X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=kernel%2Fdrivers%2Fusb%2Fgadget%2FKconfig;fp=kernel%2Fdrivers%2Fusb%2Fgadget%2FKconfig;h=bcf83c0a6e62b340899ea661955de89bbfc9df11;hb=9ca8dbcc65cfc63d6f5ef3312a33184e1d726e00;hp=0000000000000000000000000000000000000000;hpb=98260f3884f4a202f9ca5eabed40b1354c489b29;p=kvmfornfv.git diff --git a/kernel/drivers/usb/gadget/Kconfig b/kernel/drivers/usb/gadget/Kconfig new file mode 100644 index 000000000..bcf83c0a6 --- /dev/null +++ b/kernel/drivers/usb/gadget/Kconfig @@ -0,0 +1,458 @@ +# +# USB Gadget support on a system involves +# (a) a peripheral controller, and +# (b) the gadget driver using it. +# +# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! +# +# - Host systems (like PCs) need CONFIG_USB (with "A" jacks). +# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). +# - Some systems have both kinds of controllers. +# +# With help from a special transceiver and a "Mini-AB" jack, systems with +# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). +# + +menuconfig USB_GADGET + tristate "USB Gadget Support" + select NLS + help + USB is a master/slave protocol, organized with one master + host (such as a PC) controlling up to 127 peripheral devices. + The USB hardware is asymmetric, which makes it easier to set up: + you can't connect a "to-the-host" connector to a peripheral. + + Linux can run in the host, or in the peripheral. In both cases + you need a low level bus controller driver, and some software + talking to it. Peripheral controllers are often discrete silicon, + or are integrated with the CPU in a microcontroller. The more + familiar host side controllers have names like "EHCI", "OHCI", + or "UHCI", and are usually integrated into southbridges on PC + motherboards. + + Enable this configuration option if you want to run Linux inside + a USB peripheral device. Configure one hardware driver for your + peripheral/device side bus controller, and a "gadget driver" for + your peripheral protocol. (If you use modular gadget drivers, + you may configure more than one.) + + If in doubt, say "N" and don't enable these drivers; most people + don't have this kind of hardware (except maybe inside Linux PDAs). + + For more information, see and + the kernel DocBook documentation for this API. + +if USB_GADGET + +config USB_GADGET_DEBUG + bool "Debugging messages (DEVELOPMENT)" + depends on DEBUG_KERNEL + help + Many controller and gadget drivers will print some debugging + messages if you use this option to ask for those messages. + + Avoid enabling these messages, even if you're actively + debugging such a driver. Many drivers will emit so many + messages that the driver timings are affected, which will + either create new failure modes or remove the one you're + trying to track down. Never enable these messages for a + production build. + +config USB_GADGET_VERBOSE + bool "Verbose debugging Messages (DEVELOPMENT)" + depends on USB_GADGET_DEBUG + help + Many controller and gadget drivers will print verbose debugging + messages if you use this option to ask for those messages. + + Avoid enabling these messages, even if you're actively + debugging such a driver. Many drivers will emit so many + messages that the driver timings are affected, which will + either create new failure modes or remove the one you're + trying to track down. Never enable these messages for a + production build. + +config USB_GADGET_DEBUG_FILES + bool "Debugging information files (DEVELOPMENT)" + depends on PROC_FS + help + Some of the drivers in the "gadget" framework can expose + debugging information in files such as /proc/driver/udc + (for a peripheral controller). The information in these + files may help when you're troubleshooting or bringing up a + driver on a new board. Enable these files by choosing "Y" + here. If in doubt, or to conserve kernel memory, say "N". + +config USB_GADGET_DEBUG_FS + bool "Debugging information files in debugfs (DEVELOPMENT)" + depends on DEBUG_FS + help + Some of the drivers in the "gadget" framework can expose + debugging information in files under /sys/kernel/debug/. + The information in these files may help when you're + troubleshooting or bringing up a driver on a new board. + Enable these files by choosing "Y" here. If in doubt, or + to conserve kernel memory, say "N". + +config USB_GADGET_VBUS_DRAW + int "Maximum VBUS Power usage (2-500 mA)" + range 2 500 + default 2 + help + Some devices need to draw power from USB when they are + configured, perhaps to operate circuitry or to recharge + batteries. This is in addition to any local power supply, + such as an AC adapter or batteries. + + Enter the maximum power your device draws through USB, in + milliAmperes. The permitted range of values is 2 - 500 mA; + 0 mA would be legal, but can make some hosts misbehave. + + This value will be used except for system-specific gadget + drivers that have more specific information. + +config USB_GADGET_STORAGE_NUM_BUFFERS + int "Number of storage pipeline buffers" + range 2 4 + default 2 + help + Usually 2 buffers are enough to