X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fusb%2Fhost%2Fohci-sa1111.c;fp=kernel%2Fdrivers%2Fusb%2Fhost%2Fohci-sa1111.c;h=2ac266d692a2960acb400773738014eb728933b8;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/usb/host/ohci-sa1111.c b/kernel/drivers/usb/host/ohci-sa1111.c new file mode 100644 index 000000000..2ac266d69 --- /dev/null +++ b/kernel/drivers/usb/host/ohci-sa1111.c @@ -0,0 +1,265 @@ +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * (C) Copyright 1999 Roman Weissgaerber + * (C) Copyright 2000-2002 David Brownell + * (C) Copyright 2002 Hewlett-Packard Company + * + * SA1111 Bus Glue + * + * Written by Christopher Hoover + * Based on fragments of previous driver by Russell King et al. + * + * This file is licenced under the GPL. + */ + +#include +#include +#include +#include + +#ifndef CONFIG_SA1111 +#error "This file is SA-1111 bus glue. CONFIG_SA1111 must be defined." +#endif + +#define USB_STATUS 0x0118 +#define USB_RESET 0x011c +#define USB_IRQTEST 0x0120 + +#define USB_RESET_FORCEIFRESET (1 << 0) +#define USB_RESET_FORCEHCRESET (1 << 1) +#define USB_RESET_CLKGENRESET (1 << 2) +#define USB_RESET_SIMSCALEDOWN (1 << 3) +#define USB_RESET_USBINTTEST (1 << 4) +#define USB_RESET_SLEEPSTBYEN (1 << 5) +#define USB_RESET_PWRSENSELOW (1 << 6) +#define USB_RESET_PWRCTRLLOW (1 << 7) + +#define USB_STATUS_IRQHCIRMTWKUP (1 << 7) +#define USB_STATUS_IRQHCIBUFFACC (1 << 8) +#define USB_STATUS_NIRQHCIM (1 << 9) +#define USB_STATUS_NHCIMFCLR (1 << 10) +#define USB_STATUS_USBPWRSENSE (1 << 11) + +#if 0 +static void dump_hci_status(struct usb_hcd *hcd, const char *label) +{ + unsigned long status = sa1111_readl(hcd->regs + USB_STATUS); + + printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label, + ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""), + ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""), + ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "), + ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "), + ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : "")); +} +#endif + +static int ohci_sa1111_reset(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + ohci_hcd_init(ohci); + return ohci_init(ohci); +} + +static int ohci_sa1111_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + ret = ohci_run(ohci); + if (ret < 0) { + ohci_err(ohci, "can't start\n"); + ohci_stop(hcd); + } + return ret; +} + +static const struct hc_driver ohci_sa1111_hc_driver = { + .description = hcd_name, + .product_desc = "SA-1111 OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .reset = ohci_sa1111_reset, + .start = ohci_sa1111_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +static int sa1111_start_hc(struct sa1111_dev *dev) +{ + unsigned int usb_rst = 0; + int ret; + + dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n"); + + if (machine_is_xp860() || + machine_has_neponset() || + machine_is_pfs168() || + machine_is_badge4()) + usb_rst = USB_RESET_PWRSENSELOW | USB_RESET_PWRCTRLLOW; + + /* + * Configure the power sense and control lines. Place the USB + * host controller in reset. + */ + sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET, + dev->mapbase + USB_RESET); + + /* + * Now, carefully enable the USB clock, and take + * the USB host controller out of reset. + */ + ret = sa1111_enable_device(dev); + if (ret == 0) { + udelay(11); + sa1111_writel(usb_rst, dev->mapbase + USB_RESET); + } + + return ret; +} + +static void sa1111_stop_hc(struct sa1111_dev *dev) +{ + unsigned int usb_rst; + + dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n"); + + /* + * Put the USB host controller into reset. + */ + usb_rst = sa1111_readl(dev->mapbase + USB_RESET); + sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET, + dev->mapbase + USB_RESET); + + /* + * Stop the USB clock. + */ + sa1111_disable_device(dev); +} + +/** + * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs + * + * Allocates basic resources for this USB host controller, and + * then invokes the start() method for the HCD associated with it. + */ +static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev) +{ + struct usb_hcd *hcd; + int ret; + + if (usb_disabled()) + return -ENODEV; + + /* + * We don't call dma_set_mask_and_coherent() here because the + * DMA mask has already been appropraitely setup by the core + * SA-1111 bus code (which includes bug workarounds.) + */ + + hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111"); + if (!hcd) + return -ENOMEM; + + hcd->rsrc_start = dev->res.start; + hcd->rsrc_len = resource_size(&dev->res); + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { + dev_dbg(&dev->dev, "request_mem_region failed\n"); + ret = -EBUSY; + goto err1; + } + + hcd->regs = dev->mapbase; + + ret = sa1111_start_hc(dev); + if (ret) + goto err2; + + ret = usb_add_hcd(hcd, dev->irq[1], 0); + if (ret == 0) { + device_wakeup_enable(hcd->self.controller); + return ret; + } + + sa1111_stop_hc(dev); + err2: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + err1: + usb_put_hcd(hcd); + return ret; +} + +/** + * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs + * @dev: USB Host Controller being removed + * + * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking + * the HCD's stop() method. + */ +static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev) +{ + struct usb_hcd *hcd = sa1111_get_drvdata(dev); + + usb_remove_hcd(hcd); + sa1111_stop_hc(dev); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + + return 0; +} + +static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev) +{ + struct usb_hcd *hcd = sa1111_get_drvdata(dev); + + if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + hcd->driver->shutdown(hcd); + sa1111_stop_hc(dev); + } +} + +static struct sa1111_driver ohci_hcd_sa1111_driver = { + .drv = { + .name = "sa1111-ohci", + .owner = THIS_MODULE, + }, + .devid = SA1111_DEVID_USB, + .probe = ohci_hcd_sa1111_probe, + .remove = ohci_hcd_sa1111_remove, + .shutdown = ohci_hcd_sa1111_shutdown, +};