31; ++i) { + bw_info = &virt_dev->eps[i].bw_info; + + /* We can't tell what endpoint type is being dropped, but + * unconditionally clearing the bandwidth info for non-periodic + * endpoints should be harmless because the info will never be + * set in the first place. + */ + if (!EP_IS_ADDED(ctrl_ctx, i) && EP_IS_DROPPED(ctrl_ctx, i)) { + /* Dropped endpoint */ + xhci_clear_endpoint_bw_info(bw_info); + continue; + } + + if (EP_IS_ADDED(ctrl_ctx, i)) { + ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, i); + ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2)); + + /* Ignore non-periodic endpoints */ + if (ep_type != ISOC_OUT_EP && ep_type != INT_OUT_EP && + ep_type != ISOC_IN_EP && + ep_type != INT_IN_EP) + continue; + + /* Added or changed endpoint */ + bw_info->ep_interval = CTX_TO_EP_INTERVAL( + le32_to_cpu(ep_ctx->ep_info)); + /* Number of packets and mult are zero-based in the + * input context, but we want one-based for the + * interval table. + */ + bw_info->mult = CTX_TO_EP_MULT( + le32_to_cpu(ep_ctx->ep_info)) + 1; + bw_info->num_packets = CTX_TO_MAX_BURST( + le32_to_cpu(ep_ctx->ep_info2)) + 1; + bw_info->max_packet_size = MAX_PACKET_DECODED( + le32_to_cpu(ep_ctx->ep_info2)); + bw_info->type = ep_type; + bw_info->max_esit_payload = CTX_TO_MAX_ESIT_PAYLOAD( + le32_to_cpu(ep_ctx->tx_info)); + } + } +} + +/* Copy output xhci_ep_ctx to the input xhci_ep_ctx copy. + * Useful when you want to change one particular aspect of the endpoint and then + * issue a configure endpoint command. + */ +void xhci_endpoint_copy(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx, + struct xhci_container_ctx *out_ctx, + unsigned int ep_index) +{ + struct xhci_ep_ctx *out_ep_ctx; + struct xhci_ep_ctx *in_ep_ctx; + + out_ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index); + in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); + + in_ep_ctx->ep_info = out_ep_ctx->ep_info; + in_ep_ctx->ep_info2 = out_ep_ctx->ep_info2; + in_ep_ctx->deq = out_ep_ctx->deq; + in_ep_ctx->tx_info = out_ep_ctx->tx_info; +} + +/* Copy output xhci_slot_ctx to the input xhci_slot_ctx. + * Useful when you want to change one particular aspect of the endpoint and then + * issue a configure endpoint command. Only the context entries field matters, + * but we'll copy the whole thing anyway. + */ +void xhci_slot_copy(struct xhci_hcd *xhci, + struct xhci_container_ctx *in_ctx, + struct xhci_container_ctx *out_ctx) +{ + struct xhci_slot_ctx *in_slot_ctx; + struct xhci_slot_ctx *out_slot_ctx; + + in_slot_ctx = xhci_get_slot_ctx(xhci, in_ctx); + out_slot_ctx = xhci_get_slot_ctx(xhci, out_ctx); + + in_slot_ctx->dev_info = out_slot_ctx->dev_info; + in_slot_ctx->dev_info2 = out_slot_ctx->dev_info2; + in_slot_ctx->tt_info = out_slot_ctx->tt_info; + in_slot_ctx->dev_state = out_slot_ctx->dev_state; +} + +/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */ +static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) +{ + int i; + struct device *dev = xhci_to_hcd(xhci)->self.controller; + int num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2); + + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "Allocating %d scratchpad buffers", num_sp); + + if (!num_sp) + return 0; + + xhci->scratchpad = kzalloc(sizeof(*xhci->scratchpad), flags); + if (!xhci->scratchpad) + goto fail_sp; + + xhci->scratchpad->sp_array = dma_alloc_coherent(dev, + num_sp * sizeof(u64), + &xhci->scratchpad->sp_dma, flags); + if (!xhci->scratchpad->sp_array) + goto fail_sp2; + + xhci->scratchpad->sp_buffers = kzalloc(sizeof(void *) * num_sp, flags); + if (!xhci->scratchpad->sp_buffers) + goto fail_sp3; + + xhci->scratchpad->sp_dma_buffers = + kzalloc(sizeof(dma_addr_t) * num_sp, flags); + + if (!xhci->scratchpad->sp_dma_buffers) + goto fail_sp4; + + xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma); + for (i = 0; i < num_sp; i++) { + dma_addr_t dma; + void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma, + flags); + if (!buf) + goto fail_sp5; + + xhci->scratchpad->sp_array[i] = dma; + xhci->scratchpad->sp_buffers[i] = buf; + xhci->scratchpad->sp_dma_buffers[i] = dma; + } + + return 0; + + fail_sp5: + for (i = i - 1; i >= 0; i--) { + dma_free_coherent(dev, xhci->page_size, + xhci->scratchpad->sp_buffers[i], + xhci->scratchpad->sp_dma_buffers[i]); + } + kfree(xhci->scratchpad->sp_dma_buffers); + + fail_sp4: + kfree(xhci->scratchpad->sp_buffers); + + fail_sp3: + dma_free_coherent(dev, num_sp * sizeof(u64), + xhci->scratchpad->sp_array, + xhci->scratchpad->sp_dma); + + fail_sp2: + kfree(xhci->scratchpad); + xhci->scratchpad = NULL; + + fail_sp: + return -ENOMEM; +} + +static void scratchpad_free(struct xhci_hcd *xhci) +{ + int num_sp; + int i; + struct device *dev = xhci_to_hcd(xhci)->self.controller; + + if (!xhci->scratchpad) + return; + + num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2); + + for (i = 0; i < num_sp; i++) { + dma_free_coherent(dev, xhci->page_size, + xhci->scratchpad->sp_buffers[i], + xhci->scratchpad->sp_dma_buffers[i]); + } + kfree(xhci->scratchpad->sp_dma_buffers); + kfree(xhci->scratchpad->sp_buffers); + dma_free_coherent(dev, num_sp * sizeof(u64), + xhci->scratchpad->sp_array, + xhci->scratchpad->sp_dma); + kfree(xhci->scratchpad); + xhci->scratchpad = NULL; +} + +struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci, + bool allocate_in_ctx, bool allocate_completion, + gfp_t mem_flags) +{ + struct xhci_command *command; + + command = kzalloc(sizeof(*command), mem_flags); + if (!command) + return NULL; + + if (allocate_in_ctx) { + command->in_ctx = + xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, + mem_flags); + if (!command->in_ctx) { + kfree(command); + return NULL; + } + } + + if (allocate_completion) { + command->completion = + kzalloc(sizeof(struct completion), mem_flags); + if (!command->completion) { + xhci_free_container_ctx(xhci, command->in_ctx); + kfree(command); + return NULL; + } + init_completion(command->completion); + } + + command->status = 0; + INIT_LIST_HEAD(&command->cmd_list); + return command; +} + +void xhci_urb_free_priv(struct urb_priv *urb_priv) +{ + if (urb_priv) { + kfree(urb_priv->td[0]); + kfree(urb_priv); + } +} + +void xhci_free_command(struct xhci_hcd *xhci, + struct xhci_command *command) +{ + xhci_free_container_ctx(xhci, + command->in_ctx); + kfree(command->completion); + kfree(command); +} + +void xhci_mem_cleanup(struct xhci_hcd *xhci) +{ + struct device *dev = xhci_to_hcd(xhci)->self.controller; + int size; + int i, j, num_ports; + + del_timer_sync(&xhci->cmd_timer); + + /* Free the Event Ring Segment Table and the actual Event Ring */ + size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); + if (xhci->erst.entries) + dma_free_coherent(dev, size, + xhci->erst.entries, xhci->erst.erst_dma_addr); + xhci->erst.entries = NULL; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed ERST"); + if (xhci->event_ring) + xhci_ring_free(xhci, xhci->event_ring); + xhci->event_ring = NULL; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed event ring"); + + if (xhci->lpm_command) + xhci_free_command(xhci, xhci->lpm_command); + xhci->lpm_command = NULL; + if (xhci->cmd_ring) + xhci_ring_free(xhci, xhci->cmd_ring); + xhci->cmd_ring = NULL; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed command ring"); + xhci_cleanup_command_queue(xhci); + + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); + for (i = 0; i < num_ports && xhci->rh_bw; i++) { + struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table; + for (j = 0; j < XHCI_MAX_INTERVAL; j++) { + struct list_head *ep = &bwt->interval_bw[j].endpoints; + while (!list_empty(ep)) + list_del_init(ep->next); + } + } + + for (i = 1; i < MAX_HC_SLOTS; ++i) + xhci_free_virt_device(xhci, i); + + if (xhci->segment_pool) + dma_pool_destroy(xhci->segment_pool); + xhci->segment_pool = NULL; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed segment pool"); + + if (xhci->device_pool) + dma_pool_destroy(xhci->device_pool); + xhci->device_pool = NULL; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Freed device context pool"); + + if (xhci->small_streams_pool) + dma_pool_destroy(xhci->small_streams_pool); + xhci->small_streams_pool = NULL; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "Freed small stream array pool"); + + if (xhci->medium_streams_pool) + dma_pool_destroy(xhci->medium_streams_pool); + xhci->medium_streams_pool = NULL; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "Freed medium stream array pool"); + + if (xhci->dcbaa) + dma_free_coherent(dev, sizeof(*xhci->dcbaa), + xhci->dcbaa, xhci->dcbaa->dma); + xhci->dcbaa = NULL; + + scratchpad_free(xhci); + + if (!xhci->rh_bw) + goto no_bw; + + for (i = 0; i < num_ports; i++) { + struct xhci_tt_bw_info *tt, *n; + list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) { + list_del(&tt->tt_list); + kfree(tt); + } + } + +no_bw: + xhci->cmd_ring_reserved_trbs = 0; + xhci->num_usb2_ports = 0; + xhci->num_usb3_ports = 0; + xhci->num_active_eps = 0; + kfree(xhci->usb2_ports); + kfree(xhci->usb3_ports); + kfree(xhci->port_array); + kfree(xhci->rh_bw); + kfree(xhci->ext_caps); + + xhci->page_size = 0; + xhci->page_shift = 0; + xhci->bus_state[0].bus_suspended = 0; + xhci->bus_state[1].bus_suspended = 0; +} + +static int xhci_test_trb_in_td(struct xhci_hcd *xhci, + struct xhci_segment *input_seg, + union xhci_trb *start_trb, + union xhci_trb *end_trb, + dma_addr_t input_dma, + struct xhci_segment *result_seg, + char *test_name, int test_number) +{ + unsigned long long start_dma; + unsigned long long end_dma; + struct xhci_segment *seg; + + start_dma = xhci_trb_virt_to_dma(input_seg, start_trb); + end_dma = xhci_trb_virt_to_dma(input_seg, end_trb); + + seg = trb_in_td(xhci, input_seg, start_trb, end_trb, input_dma, false); + if (seg != result_seg) { + xhci_warn(xhci, "WARN: %s TRB math test %d failed!\n", + test_name, test_number); + xhci_warn(xhci, "Tested TRB math w/ seg %p and " + "input DMA 0x%llx\n", + input_seg, + (unsigned long long) input_dma); + xhci_warn(xhci, "starting TRB %p (0x%llx DMA), " + "ending TRB %p (0x%llx DMA)\n", + start_trb, start_dma, + end_trb, end_dma); + xhci_warn(xhci, "Expected seg %p, got seg %p\n", + result_seg, seg); + trb_in_td(xhci, input_seg, start_trb, end_trb, input_dma, + true); + return -1; + } + return 0; +} + +/* TRB math checks for xhci_trb_in_td(), using the command and event rings. */ +static int xhci_check_trb_in_td_math(struct xhci_hcd *xhci) +{ + struct { + dma_addr_t input_dma; + struct xhci_segment *result_seg; + } simple_test_vector [] = { + /* A zeroed DMA field should fail */ + { 0, NULL }, + /* One TRB before the ring start should fail */ + { xhci->event_ring->first_seg->dma - 16, NULL }, + /* One byte before the ring start should fail */ + { xhci->event_ring->first_seg->dma - 1, NULL }, + /* Starting TRB should succeed */ + { xhci->event_ring->first_seg->dma, xhci->event_ring->first_seg }, + /* Ending TRB should succeed */ + { xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT - 1)*16, + xhci->event_ring->first_seg }, + /* One byte after the ring end should fail */ + { xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT - 1)*16 + 1, NULL }, + /* One TRB after the ring end should fail */ + { xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT)*16, NULL }, + /* An address of all ones should fail */ + { (dma_addr_t) (~0), NULL }, + }; + struct { + struct xhci_segment *input_seg; + union xhci_trb *start_trb; + union xhci_trb *end_trb; + dma_addr_t input_dma; + struct xhci_segment *result_seg; + } complex_test_vector [] = { + /* Test feeding a valid DMA address from a different ring */ + { .input_seg = xhci->event_ring->first_seg, + .start_trb = xhci->event_ring->first_seg->trbs, + .end_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1], + .input_dma = xhci->cmd_ring->first_seg->dma, + .result_seg = NULL, + }, + /* Test feeding a valid end TRB from a different ring */ + { .input_seg = xhci->event_ring->first_seg, + .start_trb = xhci->event_ring->first_seg->trbs, + .end_trb = &xhci->cmd_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1], + .input_dma = xhci->cmd_ring->first_seg->dma, + .result_seg = NULL, + }, + /* Test feeding a valid start and end TRB from a different ring */ + { .input_seg = xhci->event_ring->first_seg, + .start_trb = xhci->cmd_ring->first_seg->trbs, + .end_trb = &xhci->cmd_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1], + .input_dma = xhci->cmd_ring->first_seg->dma, + .result_seg = NULL, + }, + /* TRB in this ring, but after this TD */ + { .input_seg = xhci->event_ring->first_seg, + .start_trb = &xhci->event_ring->first_seg->trbs[0], + .end_trb = &xhci->event_ring->first_seg->trbs[3], + .input_dma = xhci->event_ring->first_seg->dma + 4*16, + .result_seg = NULL, + }, + /* TRB in this ring, but before this TD */ + { .input_seg = xhci->event_ring->first_seg, + .start_trb = &xhci->event_ring->first_seg->trbs[3], + .end_trb = &xhci->event_ring->first_seg->trbs[6], + .input_dma = xhci->event_ring->first_seg->dma + 2*16, + .result_seg = NULL, + }, + /* TRB in this ring, but after this wrapped TD */ + { .input_seg = xhci->event_ring->first_seg, + .start_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 3], + .end_trb = &xhci->event_ring->first_seg->trbs[1], + .input_dma = xhci->event_ring->first_seg->dma + 2*16, + .result_seg = NULL, + }, + /* TRB in this ring, but before this wrapped TD */ + { .input_seg = xhci->event_ring->first_seg, + .start_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 3], + .end_trb = &xhci->event_ring->first_seg->trbs[1], + .input_dma = xhci->event_ring->first_seg->dma + (TRBS_PER_SEGMENT - 4)*16, + .result_seg = NULL, + }, + /* TRB not in this ring, and we have a wrapped TD */ + { .input_seg = xhci->event_ring->first_seg, + .start_trb = &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 3], + .end_trb = &xhci->event_ring->first_seg->trbs[1], + .input_dma = xhci->cmd_ring->first_seg->dma + 2*16, + .result_seg = NULL, + }, + }; + + unsigned int num_tests; + int i, ret; + + num_tests = ARRAY_SIZE(simple_test_vector); + for (i = 0; i < num_tests; i++) { + ret = xhci_test_trb_in_td(xhci, + xhci->event_ring->first_seg, + xhci->event_ring->first_seg->trbs, + &xhci->event_ring->first_seg->trbs[TRBS_PER_SEGMENT - 1], + simple_test_vector[i].input_dma, + simple_test_vector[i].result_seg, + "Simple", i); + if (ret < 0) + return ret; + } + + num_tests = ARRAY_SIZE(complex_test_vector); + for (i = 0; i < num_tests; i++) { + ret = xhci_test_trb_in_td(xhci, + complex_test_vector[i].input_seg, + complex_test_vector[i].start_trb, + complex_test_vector[i].end_trb, + complex_test_vector[i].input_dma, + complex_test_vector[i].result_seg, + "Complex", i); + if (ret < 0) + return ret; + } + xhci_dbg(xhci, "TRB math tests passed.\n"); + return 0; +} + +static void xhci_set_hc_event_deq(struct xhci_hcd *xhci) +{ + u64 temp; + dma_addr_t deq; + + deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, + xhci->event_ring->dequeue); + if (deq == 0 && !in_interrupt()) + xhci_warn(xhci, "WARN something wrong with SW event ring " + "dequeue ptr.