establish a good buffering + pipeline. The number may be increased in order to compensate + for a bursty VFS behaviour. For instance there may be CPU wake up + latencies that makes the VFS to appear bursty in a system with + an CPU on-demand governor. Especially if DMA is doing IO to + offload the CPU. In this case the CPU will go into power + save often and spin up occasionally to move data within VFS. + If selecting USB_GADGET_DEBUG_FILES this value may be set by + a module parameter as well. + If unsure, say 2. + +source "drivers/usb/gadget/udc/Kconfig" + +# +# USB Gadget Drivers +# + +# composite based drivers +config USB_LIBCOMPOSITE + tristate + select CONFIGFS_FS + depends on USB_GADGET + +config USB_F_ACM + tristate + +config USB_F_SS_LB + tristate + +config USB_U_SERIAL + tristate + +config USB_U_ETHER + tristate + +config USB_F_SERIAL + tristate + +config USB_F_OBEX + tristate + +config USB_F_NCM + tristate + +config USB_F_ECM + tristate + +config USB_F_PHONET + tristate + +config USB_F_EEM + tristate + +config USB_F_SUBSET + tristate + +config USB_F_RNDIS + tristate + +config USB_F_MASS_STORAGE + tristate + +config USB_F_FS + tristate + +config USB_F_UAC1 + tristate + +config USB_F_UAC2 + tristate + +config USB_F_UVC + tristate + +config USB_F_MIDI + tristate + +config USB_F_HID + tristate + +config USB_F_PRINTER + tristate + +choice + tristate "USB Gadget Drivers" + default USB_ETH + help + A Linux "Gadget Driver" talks to the USB Peripheral Controller + driver through the abstract "gadget" API. Some other operating + systems call these "client" drivers, of which "class drivers" + are a subset (implementing a USB device class specification). + A gadget driver implements one or more USB functions using + the peripheral hardware. + + Gadget drivers are hardware-neutral, or "platform independent", + except that they sometimes must understand quirks or limitations + of the particular controllers they work with. For example, when + a controller doesn't support alternate configurations or provide + enough of the right types of endpoints, the gadget driver might + not be able work with that controller, or might need to implement + a less common variant of a device class protocol. + +# this first set of drivers all depend on bulk-capable hardware. + +config USB_CONFIGFS + tristate "USB functions configurable through configfs" + select USB_LIBCOMPOSITE + help + A Linux USB "gadget" can be set up through configfs. + If this is the case, the USB functions (which from the host's + perspective are seen as interfaces) and configurations are + specified simply by creating appropriate directories in configfs. + Associating functions with configurations is done by creating + appropriate symbolic links. + For more information see Documentation/usb/gadget_configfs.txt. + +config USB_CONFIGFS_SERIAL + bool "Generic serial bulk in/out" + depends on USB_CONFIGFS + depends on TTY + select USB_U_SERIAL + select USB_F_SERIAL + help + The function talks to the Linux-USB generic serial driver. + +config USB_CONFIGFS_ACM + bool "Abstract Control Model (CDC ACM)" + depends on USB_CONFIGFS + depends on TTY + select USB_U_SERIAL + select USB_F_ACM + help + ACM serial link. This function can be used to interoperate with + MS-Windows hosts or with the Linux-USB "cdc-acm" driver. + +config USB_CONFIGFS_OBEX + bool "Object Exchange Model (CDC OBEX)" + depends on USB_CONFIGFS + depends on TTY + select USB_U_SERIAL + select USB_F_OBEX + help + You will need a user space OBEX server talking to /dev/ttyGS*, + since the kernel itself doesn't implement the OBEX protocol. + +config USB_CONFIGFS_NCM + bool "Network Control Model (CDC NCM)" + depends on USB_CONFIGFS + depends on NET + select USB_U_ETHER + select USB_F_NCM + help + NCM is an advanced protocol for Ethernet encapsulation, allows + grouping of several ethernet frames into one USB transfer and + different alignment possibilities. + +config USB_CONFIGFS_ECM + bool "Ethernet Control Model (CDC ECM)" + depends on USB_CONFIGFS + depends on NET + select USB_U_ETHER + select USB_F_ECM + help + The "Communication Device Class" (CDC) Ethernet Control Model. + That protocol is often avoided with pure Ethernet adapters, in + favor of simpler vendor-specific hardware, but is widely + supported by firmware for smart network devices. + +config USB_CONFIGFS_ECM_SUBSET + bool "Ethernet Control Model (CDC ECM) subset" + depends on USB_CONFIGFS + depends on NET + select USB_U_ETHER + select USB_F_SUBSET + help + On hardware that can't implement the full protocol, + a simple CDC subset is used, placing fewer demands on USB. + +config USB_CONFIGFS_RNDIS + bool "RNDIS" + depends on USB_CONFIGFS + depends on NET + select USB_U_ETHER + select USB_F_RNDIS + help + Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, + and Microsoft provides redistributable binary RNDIS drivers for + older versions of Windows. + + To make MS-Windows work with this, use Documentation/usb/linux.inf + as the "driver info file". For versions of MS-Windows older than + XP, you'll need to download drivers from Microsoft's website; a URL + is given in comments found in that info file. + +config USB_CONFIGFS_EEM + bool "Ethernet Emulation Model (EEM)" + depends on USB_CONFIGFS + depends on NET + select USB_U_ETHER + select USB_F_EEM + help + CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM + and therefore can be supported by more hardware. Technically ECM and + EEM are designed for different applications. The ECM model extends + the network interface to the target (e.g. a USB cable modem), and the + EEM model is for mobile devices to communicate with hosts using + ethernet over USB. For Linux gadgets, however, the interface with + the host is the same (a usbX device), so the differences are minimal. + +config USB_CONFIGFS_PHONET + bool "Phonet protocol" + depends on USB_CONFIGFS + depends on NET + depends on PHONET + select USB_U_ETHER + select USB_F_PHONET + help + The Phonet protocol implementation for USB device. + +config USB_CONFIGFS_MASS_STORAGE + bool "Mass storage" + depends on USB_CONFIGFS + depends on BLOCK + select USB_F_MASS_STORAGE + help + The Mass Storage Gadget acts as a USB Mass Storage disk drive. + As its storage repository it can use a regular file or a block + device (in much the same way as the "loop" device driver), + specified as a module parameter or sysfs option. + +config USB_CONFIGFS_F_LB_SS + bool "Loopback and sourcesink function (for testing)" + depends on USB_CONFIGFS + select USB_F_SS_LB + help + Loopback function loops back a configurable number of transfers. + Sourcesink function either sinks and sources bulk data. + It also implements control requests, for "chapter 9" conformance. + Make this be the first driver you try using on top of any new + USB peripheral controller driver. Then you can use host-side + test software, like the "usbtest" driver, to put your hardware + and its driver through a basic set of functional tests. + +config USB_CONFIGFS_F_FS + bool "Function filesystem (FunctionFS)" + depends on USB_CONFIGFS + select USB_F_FS + help + The Function Filesystem (FunctionFS) lets one create USB + composite functions in user space in the same way GadgetFS + lets one create USB gadgets in user space. This allows creation + of composite gadgets such that some of the functions are + implemented in kernel space (for instance Ethernet, serial or + mass storage) and other are implemented in user space. + +config USB_CONFIGFS_F_UAC1 + bool "Audio Class 1.0" + depends on USB_CONFIGFS + depends on SND + select USB_LIBCOMPOSITE + select SND_PCM + select USB_F_UAC1 + help + This Audio function implements 1 AudioControl interface, + 1 AudioStreaming Interface each for USB-OUT and USB-IN. + This driver requires a real Audio codec to be present + on the device. + +config USB_CONFIGFS_F_UAC2 + bool "Audio Class 2.0" + depends on USB_CONFIGFS + depends on SND + select USB_LIBCOMPOSITE + select SND_PCM + select USB_F_UAC2 + help + This Audio function is compatible with USB Audio Class + specification 2.0. It implements 1 AudioControl interface, + 1 AudioStreaming Interface each for USB-OUT and USB-IN. + This driver doesn't expect any real Audio codec to be present + on the device - the audio streams are simply sinked to and + sourced from a virtual ALSA sound card created. The user-space + application may choose to do whatever it wants with the data + received from the USB Host and choose to provide whatever it + wants as audio data to the USB Host. + +config USB_CONFIGFS_F_MIDI + bool "MIDI function" + depends on USB_CONFIGFS + depends on SND + select USB_LIBCOMPOSITE + select SND_RAWMIDI + select USB_F_MIDI + help + The MIDI Function acts as a USB Audio device, with one MIDI + input and one MIDI output. These MIDI jacks appear as + a sound "card" in the ALSA sound system. Other MIDI + connections can then be made on the gadget system, using + ALSA's aconnect utility etc. + +config USB_CONFIGFS_F_HID + bool "HID function" + depends on USB_CONFIGFS + select USB_F_HID + help + The HID function driver provides generic emulation of USB + Human Interface Devices (HID). + + For more information, see Documentation/usb/gadget_hid.txt. + +config USB_CONFIGFS_F_UVC + bool "USB Webcam function" + depends on USB_CONFIGFS + depends on VIDEO_DEV + select VIDEOBUF2_VMALLOC + select USB_F_UVC + help + The Webcam function acts as a composite USB Audio and Video Class + device. It provides a userspace API to process UVC control requests + and stream video data to the host. + +config USB_CONFIGFS_F_PRINTER + bool "Printer function" + select USB_F_PRINTER + depends on USB_CONFIGFS + help + The Printer function channels data between the USB host and a + userspace program driving the print engine. The user space + program reads and writes the device file /dev/g_printer to + receive or send printer data. It can use ioctl calls to + the device file to get or set printer status. + + For more information, see Documentation/usb/gadget_printer.txt + which includes sample code for accessing the device file. + +source "drivers/usb/gadget/legacy/Kconfig" + +endchoice + +endif # USB_GADGET