\n"); + /* Update HC event ring dequeue pointer */ + temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + temp &= ERST_PTR_MASK; + /* Don't clear the EHB bit (which is RW1C) because + * there might be more events to service. + */ + temp &= ~ERST_EHB; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "// Write event ring dequeue pointer, " + "preserving EHB bit"); + xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp, + &xhci->ir_set->erst_dequeue); +} + +static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, + __le32 __iomem *addr, u8 major_revision, int max_caps) +{ + u32 temp, port_offset, port_count; + int i; + + if (major_revision > 0x03) { + xhci_warn(xhci, "Ignoring unknown port speed, " + "Ext Cap %p, revision = 0x%x\n", + addr, major_revision); + /* Ignoring port protocol we can't understand. FIXME */ + return; + } + + /* Port offset and count in the third dword, see section 7.2 */ + temp = readl(addr + 2); + port_offset = XHCI_EXT_PORT_OFF(temp); + port_count = XHCI_EXT_PORT_COUNT(temp); + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "Ext Cap %p, port offset = %u, " + "count = %u, revision = 0x%x", + addr, port_offset, port_count, major_revision); + /* Port count includes the current port offset */ + if (port_offset == 0 || (port_offset + port_count - 1) > num_ports) + /* WTF? "Valid values are ‘1’ to MaxPorts" */ + return; + + /* cache usb2 port capabilities */ + if (major_revision < 0x03 && xhci->num_ext_caps < max_caps) + xhci->ext_caps[xhci->num_ext_caps++] = temp; + + /* Check the host's USB2 LPM capability */ + if ((xhci->hci_version == 0x96) && (major_revision != 0x03) && + (temp & XHCI_L1C)) { + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "xHCI 0.96: support USB2 software lpm"); + xhci->sw_lpm_support = 1; + } + + if ((xhci->hci_version >= 0x100) && (major_revision != 0x03)) { + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "xHCI 1.0: support USB2 software lpm"); + xhci->sw_lpm_support = 1; + if (temp & XHCI_HLC) { + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "xHCI 1.0: support USB2 hardware lpm"); + xhci->hw_lpm_support = 1; + } + } + + port_offset--; + for (i = port_offset; i < (port_offset + port_count); i++) { + /* Duplicate entry. Ignore the port if the revisions differ. */ + if (xhci->port_array[i] != 0) { + xhci_warn(xhci, "Duplicate port entry, Ext Cap %p," + " port %u\n", addr, i); + xhci_warn(xhci, "Port was marked as USB %u, " + "duplicated as USB %u\n", + xhci->port_array[i], major_revision); + /* Only adjust the roothub port counts if we haven't + * found a similar duplicate. + */ + if (xhci->port_array[i] != major_revision && + xhci->port_array[i] != DUPLICATE_ENTRY) { + if (xhci->port_array[i] == 0x03) + xhci->num_usb3_ports--; + else + xhci->num_usb2_ports--; + xhci->port_array[i] = DUPLICATE_ENTRY; + } + /* FIXME: Should we disable the port? */ + continue; + } + xhci->port_array[i] = major_revision; + if (major_revision == 0x03) + xhci->num_usb3_ports++; + else + xhci->num_usb2_ports++; + } + /* FIXME: Should we disable ports not in the Extended Capabilities? */ +} + +/* + * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that + * specify what speeds each port is supposed to be. We can't count on the port + * speed bits in the PORTSC register being correct until a device is connected, + * but we need to set up the two fake roothubs with the correct number of USB + * 3.0 and USB 2.0 ports at host controller initialization time. + */ +static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags) +{ + __le32 __iomem *addr, *tmp_addr; + u32 offset, tmp_offset; + unsigned int num_ports; + int i, j, port_index; + int cap_count = 0; + + addr = &xhci->cap_regs->hcc_params; + offset = XHCI_HCC_EXT_CAPS(readl(addr)); + if (offset == 0) { + xhci_err(xhci, "No Extended Capability registers, " + "unable to set up roothub.\n"); + return -ENODEV; + } + + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); + xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags); + if (!xhci->port_array) + return -ENOMEM; + + xhci->rh_bw = kzalloc(sizeof(*xhci->rh_bw)*num_ports, flags); + if (!xhci->rh_bw) + return -ENOMEM; + for (i = 0; i < num_ports; i++) { + struct xhci_interval_bw_table *bw_table; + + INIT_LIST_HEAD(&xhci->rh_bw[i].tts); + bw_table = &xhci->rh_bw[i].bw_table; + for (j = 0; j < XHCI_MAX_INTERVAL; j++) + INIT_LIST_HEAD(&bw_table->interval_bw[j].endpoints); + } + + /* + * For whatever reason, the first capability offset is from the + * capability register base, not from the HCCPARAMS register. + * See section 5.3.6 for offset calculation. + */ + addr = &xhci->cap_regs->hc_capbase + offset; + + tmp_addr = addr; + tmp_offset = offset; + + /* count extended protocol capability entries for later caching */ + do { + u32 cap_id; + cap_id = readl(tmp_addr); + if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL) + cap_count++; + tmp_offset = XHCI_EXT_CAPS_NEXT(cap_id); + tmp_addr += tmp_offset; + } while (tmp_offset); + + xhci->ext_caps = kzalloc(sizeof(*xhci->ext_caps) * cap_count, flags); + if (!xhci->ext_caps) + return -ENOMEM; + + while (1) { + u32 cap_id; + + cap_id = readl(addr); + if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL) + xhci_add_in_port(xhci, num_ports, addr, + (u8) XHCI_EXT_PORT_MAJOR(cap_id), + cap_count); + offset = XHCI_EXT_CAPS_NEXT(cap_id); + if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports) + == num_ports) + break; + /* + * Once you're into the Extended Capabilities, the offset is + * always relative to the register holding the offset. + */ + addr += offset; + } + + if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) { + xhci_warn(xhci, "No ports on the roothubs?\n"); + return -ENODEV; + } + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "Found %u USB 2.0 ports and %u USB 3.0 ports.", + xhci->num_usb2_ports, xhci->num_usb3_ports); + + /* Place limits on the number of roothub ports so that the hub + * descriptors aren't longer than the USB core will allocate. + */ + if (xhci->num_usb3_ports > 15) { + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "Limiting USB 3.0 roothub ports to 15."); + xhci->num_usb3_ports = 15; + } + if (xhci->num_usb2_ports > USB_MAXCHILDREN) { + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "Limiting USB 2.0 roothub ports to %u.", + USB_MAXCHILDREN); + xhci->num_usb2_ports = USB_MAXCHILDREN; + } + + /* + * Note we could have all USB 3.0 ports, or all USB 2.0 ports. + * Not sure how the USB core will handle a hub with no ports... + */ + if (xhci->num_usb2_ports) { + xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)* + xhci->num_usb2_ports, flags); + if (!xhci->usb2_ports) + return -ENOMEM; + + port_index = 0; + for (i = 0; i < num_ports; i++) { + if (xhci->port_array[i] == 0x03 || + xhci->port_array[i] == 0 || + xhci->port_array[i] == DUPLICATE_ENTRY) + continue; + + xhci->usb2_ports[port_index] = + &xhci->op_regs->port_status_base + + NUM_PORT_REGS*i; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "USB 2.0 port at index %u, " + "addr = %p", i, + xhci->usb2_ports[port_index]); + port_index++; + if (port_index == xhci->num_usb2_ports) + break; + } + } + if (xhci->num_usb3_ports) { + xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)* + xhci->num_usb3_ports, flags); + if (!xhci->usb3_ports) + return -ENOMEM; + + port_index = 0; + for (i = 0; i < num_ports; i++) + if (xhci->port_array[i] == 0x03) { + xhci->usb3_ports[port_index] = + &xhci->op_regs->port_status_base + + NUM_PORT_REGS*i; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "USB 3.0 port at index %u, " + "addr = %p", i, + xhci->usb3_ports[port_index]); + port_index++; + if (port_index == xhci->num_usb3_ports) + break; + } + } + return 0; +} + +int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) +{ + dma_addr_t dma; + struct device *dev = xhci_to_hcd(xhci)->self.controller; + unsigned int val, val2; + u64 val_64; + struct xhci_segment *seg; + u32 page_size, temp; + int i; + + INIT_LIST_HEAD(&xhci->cmd_list); + + page_size = readl(&xhci->op_regs->page_size); + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "Supported page size register = 0x%x", page_size); + for (i = 0; i < 16; i++) { + if ((0x1 & page_size) != 0) + break; + page_size = page_size >> 1; + } + if (i < 16) + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "Supported page size of %iK", (1 << (i+12)) / 1024); + else + xhci_warn(xhci, "WARN: no supported page size\n"); + /* Use 4K pages, since that's common and the minimum the HC supports */ + xhci->page_shift = 12; + xhci->page_size = 1 << xhci->page_shift; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "HCD page size set to %iK", xhci->page_size / 1024); + + /* + * Program the Number of Device Slots Enabled field in the CONFIG + * register with the max value of slots the HC can handle. + */ + val = HCS_MAX_SLOTS(readl(&xhci->cap_regs->hcs_params1)); + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "// xHC can handle at most %d device slots.", val); + val2 = readl(&xhci->op_regs->config_reg); + val |= (val2 & ~HCS_SLOTS_MASK); + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "// Setting Max device slots reg = 0x%x.", val); + writel(val, &xhci->op_regs->config_reg); + + /* + * Section 5.4.8 - doorbell array must be + * "physically contiguous and 64-byte (cache line) aligned". + */ + xhci->dcbaa = dma_alloc_coherent(dev, sizeof(*xhci->dcbaa), &dma, + GFP_KERNEL); + if (!xhci->dcbaa) + goto fail; + memset(xhci->dcbaa, 0, sizeof *(xhci->dcbaa)); + xhci->dcbaa->dma = dma; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "// Device context base array address = 0x%llx (DMA), %p (virt)", + (unsigned long long)xhci->dcbaa->dma, xhci->dcbaa); + xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr); + + /* + * Initialize the ring segment pool. The ring must be a contiguous + * structure comprised of TRBs. The TRBs must be 16 byte aligned, + * however, the command ring segment needs 64-byte aligned segments + * and our use of dma addresses in the trb_address_map radix tree needs + * TRB_SEGMENT_SIZE alignment, so we pick the greater alignment need. + */ + xhci->segment_pool = dma_pool_create("xHCI ring segments", dev, + TRB_SEGMENT_SIZE, TRB_SEGMENT_SIZE, xhci->page_size); + + /* See Table 46 and Note on Figure 55 */ + xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev, + 2112, 64, xhci->page_size); + if (!xhci->segment_pool || !xhci->device_pool) + goto fail; + + /* Linear stream context arrays don't have any boundary restrictions, + * and only need to be 16-byte aligned. + */ + xhci->small_streams_pool = + dma_pool_create("xHCI 256 byte stream ctx arrays", + dev, SMALL_STREAM_ARRAY_SIZE, 16, 0); + xhci->medium_streams_pool = + dma_pool_create("xHCI 1KB stream ctx arrays", + dev, MEDIUM_STREAM_ARRAY_SIZE, 16, 0); + /* Any stream context array bigger than MEDIUM_STREAM_ARRAY_SIZE + * will be allocated with dma_alloc_coherent() + */ + + if (!xhci->small_streams_pool || !xhci->medium_streams_pool) + goto fail; + + /* Set up the command ring to have one segments for now. */ + xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags); + if (!xhci->cmd_ring) + goto fail; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "Allocated command ring at %p", xhci->cmd_ring); + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "First segment DMA is 0x%llx", + (unsigned long long)xhci->cmd_ring->first_seg->dma); + + /* Set the address in the Command Ring Control register */ + val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); + val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | + (xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) | + xhci->cmd_ring->cycle_state; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "// Setting command ring address to 0x%x", val); + xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); + xhci_dbg_cmd_ptrs(xhci); + + xhci->lpm_command = xhci_alloc_command(xhci, true, true, flags); + if (!xhci->lpm_command) + goto fail; + + /* Reserve one command ring TRB for disabling LPM. + * Since the USB core grabs the shared usb_bus bandwidth mutex before + * disabling LPM, we only need to reserve one TRB for all devices. + */ + xhci->cmd_ring_reserved_trbs++; + + val = readl(&xhci->cap_regs->db_off); + val &= DBOFF_MASK; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "// Doorbell array is located at offset 0x%x" + " from cap regs base addr", val); + xhci->dba = (void __iomem *) xhci->cap_regs + val; + xhci_dbg_regs(xhci); + xhci_print_run_regs(xhci); + /* Set ir_set to interrupt register set 0 */ + xhci->ir_set = &xhci->run_regs->ir_set[0]; + + /* + * Event ring setup: Allocate a normal ring, but also setup + * the event ring segment table (ERST). Section 4.9.3. + */ + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Allocating event ring"); + xhci->event_ring = xhci_ring_alloc(xhci, ERST_NUM_SEGS, 1, TYPE_EVENT, + flags); + if (!xhci->event_ring) + goto fail; + if (xhci_check_trb_in_td_math(xhci) < 0) + goto fail; + + xhci->erst.entries = dma_alloc_coherent(dev, + sizeof(struct xhci_erst_entry) * ERST_NUM_SEGS, &dma, + GFP_KERNEL); + if (!xhci->erst.entries) + goto fail; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "// Allocated event ring segment table at 0x%llx", + (unsigned long long)dma); + + memset(xhci->erst.entries, 0, sizeof(struct xhci_erst_entry)*ERST_NUM_SEGS); + xhci->erst.num_entries = ERST_NUM_SEGS; + xhci->erst.erst_dma_addr = dma; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "Set ERST to 0; private num segs = %i, virt addr = %p, dma addr = 0x%llx", + xhci->erst.num_entries, + xhci->erst.entries, + (unsigned long long)xhci->erst.erst_dma_addr); + + /* set ring base address and size for each segment table entry */ + for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) { + struct xhci_erst_entry *entry = &xhci->erst.entries[val]; + entry->seg_addr = cpu_to_le64(seg->dma); + entry->seg_size = cpu_to_le32(TRBS_PER_SEGMENT); + entry->rsvd = 0; + seg = seg->next; + } + + /* set ERST count with the number of entries in the segment table */ + val = readl(&xhci->ir_set->erst_size); + val &= ERST_SIZE_MASK; + val |= ERST_NUM_SEGS; + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "// Write ERST size = %i to ir_set 0 (some bits preserved)", + val); + writel(val, &xhci->ir_set->erst_size); + + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "// Set ERST entries to point to event ring."); + /* set the segment table base address */ + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "// Set ERST base address for ir_set 0 = 0x%llx", + (unsigned long long)xhci->erst.erst_dma_addr); + val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base); + val_64 &= ERST_PTR_MASK; + val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK); + xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base); + + /* Set the event ring dequeue address */ + xhci_set_hc_event_deq(xhci); + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "Wrote ERST address to ir_set 0."); + xhci_print_ir_set(xhci, 0); + + /* init command timeout timer */ + setup_timer(&xhci->cmd_timer, xhci_handle_command_timeout, + (unsigned long)xhci); + + /* + * XXX: Might need to set the Interrupter Moderation Register to + * something other than the default (~1ms minimum between interrupts). + * See section 5.5.1.2. + */ + init_completion(&xhci->addr_dev); + for (i = 0; i < MAX_HC_SLOTS; ++i) + xhci->devs[i] = NULL; + for (i = 0; i < USB_MAXCHILDREN; ++i) { + xhci->bus_state[0].resume_done[i] = 0; + xhci->bus_state[1].resume_done[i] = 0; + /* Only the USB 2.0 completions will ever be used. */ + init_completion(&xhci->bus_state[1].rexit_done[i]); + } + + if (scratchpad_alloc(xhci, flags)) + goto fail; + if (xhci_setup_port_arrays(xhci, flags)) + goto fail; + + /* Enable USB 3.0 device notifications for function remote wake, which + * is necessary for allowing USB 3.0 devices to do remote wakeup from + * U3 (device suspend). + */ + temp = readl(&xhci->op_regs->dev_notification); + temp &= ~DEV_NOTE_MASK; + temp |= DEV_NOTE_FWAKE; + writel(temp, &xhci->op_regs->dev_notification); + + return 0; + +fail: + xhci_warn(xhci, "Couldn't initialize memory\n"); + xhci_halt(xhci); + xhci_reset(xhci); + xhci_mem_cleanup(xhci); + return -ENOMEM; +}